Nikon 4804 Instruction Manual
Nikon 4804 - SB R1 - Wireless Macro Flash System Manual
 |
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Nikon 4804 manual content summary:
- Nikon 4804 | Instruction Manual - Page 1
En Nikon Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 Instruction Manual - Nikon 4804 | Instruction Manual - Page 2
, or death and property damage. Disregarding instructions marked with this symbol could result CAUTION in property damage. WARNINGS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 1 If corrosive liquids seep from the batteries and get in your eyes, immediately - Nikon 4804 | Instruction Manual - Page 3
immediately consult with a doctor. 12 Use only the batteries specified in this instruction manual. Batteries other than those specified could leak corrosive liquids, explode or catch on fire or otherwise not perform satisfactorily. 13 Non-rechargeable batteries such as manganese, alkaline-manganese - Nikon 4804 | Instruction Manual - Page 4
For your safety CAUTIONS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 1 Do not touch the flash unit with wet hands, as this could cause an electric shock. 2 Keep the flash unit away from children to prevent them from putting the unit in or near their mouth, - Nikon 4804 | Instruction Manual - Page 5
, generate heat or catch on fire. 8 Be sure to use only batteries specified in this instruction manual, to avoid the possibility of batteries leaking corrosive liquids, generating heat or exploding. 9 Never open the casing surrounding batteries or use batteries whose casing has been breached as such - Nikon 4804 | Instruction Manual - Page 6
the Nikon Creative Lighting System (CLS), provides a variety of wireless multiple flash and close-up flash operations. The Speedlight system mainly consists of the Wireless Speedlight Commander SU-800, which controls flash output when mounted on CLS-compatible cameras; the Wireless Remote Speedlight - Nikon 4804 | Instruction Manual - Page 7
flash synchronization at your camera's highest shutter speed is now possible. This is useful when you want to use a wider aperture to ensure a shallow depth of field blurs the background (p. 96). See your CLS-compatible camera instruction manual for details on the Nikon Creative Lighting System - Nikon 4804 | Instruction Manual - Page 8
compatible with Nikon Creative Lighting System" are abbreviated as "CLS-compatible cameras." • In this manual, the Wireless Speedlight Commander SU-800 is called the "Commander SU-800" or "SU-800" and the Wireless Remote Speedlight SB-R200, the "Remote Speedlight SB-R200" or "SB-R200." Symbols used - Nikon 4804 | Instruction Manual - Page 9
icons 20 • Wireless multiple flash operation in the Nikon Creative Lighting System (CLS 26 Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1 (Used with Nikon CLS-compatible cameras 27 • Procedures for close-up flash operation 28 • Procedures for Commander flash operation 38 - Nikon 4804 | Instruction Manual - Page 10
shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 105 • Flash shooting with Speedlight Stand AS-20 107 Flash shooting using SLR cameras not compatible with CLS • Overview of close-up flash operation (using cords) ....... 110 • Procedures for close-up flash operation (using cords)... 112 - Nikon 4804 | Instruction Manual - Page 11
123 • Tips on Speedlight care 124 • Notes on batteries 125 • Troubleshooting 126 • Specifications 130 • Index 132 Preparation Flash operation using the R1C1 Flash operation using the R1 Functions and use of the SU-800 Functions and use of the SB-R200 Details on close-up flash operation and - Nikon 4804 | Instruction Manual - Page 12
Have Nikon regularly spot-check your Speedlight Nikon recommends that you have your Speedlight serviced by an authorized dealer or service center at least once every two years. Using your Speedlight correctly The Nikon Speedlight's performance has been optimized for use with Nikon brand cameras and - Nikon 4804 | Instruction Manual - Page 13
and lenses Recommended cameras Cameras compatible with Nikon Creative Lighting System (CLS) A variety of wireless multiple flash and close-up flash operations using the SU-800 and the SB-R200 are available with Nikon CLS-compatible cameras. • Refer to your camera instruction manual for details on - Nikon 4804 | Instruction Manual - Page 14
AF operation may not autofocus correctly, or may lead to damage of the lens or camera's autofocus mechanism due to the weight of the flash head. Therefore, do not perform autofocus operation, but use manual focus instead. Using an AF Micro-Nikkor 60mm f/2.8D lens • Be sure to attach the Dedicated - Nikon 4804 | Instruction Manual - Page 15
manual. Users of the Nikon Close-up Speedlight Remote Kit R1, Commander SU-800 and Remote Speedlight SB-R200 should read the sections necessary for each kit. Products Available flash Usable cameras operations Nikon Close- Close-up up Speedlight Commander Kit R1C1 Commander CLS-compatible - Nikon 4804 | Instruction Manual - Page 16
Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 WCIOREMLMEASNSDSEPREESDUL-I8G0H0T Wireless Speedlight Commander SU-800 Soft Case SS-SU800 for SU-800 Attachment Ring SX-1 34 2 1 C B A ON/OFF WISRPEELEEDSLSIGRHETMOTSEB-R200 IR Panel for Built-in Flash SG-3IR - Nikon 4804 | Instruction Manual - Page 17
