Nikon COOLPIX L610 Reference Manual - Page 199

Auto Off d button M z tab M Auto off M k button If no operations are performed for a specified amount of time, the monitor turns off and the camera enters standby mode to save power (A 23). This setting determines the amount of time that passes before the camera enters standby mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min. C When the Monitor Has Turned Off to Save Power • When the camera is in standby mode, the power-on lamp flashes. • If no operations are performed for approx. another three minutes, the camera turns off automatically. • When the power-on lamp is flashing, pressing any of the following buttons turns the monitor back on: ➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) button C Notes About Auto Off • The time that passes before the camera enters standby mode is fixed in the following situations: - When a menu is displayed: Three minutes (when auto off is set to 30 s or 1 min) - During slide show playback: Up to 30 minutes - When the audio/video cable is connected: 30 minutes - When an HDMI cable is connected: 30 minutes • The camera does not enter standby mode while the Eye-Fi card is uploading images. E81 Reference Section