Nikon R1 Wireless Close-Up Speedlight System Users Manual - English
Nikon R1 Wireless Close-Up Speedlight System Manual
View all Nikon R1 Wireless Close-Up Speedlight System manuals
Add to My Manuals
Save this manual to your list of manuals |
Nikon R1 Wireless Close-Up Speedlight System manual content summary:
- Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 1
En Nikon Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 User's Manual - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 2
instructions marked with this symbol could result in property damage. WARNINGS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight 's electrical components, and then bring the flash unit to your local Nikon dealer or authorized service center for repair. 5 If you detect - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 3
the speedlight and then bring the unit to your local Nikon dealer or authorized service center for repair. Note: electronic devices that are penetrated by water or moisture are often not economically repairable. 7 Do not use the unit in the presence of flammable or explosive gas. If the flash unit - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 4
For your safety CAUTIONS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 1 Do not touch the flash unit with wet hands, as this could cause an electric shock. 2 Keep the flash unit away from children to prevent them from putting the unit in or near their mouth, - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 5
skin. 7 Always follow the warnings and instructions printed on the batteries to avoid activities that use only batteries specified in this user's manual, to avoid the possibility of batteries replacing batteries after continuous flash use, because batteries may generate heat during continuous flash - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 6
manuals handy for quick reference. Main features and functions This Speedlight system, which features the Nikon Creative Lighting System (CLS), provides a variety of wireless multiple flash and close-up flash operations. The Speedlight system mainly consists of the Wireless Speedlight Commander SU - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 7
is less affected by ambient light (p. 116). • Advanced Wireless Lighting The wireless multiple flash operation in TTL (i-TTL) mode can be accomplished with CLS-compatible cameras. The remote flash units can be divided into three groups and flash output can be independently controlled for each group - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 8
CLS. • "Cameras compatible with Nikon Creative Lighting System" are abbreviated as "CLS-compatible cameras." • In this manual, the Wireless Speedlight Commander SU-800 is called the "Commander SU-800" or "SU-800" and the Wireless Remote Speedlight SB-R200, the "Remote Speedlight SB-R200" or "SB-R200 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 9
parts, their functions, and accessories 18 SU-800's LCD panel and icons 20 • Wireless multiple flash operation in the Nikon Creative Lighting System (CLS 26 Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1 (Used with Nikon CLS-compatible cameras 27 • Procedures for - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 10
68 • Procedures for close-up flash operation 70 Details on Commander flash operation and shooting procedures (Used with CLS-compatible cameras) • Commander flash operation 80 • Overview of Commander flash operation 82 • Procedures for Commander flash operation 84 Other functions • Test - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 11
(using cords 122 • Optional accessories 123 • Tips on Speedlight care 124 • Notes on batteries 125 • Troubleshooting 126 • Specifications 130 • Index 132 Preparation Flash operation using the R1C1 Flash operation using the R1 Functions and use of the SU-800 Functions and use of the SB-R200 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 12
such as weddings and graduations. Have Nikon regularly spot-check your Speedlight Nikon recommends that you have your Speedlight serviced by an authorized dealer or service center at least once every two years. Using your Speedlight correctly The Nikon Speedlight's performance has been optimized for - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 13
of the remote flash unit(s) to group A when performing wireless multiple flash with a Nikon D70-Series camera's built-in flash as a Commander, otherwise the remote flash unit(s) will not fire. u With SLR cameras incompatible with CLS Use the TTL Cord SC-30 (optional) to connect the SU-800 and the SB - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 14
not autofocus correctly, or may lead to damage of the lens or camera's autofocus mechanism due to the weight of the flash head. Therefore, do not perform autofocus operation, but use manual focus instead. v Using an AF Micro-Nikkor 60mm f/2.8D lens • Be sure to attach the Dedicated Adapter Ring UR - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 15
Users of the Nikon Close-up Speedlight Commander Kit R1C1 should read through this user's manual. Users of the Nikon Close-up Speedlight Remote Kit R1, Commander SU-800 and Remote Speedlight SB-R200 should read the sections necessary for each kit. Products Available flash Usable cameras operations - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 16
Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 WCIOREMLMEASNSDSEPREESDUL-I8G0H0T Wireless Speedlight Commander SU-800 Soft Case SS-SU800 for SU-800 Attachment Ring SX-1 Adapter Ring Set (5 rings) (x1) 4 3 2 1 C B A ON/OFF WISRPEELEEDSLSIGRHETMOTSEB-R200 IR Panel for Built-in Flash SG-3IR - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 17