for Built-in Flash SG-3IR Flexible Arm Clip SW-C1 Diffuser SW-12 Close-up Speedlight Kit Case SS-MS1 Soft Case SS-SU800 for SU-800 Soft Case SS-R200 for SB-R200 Soft Case SS-SX1 for SX-1 Nikon Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 Commander SU-800 Remote - Nikon 4804 | Instruction Manual - Page 18
Terminal Connects the SU-800 with the SB-R200 when used with cameras not compatible with CLS. (p. 110) 7 Mounting Foot (p. 29) 8 Hot-shoe Contacts 9 Mount Pin 10 Battery Chamber lid (p. 28) 11 AF-assist Illuminator 12 Commander Transmit Window 13 Commander/Close-up Select Switch Toggles between the - Nikon 4804 | Instruction Manual - Page 19
firing or a malfunction when carrying the SU-800 in your camera bag, turn off the flash unit. 15 [SEL](FUNC.) button • Press to select the (selected by the Commander/Close-up select switch) to their default values. The LCD panel will blink 3 times. Using the SU-800 in low light Press any button on - Nikon 4804 | Instruction Manual - Page 20
the TTL mode. @ CLS-compatible camera The SU-800 is connected to cameras compatible with CLS. # Manual Flash The flash always fires at a specified output in combination with the aperture and light output level (guide number). $ Manual Flash Output Level Represents flash output level for each group - Nikon 4804 | Instruction Manual - Page 21
the SU-800 to the remote flash units such as the SB-R200. 2 Commander Mode Commander function is activated. 3 Low Battery-power Replace the battery. 4 Channel Represents the communication channel number through which the Commander and Speedlight exchange data. 5 CLS-compatible camera The SU-800 is - Nikon 4804 | Instruction Manual - Page 22
Speedlight parts, their functions, and accessories 8 Using Cords The SU-800 is connected to the SB-R200 using cords when mounted on cameras not compatible with CLS. This indicator blinks if the SB-R200 is not correctly connected. 9 Flash Output Level Compensation Value (Groups A, B) Indicates the - Nikon 4804 | Instruction Manual - Page 23
carrying the SB-R200 in your camera bag, turn off the flash unit. 9 TTL cord terminal Connects the SU-800 to the SB-R200 via a cord when used with cameras that are not compatible with CLS (p. 110). 10 Terminal cover Close the cover when not using the TTL cord. 11 Ready-light The lamp lights up in - Nikon 4804 | Instruction Manual - Page 24
The SG-3IR can be attached to a camera's hot shoe when a Nikon digital camera's built-in flash (such as D70-Series) is used as a Commander (p. 50). Extreme Close-Up Positioning Adapter SW-11 The SW-11 can be attached to the SB-R200 and used to curve flash light toward the optical axis to create - Nikon 4804 | Instruction Manual - Page 25
-R200 SB-R200 AS-20 SZ-1 Close-up Speedlight Kit Case SS-MS1 SJ-R200 SS-MS1 WIRELESS SPEEDLIGHT COMMANDER SU-800 SWIPREEELDELISSGHRTEMSOB-TER200 The SC-30 is optional. AS-20 SW-12 Caring for the Close-up Speedlight Kit Case SS-MS1 • Do not clean the case with a moistened cloth. Never use - Nikon 4804 | Instruction Manual - Page 26
Nikon Creative Lighting System (CLS) When the SU-800 is used with Nikon CLS-compatible cameras, the remote flash units can be divided into a maximum of 3 groups, and the flash output level can be separately set for each group of Master/Commander and remote flash unit(s), providing wireless multiple - Nikon 4804 | Instruction Manual - Page 27
Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1 (Used with Nikon CLS-compatible cameras) This section describes the necessary procedures for wireless close-up and Commander flash operations with a CLScompatible camera when using the Nikon Close-up Speedlight Commander Kit R1C1 - Nikon 4804 | Instruction Manual - Page 28
back into place. Use CR123A (3V) lithium batteries. Confirming the close-up mode setting Make sure that the Commander/Close-up select switch in the battery chamber is set to "Close-up" position. Replacing the battery The Low Battery-power Indicator blinks when the SU-800's ready-light does not come - Nikon 4804 | Instruction Manual - Page 29
Flash operation using the R1C1 2 Attaching the SU-800 to the camera. 1 Ensure the SU-800 and camera body are turned off. ON/OFF SEL READY LOCK 2 Rotate the Mounting Foot-lock lever to the left, slide the SU-800's Mounting Foot into the camera's accessory shoe and turn the lock lever to the - Nikon 4804 | Instruction Manual - Page 30
2 Install the battery, then close the battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When the SB-R200's battery power is weak, the green ready-light blinks after the power is turned on or after the flash has fired - Nikon 4804 | Instruction Manual - Page 31
Flash operation using the R1C1 4 Attaching the SB-R200 to the front of the lens. 1 Attach one of it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands to press the two Mounting Buttons on both sides - Nikon 4804 | Instruction Manual - Page 32
Procedures for close-up flash operation 5 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at click stops every 15°. Using the SB-R200 off-lens Use the provided Speedlight Stand AS-20 to - Nikon 4804 | Instruction Manual - Page 33
on. The ready-light on the SB-R200 lights up in green when the power is on, then turns red when the SB-R200 is fully recycled. SPWEIERDELLIEGSHST R S ON/OFF 2 Check the indicators on the SU-800's LCD panel. Confirm that Wireless flash, Close-up mode and CLS-compatible camera indicators are all - Nikon 4804 | Instruction Manual - Page 34
