Netgear XS512EM User Manual

Netgear XS512EM Manual

Get Netgear XS512EM PDF manuals and user guides View all Netgear XS512EM manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear XS512EM manual content summary:

  • Netgear XS512EM | User Manual - Page 1
    User Manual 12- or 24-Port 10-Gigabit/Multi-Gigabit Ethernet Smart Managed Plus Switch with 2 SFP+ Combo Ports Models • XS512EM • XS724EM December 2018 202-11841-04 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA
  • Netgear XS512EM | User Manual - Page 2
    Safety Instructions and Warnings on page 12. Changed Install the Switch in Your Network on page 17 and added Ethernet Cables and Speeds on page 17. Updated the number of supported LAGs for switch model XS724EM. Added Access the Switch From a Mac or Windows-Based Computer Using the NETGEAR Switch
  • Netgear XS512EM | User Manual - Page 3
    Connection 24 Set Up a Fixed IP Address for the Switch by Connecting Directly to the Switch Off-Network 25 Use the NETGEAR Insight Mobile App to Access the Switch.......27 Use the NETGEAR ProSAFE Plus Utility to Access the Switch.......28 Change the Switch Password 29 Register Your Product 30
  • Netgear XS512EM | User Manual - Page 4
    Power Saving Mode 67 Manually Download and Update the Firmware 68 Restart the Switch 69 Save the Switch Configuration 70 Restore a Saved Switch Configuration 70 Return the Switch to Its Factory Default Settings 71 Use the Factory Defaults Button to Reset the Switch 71 Use the Local Browser
  • Netgear XS512EM | User Manual - Page 5
    or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM View Switch Information or Change the Switch Device Name.....74 View or Clear the Port Statistics 74 Chapter 7 Diagnostics and Troubleshooting Test Cable Connections 77 Resolve a Subnet Conflict to Access the
  • Netgear XS512EM | User Manual - Page 6
    • Back Panel • SFP Slots for Fiber or Copper Connectivity • Switch Label • Safety Instructions and Warnings Note: For more information about the topics that are covered in this manual, visit the support website at netgear.com/support/. Note: Firmware updates with new features and bug fixes are made
  • Netgear XS512EM | User Manual - Page 7
    following related documentation is available at netgear.com/support/download/: • Installation guide • Data sheet • ProSAFE Plus Configuration Utility User Manual Switch Package Contents The switch package contains the following items: • Switch model XS512EM or model XS724EM • Power cord (localized
  • Netgear XS512EM | User Manual - Page 8
    E Description Power LED. Fan LED. Factory Defaults button (see Use the Factory Defaults Button to Reset the Switch on page 71). Ethernet port LED descriptions (printed on the front panel). Model XS512EM. Ten RJ-45 10-Gig/Multi-Gig Ethernet ports numbered 1 through 10 that support 10G, 5G, 2.5G, 1G
  • Netgear XS512EM | User Manual - Page 9
    For information about the supported transceiver modules, see switch. Solid green. Power is supplied to the switch and the switch is ready for operation. N/A (single LED only) Off. The fan is operating normally. Solid yellow. A fan failure occurred. Hardware Overview of the 9 Switch User Manual
  • Netgear XS512EM | User Manual - Page 10
    Switch Models XS512EM and XS724EM Table 2. LED descriptions (Continued) LED Left Right Description LED LED Ethernet port LEDs Model XS512EM is detected. SFP+ slot LEDs Model XS512EM: LEDs for ports 11F and 12F Model panel The back panel of the switch provides a Kensington lock slot for an
  • Netgear XS512EM | User Manual - Page 11
    and 12F, in which case you cannot use ports 11T and 12T. On model XS512EM, you can insert transceiver modules in slots 23F and 24F, in which case you cannot use ports 23T and 24T. These models support the NETGEAR SFP transceiver modules and direct-attach cables (DACs) that are listed in the
  • Netgear XS512EM | User Manual - Page 12
    Label The label on the bottom panel of the switch shows the serial number, MAC address, default login information, and other information for the switch. Figure 4. Switch label model XS512EM Figure 5. Switch label model XS724EM Safety Instructions and Warnings Use the following safety guidelines to
  • Netgear XS512EM | User Manual - Page 13
    Plus Switch Models XS512EM and NETGEAR product, which might not be covered by NETGEAR's warranty, to the extent permissible by applicable law. • Observe and follow service markings: - Do not service appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not
  • Netgear XS512EM | User Manual - Page 14
    Switch Models XS512EM and XS724EM • Operate the product only from the type of external power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your service adapter, contact your local NETGEAR reseller. - The power Switch User Manual
  • Netgear XS512EM | User Manual - Page 15
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM • To help protect your system from sudden, transient increases and decreases in electrical . • Always follow your local and national wiring rules. Hardware Overview of the 15 Switch User Manual
  • Netgear XS512EM | User Manual - Page 16
    and Access the Switch • Access the Switch and Discover the IP Address of the Switch • Set Up a Fixed IP Address for the Switch • Use the NETGEAR Insight Mobile App to Access the Switch • Use the NETGEAR ProSAFE Plus Utility to Access the Switch • Change the Switch Password • Register Your Product
  • Netgear XS512EM | User Manual - Page 17
