Nikon Z 50 Reference Manual
Nikon Z 50 Manual
 |
View all Nikon Z 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Nikon Z 50 manual content summary:
- Nikon Z 50 | Reference Manual - Page 1
DIGITAL CAMERA Reference Manual • Read this manual thoroughly before using the camera. • To ensure proper use of the camera, be sure to read "For Your Safety" (page xxxv). • After reading this manual, keep it in a readily accessible En place for future reference. - Nikon Z 50 | Reference Manual - Page 2
64GB When Your First Photo Can't Wait ❚❚ Getting Ready 1 Insert the battery (043). For information on charging the battery, see "Charging the Battery" (0 38). 2 Insert a memory card (045). 3 Attach a lens (050). • Align the white dot on the lens with the white dot on the camera body (q) and rotate - Nikon Z 50 | Reference Manual - Page 3
❚❚ Take (056) and View (069) Pictures 1 Rotate the mode dial to b. 2 To focus, press the shutter- release button halfway (i.e, lightly press the shutterrelease button, stopping when it is pressed halfway). 3 Without lifting your finger from the shutter-release button, press the button the rest of - Nikon Z 50 | Reference Manual - Page 4
; supplied with a plug adapter attached in countries or regions where required; shape depends on country of sale- 040) ❏ AN-DC19 strap (037) ❏ Warranty ❏ User's Manual ❏ UC-E24 USB cable (0492, 599) ❏ BS-1 accessory shoe cover (0 709) • Memory cards are sold separately. iv Package Contents - Nikon Z 50 | Reference Manual - Page 5
D The Nikon Download Center Visit the Nikon download center to download firmware updates, ViewNX-i and other Nikon software, and manuals for Nikon products including cameras, NIKKOR lenses, and flash units. https://downloadcenter.nikonimglib.com/ Package Contents v - Nikon Z 50 | Reference Manual - Page 6
icon marks tips, additional information you may find helpful when using this product. 0 This icon marks references to other sections in this manual. ❚❚ Conventions • This manual is for use with both the Z 7II and Z 6II. The illustrations show the Z 6II. • This camera uses CFexpress (Type B), XQD, SD - Nikon Z 50 | Reference Manual - Page 7
AFor Your Safety "For Your Safety" contains important safety instructions. Be sure to read them before using the camera. For more information, see "For Your Safety" (0xxxv). About This Manual vii - Nikon Z 50 | Reference Manual - Page 8
Table of Contents When Your First Photo Can't Wait ii Package Contents iv About This Manual vi Menu List xxviii For Your Safety xxxv Notices...xl Getting to Know the Camera 1 Parts of the Camera 1 Camera Body 1 The Control Panel 6 The - Nikon Z 50 | Reference Manual - Page 9
Photos 69 Viewing Movies 70 Deleting Unwanted Pictures 72 Basic Settings 74 Focus ...74 Focus Mode 74 AF-Area Mode 77 The Touch Shutter 88 Manual Focus 91 Table of Contents ix - Nikon Z 50 | Reference Manual - Page 10
Controls 106 The Mode Dial 106 Using the Mode Dial 106 P (Programmed Auto 107 S (Shutter-Priority Auto 108 A (Aperture-Priority Auto 108 M (Manual 109 U1, U2, and U3 (User Settings Modes 115 The S Button 118 Adjusting ISO Sensitivity 118 Auto ISO Sensitivity Control 120 The E (Exposure - Nikon Z 50 | Reference Manual - Page 11
The i Menu 136 The i Menu 136 Still Images 138 Set Picture Control 139 White Balance 145 Image Quality 152 Image Size 154 Flash Mode 156 Metering 157 Wi-Fi Connection 158 View Memory Card Info 159 Release Mode 160 Vibration Reduction 161 AF-Area Mode 163 Focus Mode 164 Movies...165 - Nikon Z 50 | Reference Manual - Page 12