AS-20 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 Attachment Ring SX-1 Adapter Ring Set Extreme Close-Up Positioning Adapter SW-11 for SB-R200 Color Filter Holder SZ-1 Color Filter Set SJ-R200 (for SB-R200 package) Speedlight Stand AS-20 IR Panel for Built-in Flash SG - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 18
parts, their functions, and accessories Wireless Speedlight Commander SU-800 13 WIRELESS SPEEDLIGHT COMMANDER SU-800 ON/OFF B A MODE SEL NO AF-ILL READY LOCK 4 1 2 3 9 8 7 10 COWMIMREALNEDSESRSSPUE-E80D0LIGHT 11 12 65 1 LCD Panel (p. 20) 2 Control Buttons 3 Ready-light Lights - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 19
a malfunction when carrying the SU-800 in your camera bag, turn off the flash unit. 15 [SEL](FUNC.) Commander/Close-up select switch) to their default values. The LCD panel will blink 3 times. Using the SU-800 in low light Press any button on the SU-800 to turn the illuminator on (when the SU-800 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 20
Icons in close-up flash operation Display in TTL mode 1 Wireless Flash A control signal is sent from the SU-800 to the remote flash units such as the SB-R200. 2 Close-up Mode Close-up function is set to "activated." 3 Monitor Preflashes Just before the flash fires, the Speedlight fires a series of - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 21
1 Wireless Flash A control signal is sent from the SU-800 to the remote flash units such as the SB-R200. 2 Commander Mode Commander function is activated. 3 Low Battery-power Replace the battery. 4 Channel Represents the communication channel number through which the Commander and Speedlight - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 22
Speedlight parts, their functions, and accessories 8 Using Cords The SU-800 is connected to the SB-R200 using cords when mounted on cameras not compatible with CLS. This indicator blinks if the SB-R200 is not correctly connected. 9 Flash Output Level Compensation Value (Groups A, B) Indicates the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 23
the power on or off. To avoid accidental firing or a malfunction when carrying the SB-R200 in your camera bag, turn off the flash unit. 9 TTL cord terminal Connects the SU-800 to the SB-R200 via a cord when used with cameras that are not compatible with CLS (p. 110). 10 Terminal cover Close the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 24
be attached to a tripod (p. 107). Speedlight mounting shoe Tripod socket IR Panel for Built-in Flash SG-3IR The SG-3IR can be attached to a camera's hot shoe when a Nikon digital camera's built-in flash (such as D70-Series) is used as a Commander (p. 50). Extreme Close-Up Positioning Adapter - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 25
SS-R200 for SB-R200 SB-R200 AS-20 SZ-1 Close-up Speedlight Kit Case SS-MS1 SJ-R200 SS-MS1 WIRELESS SPEEDLIGHT COMMANDER SU-800 SWIPREEELDELISSGHRTEMSOB-TER200 The SC-30 is optional. AS-20 SW-12 Caring for the Close-up Speedlight Kit Case SS-MS1 • Do not clean the case with a moistened cloth - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 26
Advanced Wireless Lighting). u Master flash unit and remote flash unit(s) In this user's manual, the Commander SU-800 and Speedlight mounted on the camera, a built-in flash or the one directly connected to the camera via a TTL Cord is called the Master/Commander flash unit. All other flash units are - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 27
camera when using the Nikon Close-up Speedlight Commander Kit R1C1. • For details on close-up flash operation, see page 65. • For details on Commander flash operation, see page 79. Procedures for close-up flash operation 1 Installing batteries in the SU-800. 2 Attaching the SU-800 to the camera - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 28
the Commander/Close-up select switch in the battery chamber is set to "Close-up" position. Replacing the battery The Low Battery-power Indicator blinks when the SU-800's ready-light does not come on within about 30 seconds of turning on the power or after the flash has fired. • Replace the battery - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 29
SEL READY LOCK 2 Rotate the Mounting Foot-lock lever to the left, slide the SU-800's Mounting Foot into the camera's accessory shoe and turn the lock lever to the right. v Mounting Foot-lock lever To lock the Speedlight in place, turn the lock lever clockwise approx. 90° until it stops. To unlock - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 30
close the battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When the SB-R200's battery power is weak, the green ready-light blinks after the power is turned on or after the flash has fired. • Replace the battery. 30 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 31
z Flash operation using the R1C1 4 Attaching the SB-R200 to the front of the lens. Ring SX-1's Mounting Buttons on both sides to attach it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands to press - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 32
Procedures for close-up flash operation 5 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at click stops every 15°. u Using the SB-R200 off-lens Use the provided Speedlight Stand AS-20 to - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 33
in green when the power is on, then turns red when the SB-R200 is fully recycled. SPWEIERDELLIEGSHST R S ON/OFF 2 Check the indicators on the SU-800's LCD panel. Confirm that Wireless flash, Close-up mode and CLS-compatible camera indicators are all displayed on the LCD panel (p. 20). 33 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 34