for close-up flash operation 6 Setting the flash mode on the SU-800. MODE NO AF-ILL A SE READY 1 Press the [MODE] button on the SU-800 to set the flash mode to TTL. Use of TTL mode is recommended for normal flash shooting. AB ON/OFF 2 Confirm the flash settings of the SB-R200. Ensure - Nikon 4804 | Instruction Manual - Page 35
Flash operation using the R1C1 7 Setting a channel number on the SU-800 and SB-R200. CHANNEL 34 2 1 1 Set a channel number on the SU-800. Press the [SEL](FUNC.) button to display channel number (blinking). Press the [] or [] button to change - Nikon 4804 | Instruction Manual - Page 36
Procedures for close-up flash operation 8 Setting a group on the SB-R200. GROUP C B A CHANNEL 34 1 Set a group on each SB-R200. Rotate the [GROUP] select dial on each flash unit to set the group to A or B. Once set, the SB-R200 will operate according to the controls for each group as set on the - Nikon 4804 | Instruction Manual - Page 37
Flash operation using the R1C1 9 Compose a picture and shoot with flash. E AB ON L SEL READY LOCK 1 Compose the picture and shoot. Confirm that the red ready-lights on the SU-800 and SB-R200 are on then release O the shutter. • For details on test firing, refer to page 88. If the - Nikon 4804 | Instruction Manual - Page 38
(p. 28) Battery chamber 2 Set the Commander/Close-up select switch on the SU-800 to Commander function. Use the Commander/Close-up select switch to change the close-up function to Commander function or vice versa. Display in Commander flash operation 3 Attach the SU-800 to the camera in the same - Nikon 4804 | Instruction Manual - Page 39
light. Group A 3m (9.8ft.) With the SU-800 • Be sure to place all SB-R200 units that are set in the same group close together. • The set up range of the SB-R200 units vary depending on the Commander unit (camera, Speedlight, etc.) For details, see your Speedlight or camera's instruction manual - Nikon 4804 | Instruction Manual - Page 40
Procedures for Commander flash operation 4 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts down to 60° and up to 45°. The flash head can be set at click stops every 15°. Attaching the SB-R200 to the front of the lens The SB-R200 can be attached to the front of the lens through - Nikon 4804 | Instruction Manual - Page 41
3 Turning on the camera, the SU-800 and SB-R200. MODE AB ON/OFF SEL READY LOCK 1 Press the [ON/OFF] buttons to turn on the camera, the SU-800 and SB-R200. Ensure that the red ready-lights on the SU-800 and SB-R200 come on. SPWEIERDELLIEGSHST R S ON/OFF Flash operation using the R1C1 41 - Nikon 4804 | Instruction Manual - Page 42
Procedures for Commander flash operation 4 MODE NO AF-ILL Set the remote flash unit's flash mode on the SU-800. AB ON/OFF SEL READY LOCK 1 Press the [SEL](FUNC.) button to display the flash mode (blinking) of each group, then press [MODE] button to set the flash mode to TTL. Use of TTL mode - Nikon 4804 | Instruction Manual - Page 43
Flash operation using the R1C1 5 Setting a channel number and a group on the SU-800 and SB-R200. 1 Set a channel number and a group on the SU-800 and SB-R200 in the same way as No. 7 and 8 in "Procedures for close-up flash operation." (pp. 35, 36) 43 - Nikon 4804 | Instruction Manual - Page 44
Procedures for Commander flash operation 6 Compose a picture and shoot with flash. E AB ON L SEL READY LOCK 1 Compose the picture and shoot. Ensure that the red ready-lights on the SU-800 and SB-R200 are on, then release O the shutter. • For details on test firing, refer to page 88. - Nikon 4804 | Instruction Manual - Page 45
procedures for wireless close-up flash operation with CLS-compatible cameras that feature a Commander function and the Nikon Close-up Speedlight Remote Kit R1. • For details on close-up flash operation, see page 65. 1 Installing batteries in the SB-R200. 2 Attaching the SB-R200 to the front - Nikon 4804 | Instruction Manual - Page 46
ON/OFF 2 Install the battery, then close the battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When battery power is weak, the SB-R200's green ready-light blinks when the power is turned on or after the flash has fired - Nikon 4804 | Instruction Manual - Page 47
Flash operation using the R1 2 Attaching the SB-R200 to the front of the lens. 1 Attach one of it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands to press the two Mounting Buttons on both sides - Nikon 4804 | Instruction Manual - Page 48
Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at a click stop every 15°. Using the SB-R200 off-lens Use the provided AS-20 Speedlight Stand to set up the SB-R200 at any location (p. 107 - Nikon 4804 | Instruction Manual - Page 49
3 Turning on the camera and SB-R200. SPWEIERDELLIEGSHST R S ON/OFF 1 Press the [ON/OFF] buttons to turn on the camera and SB-R200. Ensure that the red ready-lights on the camera and SB-R200 come on. Flash operation using the R1 49 - Nikon 4804 | Instruction Manual - Page 50
Flash operation using the R1 4 Setting the Commander function on the camera. 1 Set the Commander function on the camera and flash mode on the SB-R200. • Be sure to read the instruction manual of the camera in use. Setting the D70-Series digital camera's Commander mode With a D70-Series camera, go - Nikon 4804 | Instruction Manual - Page 51
the SB-R200 to 3 when using a Nikon D70-Series digital camera, otherwise the flash will not fire. GROUP C B A CHANNEL 34 2 Rotate the [GROUP] select dial on the SB-R200 to set the group. • Set the group of the SB-R200 to Group A when using a Nikon D70-Series camera, otherwise the flash unit will - Nikon 4804 | Instruction Manual - Page 52
