Nikon D100 Product Manual - Page 194

Optional Accessories Technical Notes-Optional Accessories ■ AR-3 Cable Release Cable release The AR-3 can be attached to the camera release terminal to reduce camera shake in situations that demand slow shutter speeds, such as night landscape, astronomical, and close-up photography. Remote The MB-D100 multi-function battery pack is equipped with a tenterminal pin remote terminal for remote-control and automatic photography. accessories The following accessories can be used with the MB-D100: Accessory Description Length* MC-20 Remote Cord Remote shutter release; can be used to reduce camera shake. Equipped with time-exposure and timer features, emitting a beep once a second while the shutter is open. 80 cm/ 2´7˝ MC-21 Extension Cord Can be connected to MC-series 20, 22, 25, or 30. 3 m/ 9´10˝ MC-22 Remote Cord Remote shutter release with blue, yellow, and black terminals for connection to a remote shutter-triggering device, allowing control via sound or electronic signals. 1 m/3´3˝ MC-23 Connecting Cord Connects two D-100 cameras (both with MB-D100 multi- 40 cm/ function battery packs) for simultaneous operation. 1´4˝ Ten-pin to two-pin adapter cord for connection to deMC-25 vices with two-pin terminals, including the MW-2 radio 20 cm/ Adapter Cord control set, MT-2 intervalometer, and ML-2 modulite 8˝ control set. MC-30 Remote shutter release; can be used to reduce camera 80 cm/ Remote Cord shake or keep the shutter open during a time exposure. 2´7˝ ML-2 Modulite Allows infrared remote control at ranges of up to 100 m Remote (328´). Use multiple units for remote control over great- - Control Set er distances. Requires MC-25 adapter cord. ML-3 Modulite Remote Control Set Allows infrared remote control at (26´). ranges of up to 8 m - * All figures are approximate. ■ Nikon Capture 3 Software Use Nikon Capture 3 to capture photos to a computer and to edit and save RAW images in a different format. 182