button on the SU-800 to set the flash mode to TTL. Use of TTL mode is recommended for normal flash shooting. AB ON/OFF 2 Confirm the flash settings of the SB-R200. Ensure that both Groups A and B are displayed. • If a Group A or B indicator does not appear, the remote flash unit(s) of this Group - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 35
z Flash operation using the R1C1 7 Setting a channel number on the SU-800 and SB-R200. CHANNEL 34 2 1 1 Set a channel number on the SU-800. Press the [SEL](FUNC.) button to display channel number (blinking). Press the [W] or [X] button to change the channel number. Press the [SEL](FUNC.) button - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 36
close-up flash operation 8 Setting a group on the SB-R200. GROUP C B A CHANNEL 34 1 Set a group on each SB-R200. Rotate the [GROUP] select dial on each flash unit to set the group to A or B. Once set, the SB-R200 will operate according to the controls for each group as set on the SU-800. 36 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 37
SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the SB-R200 will blink for approx. 3 sec. (The readylights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, set - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 38
for Commander flash operation 1 Setting Commander function on the SU-800. The Commander function enables the SU-800 to act as a Commander unit to trigger remote flash unit(s) without firing itself. 1 Install the battery in the SU-800 in the same way as No. 1 in "Procedures for close-up flash - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 39
3m (9.8 ft) With the SU-800 • Be sure to place all SB-R200 units that are set in the same group close together. • The set up range of the SB-R200 units vary depending on the Commander unit (camera, Speedlight, etc.) For details, see your Speedlight or camera's user's manual. • For notes on setting - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 40
Procedures for Commander flash operation 4 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts down to 60° and up to 45°. The flash head can be set at click stops every 15°. u Attaching the SB-R200 to the front of the lens The SB-R200 can be attached - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 41
3 Turning on the camera, the SU-800 and SB-R200. MODE AB ON/OFF SEL READY LOCK 1 Press the [ON/OFF] buttons to turn on the camera, the SU-800 and SB-R200. Ensure that the red ready-lights on the SU-800 and SB-R200 come on. SPWEIERDELLIEGSHST R S ON/OFF z Flash operation using the R1C1 41 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 42
Procedures for Commander flash operation 4 Set the remote flash unit's flash mode on the SU-800. MODE NO AF-ILL AB SEL READY ON/OFF LOCK 1 Press the [SEL](FUNC.) button to display the flash mode (blinking) of each group, then press [MODE] button to set the flash mode to TTL. Use of TTL mode is - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 43
z Flash operation using the R1C1 5 Setting a channel number and a group on the SU-800 and SB-R200. 1 Set a channel number and a group on the SU-800 and SB-R200 in the same way as No. 7 and 8 in "Procedures for close-up flash operation." (pp. 35, 36) 43 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 44
Procedures for Commander flash operation 6 Compose a picture and shoot with flash. E AB ON L SEL READY LOCK 1 Compose the picture and shoot. Ensure that the red ready-lights on the SU-800 and SB-R200 are on, then release O the shutter. • For details on test firing, refer to page 88. v - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 45
cameras) This section describes the necessary procedures for wireless close-up flash operation with CLS-compatible cameras that feature a Commander function and the Nikon Close-up Speedlight Remote Kit R1. • For details on close-up flash operation, see page 65. 1 Installing batteries in the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 46
Flash operation using the R1 1 Installing batteries in the SB-R200. 1 Slide battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When battery power is weak, the SB-R200's green ready-light blinks when the power is turned - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 47
z Flash operation using the R1 2 Attaching the SB-R200 to the front of the lens. Ring SX-1's Mounting Buttons on both sides to attach it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands to press the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 48
R1 5 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at a click stop every 15°. u Using the SB-R200 off-lens Use the provided AS-20 Speedlight Stand to set up the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 49
3 Turning on the camera and SB-R200. SPWEIERDELLIEGSHST R S ON/OFF 1 Press the [ON/OFF] buttons to turn on the camera and SB-R200. Ensure that the red ready-lights on the camera and SB-R200 come on. z Flash operation using the R1 49 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 50
Usable channel number 1 to 4 3 Usable group A, B A u Using the IR Panel for Built-in Flash SG-3IR Built-in flash units on cameras such as the D70-Series fire at reduced flash output levels when used as Commander units. This may slightly affect results if pictures are taken from close distances. To - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 51