Flash operation using the R1 6 Compose a picture and shoot with flash. SPWEIERDELLIEGSHST RSE ON/OFF 1 Compose the picture and shoot. Ensure that the red ready-light on the SB-R200 is on, then release the shutter. • For details on test firing, refer to page 88. If the red ready-light blinks - Nikon 4804 | Instruction Manual - Page 53
Functions and use of the SU-800 This section describes the functions and use of the SU-800. 1 SU-800's available flash operations 2 Using the SU-800 3 Functions of the SU-800 53 - Nikon 4804 | Instruction Manual - Page 54
the corresponding pages for details on each flash operation. Available flash operation Usable cameras Usable Speedlights Close-up (p. 65) CLS-compatible cameras SB-R200 Cameras not compatible with CLS*1 Commander (p. 79) CLS-compatible cameras SB-R200 or SB-800*2, SB-600*2 *1 The optional - Nikon 4804 | Instruction Manual - Page 55
it into place. Use CR123A (3V) lithium batteries. Replacing the battery The low battery-power indicator blinks when the SU-800's ready-light does not come on within about 30 seconds of the power being turned on or after the flash has fired. • Replace the battery. 3 Turn off the camera and SU-800 - Nikon 4804 | Instruction Manual - Page 56
OFF SEL READY LOCK Unlock 5 Press the [ON/OFF] buttons on the camera and SU-800 to turn on the power. • Ensure that the ready-light on the SU-800 comes on. 6 Confirm the SU-800's LCD panel. Ensure that Wireless flash, Close-up mode and CLS-compatible camera indicators are correctly displayed. 56 - Nikon 4804 | Instruction Manual - Page 57
a camera body that is compatible with TTL auto flash, the SU-800 goes into standby mode when the camera's exposure meter turns off. Without a camera body, if the SU-800 is not being used for approx. 40 seconds, the standby function activates and automatically turns the SU-800 off to conserve battery - Nikon 4804 | Instruction Manual - Page 58
close-up and Commander functions Use the Commander/Close-up select switch to toggle between close-up and Commander functions. Battery chamber Display in close-up mode Display in Commander mode Settings in each flash mode In close-up mode (p. 65) • Flash mode (TTL, M) • Group name (A, B, C) • Flash - Nikon 4804 | Instruction Manual - Page 59
Functions and use of the SB-R200 This section describes the functions and use of the SB-R200. 1 SB-R200's available flash operations 2 Using the SB-R200 3 Functions of the SB-R200 59 - Nikon 4804 | Instruction Manual - Page 60
the SB-R200. Refer to the corresponding pages for details on each flash operation. Available flash operation Usable cameras and Speedlights Close-up (p. 65) CLS-compatible cameras Cameras not compatible with CLS*1, SU-800 Commander (p. 79) CLS-compatible cameras featuring Commander function or - Nikon 4804 | Instruction Manual - Page 61
the battery, then close the battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When the SB-R200's battery power is weak, the green ready-light blinks after the power has been turned on or after the flash has fired - Nikon 4804 | Instruction Manual - Page 62
unit The setup range of the SB-R200 units varies depending on cameras featuring Commander function or Speedlight SB-800. For details, see your Speedlight or camera's instruction manual. • Be sure to place all SB-R200 units that are set in the same group close together. • For notes on setting up the - Nikon 4804 | Instruction Manual - Page 63
SPWEIERDELLIEGSHST R S ON/OFF 6 Press the [ON/OFF] button on the camera, or the SB-800, SU-800 and SB-R200 to turn on the power. Ensure that the red ready-light on the camera, the SB-800, SU-800 or on the SB-R200 comes on. Functions and use of the SB-R200 63 - Nikon 4804 | Instruction Manual - Page 64
WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF 3 Functions of the SB-R200 The following functions can be set on the SB-R200. Switching the Target Light (focus assist lamp) on or off Use the Target Light button to illuminate or cancel the Target Light (p. 90). Items to be set • Group name (A, B, C) • - Nikon 4804 | Instruction Manual - Page 65
CLS-compatible cameras) This section describes in detail wireless close-up flash operation and shooting procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that provides example photos. Be sure to read your camera instruction manual for - Nikon 4804 | Instruction Manual - Page 66
SB-R200 are used with CLS-compatible cameras. The SB-R200 can be attached to the front of the lens, held in your hand, or freely positioned by using the Speedlight Stand AS-20. The flexibility of close-up flash operation sets it apart from conventional lighting systems. Example A A-1 Flash setup - Nikon 4804 | Instruction Manual - Page 67
to be revealed. • Group B: SB-R200 (TTL) E-4 example in "Close-up Speedlight Photography Examples" was taken under the same conditions as with E-3. F-4 F-5 Details on close-up flash operation and shooting procedures Single-light close-up flash operation Comparison of lighting effects due to - Nikon 4804 | Instruction Manual - Page 68
-light" and "triple-light" close-up flash operations. Display in dual-light close-up flash operation. Display in triple-light close-up flash operation. Methods for setting up Set up the SU-800 and SB-R200 in the same way as "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1 - Nikon 4804 | Instruction Manual - Page 69
