Nikon SB-R200 Wireless Speedlight Users Manual - English
Nikon SB-R200 Wireless Speedlight Manual
 |
View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Nikon SB-R200 Wireless Speedlight manual content summary:
- Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 1
En Nikon Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 User's Manual - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 2
instructions marked with this symbol could result in property damage. WARNINGS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 electrical components, and then bring the flash unit to your local Nikon dealer or authorized service center for repair. 5 If you - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 3
remove the batteries from the speedlight and then bring the unit to your local Nikon dealer or authorized service center for repair. Note: their eyes' retinas. Never fire the flash unit closer than 1 meter from infants. 10 Do not fire the unit while the flash head is touching a person or object. - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 4
Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 1 Do not touch the flash unit with wet hands, as this could cause an electric shock. 2 Keep the flash as this may cause the flash head to overheat and can result in burns and damage to the flash panel and body. WARNINGS - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 5
skin. 7 Always follow the warnings and instructions printed on the batteries to avoid activities that use only batteries specified in this user's manual, to avoid the possibility of batteries leaking flash use, because batteries may generate heat during continuous flash photography. WARNING for TTL - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 6
provides a variety of wireless multiple flash and close-up flash operations. The Speedlight system mainly consists of the Wireless Speedlight Commander SU-800, which controls flash output when mounted on CLS-compatible cameras; the Wireless Remote Speedlight SB-R200, which has a guide number of 10 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 7
is less affected by ambient light (p. 116). • Advanced Wireless Lighting The wireless multiple flash operation in TTL (i-TTL) mode can be accomplished with CLS-compatible cameras. The remote flash units can be divided into three groups and flash output can be independently controlled for each group - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 8
Nikon Creative Lighting System" are abbreviated as "CLS-compatible cameras." • In this manual, the Wireless Speedlight Commander SU-800 is called the "Commander SU-800" or "SU-800" and the Wireless Remote Speedlight SB-R200, the "Remote Speedlight SB-R200" or "SB-R200." Symbols used in this manual - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 9
the R1 Functions and use of the SU-800 Functions and use of the SB-R200 Flash operation using the Nikon Close-up Speedlight Remote Kit R1 (Used with Nikon CLS-compatible cameras 45 Details on close-up flash operation and shooting procedures Functions and use of the SU-800 • SU-800's available - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 10
-Up Positioning Adapter SW-11 103 • Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 105 • Flash shooting with Speedlight Stand AS-20 107 Flash shooting using SLR cameras not compatible with CLS • Overview of close-up flash operation (using cords) ....... 110 • Procedures for - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 11
lenses with limited functions with the SB-R200... 120 • Notes on continuous flash operation (in close-up flash operation (using cords 122 • Optional accessories 123 • Tips on Speedlight care 124 • Notes on batteries 125 • Troubleshooting 126 • Specifications 130 • Index 132 Preparation - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 12
such as weddings and graduations. Have Nikon regularly spot-check your Speedlight Nikon recommends that you have your Speedlight serviced by an authorized dealer or service center at least once every two years. Using your Speedlight correctly The Nikon Speedlight's performance has been optimized for - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 13
remote flash unit(s) to group A when performing wireless multiple flash with a Nikon D70-Series camera's built-in flash as a Commander, otherwise the remote flash unit(s) will not fire. u With SLR cameras incompatible with CLS Use the TTL Cord SC-30 (optional) to connect the SU-800 and the SB-R200 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 14
cameras and lenses v Lenses unusable with the SB-R200 AF NIKKOR lenses with a ring that rotates the lens or camera's autofocus mechanism due to the weight of the flash head. Therefore, do not perform autofocus operation, but use manual focus instead. v Using an AF Micro-Nikkor 60mm f/2.8D lens - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 15
R1C1 should read through this user's manual. Users of the Nikon Close-up Speedlight Remote Kit R1, Commander SU-800 and Remote Speedlight SB-R200 should read the sections necessary for each kit. Products Available flash Usable cameras operations Speedlight and Commander not included in the kit - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 16
ON/OFF WISRPEELEEDSLSIGRHETMOTSEB-R200 IR Panel for Built-in Flash SG-3IR Soft Case SS-SX1 for SX-1 Wireless Remote Speedlight SB-R200 (x2) SW-11 Soft Case SS-R200 for SB-R200 (x2) Extreme Close-Up Positioning Adapter Flexible Arm SW-11 for SB-R200 (x2) Clip SW-C1 AS-20 Speedlight Stand AS-20 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 17
