Netgear XAVB5201 Installation Guide

Netgear XAVB5201 Manual

Netgear XAVB5201 manual content summary:

  • Netgear XAVB5201 | Installation Guide - Page 1
    up. Powerline LED is off • If you have set network security, make sure that all Power line devices are using the same encryption key; see the online User Manual for NETGEAR, Inc. All rights reserved. May 2012 Installation Guide Powerline 500 (2-pack) XAVB5201 Package Contents Powerline 500 Nano
  • Netgear XAVB5201 | Installation Guide - Page 2
    is required before you can use our telephone support service. Registration via our website is strongly recommended. To access the XAV5201 Powerline utility, go to http://support.netgear.com, enter your Powerline model number, and click the Powerline utility link. To register your product, get the
  • 1
  • 2

Installation Guide
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or
registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Information is subject to change without notice.Other brand and product names are
trademarks or registered trademarks of their respective holders. ©2012 by NETGEAR, Inc.
All rights reserved.
May 2012
LED and Button Descriptions
Item
Description
Power
LED
Solid green
. The electrical power is on.
Solid amber.
The adapter is in power saving
mode.
Blinking green
. The adapter is in the process of
setting up security.
Off
. There is no electrical power.
Power-
line LED
Solid
. The adapter is connected to a Powerline
network.
Off
. The adapter has not found any other
compatible Powerline devices using the same
encryption key.
The
Pick A Plug
feature lets you pick the electri-
cal outlet with the strongest link rate, indicated by
the color displayed by the LED:
Green
: Link
rate > 80
Mbps (Best)
Amber
: Link rate
> 50 and < 80
Mbps (Better)
Red
: Link
rate < 50
Mbps(Good)
Powerline LED
Power LED
Ethernet LED
Reset
Security
Ethernet port
Factory
button
Powerline 500 (2-pack)
XAVB5201
Troubleshooting Tips
Power LED is off
Make sure that power is supplied to the electrical
outlet, and that the Powerline devices are not plugged
into an extension cord, power strip, or surge protector.
Power LED is
amber
Power saving mode occurs when the Ethernet LED is
off. This can occur when:
The Ethernet cable is unplugged.
The device connected through the Ethernet cable is
turned off.
The adapter is idle for 10 minutes.
It returns to normal mode within 2 seconds once the
Ethernet link is up.
Powerline LED
is off
If you have set network security, make sure that all
Power line devices are using the same encryption
key; see the online
User Manual
for details.
Press the
Reset
button on each device for 1 second
to return the Powerline adapter to its factory default
settings.
Powerline LED
is amber or red
Move the Powerline device to a closer location.
Ethernet LED is
off
Make sure that the Ethernet cables are working and
securely plugged into the devices.
Press the
Reset
button on each device for 1 second
to return the Powerline adapter to its factory default
settings.
Package Contents
Warning:
Do not press the
Security
button on the Powerline
adapter until installation is complete and the adapters are
communicating with each other (indicated by the blinking
Powerline LED). Pressing this button too soon can temporarily
disable Powerline communication. If this should occur, use the
Factory Reset
button to return the Powerline adapter to its
factory default settings.
Ethernet
LED
Solid
. The Ethernet port is linked.
Off
. There is no Ethernet connection.
Security
button
After you plug in your new AV adapter, press the
Security
button for 2 seconds, then press the
security button on one of the other AV adapters in
your existing network for 2 seconds. Both buttons
must be pressed within 2 minutes.
Note
: The
Security
button does not work in power
saving mode (see “Power LED is amber” in the
Troubleshooting Tips table).
Factory
Reset
Press the
Reset
button for 1 second, then release
it to return the Powerline adapter to its factory
default settings.
Item
Description
Powerline 500
Nano Adapters
Ethernet cables
In some regions,
a Resource CD is
included with your
product.