Home » Netgear Manuals » Modems » Netgear WNR1000v2 » Manual Viewer

Netgear WNR1000v2 WNR1000v2 User Manual - Page 81

Turn UPnP On, Advertisement Period, Advertisement Time To Live, UPnP Portmap Table, Apply - update

Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Wireless-N 150 Router WNR1000v2 User Manual 1. Select UPnP under Advanced the main menu. The UPnP screen displays. Figure 5-7 2. The available settings and information displayed in this screen are: • Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is disabled. If this check box is not selected, the router does not allow any device to automatically control the resources, such as port forwarding (mapping) of the router. • Advertisement Period. The advertisement period is how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of additional network traffic. Longer durations might compromise the freshness of the device status but can significantly reduce network traffic. • Advertisement Time To Live. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. The time to live hop count is the number of steps a broadcast packet is allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, then it might be necessary to increase this value. • UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the router and which ports (Internal and External) that device has opened. The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address. 3. Click Apply to save your settings. Fine-Tuning Your Network v1.0, September 2009 5-13

Section	Page
Wireless-N 150 Router WNR1000v2 User Manual	1
Contents	7
About This Manual	11
Chapter 1 Configuring Basic Connectivity	15
Using the Setup Manual	15
Logging In To Your Wireless Router	16
Selecting a Language for Your Screen Display	19
Configuring Your Internet Settings Using the Setup Wizard	20
Viewing and Configuring Basic Internet Settings	20
Your Internet Connection Does Not Require a Login	21
Your Internet Connection Does Require a Login	23
Setting Up and Testing Basic Wireless Connectivity	25
Chapter 2 Safeguarding Your Network	29
Choosing Appropriate Wireless Security	29
Recording Basic Wireless Settings Setup Information	33
Changing Wireless Security Settings	34
Viewing Basic Wireless Settings	34
Configuring WEP Wireless Security	36
Configuring WPA-PSK and WPA2-PSK Wireless Security	38
Viewing Advanced Wireless Settings	39
Using Push 'N' Connect (Wi-Fi Protected Setup)	41
Push Button Configuration	41
Security PIN Entry	43
Configuring the WPS Settings	44
Connecting Additional Wireless Client Devices after WPS Setup	45
Restricting Wireless Access by MAC Address	46
Changing the Administrator Password	48
Backing Up Your Configuration	49
Understanding Your Firewall	50
Chapter 3 Restricting Access From Your Network	51
Content Filtering Overview	51
Blocking Access to Internet Sites	51
Blocking Access to Internet Services	53
Blocking Services by IP Address Range	55
Scheduling Blocking	55
Viewing Logs of Web Access or Attempted Web Access	56
Configuring E-mail Alert and Web Access Log Notifications	57
Setting the Time Zone	58
Chapter 4 Customizing Your Network Settings	59
Using the LAN IP Setup Options	59
Configuring a Device Name	60
Configuring LAN TCP/IP Setup Parameters	60
Using the Router as a DHCP Server	61
Using Address Reservation	62
Using a Dynamic DNS Service	63
Configuring the WAN Setup Options	64
Disabling the SPI Firewall	64
Setting Up a Default DMZ Server	65
Responding to a Ping on the Internet (WAN) Port	65
Setting the MTU Size	66
Configuring NAT Filtering	66
Configuring Static Routes	66
Chapter 5 Fine-Tuning Your Network	69
Allowing Inbound Connections to Your Network	69
How Your Computer Accesses a Remote Computer through Your Router	70
How Port Triggering Changes the Communication Process	71
How Port Forwarding Changes the Communication Process	73
How Port Forwarding Differs from Port Triggering	74
Configuring Port Forwarding to Local Servers	74
Adding a Custom Service	75
Editing or Deleting a Port Forwarding Entry	76
Configuring Port Triggering	77
Using Universal Plug and Play	80
Optimizing Wireless Performance	82
Changing the MTU Size	83
Overview of Home and Small Office Networking Technologies	84
Assessing Your Speed Requirements	85
Chapter 6 Using Network Monitoring Tools	87
Viewing Wireless Router Status Information	88
Viewing a List of Attached Devices	93
Managing the Configuration File	93
Backing Up and Restoring the Configuration	94
Erasing the Configuration	94
Updating the Router Firmware	95
Checking for New Firmware in the Router Upgrade Screen	95
Updating Manually to New Router Firmware	96
Enabling Remote Management Access	98
Traffic Meter	100
Chapter 7 Troubleshooting	103
Quick Tips	103
Troubleshooting Basic Functions	104
Login Problems	107
Checking the Internet Service Connection	108
Obtaining an Internet IP Address	108
Troubleshooting PPPoE	109
Troubleshooting Internet Browsing	110
Troubleshooting Your Network Using the Ping Utility	110
Testing the LAN Path to Your Router	111
Testing the Path from Your Computer to a Remote Device	112
Problems with Date and Time	112
Problems with Wireless Adapter Connections	113
Restoring the Default Configuration and Password	114
Appendix A Technical Specifications	117
Default Configuration Settings	117
General Specifications	119
Appendix B Related Documents	121

Match case Limit results 1 per page

Wireless-N 150 Router WNR1000v2 User Manual

Fine-Tuning Your Network

5-13

v1.0, September 2009

Select

UPnP

under Advanced the main menu. The UPnP screen displays.

The available settings and information displayed in this screen are:

•

Turn UPnP On

. UPnP can be enabled or disabled for automatic device configuration. The

default setting for UPnP is disabled. If this check box is not selected, the router does not

allow any device to automatically control the resources, such as port forwarding

(mapping) of the router.

•

Advertisement Period

. The advertisement period is how often the router broadcasts its

UPnP information. This value can range from 1 to 1440 minutes. The default period is 30

minutes. Shorter durations ensure that control points have current device status at the

expense of additional network traffic. Longer durations might compromise the freshness

of the device status but can significantly reduce network traffic.

•

Advertisement Time To Live

. The time to live for the advertisement is measured in hops

(steps) for each UPnP packet sent. The time to live hop count is the number of steps a

broadcast packet is allowed to propagate for each UPnP advertisement before it

disappears. The number of hops can range from 1 to 255. The default value for the

advertisement time to live is 4 hops, which should be fine for most home networks. If you

notice that some devices are not being updated or reached correctly, then it might be

necessary to increase this value.

•

UPnP Portmap Table

. The UPnP Portmap Table displays the IP address of each UPnP

device that is currently accessing the router and which ports (Internal and External) that

device has opened. The UPnP Portmap Table also displays what type of port is open and

whether that port is still active for each IP address.

Click

Apply

to save your settings.

Figure 5-7