digital camera, otherwise the flash will not fire. GROUP C B A CHANNEL 34 2 Rotate the [GROUP] select dial on the SB-R200 to set the group. • Set the group of the SB-R200 to Group A when using a Nikon D70-Series camera, otherwise the flash unit will not fire. z Flash operation using the R1 51 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 52
test firing, refer to page 88. v If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the SB-R200 will blink for approx. 3 sec. (The - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 53
Functions and use of the SU-800 This section describes the functions and use of the SU-800. 1 SU-800's available flash operations 2 Using the SU-800 3 Functions of the SU-800 53 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 54
flash operations The SU-800 has the following flash operations. Refer to the corresponding pages for details on each flash operation. Available flash operation Usable cameras Usable Speedlights Close-up (p. 65) CLS-compatible cameras SB-R200 Cameras not compatible with CLS*1 Commander - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 55
by sliding it into place. Use CR123A (3V) lithium batteries. Replacing the battery The low battery-power indicator blinks when the SU-800's ready-light does not come on within about 30 seconds of the power being turned on or after the flash has fired. • Replace the battery. 3 Turn off the camera and - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 56
OFF SEL READY LOCK Unlock 5 Press the [ON/OFF] buttons on the camera and SU-800 to turn on the power. • Ensure that the ready-light on the SU-800 comes on. 6 Confirm the SU-800's LCD panel. Ensure that Wireless flash, Close-up mode and CLS-compatible camera indicators are correctly displayed. 56 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 57
's exposure meter-off function With a camera body that is compatible with TTL auto flash, the SU-800 goes into standby mode when the camera's exposure meter turns off. Without a camera body, if the SU-800 is not being used for approx. 40 seconds, the standby function activates and automatically - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 58
value (in TTL mode) • Manual flash output level (in M mode) • Channel number (1, 2, 3, 4) In Commander mode (p. 79) • Flash mode of remote flash unit(s) (TTL, Auto Aperture flash (AA), M, --- (flash canceled), RPT (Repeating) flash) • Group name (A, B, C) • Flash output-level compensation value (in - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 59
Functions and use of the SB-R200 This section describes the functions and use of the SB-R200. 1 SB-R200's available flash operations 2 Using the SB-R200 3 Functions of the SB-R200 59 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 60
corresponding pages for details on each flash operation. Available flash operation Usable cameras and Speedlights Close-up (p. 65) CLS-compatible cameras, cameras not compatible with CLS*1, SU-800 Commander (p. 79) CLS-compatible cameras featuring Commander function, SU-800, SB-910, SB-900, SB - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 61
weak, the green ready-light blinks after the power has been turned on or after the flash has fired • Replace the battery. LOCK 3 Slide the SB-R200's Mounting Foot into the Speedlight Stand AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting Foot cannot be inserted in reverse - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 62
Commander function or Speedlight. For details, see your Speedlight or camera's user's manual. • Be sure to place all SB-R200 units that are set in the same group close together. • For notes on setting up the SB-R200, see "Setting up the SB-R200" on page 108. Group A 3m (9.8 ft) With the SU-800 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 63
SPWEIERDELLIEGSHST R S ON/OFF 6 Press the [ON/OFF] button on the camera, or the SB-910, SB-900, SB-800, SU-800 and SB-R200 to turn on the power. Ensure that the red ready-light on the camera, the SB-910, SB-900, SB-800, SU-800 or on the SB-R200 comes on. z Functions and use of the SB-R200 63 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 64
WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF 3 Functions of the SB-R200 The following functions can be set on the SB-R200. Switching the Target Light (focus assist lamp) on or off Use the Target Light button to illuminate or cancel the Target Light (p. 90). Items to be set • Group name (A, B, C) • - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 65
This section describes in detail wireless close-up flash operation and shooting procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that provides example photos. Be sure to read your camera user's manual for specific information on camera - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 66
Group B: SB-R200 (TTL) A-2, A-3, and A-4 examples in "Close-up Speedlight Photography Examples" were also taken under the same conditions as with A-1. Flash setup SU-800 Group A SB-R200 Group B SB-R200 Dual-light close-up flash operation (one flash unit attached to the front of the lens + one held - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 67
flash output levels between flash units on the right and on the left create more natural looking pictures, enabling the real textures of the material to be revealed. • Group B: SB-R200 (TTL) E-4 example in "Close-up Speedlight SU-800 60mm f/2.8D SB-R200 Group A SU-800 200mm f/4D SB-R200 Group A 67 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 68
operations. Display in dual-light close-up flash operation. Display in triple-light close-up flash operation. Methods for setting up Set up the SU-800 and SB-R200 in the same way as "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). Items to be set The following - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 69