button on the SU-800, the available flash mode changes. • The available flash modes vary, depending on cameras and lenses in use. • The same flash mode is set for both Groups A and B. • In triple-light close-up flash operation, the TTL and M (manual) flash modes are available for Groups A and B. For - Nikon 4804 | Instruction Manual - Page 70
3 Procedures for close-up flash operation Procedures for dual-light close-up flash operation 1 Press the [ON/OFF] buttons to turn on the camera, SU-800 and SB-R200. • Ensure that the red ready-lights on the SU-800 and SB-R200 are on. • Confirm that Wireless flash, close-up mode and CLScompatible - Nikon 4804 | Instruction Manual - Page 71
Setting the SB-R200's flash output level compensation value (in TTL mode). Press the [SEL](FUNC.) button to display the flash output level compensation value format, like 0.3 for 1/3, and 0.7 for 2/3. • Continuously pressing the [] or [] button quickly increases or decreases the value. • The flash - Nikon 4804 | Instruction Manual - Page 72
the [GROUP] select dial on the SB-R200 to set the group. Once set, the SB-R200 operates according to the controls as set on the SU-800. 10 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter. • For - Nikon 4804 | Instruction Manual - Page 73
light on the SB-R200 blinks for approx. 3 sec. (The ready-lights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, set a higher ISO sensitivity or use a wider aperture and reshoot. In the M (manual) mode, set the manual flash quickly. • Manual flash output level blinks - Nikon 4804 | Instruction Manual - Page 74
3 Procedures for close-up flash operation Procedures for triple-light close-up flash operation 1 Press the [ON/OFF] buttons to turn on the camera, the SU-800 and SB-R200. • Ensure that the red ready-lights on the SU-800 and SB-R200 are on. • Confirm that Wireless flash, Close-up mode and - Nikon 4804 | Instruction Manual - Page 75
Setting the SB-R200's flash output level compensation value (in TTL mode). Press the [SEL](FUNC.) button to display the flash output level compensation value format, like 0.3 for 1/3, and 0.7 for 2/3. • Continuously pressing the [] or [] button quickly increases or decreases the value. • The flash - Nikon 4804 | Instruction Manual - Page 76
close-up flash operation CHANNEL 34 2 1 7 Setting the manual flash output level for group C. Press the [SEL](FUNC.) button to display manual flash SU-800. Set the communication channel numbers of the SU-800 and SB-R200. Press the [SEL](FUNC.) button to display the channel number (blinking). Press - Nikon 4804 | Instruction Manual - Page 77
occurred, the red ready-light on the SB-R200 blinks for approx. 3 sec. (The ready-lights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, set a higher ISO sensitivity or use a wider aperture and reshoot. Details on close-up flash operation and shooting procedures 77 - Nikon 4804 | Instruction Manual - Page 78
78 - Nikon 4804 | Instruction Manual - Page 79
the details of available wireless Commander flash operation and necessary procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that contains example photos. Be sure to refer to your camera instruction manual for specific information on - Nikon 4804 | Instruction Manual - Page 80
ED • Group A: SB-800 (TTL) • Group B: SB-R200 (TTL) • Group C: SB-R200 (M) D-2 example in "Close-up Speedlight Photography Examples" was taken using a single built-in flash. Flash setup SB-R200 Group C SU-800 SB-R200 Group B Triple-light flash operation Two SB-R200 units on the right and left are - Nikon 4804 | Instruction Manual - Page 81
of lighting and shadow effects. Example G G-1 • Camera: D70 • Lens: AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED • Group A: SB-R200 (TTL) F-2 example in "Close-up Speedlight Photography Examples" was taken under the same conditions as with F-1. F-3 was taken using a single built-in flash. Flash - Nikon 4804 | Instruction Manual - Page 82
• Group B: SB-R200 (TTL) J-3 and J-4 examples in "Close-up Speedlight Photography Examples" was taken under the same conditions as with J-1. J-2 was taken using a single flash unit. Commander and remote flash units Commander flash operation is possible when CLS-compatible cameras are used with the - Nikon 4804 | Instruction Manual - Page 83
Set up the Commander and remote flash units in the same way as in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 38). Items to be set The following items can be set in Commander flash operation. • Flash mode of remote flash units (TTL, AA, M, --- (flash canceled), RPT - Nikon 4804 | Instruction Manual - Page 84
camera, the Commander and remote flash units. • Ensure that the red ready-lights come on and the flash units have been fully recycled. • Ensure that Wireless flash, Commander mode and CLS-compatible camera automatically. • The values are displayed in decimal format, like 0.3 for 1/3, and 0.7 for 2/3. - Nikon 4804 | Instruction Manual - Page 85
unit(s) to group A when using a Nikon D70-Series camera, otherwise the flash unit(s) will not fire. • With the SB-R200, rotate the [GROUP] select dial to set the group name. • With the SB-800 or SB-600, read the instruction manual for each model. Details on Commander flash operation and shooting - Nikon 4804 | Instruction Manual - Page 86