Playback 180 Viewing Pictures 180 Full-Frame Playback 180 Thumbnail Playback 181 Photo Information 183 File Information 184 Exposure Data 185 Highlight Display 185 RGB Histogram 186 Shooting Data 188 Location Data 191 Overview 191 The i Button (Playback Mode 193 Photos 193 Movies 196 - Nikon Z 50 | Reference Manual - Page 13
Menu Guide 212 Defaults 212 Playback Menu Defaults 212 Photo Shooting Menu Defaults 213 Movie Shooting Menu Defaults 217 Custom Settings Menu Defaults 219 Setup Menu Defaults - Nikon Z 50 | Reference Manual - Page 14
Settings 265 White Balance 267 The White Balance Menu: Fine-Tuning 267 The White Balance Menu: Choosing a Color Temperature 270 Preset Manual: Copying White Balance from a Photograph 272 Set Picture Control 275 Modifying Picture Controls from the Menus..... 275 Manage Picture Control 278 - Nikon Z 50 | Reference Manual - Page 15
Flicker Reduction Shooting 289 Metering 290 Flash Control 291 Flash Control Mode 292 Wireless Flash Options 293 Remote Flash Control 294 Radio Remote Flash Info 294 Flash Mode 295 Flash Compensation 295 Focus Mode 295 AF-Area Mode 296 Vibration Reduction 296 Auto Bracketing 297 Exposure - Nikon Z 50 | Reference Manual - Page 16
1 The Movie Shooting Menu: Movie Shooting Options..... 363 Reset Movie Shooting Menu 364 File Naming 364 Destination 364 Choose Image Area 365 Frame Size/Frame Rate 365 Movie Quality 365 Movie File Type 365 ISO Sensitivity Settings 366 White Balance 367 Set Picture Control 367 Manage - Nikon Z 50 | Reference Manual - Page 17
a8: Focus Point Wrap-Around 387 a9: Focus Point Options 388 Manual Focus Mode 388 Dynamic-Area AF Assist 388 a10: Low-Light AF 389 a11: Built -in AF-Assist Illuminator 390 a12: Manual Focus Ring in AF Mode 391 b: Metering/Exposure 392 b1: EV Steps for - Nikon Z 50 | Reference Manual - Page 18
c: Timers/AE Lock 394 c1: Shutter-Release Button AE-L 394 c2: Self-Timer 394 c3: Power Off Delay 395 d: Shooting/Display 396 d1: CL Mode Shooting Speed 396 d2: Max. Continuous Release 396 d3: Sync. Release Mode Options 397 d4: Exposure Delay Mode 397 d5: Shutter Type 398 d6: Extended - Nikon Z 50 | Reference Manual - Page 19
f: Controls 410 f1: Customize i Menu 410 View Memory Card Info 411 Split-Screen Display Zoom 412 Bluetooth Connection 413 MB-N11 Info 413 f2: Custom Controls 414 f3: OK Button 427 Shooting Mode 427 Playback Mode 428 f4: Shutter Spd & Aperture Lock 429 f5: Customize Command Dials 430 - Nikon Z 50 | Reference Manual - Page 20
g: Movie 440 g1: Customize i Menu 440 g2: Custom Controls 441 g3: OK Button 448 g4: AF Speed 449 g5: AF Tracking Sensitivity 449 g6: Highlight Display 450 Display Pattern 450 Highlight Display Threshold 450 g7: Assign MB-N11 Buttons 451 Same as Camera AF-ON Button 452 B The Setup Menu: - Nikon Z 50 | Reference Manual - Page 21
Non-CPU Lens Data 466 Save Focus Position 466 Clean Image Sensor 467 Image Dust Off Ref Photo 468 Acquiring Image Dust Off Reference Data ......... 468 Pixel Mapping 471 Image Comment 473 Input Comment 473 Attach Comment 473 Copyright Information 474 Artist/Copyright 474 Attach Copyright - Nikon Z 50 | Reference Manual - Page 22
Connect to Smart Device 483 Pairing (Bluetooth 483 Select to Send (Bluetooth 484 Wi-Fi Connection 484 Send While Off 485 Location Data (Smart Device 485 Connect to PC 486 Wi-Fi Connection 486 Network Settings 486 Options 488 MAC Address 489 Wireless Transmitter (WT-7 490 Wireless - Nikon Z 50 | Reference Manual - Page 23
Resize 512 Resizing Multiple Images 512 D-Lighting 517 Red-Eye Correction 518 Straighten 519 Distortion Control 520 Perspective Control 521 Monochrome 522 Image Overlay 523 Add 523 Lighten and Darken 528 Trim Movie 532 O My Menu/m Recent Settings 533 O My Menu: Creating a Custom Menu - Nikon Z 50 | Reference Manual - Page 24