the [MODE] button on the SU-800, the available flash mode changes. • The available flash modes vary, depending on cameras and lenses in use. • The same flash mode is set for both Groups A and B. • In triple-light close-up flash operation, the TTL and M (manual) flash modes are available for Groups - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 70
SB-R200. • Ensure that the red ready-lights on the SU-800 and SB-R200 are on. • Confirm that Wireless flash, close-up mode and CLScompatible camera indicators are correctly displayed on the SU-800 2 Selecting dual-light flash operation. Press and hold the [SEL](FUNC.) button for approx. 2 seconds - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 71
are displayed in decimal format, like 0.3 for 1/3, and 0.7 for 2/3. • Continuously pressing the [W] or [X] button quickly increases or decreases the value. • The flash output level blinks during adjustment and stops after blinking six times unless an adjustment is made. The last value to blink is - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 72
to set the group. Once set, the SB-R200 operates according to the controls as set on the SU-800. 10 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter. • For details on test firing, refer to page 88 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 73
R200 blinks for approx. 3 sec. (The ready-lights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, set a higher ISO sensitivity or use a wider aperture and reshoot. u In the M (manual) mode, set the manual flash output level for Groups A and B. Press the [SEL](FUNC.) button - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 74
SB-R200. • Ensure that the red ready-lights on the SU-800 and SB-R200 are on. • Confirm that Wireless flash, Close-up mode and CLScompatible camera indicators are correctly displayed on the SU-800. 2 Selecting triple-light flash operation. Press and hold the [SEL](FUNC.) button for approx. 2 seconds - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 75
are displayed in decimal format, like 0.3 for 1/3, and 0.7 for 2/3. • Continuously pressing the [W] or [X] button quickly increases or decreases the value. • The flash output level blinks during adjustment and stops after blinking six times unless an adjustment is made. The last value to blink is - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 76
the one that has been set automatically. • Manual flash output level can be set separately for each group. • The flash output level can be set from M1/1 to automatically. 8 Setting a channel number on the SU-800. Set the communication channel numbers of the SU-800 and SB-R200. Press the [SEL](FUNC.) - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 77
to set the group. Once set, the SB-R200 operates according to the controls as set on the SU-800. 11 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter. • For details on test firing, refer to page 88 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 78
78 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 79
describes the details of available wireless Commander flash operation and necessary procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that contains example photos. Be sure to refer to your camera user's manual for specific information on - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 80
SU-800 to act as a Commander unit to trigger remote flash units without firing itself. By rearranging the remote flash setups, you can enjoy rendering a variety of lighting effects. Example D D-1 Flash setup SU-800 SB-R200 Group C SB-800 Group A Triple-light flash operation Three flash units - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 81
8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) • Group C: SB-R200 (M) G-2 example in "Close-up Speedlight Photography Examples" was taken using flash units in Groups A and B. G-3 was taken using flash units in Group A only. 81 z Details on Commander flash operation and shooting procedures - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 82
flash units. The Commander flash unit provides wireless control of the flash operation of 3-grouped (A, B, C) remote flash units. Flash units usable as a Commander unit • Wireless Speedlight Commander SU-800 • CLS-compatible cameras with Commander function • Speedlight SB-910, SB-900, SB-800 Flash - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 83
and remote flash units in the same way as in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 38). Items to be set The following items can be set in Commander flash operation. • Flash mode of remote flash units (TTL, Auto Aperture flash (AA), M, --- (flash canceled), RPT - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 84
operation 1 Press the [ON/OFF] buttons to turn on the camera, the Commander and remote flash units. • Ensure that the red ready-lights come on and the flash units have been fully recycled. • Ensure that Wireless flash, Commander mode and CLS-compatible camera indicators are all displayed on the LCD - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 85
unit(s) to group A when using a Nikon D70-Series camera, otherwise the flash unit(s) will not fire. • With the SB-R200, rotate the [GROUP] select dial to set the group name. • With the SB-910, SB-900, SB-800, SB-700 or SB-600, read the user's manual for each model. 85 z Details on Commander flash - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 86
