Nikon D100 Product Manual - Page 184
Direct USB Connection - quick start guide
UPC - 018208252718
View all Nikon D100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Connections-Connecting to a Computer Connecting to a Computer Direct USB Connection Before connecting the camera to your computer via the UC-E4 USB cable included with your camera, you must install Nikon View 5 (provided) or Nikon Capture 3 (available separately). Installation instructions for Nikon View 5 are provided in the Quick Start Guide. Once you have installed the necessary software, you can connect the camera and computer as detailed below. 1 Turn the computer on and wait for the operating system to start up. 2 Turn the camera off. 3 Connect the UC-E4 cable directly to the computer using the flat connector. Connect the other end of the cable to the camera's USB connector. Do not connect the cable to a USB hub or keyboard. Use an AC Adapter To ensure that data transfer is not interrupted, be sure that the battery is fully charged. If in doubt, charge the battery before use or use an EH-5 AC adapter (available separately; 180). 172