Connecting to Networks Using the WT-7 594 The WT-7 594 What the WT-7 Can Do for You 595 Connecting Using the WT-7 597 Troubleshooting 598 Cabled Connections to Computers and HDMI Devices 599 Connecting to Computers Via USB 599 Installing ViewNX-i 600 Copying Pictures to a Computer Using - Nikon Z 50 | Reference Manual - Page 25
SB-500 646 Optical/Radio AWL 656 Flash Info for Remote Units 657 Flash Control Mode Displays 657 Troubleshooting 660 Before Contacting Customer Support 660 Problems and Solutions 662 Battery/Display 662 Shooting 663 Playback 669 Bluetooth and Wi-Fi (Wireless Networks 671 Miscellaneous - Nikon Z 50 | Reference Manual - Page 26
710 Attaching a Power Connector and AC Adapter 733 Software 735 Caring for the Camera 737 Storage 737 Cleaning 738 Image Sensor Cleaning 739 Manual Cleaning 741 Caring for the Camera and Battery: Cautions 743 Camera Care 743 Battery Care 747 Using the Charger 750 Using the Charging AC - Nikon Z 50 | Reference Manual - Page 27
777 AF-Assist Illumination 780 Trademarks and Licenses 781 Notices...785 Bluetooth and Wi-Fi (Wireless LAN 788 Kit Lens Manual 794 NIKKOR Z 24-70mm f/4 S Lens Manual 794 Using the Lens 794 Precautions for Use 799 Lens Care 800 Accessories 801 Specifications 802 Index 803 Table of - Nikon Z 50 | Reference Manual - Page 28
Menu List The camera offers the following menus. For a more complete description of individual menu items, refer to the "Menu Guide" chapter in the Online Manual. PLAYBACK MENU Delete Playback folder Playback display options Dual-format recording PB slot Image review After delete After burst, show - Nikon Z 50 | Reference Manual - Page 29
PHOTO SHOOTING MENU Diffraction compensation Auto distortion control Flicker reduction shooting Metering Flash control Flash mode Flash compensation Focus mode AF-area mode Vibration reduction Auto bracketing Multiple exposure HDR (high dynamic range) Interval timer shooting Time-lapse movie Focus - Nikon Z 50 | Reference Manual - Page 30
Limit AF-area mode selection a8 Focus point wrap-around a9 Focus point options a10 Low-light AF a11 Built-in AF-assist illuminator a12 Manual focus ring in AF mode xxx Menu List - Nikon Z 50 | Reference Manual - Page 31
CUSTOM SETTING MENU b Metering/exposure b1 EV steps for exposure cntrl b2 Easy exposure compensation b3 Center-weighted area b4 Fine-tune optimal exposure c Timers/AE lock c1 Shutter-release button AE-L c2 Self-timer c3 Power off delay CUSTOM SETTING MENU d Shooting/display d1 CL mode - Nikon Z 50 | Reference Manual - Page 32
CUSTOM SETTING MENU e Bracketing/flash e1 Flash sync speed e2 Flash shutter speed e3 Exposure comp. for flash e4 Auto c ISO sensitivity control e5 Modeling flash e6 Auto bracketing (mode M) e7 Bracketing order CUSTOM SETTING MENU f Controls f1 Customize i menu f2 Custom controls f3 OK - Nikon Z 50 | Reference Manual - Page 33
SETUP MENU Format memory card Save user settings Reset user settings Language Time zone and date Monitor brightness Monitor color balance Viewfinder brightness Viewfinder color balance Control panel brightness Limit monitor mode selection Information display AF fine-tuning options Non-CPU lens data - Nikon Z 50 | Reference Manual - Page 34
RETOUCH MENU NEF (RAW) processing Trim Resize D-Lighting Red-eye correction Straighten Distortion control Perspective control Monochrome Image overlay Trim movie MY MENU Add items Remove items Rank items Choose tab xxxiv Menu List - Nikon Z 50 | Reference Manual - Page 35
damage to property or injury to yourself or to others, read "For Your Safety" in its entirety before using this product. Keep these safety instructions where all those who use this product will read them. A DANGER: Failure to observe the precautions marked with this icon carries a high risk of - Nikon Z 50 | Reference Manual - Page 36