, SB-900, SB-800, SB-700 or SB-600 is used as a remote flash unit, the red ready-light on the Speedlight in use blinks for 3 sec. after firing. The amount of underexposure is displayed. (For more details, read your Speedlight user's manual.) u In the M (manual) mode, set manual flash output level - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 87
SU-800 and SB-R200. Be sure to refer to your camera user's manual for specific information on camera settings and functions. 1 Test firing to confirm exposure 2 Checking illumination before taking pictures (Modeling Illumination) 3 Using the Target Light (Focus-Assist Illuminator) 4 Autofocus flash - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 88
in Group C in 3 seconds at an M1/64 flash output level. • Flash units in Group A, B or C of which flash firing has been set to "canceled" also fire. In Commander flash operation When the [Test] button on the SU-800 is pressed, the remote flash unit(s) in Group A fires in one second, followed by the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 89
is set to "canceled" does not fire. In the Commander mode SEL READY LOCK Firing by the SU-800 When the Target Light button on the SU-800 is pressed and released within 1 second, the Modeling Illuminators of remote flash units in the groups set to fire, indicated by the icon that is blinking - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 90
can confirm the direction of flash light emitted. Illuminating and canceling the Target Light using the Target Light button on the SU-800 SEL READY LOCK Press and hold the Target Light button on the SU-800 for more than 1 second, all Target Lights on the SB-R200 units light up. • The Target Light - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 91
Commander and Repeating flash operations, if light is too low for normal autofocus operation, the SU-800's AF-Assist Illuminator comes on, enabling you to perform autofocus flash not work in close-up flash operation. • The SU-800's AF-Assist Illuminator supports CLS-compatible cameras' Multi-Area - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 92
of the flash unit (SB-910, SB-900, SB-800 or SU-800) shows only the compensation value set on the flash unit (SB-910, SB-900, SB-800 or SU-800). In Manual flash mode Making exposure compensation for only the flash illuminated subject by intentionally modifying the flash unit's flash output level - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 93
compatible with CLS, the SU-800 controls the flash output of the remote flash units (such as the SB-910, SB-900, SB-800), which are divided into three groups (A, B, and C), independently for each group. • Be sure to read the user's manual of the Speedlight in use. Usable Speedlight SB-910, SB-900 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 94
A, B and C. Setting a group and a channel number on the Speedlight Display when using the SB-800 Set the same channel number as set on the SU-800. • Refer to your Speedlight user's manual for specific information on settings. Setting the flash mode on each group Firing Firing canceled Press the [SEL - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 95
increases or the number of flashes per second decreases because the Speedlight fires during a single exposure. • The maximum number of repeating flashes per frame varies depending on the frequency and flash output level. For more details, refer to your Speedlight user's manual. 95 z Other functions - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 96
FP HighSpeed sync mode on the SU-800 or SB-R200 directly, but must set it on the camera. High-Speed flash synchronization at your camera's highest to blur the background. • Available flash modes are i-TTL, Auto Aperture flash, and Manual flash. Usable flash shooting distance ranges in Auto FP High - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 97
Auto FP High-Speed Sync in Manual flash mode, the SB-R200's flash output level may be extremely low when the manual flash output level is set to a low value. However, this is not a malfunction. Flash output level may also vary depending on the subject matter conditions. Guide number in Auto FP High - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 98
the FV Lock function on the SU-800 or SB-R200 directly. Set it on the camera. Flash Value, or "FV," is the amount of flash exposure for the subject. Using FV Lock with compatible cameras, you can lock in the appropriate flash exposure for the main subject. This flash exposure remains locked in, even - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 99
user's manual for specific information on camera settings and functions. 1 Flash shooting with colored gel filters 2 Flash shooting with the Extreme Close-Up Positioning Adapter SW-11 3 Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 4 Flash shooting with Speedlight Stand AS - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 100
-up Speedlight Photography Examples" was taken in dual-light flash operation with two different colored gel filters. I-2 was taken using triple-light flash operation without a colored gel filter. I-4 was taken in dual-light flash operation without a colored gel filter. Flash setup SU-800 Group - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 101
a similar procedure when shooting flash pictures under incandescent/tungsten illumination Speedlight. Choose an appropriate white balance setting on your digital camera. For more details, see your camera user's manual printed on each filter is provided as a guide only. Be sure to make test shots to - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 102