    Smart Managed Plus Switch Models XS512EM and XS724EM Ethernet Cables and Speeds Before you set up the switch in your network, review the information in the following table, which describes the cables that you can use for the switch connections and the speeds that these cables can support, up to 100
  • Netgear XS512EM | User Manual - Page 18
    XS512EM or XS724EM switch (the latter F 1G computer model is shown in the previous figure) B Network router that support 10G G 2.5G gaming computer C Internet connection that support 10G H1 2.5G WiFi access point D1 and D2 Edge switches that support 10G (the H2 figure shows two NETGEAR
  • Netgear XS512EM | User Manual - Page 19
    Switch Models XS512EM and XS724EM To set up the switch in your network and power on the switch: switch can provide 10G speeds only if your Internet connection supports 10G. Depending on your setup, if your router, Internet modem, or both do support 10G speeds, connect one RJ-45 port on the switch
  • Netgear XS512EM | User Manual - Page 20
    in your network and perform basic configurations (see Use the NETGEAR ProSAFE Plus Utility to Access the Switch on page 28). Access the Switch and Discover the IP Address of the Switch By default, the switch receives an IP address from a DHCP server (or a router that functions as a DHCP server
  • Netgear XS512EM | User Manual - Page 21
    -Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 6. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. The page shows the IP address that is assigned to the switch. Tip: You can copy and paste
  • Netgear XS512EM | User Manual - Page 22
    -Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 7. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. The page shows the IP address that is assigned to the switch. Tip: You can copy and paste
  • Netgear XS512EM | User Manual - Page 23
    browser interface opens. 11. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. The page shows the IP address that is assigned to the switch. Tip: You can copy and paste the IP address into a new shortcut or bookmark
  • Netgear XS512EM | User Manual - Page 24
    web browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. From the DHCP Mode menu, select Disable. The
  • Netgear XS512EM | User Manual - Page 25
    of your computer. 3. Open a web browser from a computer that is connected to the switch directly through an Ethernet cable. 4. Enter 192.168.0.239 as the IP address of the switch. The login page displays. 5. Enter the switch password. Install and Access the Switch in 25 Your Network User Manual
  • Netgear XS512EM | User Manual - Page 26
    24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM The default password is password. The password is case-sensitive. The Switch Information page displays. 6. From the DHCP Mode menu, select Disable. The IP address fields become available. 7. Enter the fixed (static
  • Netgear XS512EM | User Manual - Page 27
    the switch and tap the Visit Web Interface link. The login page of the local browser interface opens. 8. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. Install and Access the Switch in 27 Your Network User Manual
  • Netgear XS512EM | User Manual - Page 28
    visiting netgear.com/support/product/PCU. You must use ProSAFE Plus Utility version 2.5.3 or a later version. 2. Temporarily disable the firewall, Internet security, antivirus programs, or all of these on the computer that you use to configure the switch. Note: Instead of disabling security services
  • Netgear XS512EM | User Manual - Page 29
    Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 7. Open Manual. You can access the user manual through links on the Help tab of the utility, or you can download it by visiting netgear.com/support/download/. Change the Switch Password The default password to access the switch is password
  • Netgear XS512EM | User Manual - Page 30
    3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select Help > Registration. The Product Registration page
  • Netgear XS512EM | User Manual - Page 31
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 7. Follow the onscreen process to register your product. Install and Access the Switch in 31 Your Network User Manual
  • Netgear XS512EM | User Manual - Page 32
    3 Use VLANS for Traffic Segmentation This chapter describes how you can use VLANs to segment traffic on the switch. The chapter contains the following sections: • VLAN Overview • Create Basic Port-Based VLANs • Assign Ports to Multiple Port-Based VLANs • Create 802.1Q-Based VLANs
  • Netgear XS512EM | User Manual - Page 33
    web browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. Use VLANS for Traffic 33 Segmentation User
  • Netgear XS512EM | User Manual - Page 34
    Switch Models XS512EM your switch supports. If all the VLANs share an uplink to for the uplink. Note: switch. In an advanced port-based VLAN configuration, you can assign a single port to multiple VLANs. By default switch. You can use a WiFi or wired network connection, or connect directly to a switch
  • Netgear XS512EM | User Manual - Page 35
    Switch Models XS512EM and XS724EM 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Use VLANS for Traffic 35 Segmentation User Manual
  • Netgear XS512EM | User Manual - Page 36
    web browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > 802.1Q. The Basic 802.1Q VLAN
  • Netgear XS512EM | User Manual - Page 37
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > 802.1Q > Advanced > VLAN Configuration
  • Netgear XS512EM | User Manual - Page 38
    Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 7. Click identifies the VLAN that must receive the data. By default, all ports are untagged. To add tagged or same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network
  • Netgear XS512EM | User Manual - Page 39
    Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. they were added. Use VLANS for Traffic 39 Segmentation User Manual
  • Netgear XS512EM | User Manual - Page 40
    Switch Models XS512EM and XS724EM Specify a Port PVID for an 802.1Q-Based VLAN A default port VLAN ID (PVID) is a VLAN ID tag that the switch IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch
  • Netgear XS512EM | User Manual - Page 41
    Smart Managed Plus Switch Models XS512EM and XS724EM Manage the Voice VLAN The switch supports a voice VLAN to facilitate voice over IP (VoIP) IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch
  • Netgear XS512EM | User Manual - Page 42
    browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > Voice VLAN > Port Settings. The
  • Netgear XS512EM | User Manual - Page 43
    Smart Managed Plus Switch Models XS512EM and XS724EM Manage the OUI Table The switch includes default Organizationally Unique IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Manual
  • Netgear XS512EM | User Manual - Page 44
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM • To change an existing OUI prefix in the table, do the following: a. Select the OUI. b. change both. c. Click the Apply button. Your settings are saved. Use VLANS for Traffic 44 Segmentation User Manual
  • Netgear XS512EM | User Manual - Page 45
    4 Optimize Performance With Quality of Service This chapter covers the following topics: • Enable 802.1p/DSCP-Based Quality of Service • Configure Port-Based Quality of Service • Set Up Rate Limiting • Set Up Broadcast Filtering 45
  • Netgear XS512EM | User Manual - Page 46
    Switch Models XS512EM and XS724EM Enable 802.1p/DSCP-Based Quality of Service IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select QoS. The Quality of Service
  • Netgear XS512EM | User Manual - Page 47
    Switch Models XS512EM and XS724EM Configure Port-Based Quality of Service You IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select QoS. The Quality of Service
  • Netgear XS512EM | User Manual - Page 48
    a web browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select QoS > Rate Limit. The Rate Control
  • Netgear XS512EM | User Manual - Page 49
    Switch Models XS512EM and XS724EM Set Up Broadcast Filtering You can configure the switch IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch By default, no limit is set. c.
  • Netgear XS512EM | User Manual - Page 50
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 9. To set a different rate for one or more other ports, repeat Step 8. Optimize Performance With 50 Quality of Service User Manual
  • Netgear XS512EM | User Manual - Page 51
    5 Manage Network Settings This chapter contains the following sections: • Specify IP Address Settings for the Switch • Manage Switch Discovery Protocols • Manage Multicast Traffic With IGMP Snooping • Set Up Link Aggregation 51
  • Netgear XS512EM | User Manual - Page 52
    a web browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. In the DHCP Mode menu, select Disable. The
  • Netgear XS512EM | User Manual - Page 53
    Mask, and Gateway Address fields are enabled. 6. Enter the IP address, subnet mask, and if available, the gateway address. 7. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 8. Click the APPLY button. Your settings
  • Netgear XS512EM | User Manual - Page 54
    Models XS512EM and XS724EM Bonjour, and NETGEAR Switch Discovery Protocol (NSDP), which are protocols that can discover the switch. A device that functions in the same network as the switch and that supports one of these protocols can discover the switch and obtain the IP address. As a security
  • Netgear XS512EM | User Manual - Page 55
    . This is the default setting. 7. Click the Apply button. Your settings are saved. Manage NETGEAR Switch Discovery Protocol A NETGEAR device or application that supports NETGEAR Switch Discovery Protocol (NSDP) can discover the switch in the network so that you can find the switch IP address and log
  • Netgear XS512EM | User Manual - Page 56
    In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Management > Discovery and Management. The
  • Netgear XS512EM | User Manual - Page 57
    In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Multicast. The IGMP Snooping Configuration
  • Netgear XS512EM | User Manual - Page 58
    In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Multicast. The IGMP Snooping Configuration
  • Netgear XS512EM | User Manual - Page 59
    Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you can enable snooping on any VLAN: • For port-based VLANs, you can enter a VLAN ID from 1 to the maximum number of ports that the switch supports. • For 802.1Q
  • Netgear XS512EM | User Manual - Page 60
    browser. 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > LAG > LAG Membership. The LAG
  • Netgear XS512EM | User Manual - Page 61
    Aggregation Control Protocol Group Switch model XS512EM can support eight LAGs, and switch model XS724EM can support twelve LAGs, with up IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Manual
  • Netgear XS512EM | User Manual - Page 62
    or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 10. To enable the LAG as an enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information
  • Netgear XS512EM | User Manual - Page 63