is used as a remote flash unit, the red ready-light on the SB-800 or SB-600 blinks for 3 sec. after firing. The amount of underexposure is displayed. (For more details, read your Speedlight instruction manual.) In the M (manual) mode, set manual flash output level. • Manual flash output level - Nikon 4804 | Instruction Manual - Page 87
and SB-R200. Be sure to refer to your camera instruction manual for specific information on camera settings and functions. 1 Test firing to confirm exposure 2 Checking illumination before taking pictures (Modeling Illumination) 3 Using the Target Light (Focus-Assist Illuminator) 4 Autofocus flash - Nikon 4804 | Instruction Manual - Page 88
unit in Group B in two seconds at an M1/64 flash output level. • Flash unit(s) in Group A or B of which flash firing is set to "canceled" also fire. In triple-light close-up flash operation When the [Test] button on the SU-800 is pressed, the SB-R200 in Group A fires in one second, followed by the - Nikon 4804 | Instruction Manual - Page 89
on a camera compatible with modeling illumination is pressed, the Modeling Illuminator of the SB-R200 also fires for approx. one second. • If the Target light is on, the Target light goes off. • The SB-R200 in a group of which flash firing is set to "canceled" does not fire. In the Commander mode - Nikon 4804 | Instruction Manual - Page 90
on the SB-R200 Pressing the Target Light button on the SB-R200 Turning on the camera's FV Lock WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF WISRPEELEEDSL Illuminating and canceling the Target Light using the Target Light button on the SB-R200 When the Target Light button on the SB-R200 is pressed while - Nikon 4804 | Instruction Manual - Page 91
work in close-up flash operation. • The SU-800's AF-Assist Illuminator supports CLS-compatible cameras' Multi-Area Autofocus system. The effective shooting distance with the AF-Assist Illuminator: Approx. 1m to 10m (3.3 to 33 ft.) with a 50mm f/1.8 lens or less, depending on the lens in use. Usable - Nikon 4804 | Instruction Manual - Page 92
with an exposure compensation function, you can compensate the flash output level on either the camera or the SB-800 or SU-800 flash unit. (For details, see your camera's instruction manual.) If you use both controls, the exposure is modified by the sum total of both compensation values. • In this - Nikon 4804 | Instruction Manual - Page 93
. When using cameras compatible with CLS, the SU-800 controls the flash output of the remote flash units (such as the SB-800), which are divided into three groups (A, B, and C), independently for each group. • Be sure to read the instruction manual of the Speedlight in use. Usable Speedlight SB-800 - Nikon 4804 | Instruction Manual - Page 94
and C. Setting a group and a channel number on the Speedlight Display when using the SB-800 Set the same channel number as set on the SU-800. • Refer to your Speedlight instruction manual for specific information on settings. Setting the flash mode on each group Firing Firing canceled Press the [SEL - Nikon 4804 | Instruction Manual - Page 95
or the number of flashes per second decreases because the Speedlight fires during a single exposure. • The maximum number of repeating flashes per frame varies depending on the frequency and flash output level. For more details, refer to your Speedlight instruction manual. 95 Other functions - Nikon 4804 | Instruction Manual - Page 96
camera's sync shutter speed. This is useful when you want to use a wider aperture to achieve shallow depth of field to blur the background. • Available flash modes are i-TTL, Auto Aperture flash, and Manual flash. Usable flash shooting distance ranges in Auto FP High-Speed Sync using the SB-R200 - Nikon 4804 | Instruction Manual - Page 97
may be extremely low when the manual flash output level is set to a low value. However, this is not a malfunction. Flash output level may also vary depending on the subject matter conditions. Guide number in Auto FP High-Speed Sync using the SB-R200 (m/ft) Flash output level M1/1 M1/2 M1/4 M1 - Nikon 4804 | Instruction Manual - Page 98
Lock function on the SU-800 or SB-R200 directly. Set it on the camera. Flash Value, or "FV," is the amount of flash exposure for the subject. Using FV Lock with compatible cameras, you can lock in the appropriate flash exposure for the main subject. This flash exposure remains locked in, even if you - Nikon 4804 | Instruction Manual - Page 99
camera instruction manual for specific information on camera settings and functions. 1 Flash shooting with colored gel filters 2 Flash shooting with the Extreme Close-Up Positioning Adapter SW-11 3 Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 4 Flash shooting with Speedlight - Nikon 4804 | Instruction Manual - Page 100
600 • Camera: D70 • Lens: AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED • Group A: SB-800 (TTL) • Group B: SB-600 (TTL) • Group C: SB-R200 (M) I-3 example in "Close-up Speedlight Photography Examples" was taken in dual-light flash operation with two different colored gel filters. I-2 was taken using - Nikon 4804 | Instruction Manual - Page 101
set the white balance on the Speedlight. Choose an appropriate white balance setting on your digital camera. For more details, see your camera instruction manual. Using colored filters for adding special colors to a scene. Colored gel filters can be used to add specific colors to create various - Nikon 4804 | Instruction Manual - Page 102