Do not let your skin remain in prolonged contact with this product while it is on or plugged in. Failure to observe this precaution could result in low-temperature burns. Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this - Nikon Z 50 | Reference Manual - Page 37
Do not handle the plug when charging the product or using the AC adapter during thunderstorms. Failure to observe this precaution could result in electric shock. Do not handle with bare hands in locations exposed to extremely high or low temperatures. Failure to observe this precaution could result - Nikon Z 50 | Reference Manual - Page 38
Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction. Do not look directly at the AF-assist illuminator. Failure - Nikon Z 50 | Reference Manual - Page 39
eyes, rinse with plenty of clean water and seek immediate medical attention. Delaying action could result in eye injuries. Follow the instructions of airline personnel. Batteries left unattended at high altitudes in an unpressurized environment may leak, overheat, rupture, or catch fire. A WARNING - Nikon Z 50 | Reference Manual - Page 40
held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your - Nikon Z 50 | Reference Manual - Page 41
• Cautions on certain copies and reproductions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided - Nikon Z 50 | Reference Manual - Page 42
of Nikon's "Life-Long Learning" commitment to ongoing product support and education, continually-updated information is available on-line at https://www.nikonusa.com/ • For users in Europe: https://www.europe-nikon.com/support/ • For users in Asia, Oceania, the Middle East, and Africa: https://www - Nikon Z 50 | Reference Manual - Page 43
Getting to Know the Camera Parts of the Camera Camera Body 5 12 3 4 6 7 8 9 10 11 9 14 1 Mode dial (015, 106) 2 Mode dial lock release (015, 106) 3 Stereo microphone (063) 4 Movie-record button (063) 5 Power switch (052, 56) 6 Shutter-release button (056) 7 E button (018, 122) - Nikon Z 50 | Reference Manual - Page 44
1 2 3 7 8 9 4 10 5 11 6 12 13 1 Image sensor (0739) 6 Lens mounting mark (050) 2 M button (014, 461) 3 AF-assist illuminator (060, 390) 7 Headphone connector (0 374) 8 Charge lamp (040) Red-eye reduction lamp 9 USB connector (0492, 599) (0156, 619) 10 HDMI connector (0604) Self- - Nikon Z 50 | Reference Manual - Page 45
20 12 3 4 19 18 5 17 6 16 7 8 15 9 10 14 13 12 11 1 Diopter adjustment control 10 Multi selector (029) (0 13) 2 DISP button (025) 3 Photo/movie selector (056, 63) 4 AF-ON button (028) 5 Sub-selector (027, 133) 11 G button (028, 212) 12 c (E) button (0125, 131) 13 W (Q) button (027, - Nikon Z 50 | Reference Manual - Page 46
10 9 8 7 6 1 Lens mount (050, 93) 2 Lens release button (051) 3 CPU contacts 4 Tripod socket 5 Power connector cover (0 733) 1 2 3 4 5 6 Battery-chamber cover 7 Battery-chamber cover latch 8 Fn2 button (035, 74) 9 Fn1 button (035, 94) 10 Sub-command dial (016) 4 Parts of the Camera - Nikon Z 50 | Reference Manual - Page 47
D Do Not Touch the Image Sensor Under no circumstances should you exert pressure on the image sensor, poke it with cleaning tools, or subject it to powerful air currents from a blower. These actions could scratch or otherwise damage the sensor. For information on cleaning the image sensor, see " - Nikon Z 50 | Reference Manual - Page 48
The Control Panel The control panel lights when the camera is on. At default settings, the following indicators are displayed. For a full list of the indicators that appear in the control panel, see "The Camera Display and Control Panel" (0681) in "Technical Notes". 1 2 7 6 1 Shutter speed (0108, - Nikon Z 50 | Reference Manual - Page 49