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > LAG > LACP Port Configuration. The
  • Netgear XS512EM | User Manual - Page 64
    the Power Saving Mode • Manually Download and Update the Firmware • Restart the Switch • Save the Switch Configuration • Restore a Saved Switch Configuration • Return the Switch to Its Factory Default Settings • Enable Port Mirroring • View Switch Information or Change the Switch Device Name • View
  • Netgear XS512EM | User Manual - Page 65
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Management > Port Status. The Port
  • Netgear XS512EM | User Manual - Page 66
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Management > Port Status. The Port
  • Netgear XS512EM | User Manual - Page 67
    Plus Switch Models XS512EM and XS724EM to process traffic. The loop status (that is, port blocking and LED blinking) is cleared if the switch IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch
  • Netgear XS512EM | User Manual - Page 68
    is the default setting. 7. Click the Apply button. Your settings are saved. Manually Download and Update the Firmware You can manually check for the latest firmware version for your switch by visiting netgear.com/support/download/. To manually download and update the firmware: 1. Visit netgear.com
  • Netgear XS512EM | User Manual - Page 69
    3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Device Restart. The Device
  • Netgear XS512EM | User Manual - Page 70
    In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Save Configuration. The Save
  • Netgear XS512EM | User Manual - Page 71
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Restore Configuration. The Restore
  • Netgear XS512EM | User Manual - Page 72
    browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Factory Default. The Factory Default page displays. 6. Select
  • Netgear XS512EM | User Manual - Page 73
    -Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM Enable Port Mirroring Port mirroring lets the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information
  • Netgear XS512EM | User Manual - Page 74
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. To navigate to this page, select System > Management
  • Netgear XS512EM | User Manual - Page 75
    . 3. In the address field of your web browser, enter the IP address of the switch. The login page displays. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Monitoring > Port Statistics. The Port
  • Netgear XS512EM | User Manual - Page 76
    7 Diagnostics and Troubleshooting This chapter contains the following sections: • Test Cable Connections • Resolve a Subnet Conflict to Access the Switch • Hardware Troubleshooting Chart 76
  • Netgear XS512EM | User Manual - Page 77
    might take up to a few minutes. Resolve a Subnet Conflict to Access the Switch If you power on the switch before you connect it to a network that includes a DHCP server, the switch uses its own default IP address of 192.168.0.239. This subnet might Diagnostics and 77 Troubleshooting User Manual
  • Netgear XS512EM | User Manual - Page 78
    to the switch. The switch powers on. The network DHCP server discovers the switch and assigns it an IP address that is in the correct subnet for the network. Hardware Troubleshooting Chart The following table lists symptoms, possible causes, and possible solutions for hardware problems that might
  • Netgear XS512EM | User Manual - Page 79
    12- or 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM Table 6. Troubleshooting chart (Continued) Symptom Possible Cause Possible Solution A segment or device networked device to any other networked device. Diagnostics and 79 Troubleshooting User Manual
  • Netgear XS512EM | User Manual - Page 80
    A Factory Default Settings and Technical Specifications This appendix includes the following sections: • Factory Default Settings • Basic Technical Specifications 80
  • Netgear XS512EM | User Manual - Page 81
    resets and returns to the factory settings that are shown in the following table. Table 7. Factory default settings Feature Switch password IP address Subnet mask DHCP mode UPnP Bonjour NSDP IGMP snooping LAGs VLANs Voice VLAN 802.1p/DSCP-based QoS Port-based QoS Rate limiting Broadcast
  • Netgear XS512EM | User Manual - Page 82
    /Multi-Gigabit Smart Managed Plus Switch Models XS512EM and XS724EM Basic Technical Specifications The following table shows the basic technical specifications of the switch. For more specifications, see the data sheet that you can download by visiting netgear.com/support/download/. Table 8. Basic
  • Netgear XS512EM | User Manual - Page 83
    Switch Models XS512EM and XS724EM Table 8. Basic technical specifications (Continued) Feature Description Maximum power consumption Model XS512EM: 76.56W Model XS724EM: 150.52W Dimensions (W x D x H) Model XS512EM mark Factory Default Settings and 83 Technical Specifications User Manual
  • Netgear XS512EM | User Manual - Page 84
    Switch Models XS512EM and XS724EM B Install the Switch in a Rack To install the switch in a rack, you need the rack-mount brackets and screws that are supplied with the switch. To install the switch brackets to the rack. Factory Default Settings and 84 Technical Specifications User Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
User Manual
12- or 24-Port 10-Gigabit/Multi-Gigabit
Ethernet Smart Managed Plus Switch
with 2 SFP+ Combo Ports
Models
•
XS512EM
•
XS724EM
NETGEAR, Inc.
350 E. Plumeria Drive
December 2018
San Jose, CA 95134, USA
202-11841-04