setting on your digital camera, then shoot. • For details on test firing, refer to page 88. Using colored gel filters Purpose Gel filter Balances the color of light from the flash to match that of fluorescent light FL-G1 Balances the color of light from the flash to match that of incandescent - Nikon 4804 | Instruction Manual - Page 103
the flash light is curved toward the optical axis, extremely vivid color images can be created while sufficient background illumination is guaranteed. • Camera: D70 • Lens: AF Micro-Nikkor 60mm f/2.8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) G-5 example in "Close-up Speedlight Photography - Nikon 4804 | Instruction Manual - Page 104
Adapter SW-11 3 Tilt the SB-R200's flash head down 60° toward the optical axis. 0˚ 60˚ Using the Extreme Close-Up Positioning Adapter SW-11 effectively Use the SW-11 when taking flash pictures at close distance for more effective results. Be sure to tilt the flash head by 60° toward the optical - Nikon 4804 | Instruction Manual - Page 105
C-4 example in "Close-up Speedlight Photography Examples" was taken under the same conditions as was C-1. C-2 and C-5 were taken without using the Diffuser SW-12. C-3 was taken using a single built-in flash. Flash setup Group B SB-R200 SU-800 SW-12 Dual-light flash shooting (with Diffuser SW-12 - Nikon 4804 | Instruction Manual - Page 106
Flash shooting with the Diffuser the stopper closes and slides into the SX-1, then release. • Ensure that the SW-C1's groove engages with the SX-1's groove. 4 Grip the Diffuser SW- 12 with the Flexible Arm Clip SW-C1. • As shown in the diagrams below, you can use the SW-C1 in - Nikon 4804 | Instruction Manual - Page 107
the glasses. Group B SB-R200 AS-20 • Camera: D70 • Lens: AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) H-4 example in "Close-up Speedlight Photography Examples" was taken using a single built-in flash. Attachment of the SB-R200 to the AS-20 1 Slide - Nikon 4804 | Instruction Manual - Page 108
Commander unit (such as a camera or Speedlight) in use. Refer to the instruction manual of each product. • Be sure to place all SB-R200 units that are set in the same group close together. • Take care not to let light from the SB-R200 enter the camera lens directly or indirectly in TTL auto flash - Nikon 4804 | Instruction Manual - Page 109
Flash shooting using SLR cameras not compatible with CLS Use the TTL Cord SC-30 (optional) to connect the SU-800 to the SB-R200 with SLR cameras not compatible with CLS. 1 Overview of close-up flash operation (using cords) 2 Procedures for close-up flash operation (using cords) 109 - Nikon 4804 | Instruction Manual - Page 110
. Set up the SU-800 and SB-R200 in the same way as described in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). • The same set-up is applicable when using the Speedlight Stand AS-20. 2 Connect the flash units using cords. Use the optional TTL Cord SC-30 to connect - Nikon 4804 | Instruction Manual - Page 111
Flash shooting using SLR cameras not compatible with CLS Available flash modes In close-up flash operation (using cords), the TTL BL, TTL and M flash modes are available. Every time you press the [MODE] button, the available flash mode changes. • Available flash modes vary depending on the cameras - Nikon 4804 | Instruction Manual - Page 112
close-up flash operation (using cords) 112 MODE NO AF-ILL AB SEL READY 1 Turn on the camera and SU-800. After turning on the camera, press the [ON/OFF] button on the SU-800 to turn on the SU-800 and SB-R200. • The red ready-lights on the SU-800 and SB-R200 displayed in decimal format, like 0.3 - Nikon 4804 | Instruction Manual - Page 113
TTL and at a specified output in the M (manual) mode. E AB L SEL READY LOC 6 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter. Flash shooting using SLR cameras not compatible with CLS If the red ready - Nikon 4804 | Instruction Manual - Page 114
actually taking the picture. Using the Target Light (Focus-assist Illuminator) in close-up flash operation (using cords) SEL READY LOCK Press the Target Light button on the SU-800 for more than one second, the Target Light on the SB-R200 lights up. • The Target Light illuminates for 60 seconds - Nikon 4804 | Instruction Manual - Page 115
flash modes, troubleshooting, Speedlight care, Specifications, and optional accessories. 1 Available flash modes 2 Usable lenses with limited functions with the SB-R200 3 Notes on continuous flash operation 4 Optional accessories 5 Tips on Speedlight care 6 Notes on batteries 7 Troubleshooting - Nikon 4804 | Instruction Manual - Page 116
modes The TTL and M (manual) flash modes are available with the SU-800 and SB-R200. Use of TTL mode is recommended for normal flash photography. • Be sure to read the instruction manual of the camera in use. TTL auto flash mode In this mode, the flash illumination that is reflected back from - Nikon 4804 | Instruction Manual - Page 117
above. For example, at a 1:2 reproduction ratio, refer to applicable aperture at 1:1 or 1:3. • When the Extreme Close-Up Positioning Adapter SW-11 is used with the SB-R200, the flash light amount varies depending on reproduction ratios (increases when the shooting distance is approx. 15cm (5.9 in - Nikon 4804 | Instruction Manual - Page 118
mode. Available flash output level In close-up flash operation: M1/1 to M1/64. In Commander flash operation: M1/1 to M1/128. In Repeating flash operation: M1/8 to M1/128. Determining the aperture and flash output level in the M (manual) mode In the Manual mode, use the following guide number and - Nikon 4804 | Instruction Manual - Page 119