AS-20 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 Attachment Ring SX-1 Adapter Ring Set Extreme Close-Up Positioning Adapter SW-11 for SB-R200 Color Filter Holder SZ-1 Color Filter Set SJ-R200 (for SB-R200 package) Speedlight Stand AS-20 IR Panel for Built-in Flash SG - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 18
parts, their functions, and accessories „ Wireless Speedlight Commander SU-800 13 WIRELESS SPEEDLIGHT COMMANDER SU-800 ON/OFF B A MODE Speedlight is fully recycled and ready to fire. 4 Mounting Foot-lock Lever (p. 29) 5 Terminal Cover 6 TTL Cord Terminal Connects the SU-800 with the SB-R200 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 19
malfunction when carrying the SU-800 in your camera bag, turn off the flash unit. 15 [SEL](FUNC.) button • Press to select the items to activate or cancel the target light. (p. 90) 17 Test Button Press to test fire the flash. (p. 88) 18 [W] (left) Button [X] (right) Button Press to change the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 20
Icons in close-up flash operation Display in TTL mode 1 Wireless Flash A control signal is sent from the SU-800 to the remote flash units such as the SB-R200. 2 Close-up Mode Close-up function is set to "activated." 3 Monitor Preflashes Just before the flash fires, the Speedlight fires a series of - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 21
1 Wireless Flash A control signal is sent from the SU-800 to the remote flash units such as the SB-R200. 2 Commander Mode Commander function is activated. 3 Low Battery-power Replace the battery. 4 Channel Represents the communication channel number through which the Commander and Speedlight - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 22
the SB-R200 is not correctly connected. 9 Flash Output Level Compensation Value (Groups A, B) Indicates the flash output level compensation for groups A and B in the TTL mode. 0 Manual Mode The flash always fires at a specified output in combination with the aperture and light output level (guide - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 23
using the TTL cord. 11 Ready-light The lamp lights up in green when the power is on. It turns red when the SB-R200 is fully recycled and ready to fire. The green lamp blinks when battery power is weak. 12 Battery chamber lid (p. 30) 13 Light sensor window for wireless remote flash 14 Lock - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 24
SB-R200. The Attachment Ring SX-1 can be attached to a tripod (p. 107). Speedlight mounting shoe Tripod socket „ IR Panel for Built-in Flash SG-3IR The SG-3IR can be attached to a camera's hot shoe when a Nikon digital camera's built-in flash -R200 or optional SJ-2) to the flash head of the SB-R200 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 25
-11 „ Soft Case SS-SU800 for SU-800 „ Soft Case SS-SX1 for SX-1 „ Soft Case SS-R200 for SB-R200 SB-R200 AS-20 SZ-1 „ Close-up Speedlight Kit Case SS-MS1 SJ-R200 SS-MS1 WIRELESS SPEEDLIGHT COMMANDER SU-800 SWIPREEELDELISSGHRTEMSOB-TER200 The SC-30 is optional. AS-20 SW-12 Caring for the Close - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 26
manual, the Commander SU-800 and Speedlight mounted on the camera, a built-in flash or the one directly connected to the camera via a TTL Cord is called the Master/Commander flash unit. All other flash units are called remote flash units. Details of Advanced Wireless Lighting Group B (remote flash - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 27
up Speedlight Commander Kit R1C1. • For details on close-up flash operation, see page 65. • For details on Commander flash operation, see page 79. Procedures for close-up flash operation 1 Installing batteries in the SU-800. 2 Attaching the SU-800 to the camera. 3 Installing batteries in the SB-R200 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 28
Procedures for close-up flash operation 1 Installing batteries in the SU-800. 1 Slide open the battery chamber lid in the direction of the arrow. Battery -800's ready-light does not come on within about 30 seconds of turning on the power or after the flash has fired. • Replace the battery. 28 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 29
z Flash operation using the R1C1 2 Attaching the SU-800 to the camera. 1 the camera's accessory shoe and turn the lock lever to the right. v Mounting Foot-lock lever To lock the Speedlight in place, turn the lock lever clockwise approx. 90° until it stops. To unlock, turn the lever counterclockwise - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 30
Procedures for close-up flash operation 3 Installing batteries in the SB-R200. 1 Slide open the battery chamber lid in the lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When the SB-R200's battery power is weak, the green ready-light blinks after the power is turned on or - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 31
z Flash operation using the R1C1 4 Attaching the SB-R200 to the front of the lens. 1 Attach one of the Mounting Buttons on both sides to attach it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 32
-up flash operation 5 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at click stops every 15°. u Using the SB-R200 off-lens Use the provided Speedlight Stand AS-20 to set up the SB-R200 at - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 33
lights up in green when the power is on, then turns red when the SB-R200 is fully recycled. SPWEIERDELLIEGSHST R S ON/OFF 2 Check the indicators on the SU-800's LCD panel. Confirm that Wireless flash, Close-up mode and CLS-compatible camera indicators are all displayed on the LCD panel (p. 20 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 34
