Nikon D100 Product Manual - Page 207

Specifications Technical Notes-Specifications White balance Built-in Speedlight Guide number (m/ft) D-TTL Manual Illuminating angle Flash Sync contact Flash control Flash sync modes Flash-ready indicator Accessory shoe Storage Media File system Compression TTL white balance control with white balance bracketing Pop-up Speedlight with button release 17/56 (ISO 200); 12/39 (ISO 100) 18/59 (ISO 200); 12.7/42 (ISO 100) Same as 20-mm lens X-contact only; flash synchronization at up to 1/180 s • Automatic balanced fill flash controlled by five-seg- ment TTL multi sensor with single-component IC. Supports 3D multi-sensor balanced fill flash for digital SLR (built in Speedlight or SB-series 80DX/50DX/ 28DX with type G or D lens) and multi-sensor balanced fill flash for digital SLR (built in Speedlight or SB-series 80DX/50DX/28DX with other CPU Nikkor lens) • Non-TTL auto • Aperture-linked auto flash control available with CPU lenses and SB-series 80DX/50DX/28DX • Flash exposure compensation (-3 - +1 EV in increments of 1/3 or 1/2 EV) Front-curtain sync (normal), red-eye reduction, red-eye reduction with slow sync, slow sync, rear curtain Lights when built-in Speedlight or SB-series 80DX, 50DX, 28DX, 28, 27, or 22s is fully charged; blinks for three seconds after flash is fired at full output Standard ISO hot-shoe contact with safety lock Type I and II CompactFlash™ cards; Microdrives® Compliant with Design Rule for Camera File Systems (DCF) and Digital Print Order Format (DPOF) • Compressed NEF (raw): 12-bit lossless compression • JPEG: JPEG baseline compliant 195