Netgear WNR1000v2 WNR1000v2 User Manual - Page 27
Wireless Settings, Enable Wireless Router Radio, Enable SSID Broadcast, Enable, Setup Access List
View all Netgear WNR1000v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Wireless-N 150 Router WNR1000v2 User Manual 6. Select Wireless Settings under Advanced in the main menu of the WNR1000v2 router. Figure 1-11 7. Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable WMM check boxes are selected. 8. Click Setup Access List. 9. Make sure that the Turn Access Control On check box is not selected. 10. Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you specified in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the router. Once your computer has basic wireless connectivity to the router, you can configure the advanced wireless security functions of the computer and router (for more information about security and these settings, see Chapter 2, "Safeguarding Your Network "). Configuring Basic Connectivity v1.0, September 2009 1-13