the SU-800 to set the flash mode to TTL. Use of TTL mode is recommended for normal flash shooting. AB ON/OFF 2 Confirm the flash settings of the SB-R200. Ensure that both Groups A and B are displayed. • If a Group A or B indicator does not appear, the remote flash unit(s) of this Group will not - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 35
z Flash operation using the R1C1 7 Setting a channel number on the SU-800 and SB-R200. CHANNEL 34 2 1 1 Set a channel number on the SU-800. Press the [SEL](FUNC.) button to display channel number (blinking). Press the [W] or [X] button to change - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 36
Procedures for close-up flash operation 8 Setting a group on the SB-R200. GROUP C B A CHANNEL 34 1 Set a group on each SB-R200. Rotate the [GROUP] select dial on each flash unit to set the group to A or B. Once set, the SB-R200 will operate according to the controls for each group as set on the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 37
v If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the SB-R200 will blink for approx. 3 sec. (The readylights on the SU-800 and in - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 38
Commander function enables the SU-800 to act as a Commander unit to trigger remote flash unit(s) without firing itself. 1 Install the battery in the SU-800 in the same way as No. 1 in "Procedures for close-up flash operation." (p. 28) Battery chamber 2 Set the Commander/Close-up select switch on - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 39
operation using the R1C1 AS-20 2 Setting up the SB-R200. 1 Install the battery in the SB-R200 in the same way as No. 3 in "Procedures for close-up flash operation." (p. 30) LOCK 2 Slide the SB-R200's Mounting Foot into the AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 40
Procedures for Commander flash operation 4 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts down to 60° and up to 45°. The flash head can be set at click stops every 15°. u Attaching the SB-R200 to the front of the lens The SB-R200 can be attached to the front of the lens through - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 41
3 Turning on the camera, the SU-800 and SB-R200. MODE AB ON/OFF SEL READY LOCK 1 Press the [ON/OFF] buttons to turn on the camera, the SU-800 and SB-R200. Ensure that the red ready-lights on the SU-800 and SB-R200 come on. SPWEIERDELLIEGSHST R S ON/OFF z Flash operation using the R1C1 41 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 42
Procedures for Commander flash operation 4 Set the remote flash unit's flash mode on the SU-800. MODE NO AF-ILL AB SEL READY ON/OFF LOCK 1 Press the [SEL](FUNC.) button to display the flash mode (blinking) of each group, then press [MODE] button to set the flash mode to TTL. Use of TTL mode is - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 43
z Flash operation using the R1C1 5 Setting a channel number and a group on the SU-800 and SB-R200. 1 Set a channel number and a group on the SU-800 and SB-R200 in the same way as No. 7 and 8 in "Procedures for close-up flash operation." (pp. 35, 36) 43 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 44
v If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the SB-R200 will blink for approx. 3 sec. (The readylights on the SU-800 and in - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 45
procedures for wireless close-up flash operation with CLS-compatible cameras that feature a Commander function and the Nikon Close-up Speedlight Remote Kit R1. • For details on close-up flash operation, see page 65. 1 Installing batteries in the SB-R200. 2 Attaching the SB-R200 to the front - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 46
battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When battery power is weak, the SB-R200's green ready-light blinks when the power is turned on or after the flash has fired. • Replace the battery. 46 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 47
z Flash operation using the R1 2 Attaching the SB-R200 to the front of the lens. 1 Attach one of the -1's Mounting Buttons on both sides to attach it to the Adapter Ring, then release. • Make sure that the Nikon logo (p. 24) on the SX-1 is on the under side facing down. • Use fingers of both hands - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 48
the R1 5 Adjust the SB-R200's flash head. The flash head of the SB-R200 tilts 60° toward the optical axis and 45° in the opposite direction. The flash head can be set at a click stop every 15°. u Using the SB-R200 off-lens Use the provided AS-20 Speedlight Stand to set up the SB-R200 at any location - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 49
3 Turning on the camera and SB-R200. SPWEIERDELLIEGSHST R S ON/OFF 1 Press the [ON/OFF] buttons to turn on the camera and SB-R200. Ensure that the red ready-lights on the camera and SB-R200 come on. z Flash operation using the R1 49 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 50
Commander function on the camera and flash mode on the SB-R200. • Be sure to read the user's manual of the camera in use. u Notes on using camera's built-in flash in Commander mode Camera Available flash mode of built-in flash D800-Series, TTL, M, -- (Flash canceled) D700, D300Series, D200, D90 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 51
