Nikon COOLPIX W300 SnapBridge Connection Guide - English
Nikon COOLPIX W300 Manual
 |
View all Nikon COOLPIX W300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Nikon COOLPIX W300 manual content summary:
- Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 1
Connection Guide (for COOLPIX) Table of Contents Preparing a Smart Device...2 Pairing the Camera and a Smart Device 2 Image Upload ...5 Tips on Pairing...7 This document uses Version 1.3 of the SnapBridge app as an example for explanations. You can do the following when you establish a wireless - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 2
on SnapBridge. Pairing cannot be performed from the Bluetooth settings screen on the smart device. Pairing the Camera and a Smart Device • Use a sufficiently charged battery so that the camera does not turn off during the procedure. • Insert a memory card with sufficient free space into the - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 3
Camera name displayed, scroll down the screen.). Tap the camera name again when the accessory selection screen is displayed (it may take some time for the camera name to be displayed.). • If the camera that the camera and smart device display the same authentication code (six digits). • The - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 4
pairing, press the d button and set the time zone, date, and time. Your camera and smart device are connected! SnapBridge will send your photos to your smart device as they are taken. Next 8 Follow the on-screen instructions in the camera to complete the setup process. • To record location data - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 5
them to the smart device. x Camera tab in SnapBridge x Camera tab in SnapBridge 1 When Network menu M Bluetooth M Send while off in the camera is set to On, images are uploaded to the smart device even when the camera is turned off. 2 AVI format movies (COOLPIX A300 movies) cannot be uploaded - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 6
name at default) and password displayed on the dialog in the smart device, and then tap Go. The device will connect to the camera via Wi-Fi. Select "Camera name_XXXXXXXX" for "Wi-Fi" in the iOS "Settings" display and enter the password "XXXXXXXXX" to enable remote photography. Tap "Go" to go to - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 7
link in SnapBridge. You can reduce battery consumption of the smart device by disabling this setting. Unpairing • To pair with another SnapBridge-supported camera, use SnapBridge to remove the registration of a paired camera in advance. • If you have problems transferring images to a smart device - Nikon COOLPIX W300 | SnapBridge Connection Guide - English - Page 8
device in the camera and press the k button. • Follow the instructions in "Pairing the Camera and a camera name). • The camera and smart device screens shown in this manual may differ from those of the actual products. • Trade names mentioned in this manual or documentation provided with your Nikon
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
-1-
Table of Contents
Preparing a Smart Device
.........................................................................................................
2
Pairing the Camera and a Smart Device
.............................................................................
2
Image Upload
...............................................................................................................................
5
Tips on Pairing
..............................................................................................................................
7
This document uses Version
1.3
of the SnapBridge app as an example
for explanations.
You can do the following when you establish a wireless connection
(continuous connection via
Bluetooth
® low energy technology,
hereinafter referred to as “pairing”) between a SnapBridge-supported
camera and a smartphone/tablet (hereinafter referred to as “smart device”) with
SnapBridge installed.
Image Upload
You can upload still images and movies* captured with the camera to the smart
device, or display the shooting screen on the smart device and capture still images
remotely. See “Image Upload” (page 5) for more information.
*
AVI format movies (COOLPIX A300 movies) cannot be uploaded.
Other Features
•
Obtaining location data and synchronizing the date and time
•
Imprinting information on images such as shooting date and time and comments
C
SnapBridge
•
For an overview, you can also visit the dedicated Nikon website.
•
See the online help for details on how to use SnapBridge (after pairing, you can refer to
the
Other
tab
M
Info/settings
M
Instructions
in SnapBridge).
http://nikonimglib.com/snbr/onlinehelp/en/index.html
•
Use the latest version of SnapBridge. Operation of SnapBridge may vary depending on the
app version.
Connection Guide (for COOLPIX)