Netgear WNR2000-3XFNAS WNR2000v3 Installation Guide

Netgear WNR2000-3XFNAS Manual

Get Netgear WNR2000-3XFNAS PDF manuals and user guides View all Netgear WNR2000-3XFNAS manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear WNR2000-3XFNAS manual content summary:

  • Netgear WNR2000-3XFNAS | WNR2000v3 Installation Guide - Page 1
    N300 Wireless Router WNR2000v3 Installation Guide Package Contents: NETGEAR N300 Wireless Router Ethernet cable Power adapter Step 1: Unplug the power to turn off your modem. Internet DSL or Cable Step 2: Connect one end of the yellow Ethernet
  • Netgear WNR2000-3XFNAS | WNR2000v3 Installation Guide - Page 2
    browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. June 2011 Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to
  • 1
  • 2
Wait approximately 2 minutes
until your modem turns on.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.
Package Contents:
N300 Wireless Router
WNR2000v3
Installation Guide
Power adapter
Ethernet cable
Step 1:
Unplug the power
to turn off your modem.
Step 2:
Connect one end of the yellow
Ethernet cable (
) to your modem,
and the other end to the Internet port
on your router.
Plug in, then turn on your modem.
Step 3:
Step 6:
Step 4:
Connect the power adapter to the
router, then plug it into an outlet.
If none of the LEDs turn on, make sure that
the Power On/Off button is in the ON position
(pushed in).
Wait until the wireless LED turns
solid green.
Step 5:
Connect the router
to your computer.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
Optionally, connect wirelessly by using the
preset wireless security settings
located on the bottom label.
Open a browser.
If the Web page does not display,
close and re-open the browser
and enter
http://routerlogin.net
in
the address bar, or check the
“Troubleshooting” section on
the back of this installation guide.
NETGEAR
N300 Wireless Router
Modem
or Cable
Internet
DSL
N300 Wireless Router
(not included)