5 Setting a channel and group number on the SB-R200. CHANNEL 34 2 1 1 Rotate the [CHANNEL] select dial on the SB-R200 to set the channel number. • Set the channel number of the SB-R200 to 3 when using a Nikon D70-Series digital camera, otherwise the flash will not fire. GROUP C B A CHANNEL 34 2 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 52
release the shutter. • For details on test firing, refer to page 88. v If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 53
Functions and use of the SU-800 This section describes the functions and use of the SU-800. 1 SU-800's available flash operations 2 Using the SU-800 3 Functions of the SU-800 53 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 54
on each flash operation. Available flash operation Usable cameras Usable Speedlights Close-up (p. 65) CLS-compatible cameras SB-R200 Cameras not compatible with CLS*1 Commander (p. 79) CLS-compatible cameras SB-R200, SB-910*2, SB-900*2, SB-800*2, SB-700*2, SB-600*2 *1 The optional TTL Cord - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 55
indicator blinks when the SU-800's ready-light does not come on within about 30 seconds of the power being turned on or after the flash has fired. • Replace the battery. 3 Turn off the camera and SU-800. ON/OFF 55 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 56
-800 to turn on the power. • Ensure that the ready-light on the SU-800 comes on. 6 Confirm the SU-800's LCD panel. Ensure that Wireless flash, Close-up mode and CLS-compatible camera indicators are correctly displayed. 56 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 57
use of the SU-800 The SU-800's auto power-off function and camera's exposure meter-off function With a camera body that is compatible with TTL auto flash, the SU-800 goes into standby mode when the camera's exposure meter turns off. Without a camera body, if the SU-800 is not being - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 58
(p. 79) • Flash mode of remote flash unit(s) (TTL, Auto Aperture flash (AA), M, --- (flash canceled), RPT (Repeating) flash) • Group name (A, B, C) • Flash output-level compensation value (in TTL and Auto Aperture flash (AA) modes) • Manual flash output level (in M mode) • Manual flash output level - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 59
Functions and use of the SB-R200 This section describes the functions and use of the SB-R200. 1 SB-R200's available flash operations 2 Using the SB-R200 3 Functions of the SB-R200 59 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 60
1 SB-R200's available flash operations The following flash operations are available with the SB-R200. Refer to the corresponding pages for details on each flash operation. Available flash operation Usable cameras and Speedlights Close-up (p. 65) CLS-compatible cameras, cameras not compatible - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 61
weak, the green ready-light blinks after the power has been turned on or after the flash has fired • Replace the battery. LOCK 3 Slide the SB-R200's Mounting Foot into the Speedlight Stand AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting Foot cannot be inserted in reverse - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 62
your Speedlight or camera's user's manual. • Be sure to place all SB-R200 units that are set in the same group close together. • For notes on setting up the SB-R200, see "Setting up the SB-R200" on page 108. Group A 3m (9.8 ft) With the SU-800 5 Adjust the SB-R200's flash head. The flash head of - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 63
SPWEIERDELLIEGSHST R S ON/OFF 6 Press the [ON/OFF] button on the camera, or the SB-910, SB-900, SB-800, SU-800 and SB-R200 to turn on the power. Ensure that the red ready-light on the camera, the SB-910, SB-900, SB-800, SU-800 or on the SB-R200 comes on. z Functions and use of the SB-R200 63 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 64
WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF 3 Functions of the SB-R200 The following functions can be set on the SB-R200. Switching the Target Light (focus assist lamp) on or off Use the Target Light button to illuminate or cancel the Target Light (p. 90). Items to - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 65
This section describes in detail wireless close-up flash operation and shooting procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that provides example photos. Be sure to read your camera user's manual for specific information on camera - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 66
8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) A-2, A-3, and A-4 examples in "Close-up Speedlight Photography Examples" were also taken under the same conditions as with A-1. Flash setup SU-800 Group A SB-R200 Group B SB-R200 Dual-light close-up flash operation (one flash unit attached to - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 67
Example E • Camera: D70 • Lens: AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED • Group A: SB-R200 (TTL) Example F E-3 Dual-light close-up flash operation (one flash unit attached to the front of the lens + one remote unit bounced off the wall) This picture was taken as an example of how to show cloth - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 68
Set up the SU-800 and SB-R200 in the same way as "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). Items to be set The following items can be set in the close-up flash operation. • Flash mode (TTL, M) • Group name (A, B, C) • Flash firing/canceling for groups A and - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 69
