Netgear XAV2101 XAV2101 Install Guide

Netgear XAV2101 - POWERLINE AV 200 NANO ADAPTER Manual

Get Netgear XAV2101 - POWERLINE AV 200 NANO ADAPTER PDF manuals and user guides View all Netgear XAV2101 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear XAV2101 manual content summary:

  • Netgear XAV2101 | XAV2101 Install Guide - Page 1
    . • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. Installation Guide Powerline AV 200 Nano Adapter XAV2101 Package Contents This symbol was
  • Netgear XAV2101 | XAV2101 Install Guide - Page 2
    Existing Powerline Network Room 1 Room 2 Add a Powerline Adapter Room 3 Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1004, XAV1501, XAV2001, XAV2501, and XAVN2001. For a complete list of AV certified devices, go to http://www.homeplug.org/
  • 1
  • 2
Installation Guide
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are
registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their
respective holders. Information is subject to change without notice.
December 2010
LED and Button Descriptions
Item
Description
Power LED
•
Solid green
. The electrical power is on.
•
Blinking green
. The adapter is restarting or
setting up security.
• Amber.
Power saving mode.
•
Off
. There is no electrical power.
Powerline
LED
•
Solid
. The adapter is connected to a Powerline
network.
•
Blinking
. The adapter is sending or receiving data.
•
Off
. The adapter has not found any other
compatible Powerline devices using the same
encryption key.
The
Pick A Plug
feature lets you pick the electrical out-
let with the strongest link rate, indicated by the color
displayed by the LED:
Green
: Link
rate > 80 Mbps
(Best)
Amber
: Link rate >
50 and < 80 Mbps
(Better)
Red
: Link
rate < 50
Mbps (Good)
Power LED
Powerline LED
Ethernet LED
Security
Reset
Powerline AV 200 Nano
Adapter XAV2101
Troubleshooting Tips
Power LED is off
Make sure that power is supplied to the electrical outlet,
and that the Powerline devices are not plugged into an
extension cord, power strip, or surge protector.
Power LED is
amber
Power saving mode occurs when the Ethernet LED is off.
This can occur when:
•
The Ethernet cable is unplugged.
•
The device connected through the Ethernet cable is
turned off.
•
The adapter is idle for 10 minutes.
It returns to normal mode within 2 seconds once the
Ethernet link is up.
Powerline LED is
off
•
If you have set network security, make sure that all Power
line devices are using the same encryption key; see the
online
User Manual
for details.
•
Press the Reset button on each device for 1 second to
return the Powerline adapter to its factory default settings.
Powerline LED is
amber or red
Move the Powerline device to a closer location.
Ethernet LED is
not blinking
•
Make sure that the Ethernet cables are working and
securely plugged into the devices.
•
Press the Reset button on each device for 1 second to
return the Powerline adapter to its factory default settings.
Package Contents
Powerline AV 200
Nano Adapter
Ethernet Cable
Warning:
Do not press the
Security
button on the
Powerline adapter until installation is complete and the
adapters are communicating with each other (indicated by
the blinking Powerline LED). Pressing this button too soon
can temporarily disable Powerline communication. If this
should occur, use the
Factory Reset
button to return the
Powerline adapter to its factory default settings.
Recording your Password
Before you install your XAV2101 adapter
into your
existing Powerline network, find its password, which is
shown on the back of the device, and record it here:
_______________________________
Ethernet
LED
•
Solid
. The Ethernet port is linked, but there is no
activity.
•
Blinking
. There is traffic on the Ethernet port.
•
Off
. There is no Ethernet connection.
Factory
Reset
Press the
Factory Reset
button for 1 second, then
release it to turn the Powerline adapter to its factory
default settings.
Security
Button
After you plug in your new AV adapter, press the secu-
rity button for 2 seconds, then press the security but-
ton on one of the other AV adapters in your existing
network for 2 seconds. Both buttons must be pressed
within 2 minutes.
Note
: The
Security
button does not work in power
saving mode (see “Power LED is amber” in the
“Troubleshooting Tips” table below).
Item
Description