Netgear XAV1101 XAV1101 Install Guide

Netgear XAV1101 - Powerline Ethernet Adapter Manual

Get Netgear XAV1101 - Powerline Ethernet Adapter PDF manuals and user guides View all Netgear XAV1101 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear XAV1101 manual content summary:

  • Netgear XAV1101 | XAV1101 Install Guide - Page 1
    trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. December 2010 Installation Guide Powerline AV 200 Mini Adapter XAV1101 Package
  • Netgear XAV1101 | XAV1101 Install Guide - Page 2
    you can use our telephone support service. Registration via our website is strongly recommended. To access the XAV1101 utility, go to http://support.netgear.com/app/answers/detail/a_id/17427 Go to http://www.NETGEAR.com/support for product updates and Web support. For GNU General Public License
  • 1
  • 2
Installation Guide
This symbol was placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment
(the WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws
of your jurisdiction implementing the WEEE Directive.
©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo
are registered trademarks of NETGEAR, Inc. in the United States and/or other
countries. Other brand and product names are trademarks or registered
trademarks of their respective holders. Information is subject to change without
notice.
December 2010
LED and Button Descriptions
Item
Description
Power LED
•
Solid green
. The electrical power is on.
•
Blinking green
. The adapter is in power
saving mode or setting up security.
•
Off
. There is no electrical power.
Ethernet
LED
•
Solid
. The Ethernet port is linked, but there is
no activity.
•
Blinking
. There is traffic on the Ethernet port.
•
Off
. There is no Ethernet connection.
Powerline
LED
•
Solid
. The adapter is connected to a Powerline
network.
•
Blinking
. The adapter is sending or receiving
data.
•
Off
. The adapter has not found any other
compatible Powerline devices using the same
encryption key.
Powerline LED
Power LED
Ethernet LED
Reset
Security
Powerline AV 200 Mini
Adapter XAV1101
Troubleshooting Tips
Power LED is off
Make sure that power is supplied to the electrical outlet,
and that the Powerline devices are not plugged into an
extension cord, power strip, or surge protector.
Power LED is
blinking once
every 3 seconds
Power saving mode occurs when the Ethernet LED is off.
This can occur when:
•
The Ethernet cable is unplugged.
•
The device connected through the Ethernet cable is
turned off.
•
The adapter is idle for 10 minutes.
It returns to normal mode within 2 seconds once the
Ethernet link is up.
Powerline LED is
off
•
If you have set network security, make sure that all Power
line devices are using the same encryption key; see the
online
User Manual
for details.
•
Press the
Reset
button on each device for 1 second to
return the Powerline adapter to its factory default settings.
Powerline LED is
amber or red
Move the Powerline device to a closer location.
Ethernet LED is
not blinking
•
Make sure that the Ethernet cables are working and
securely plugged into the devices.
•
Press the
Reset
button on each device for 1 second to
return the Powerline adapter to its factory default settings.
Package Contents
Warning:
Do not press the
Security
button on the
Powerline adapter until installation is complete and the
adapters are communicating with each other (indicated by
the blinking Powerline LED). Pressing this button too soon
can temporarily disable Powerline communication. If this
should occur, use the
Factory Reset
button to return the
Powerline adapter to its factory default settings.
The
Pick A Plug
feature lets you pick the electrical
outlet with the strongest link rate, indicated by the
color displayed by the LED:
Green
:
Link rate
> 80 Mbps
(Best)
Amber
:
Link rate > 50
and < 80 Mbps
(Better)
Red
:
Link rate
< 50 Mbps
(Good)
Factory
Reset
Press the
Reset
button for 1 second, then release it
to return the Powerline adapter to its factory default
settings.
Security
Button
After you plug in your new AV adapter, press the
Security
button for 2 seconds, then press the secu-
rity button on one of the other AV adapters in your
existing network for 2 seconds. Both buttons must
be pressed within 2 minutes.
Note
: The
Security
button does not work in power
saving mode (see “Power LED is blinking once every
3 seconds” in the “Troubleshooting Tips” table
below).
Item
Description
Powerline
AV 200 Mini
Adapter
Ethernet Cable