, depending on cameras and lenses in use. • The same flash mode is set for both Groups A and B. • In triple-light close-up flash operation, the TTL and M (manual) flash modes are available for Groups A and B. For Group C, only the M (manual) flash mode is available. Display in dual-light close-up - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 70
SU-800. Press the [MODE] button to set the flash mode to TTL or M (manual). • "TTL" is preset when shipped from the factory. • The same flash mode is set for both Groups A and B. MODE NO AF-ILL AB ON/OFF AB ON/OFF SEL READY LOCK 4 Setting the SB-R200 to fire or cancel. Press the [A B] select - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 71
. The last value to blink is the one that has been set automatically. 6 Setting the SB-R200's flash output level compensation value (in TTL mode). Press the [SEL](FUNC.) button to display the flash output level compensation value (blinking). Press the [W] or [X] button to increase or decrease the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 72
E AB L SEL READY LOC 9 Setting a group on the SB-R200. Rotate the [GROUP] select dial on the SB-R200 to set the group. Once set, the SB-R200 operates according to the controls as set on the SU-800. 10 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 73
the TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red ready-light on the SB-R200 blinks [X] button continuously increases or decreases the value quickly. • Manual flash output level blinks during adjustment and stops after blinking six times - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 74
-800. Press the [MODE] button to set the flash mode to TTL or M (manual). • "TTL" is preset when shipped from the factory. • The same flash mode is set for both Groups A and B. • Only the M (manual) flash mode is available for Group C. 4 Setting the SB-R200 to fire or cancel. Press the [A B] select - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 75
. The last value to blink is the one that has been set automatically. 6 Setting the SB-R200's flash output level compensation value (in TTL mode). Press the [SEL](FUNC.) button to display the flash output level compensation value (blinking). Press the [W] or [X] button to increase or decrease the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 76
one that has been set automatically. • Manual flash output level can be set separately for each group. • The flash output level can be set from M1/1 to the SU-800. Set the communication channel numbers of the SU-800 and SB-R200. Press the [SEL](FUNC.) button to display the channel number (blinking). - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 77
If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In the TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red ready-light on the SB-R200 blinks for approx. 3 sec. (The ready-lights on the SU-800 and in - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 78
78 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 79
(Used with CLS-compatible cameras) This section describes the details of available wireless Commander flash operation and necessary procedures with CLS-compatible cameras. Also read "Close-up Speedlight Photography Examples," a separate booklet that contains example photos. Be sure to refer - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 80
5G IF-ED • Group A: SB-800 (TTL) • Group B: SB-R200 (TTL) • Group C: SB-R200 (M) D-2 example in "Close-up Speedlight Photography Examples" was taken using a single built-in flash. Flash setup SB-R200 Group C SU-800 SB-R200 Group B Triple-light flash operation Two SB-R200 units on the right and - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 81
contours and brightens the backgrounds. SB-R200 Group A SB-R200 Group B • Camera: D70 • Lens: AF Micro-Nikkor 105mm f/2.8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) • Group C: SB-R200 (M) G-2 example in "Close-up Speedlight Photography Examples" was taken using flash units in Groups A and - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 82
with Commander function • Speedlight SB-910, SB-900, SB-800 Flash units usable as a remote flash unit • Wireless Remote Speedlight SB-R200 • Speedlight SB-910, SB-900, SB-800, SB-700, SB-600 v SB-910, SB-900 or SB-800 Commander mode In the Commander mode, although the SB-910, SB-900 or SB-800 is set - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 83
the SU-800 for remote flash units Flash mode TTL Auto Aperture flash (AA)*1 M --- (canceled) SB-R200 O X O O SB-910/SB-900/SB-800 SB-700/SB-600 O O O X O O O O *1 Auto Aperture flash mode is possible only when the SB-910, SB-900 or SB-800 is used as a remote flash unit in combination - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 84
1 Press the [ON/OFF] buttons to turn on the camera, the Commander and remote flash units. • Ensure that the red ready-lights come on and the flash units have been fully recycled. • Ensure that Wireless flash, Commander mode and CLS-compatible camera indicators are all displayed on the LCD panel - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 85
number of the remote flash unit(s) to 3 when using a Nikon D70-Series camera, otherwise the remote flash unit(s) will not fire. • With the SB-R200, rotate the [CHANNEL] select dial to set the channel number. • With the SB-910, SB-900, SB-800, SB-700 or SB-600, read the user's manual for each model - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 86
Speedlight SB-910, SB-900, SB-800, SB-700 or SB-600 is used as a remote flash unit, the red ready-light on the Speedlight in use blinks for 3 sec. after firing. The amount of underexposure is displayed. (For more details, read your Speedlight user's manual.) u In the M (manual) mode, set manual - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 87