the instruction manual of your Speedlight. Notes on performing flash operation in the Auto Aperture flash mode When taking a distant subject, underexposure may occur even though the subject is within the flash shooting distance range. Use of the TTL auto mode is recommended with cameras compatible - Nikon 4804 | Instruction Manual - Page 120
R200 Maximum number of SB-R200 SY-1-77 SY-1-77 SY-1-77 SY-1-77 Max. number of flash units Up to 4 Up to 4 Up to 4 Up to SY-1-67 Max. number of flash units Up to 4 Up to 2 Up to 2 Manual focus Nikkor lenses Lens Nikkor SY-1-52 SY-1-72 SY-1-52 Max. number of flash units Up to 2 Up to 4 Up to 2 Up - Nikon 4804 | Instruction Manual - Page 121
which vignetting occurs Lens Digital SLR (Nikon DX 135 format (24- format) cameras 36mm) SLR cameras AF Nikkor 28mm f/1.4D No vignetting or shorter - When using the SB-R200 attached to the lens Be careful not to knock and damage the lens when using the SB-R200 units attached to the front - Nikon 4804 | Instruction Manual - Page 122
3 Notes on continuous flash operation (in close-up flash operation (using cords)) WARNING Do not exceed the maximum number of continuous firings You should allow the Speedlight to cool off for at least 10 minutes after the maximum number of continuous firings are performed as shown in the table - Nikon 4804 | Instruction Manual - Page 123
Cord SC-30 Close-up flash operation (using cords) is possible in the TTL mode with the optional TTL Cord SC-30 to connect the SU-800 and the SB-R200. Color Filter Set SJ-2 A total of 20 filters in 8 models are provided. • FL-G1 (for fluorescent light) • FL-G2 (for fluorescent light) • TN-A1 (for - Nikon 4804 | Instruction Manual - Page 124
a heater or stove, as this may cause damage. • When not using the Speedlight for more than two weeks, be sure to remove the battery to prevent damage due to battery leakage. • Take the Speedlight out once a month, insert the battery, and fire the unit several times to reform the capacitor. • When - Nikon 4804 | Instruction Manual - Page 125
or recharge a battery. Replacing the battery The low battery-power indicator blinks when the Commander SU-800's ready-light does not come on within approx. 30 seconds of the power being turned on or after the flash has fired. • Replace the battery. SPWEIERDELLIEGSHST R S ON/OFF When the SB-R200 - Nikon 4804 | Instruction Manual - Page 126
the following items to determine the cause of the problem before taking your Speedlight to a Nikon service center for repair. Warning indications in the Commander SU-800 and the Remote Speedlight SB-R200 In the close-up mode Using cords warning With CLS-compatible cameras, if the SU-800 and the SB - Nikon 4804 | Instruction Manual - Page 127
SU-800 is mounted on CLS-compatible cameras, the SU-800 and SB-R200 will not work if these units are connected using cords. Warning indicators will appear. Incompatible camera warning The SU-800 cannot be used with COOLPIX 8400 and COOLPIX 8800 digital cameras, the Wireless flash indicator blinks as - Nikon 4804 | Instruction Manual - Page 128
-R200 is used as a wireless remote flash unit, the red ready-light rapidly blinks four times and stops for 0.5 sec. This cycle is repeated six times if the flash unit receives a signal such as Non-TTL auto flash or Repeating flash. Problems with the Commander SU-800 and the Remote Speedlight SB-R200 - Nikon 4804 | Instruction Manual - Page 129
viewfinder Problem The ready-light inside camera's viewfinder blinks when the SU-800 is mounted on cameras not compatible with CLS and the flash mode is set to TTL in close-up flash operation (using cords). Solution Set the flash mode to M (manual). A note on microcomputer-controlled Speedlights - Nikon 4804 | Instruction Manual - Page 130
8 Specifications Wireless Speedlight Commander SU-800 Transmission mode Infrared-pulse emitting communication using a flash discharge tube Transmission range Approx. 20m (66 ft.) for SB-800/SB-600 Approx. 4m (13 ft.) for SB-R200 at normal settings No. of channels 4 No. of groups 3 No. of - Nikon 4804 | Instruction Manual - Page 131
series circuitry (for wireless remote flash unit only) Guide number 10/33 (ISO 100, m/ft.), 14/46 (ISO 200, m/ft.) Angle of coverage Covering light distribution of 24mm lens; 60° (vertical) and 78° (horizontal) Flash mode i-TTL, D-TTL, TTL (film-based cameras) M (manual) Recycling time Approx - Nikon 4804 | Instruction Manual - Page 132
Wireless Lighting 26 AF-Assist Illuminator 91 Attachment Ring 24 Auto Aperture flash 119 Auto FP High-Speed Sync 96 Automatic Balanced Fill-Flash 21 B Batteries 125 C CLS 7 CLS-compatible cameras 20 Cameras compatible with CLS 13 Channel 21 Close-up flash operation (using cords 110 Close - Nikon 4804 | Instruction Manual - Page 133
Nikon Close-up Speedlight Remote Kit R1 15 Nikon Creative Lighting System (CLS)....... 7 Number of flashes 95 R R1 15 R1C1 15 Ready-light 18, 23 Recommended cameras 13 Recommended lenses 13 Remote flash unit 26, 82 Remote Speedlight 23 Repeating flash 90 Replace the battery 125 S SB-R200 - Nikon 4804 | Instruction Manual - Page 134
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. TT5J00200101(11) 8MSA2211--
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
 |
 |
En
Instruction Manual
R1C1
R1
Nikon Close-up Speedlight Commander Kit
Nikon Close-up Speedlight Remote Kit
SU-800
SB-R200
Wireless Speedlight Commander
Wireless Remote Speedlight