the Color Filter Holder SZ-1. 2 Attach the SZ-1 to the SB-R200. WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF White bal. Auto Incandescent Fluorescent Dir. sunlight Flash 3 Adjust the white balance setting on your digital camera, then shoot. • For details on test firing, refer to page 88. Using colored - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 103
units. As the flash light is curved toward the optical axis, extremely vivid color images can be created while sufficient background illumination is guaranteed. • Camera: D70 • Lens: AF Micro-Nikkor 60mm f/2.8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) G-5 example in "Close-up Speedlight - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 104
with the Extreme Close-Up Positioning Adapter SW-11 3 Tilt the SB-R200's flash head down 60° toward the optical axis. 0˚ 60˚ u Using the Extreme Close-Up Positioning Adapter SW-11 effectively Use the SW-11 when taking flash pictures at close distance for more effective results. Be sure to tilt the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 105
-up Speedlight Photography Examples" was taken under the same conditions as was C-1. C-2 and C-5 were taken without using the Diffuser SW-12. C-3 was taken using a single built-in flash. Flash setup Group B SB-R200 SU-800 SW-12 Dual-light flash shooting (with Diffuser SW-12) Two SB-R200 units - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 106
3 Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 Attachment of the Flexible Arm Clip SW-C1 to the SX-1 1 Align one - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 107
Use the provided Speedlight Stand AS-20 to freely position the SB-R200. The Attachment Ring SX-1 can be attached to a tripod. Example H H-1 Flash setup SU-800 Group A SB-R200 Dual-light flash operation When shooting clear glasses (H-4) with a single built-in flash unit, distinct shadows appear - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 108
is an obstacle between the Commander unit and the SB-R200. Group A 3m (9.8 ft) With the SU-800 • The effective shooting distance between the Commander and the SB-R200 varies depending on the Commander unit (such as a camera or Speedlight) in use. Refer to the user's manual of each product. • Be - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 109
Flash shooting using SLR cameras not compatible with CLS Use the TTL Cord SC-30 (optional) to connect the SU-800 to the SB-R200 with SLR cameras not compatible with CLS. 1 Overview of close-up flash operation (using cords) 2 Procedures for close-up flash operation (using cords) 109 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 110
1 Setting up the SU-800 and SB-R200. Set up the SU-800 and SB-R200 in the same way as described in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). • The same set-up is applicable when using the Speedlight Stand AS-20. 2 Connect the flash units using cords. Use the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 111
skipped and do not appear when pressing the [MODE] button. • The same flash mode is set for groups A and B. Display in TTL BL flash mode Display in TTL flash mode Display in M (manual) flash mode Items to be set in close-up flash operation (using cords) The following items can be set in close-up - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 112
LO 3 Activating or canceling the SB-R200's flash firing Press the [A B] select button to set the remote flash units in Group A or B to fire or to cancel. • A remote flash unit on the left as viewed from the SU-800's LCD panel is assigned to Group A, and a flash unit on the right is assigned to Group - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 113
/OFF LOCK 5 Press the [Test] button to test fire the flash units. Press the [Test] button on the SU-800 to test fire the SB-R200. • Flash units fire at an M1/64 flash output in the TTL and at a specified output in the M (manual) mode. E AB L SEL READY LOC 6 Compose a picture and shoot with - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 114
cast on the subject before actually taking the picture. Using the Target Light (Focus-assist Illuminator) in close-up flash operation (using cords) SEL READY LOCK Press the Target Light button on the SU-800 for more than one second, the Target Light on the SB-R200 lights up. • The Target Light - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 115
This section covers available flash modes, troubleshooting, Speedlight care, Specifications, and optional accessories. 1 Available flash modes 2 Usable lenses with limited functions with the SB-R200 3 Notes on continuous flash operation 4 Optional accessories 5 Tips on Speedlight care 6 Notes on - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 116
The TTL and M (manual) flash modes are available with the SU-800 and SB-R200. Use of TTL mode is recommended for normal flash photography. • Be sure to read the user's manual of the camera in use. TTL auto flash mode In this mode, the flash illumination that is reflected back from the subject - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 117
: 5 1 : 3 1 : 1 1 : 10 1 : 5 1 : 3 1 : 1 1 : 10 1 : 5 1 : 3 1 : 1 25 50 100 200 400 800 1600 60mm f/2.8D 60mm f/2.8G ED 105mm f/2.8D 105mm f/2.8G IF-ED 200mm f/4D IF-ED DX 85mm units are attached to the Attachment Ring SX-1 on both sides with flash output level ratio set to 1:1, and two flash units - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 118
mode. Available flash output level In close-up flash operation: M1/1 to M1/64. In Commander flash operation: M1/1 to M1/128. In Repeating flash operation: M1/8 to M1/128. Determining the aperture and flash output level in the M (manual) mode In the Manual mode, use the following guide number and - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 119