on each function of the SU-800 and SB-R200. Be sure to refer to your camera user's manual for specific information on camera settings and ) 4 Autofocus flash operation in low light 5 Flash output level compensation 6 Repeating (RPT) flash operation 7 Auto FP High-Speed Sync 8 Flash Value Lock - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 88
operation When the [Test] button on the SU-800 is pressed, the SB-R200 in Group A fires in one second, followed by the flash unit in Group B in two seconds at an M1/64 flash output level. • Flash unit(s) in Group A or B of which flash firing is set to "canceled" also fire. In triple-light close - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 89
goes off. • The SB-R200 in a group of which flash firing is set to "canceled" does not fire. In the Commander mode SEL READY LOCK Firing by the SU-800 When the Target Light button on the SU-800 is pressed and released within 1 second, the Modeling Illuminators of remote flash units in the groups - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 90
3 Using the Target Light (Focus-assist Illuminator) By using the Target Light on the SB-R200, you can confirm the direction of flash light emitted. Illuminating and canceling the Target Light using the Target Light button on the SU-800 SEL READY LOCK Press and hold the Target - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 91
Illuminator does not work in close-up flash operation. • The SU-800's AF-Assist Illuminator supports CLS-compatible cameras' Multi-Area Autofocus in the camera's viewfinder even through the AF-Assist Illuminator is on, focus manually. • The AF-Assist Illuminator will not light up if the camera's - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 92
the flash output level compensation As a basic guide, some plus compensation may be necessary to make the main subject brighter. Likewise, some minus compensation may be required to make the main subject darker. In TTL auto and Auto Aperture flash operations (with the SB-910, SB-900 or SB-800 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 93
B, and C), independently for each group. • Be sure to read the user's manual of the Speedlight in use. Usable Speedlight SB-910, SB-900, SB-800, SB-700, SB-600 Notes on Repeating flash operation • The SB-R200 cannot be used. • Setting the flash units in group A or B to fire or cancel is not possible - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 94
A, B and C. Setting a group and a channel number on the Speedlight Display when using the SB-800 Set the same channel number as set on the SU-800. • Refer to your Speedlight user's manual for specific information on settings. Setting the flash mode on each group Firing Firing canceled Press the [SEL - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 95
increases or the number of flashes per second decreases because the Speedlight fires during a single exposure. • The maximum number of repeating flashes per frame varies depending on the frequency and flash output level. For more details, refer to your Speedlight user's manual. 95 z Other functions - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 96
achieve shallow depth of field to blur the background. • Available flash modes are i-TTL, Auto Aperture flash, and Manual flash. Usable flash shooting distance ranges in Auto FP High-Speed Sync using the SB-R200 (in TTL mode) (m/ft) ISO 25 Aperture f/1.4 0.6-2.3/2.0-7.5 50 0.6-3.3/2.0-11 100 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 97
Auto FP High-Speed Sync in Manual flash mode, the SB-R200's flash output level may be extremely low when the manual flash output level is set to a low value. However, this is not a malfunction. Flash output level may also vary depending on the subject matter conditions. Guide number in Auto FP High - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 98
Lock function on the SU-800 or SB-R200 directly. Set it on the camera. Flash Value, or "FV," is the amount of flash exposure for the subject. Using FV Lock with compatible cameras, you can lock in the appropriate flash exposure for the main subject. This flash exposure remains locked in, even if you - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 99
user's manual for specific information on camera settings and functions. 1 Flash shooting with colored gel filters 2 Flash shooting with the Extreme Close-Up Positioning Adapter SW-11 3 Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 4 Flash shooting with Speedlight Stand AS - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 100
: D70 • Lens: AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED • Group A: SB-800 (TTL) • Group B: SB-600 (TTL) • Group C: SB-R200 (M) I-3 example in "Close-up Speedlight Photography Examples" was taken in dual-light flash operation with two different colored gel filters. I-2 was taken using triple-light - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 101
Speedlight. Choose an appropriate white balance setting on your digital camera. For more details, see your camera user's manual repeating flash, as the heat can damage them. • The heat generated from the flash head can printed on each filter is provided as a guide only. Be sure to make test shots to - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 102
