Netgear WNR1000v2 WNR1000v2 User Manual - Page 20
Configuring Your Internet Settings Using the Setup Wizard - password
View all Netgear WNR1000v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Wireless-N 150 Router WNR1000v2 User Manual To specify a language to be used on your router manager screens, do the following: 1. Expand the list and select the language you want. 2. Click Apply. The language you select is then downloaded and displayed in the language selection box, and your screen display will be in the selected language. Note: You can select from the entire list of supported languages only when the router is connected to the Internet. When the router is not connected to the Internet, you can select one of the stored languages only. Configuring Your Internet Settings Using the Setup Wizard You can manually configure your Internet connection using the Basic Settings screen, or you can allow the Setup Wizard to determine your Internet Service Provider (ISP) configuration. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. To use the Setup Wizard to assist with configuration or to verify the Internet connection settings: 1. Select Setup Wizard from the top of the main menu. 2. Click Next to proceed. Enter your ISP settings, as needed. 3. At the end of the Setup Wizard, click Test to verify your Internet connection. If you have trouble connecting to the Internet, see Chapter 7, "Troubleshooting." Viewing and Configuring Basic Internet Settings Settings related to your Internet service are specified in the Basic Settings screen. Select Basic Settings under Setup in the main menu. The content you see in the Basic Settings screen depends on whether your ISP requires that you log in with a user name and password for Internet access. 1-6 Configuring Basic Connectivity v1.0, September 2009