mode display blinks as a warning, and the flash units will not fire. • For flash shooting distance range in the Auto Aperture flash mode, read the user's manual of your Speedlight. v Notes on performing flash operation in the Auto Aperture flash mode When taking a distant subject, underexposure may - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 120
72 SY-1-72 SY-1-62 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 Max. number of flash units Up to 2 Up to 4 Up to 2 Up to 2 Up to 4 Up to 4 Up to 4 Up to 2 Up DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED SY-1-67 Max. number of flash units Up to 2 Up to 4 Up to 4 Up to 2 Up to 2 120 - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 121
Manual focus NIKKOR lenses Lens SY-1-62 SY-1-52 SY-1-52 SY-1-72 SY-1-52 SY-1-72 SY-1-52 Max. number of flash units Up to 2 Up to 2 Up to 2 Up to 4 Up to 2 Up to 2 vignetting occurs Lens Nikon DX format digital SLR cameras 35mm (135) format Nikon film-SLR cameras and Nikon FX format digital SLR - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 122
of continuous firings Flash mode TTL auto flash Manual flash (Flash output level: M1/1, M1/2) Manual flash (Flash output level: M1/4 to M1/64) Max. number of continuous firings (at 6 frames/sec.) 15 30 CAUTION Be careful when replacing batteries after continuous flash use, because batteries - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 123
TTL Cord SC-30 Close-up flash operation (using cords) is possible in the TTL mode with the optional TTL Cord SC-30 to connect the SU-800 and the SB-R200. Color to the heat generated by the flash firing. Therefore, it is recommended to check and replace these filters when necessary. Dedicated Adapter - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 124
may also impair your health. Cleaning • Use a blower brush to remove dirt and dust from the Speedlight and clean it with a soft, clean cloth. After using the Speedlight near saltwater, wipe the flash unit with a soft, clean cloth moistened slightly with tap water to remove the salt, then dry it - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 125
the battery The low battery-power indicator blinks when the Commander SU-800's ready-light does not come on within approx. 30 seconds of the power being turned on or after the flash has fired. • Replace the battery. SPWEIERDELLIEGSHST R S ON/OFF When the SB-R200's battery power is weak, the - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 126
7 Troubleshooting If the Speedlight malfunctions or a warning indication appears on the Speedlight's LCD panel, use the following items to determine the cause of the problem before taking your Speedlight to a Nikon service center for repair. Warning indications in the Commander SU-800 and the Remote - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 127
SB-R200 will not work if these units are connected using cords. Warning indicators will appear. Incompatible camera warning The SU-800 cannot be used with COOLPIX-Series cameras other than COOLPIX P7100, P7000 and P6000. If used, the Wireless flash indicator blinks as a warning. Incompatible lens - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 128
a wireless remote flash unit, the red ready-light rapidly blinks four times and stops for 0.5 sec. This cycle is repeated six times if the flash unit receives a signal such as Non-TTL auto flash or Repeating flash. Problems with the Commander SU-800 and the Remote Speedlight SB-R200 Problem Cause - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 129
viewfinder Problem The ready-light inside camera's viewfinder blinks when the SU-800 is mounted on cameras not compatible with CLS and the flash mode is set to TTL in close-up flash operation (using cords). Solution Set the flash mode to M (manual). A note on microcomputer-controlled Speedlights - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 130
8 Specifications Wireless Speedlight Commander SU-800 Transmission mode Transmission range No. of channels No. of groups No. of transmissions Transmission interval Flash light wavelength Flash coverage Display AF-Assist Illuminator Power source Weight Dimensions (W x H x D) Infrared-pulse - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 131
Wireless Remote Speedlight SB-R200 Electronic construction Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash unit only) Guide number 10/33 (ISO 100, m/ft), 14/46 (ISO 200, m/ft) Angle of coverage Covering light distribution of 24mm lens; 60° ( - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 132
etc. on the LCD panel, refer to "Speedlight parts, their functions, and accessories" (p. 18) and "SU-800's LCD panel and icons" (p. 20). Symbol Colored gel filters 100 Commander 82 Commander mode 79 Commander/Close-up select switch ....... 58 Continuous flash shooting 122 Control button - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 133
Commander Kit R1C1 15 Nikon Close-up Speedlight Remote Kit R1 15 Nikon Creative Lighting System (CLS)....... 7 Number of flashes 95 R R1 15 R1C1 15 Ready-light 18, 23 Recommended cameras 13 Recommended lenses 13 Remote flash unit 26, 82 Remote Speedlight 23 Repeating flash 93 Replace - Nikon R1 Wireless Close-Up Speedlight System | Users Manual - English - Page 134
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Printed in Europe TT2I10(11) 8MSA2211-10
En
User’s Manual
R1C1
R1
Nikon Close-up Speedlight Commander Kit
Nikon Close-up Speedlight Remote Kit
SU-800
SB-R200
Wireless Speedlight Commander
Wireless Remote Speedlight