Insert the colored gel filter in the Color Filter Holder SZ-1. 2 Attach the SZ-1 to the SB-R200. WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF White bal. Auto Incandescent Fluorescent Dir. sunlight Flash 3 Adjust the white balance setting on your digital camera, then shoot. • For details on test firing - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 103
8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) G-5 example in "Close-up Speedlight Photography Examples" was taken without using the SW-11. Using the Extreme Close-Up Positioning Adapter SW-11 1 Attach the Color Filter Holder SZ-1 to the SB-R200's flash head. z Flash operation using various - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 104
with the Extreme Close-Up Positioning Adapter SW-11 3 Tilt the SB-R200's flash head down 60° toward the optical axis. 0˚ 60˚ u Using the Extreme Close-Up Positioning Adapter SW-11 effectively Use the SW-11 when taking flash pictures at close distance for more effective results. Be sure to tilt - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 105
freshness of the cake as compared with flash operation without using the Diffuser SW-12. Example E E-1 Group A SB-R200 • Camera: D70 • Lens: AF Micro-Nikkor 60mm f/2.8D • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) C-4 example in "Close-up Speedlight Photography Examples" was taken under the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 106
3 Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1 Attachment of the Flexible Arm Clip SW-C1 to the SX-1 1 Align one - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 107
5G IF-ED • Group A: SB-R200 (TTL) • Group B: SB-R200 (TTL) H-4 example in "Close-up Speedlight Photography Examples" was taken using a single built-in flash. Attachment of the SB-R200 to the AS-20 1 Slide the SB-R200's mounting foot into the AS-20's Speedlight mounting shoe and slide the Lock - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 108
(such as a camera or Speedlight) in use. Refer to the user's manual of each product. • Be sure to place all SB-R200 units that are set in the same group close together. • Take care not to let light from the SB-R200 enter the camera lens directly or indirectly in TTL auto flash mode. Otherwise, the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 109
Flash shooting using SLR cameras not compatible with CLS Use the TTL Cord SC-30 (optional) to connect the SU-800 to the SB-R200 with SLR cameras not compatible with CLS. 1 Overview of close-up flash operation (using cords) 2 Procedures for close-up flash operation (using cords) 109 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 110
-800 and SB-R200. Set up the SU-800 and SB-R200 in the same way as described in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). • The same set-up is applicable when using the Speedlight Stand AS-20. 2 Connect the flash units using cords. Use the optional TTL Cord SC - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 111
for groups A and B. Display in TTL BL flash mode Display in TTL flash mode Display in M (manual) flash mode Items to be set in close-up flash operation (using cords) The following items can be set in close-up flash operation. • Flash mode (TTL BL, TTL, M) • Flash firing/canceling for group A or - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 112
the [MODE] button on the SU-800 to set the flash mode to TTL BL, TTL or M. LO 3 Activating or canceling the SB-R200's flash firing Press the [A B] select button to set the remote flash units in Group A or B to fire or to cancel. • A remote flash unit on the left as viewed from the SU-800's LCD - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 113
units. Press the [Test] button on the SU-800 to test fire the SB-R200. • Flash units fire at an M1/64 flash output in the TTL and at a specified output in the M (manual) mode. E AB L SEL READY LOC 6 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 114
(using cords) SEL READY LOCK Press the Target Light button on the SU-800 and release within one second and the SB-R200's flash fires repeatedly at a reduced flash output level. This is useful for checking the illumination and the shadows cast on the subject before actually taking the picture - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 115
This section covers available flash modes, troubleshooting, Speedlight care, Specifications, and optional accessories. 1 Available flash modes 2 Usable lenses with limited functions with the SB-R200 3 Notes on continuous flash operation 4 Optional accessories 5 Tips on Speedlight care 6 Notes on - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 116
. This is useful when you want to highlight the main subject or make exposure compensation. About the flash shooting distance range in the TTL auto flash mode When the SB-R200 is used as a remote flash unit, the flash shooting distance range is 0.6m to 28m (2 to 92 ft) and varies depending on ISO - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 117
reproduction ratio, refer to applicable aperture at 1:1 or 1:3. • When the Extreme Close-Up Positioning Adapter SW-11 is used with the SB-R200, the flash light amount varies depending on reproduction ratios (increases when the shooting distance is approx. 15cm (5.9 in.) or less). Making test shots - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 118
(m/ft) • Set the same aperture for both the SU-800 and the camera or lens. Guide number of the SB-R200 is 10/33 (ISO 100, m/ft) ISO sensitivity factors For sensitivities other than ISO 100, multiply the guide number by the factors shown in the table below. ISO 25 50 100 200 400 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 119
of the lens. • Auto Aperture flash is available only when the SB-910, SB-900 or SB-800 is used as a remote flash unit. (A warning indicator appears if the SB-R200, SB-700 or SB-600 receives an Auto Aperture flash mode signal.) • If the flash mode is set to Auto Aperture flash while a non-CPU lens is - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 120
2 Usable lenses with limited functions with the SB-R200 Maximum number of SB-R200 units to be attached to the front of the lens AF -1-72 SY-1-62 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 SY-1-77 Max. number of flash units Up to 2 Up to 4 Up to 2 Up to 2 Up to 4 Up to 4 Up to 4 Up - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 121
Manual -1-52 SY-1-52 SY-1-72 SY-1-52 SY-1-72 SY-1-52 Max. number of flash units Up to 2 Up to 2 Up to 2 Up to 4 Up to Lens Nikon DX format digital SLR cameras 35mm (135) format Nikon film-SLR cameras and Nikon FX When using the SB-R200 attached to the lens Be careful not to knock and damage the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 122
of continuous firings, as this may cause the flash head to overheat and can result in burns and damage to the flash panel and body. Max. number of continuous firings Flash mode TTL auto flash Manual flash (Flash output level: M1/1, M1/2) Manual flash (Flash output level: M1/4 to M1/64) Max. number - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 123
SC-30 Close-up flash operation (using cords) is possible in the TTL mode with the optional TTL Cord SC-30 to connect the SU-800 and the SB-R200. Color Filter Set SJ gradual deterioration in color due to the heat generated by the flash firing. Therefore, it is recommended to check and replace these - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 124
may also impair your health. Cleaning • Use a blower brush to remove dirt and dust from the Speedlight and clean it with a soft, clean cloth. After using the Speedlight near saltwater, wipe the flash unit with a soft, clean cloth moistened slightly with tap water to remove the salt, then dry it - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 125
If exhausted batteries are used at low temperatures, the Commander or Speedlight units may not work properly. • When taking photographs in low being turned on or after the flash has fired. • Replace the battery. SPWEIERDELLIEGSHST R S ON/OFF When the SB-R200's battery power is weak, the - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 126
's LCD panel, use the following items to determine the cause of the problem before taking your Speedlight to a Nikon service center for repair. Warning indications in the Commander SU-800 and the Remote Speedlight SB-R200 In the close-up mode Using cords warning With CLS-compatible cameras, if - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 127
, the SU-800 and SB-R200 will not work if these units are connected using cords. Warning indicators will appear. Incompatible camera warning The SU-800 cannot be used with COOLPIX-Series cameras other than COOLPIX P7100, P7000 and P6000. If used, the Wireless flash indicator blinks as a warning - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 128
7 Troubleshooting Flash malfunction warning While the SB-R200 is used as a wireless remote flash unit, the red ready-light rapidly blinks four times and stops for 0.5 sec. This cycle is repeated six times if the flash unit receives a signal such as Non-TTL auto flash or Repeating flash. Problems - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 129
viewfinder Problem The ready-light inside camera's viewfinder blinks when the SU-800 is mounted on cameras not compatible with CLS and the flash mode is set to TTL in close-up flash operation (using cords). Solution Set the flash mode to M (manual). A note on microcomputer-controlled Speedlights - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 130
Wireless Speedlight Commander SU-800 Transmission mode Transmission range No. of channels No. of groups No. of transmissions Transmission interval Flash light wavelength Flash using a flash discharge tube Approx. 20m (66 ft) for SB-910/SB-900/SB-800/SB-700/SB-600 Approx. 4m (13 ft) for SB-R200 at - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 131
Wireless Remote Speedlight SB-R200 Electronic construction Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash unit only) Guide number 10/33 (ISO 100, m/ft), 14/46 (ISO 200, m/ft) Angle of coverage Covering light distribution of 24mm lens; 60° ( - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 132
24, 103 Extreme Close-Up Positioning Adapter for SB-R200 24, 103 F FV Lock flash 98 Flash head 23 Flash mode 116 Flash output level 95 Flash output level compensation 92 Flash output level compensation value 20 Flash output level ratio 20 Flash shooting distance range 116 Flexible Arm Clip - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 133
Nikon Close-up Speedlight Remote Kit R1 15 Nikon Creative Lighting System (CLS)....... 7 Number of flashes 95 R R1 15 R1C1 15 Ready-light 18, 23 Recommended cameras 13 Recommended lenses 13 Remote flash unit 26, 82 Remote Speedlight 23 Repeating flash 93 Replace the battery 125 S SB-R200 - Nikon SB-R200 Wireless Speedlight | Users Manual - English - Page 134
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Printed in Europe TT2I10(11) 8MSA2211-10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
 |
 |
En
User’s Manual
R1C1
R1
Nikon Close-up Speedlight Commander Kit
Nikon Close-up Speedlight Remote Kit
SU-800
SB-R200
Wireless Speedlight Commander
Wireless Remote Speedlight