The Monitor At default settings, the following indicators appear in the monitor. For a full list of indicators, see "The Camera Display and Control Panel" (0681) in "Technical Notes". ❚❚ Photo Mode 2 3 4 5 6 7 8 9 10 11 1 12 1 AF-area brackets (077) 2 Shooting mode (0106) 3 Focus point (077) 4 - Nikon Z 50 | Reference Manual - Page 50
15 14 13 12 11 10 9 8 7 1 i icon (0136) 2 Exposure indicator Exposure (0110) Exposure compensation (0 122) 3 "k" (appears when memory remains for over 1000 exposures; 047) 4 Number of exposures remaining (047, 773) 5 ISO sensitivity (0118) 6 ISO sensitivity indicator (0 118) Auto ISO sensitivity - Nikon Z 50 | Reference Manual - Page 51
❚❚ Movie Mode 1 23 4 5 9 8 7 1 Recording indicator (063) "No movie" indicator (065) 2 Destination (0177) 3 Frame size and rate/image quality (0168) 4 Image area (0175) 5 Time remaining (063) 6 6 Release mode (still photography; 0130) 7 Sound level (0174) 8 Microphone sensitivity (0 174) 9 - Nikon Z 50 | Reference Manual - Page 52
The Viewfinder At default settings, the following indicators appear in the viewfinder. For a full list of indicators, see "The Camera Display and Control Panel" (0681) in "Technical Notes". ❚❚ Photo Mode 1 2 3 4 5 6 7 8 9 10 11 12 1 Battery indicator (044) 2 "Clock not set" indicator (0 55) 3 - Nikon Z 50 | Reference Manual - Page 53
13 12 11 10 9 8 7 6 1 "k" (appears when memory remains for over 1000 exposures; 047) 2 Number of exposures remaining (047, 773) 3 ISO sensitivity (0118) 4 ISO sensitivity indicator (0 118) Auto ISO sensitivity indicator (0 120) 5 4321 5 Exposure indicator Exposure (0110) Exposure compensation (0 - Nikon Z 50 | Reference Manual - Page 54
❚❚ Movie Mode 1 23 9 87 1 Recording indicator (063) "No movie" indicator (065) 2 Frame size and rate/image quality (0168) 3 Image area (0175) 4 Destination (0177) 6 54 5 Release mode (still photography; 0130) 6 Time remaining (063) 7 Frequency response (0373) 8 Microphone sensitivity (0 174) 9 - Nikon Z 50 | Reference Manual - Page 55
Camera Controls Viewfinder • Placing your eye to the viewfinder activates the eye sensor, switching the display from the monitor to the viewfinder. Note that the eye sensor will also respond to other objects, such as your fingers. • The viewfinder can be used for menus and playback if desired. D The - Nikon Z 50 | Reference Manual - Page 56
The M (Monitor Mode) Button Press the M button to cycle between viewfinder and monitor displays. Press the M button to cycle through the displays as follows. [Automatic display switch]: The camera automatically switches between the viewfinder and monitor displays based on information from the eye - Nikon Z 50 | Reference Manual - Page 57
mode dial lock release and rotate the mode dial to choose a shooting mode. Mode b Auto P Programmed auto S Shutterpriority auto A Aperturepriority auto M Manual U1 U2 U3 User settings modes Description A simple, "point-and-shoot" mode that leaves the camera in charge of settings (056, 63 - Nikon Z 50 | Reference Manual - Page 58
The Command Dials Rotate the command dials to choose settings for shutter speed, aperture, or the functions assigned to other camera controls. The S Button Adjust the camera's sensitivity to light (ISO sensitivity) in accord with lighting conditions. ❚❚ Photo Mode ISO sensitivity can be adjusted by - Nikon Z 50 | Reference Manual - Page 59
❚❚ Movie Mode ISO sensitivity can be adjusted by holding the S button and rotating the main command dial. ISO sensitivity for movie recording can be adjusted in mode M only. • The value selected for [ISO sensitivity settings] > [ISO sensitivity (mode M)] applies when [Off] is selected for [ISO - Nikon Z 50 | Reference Manual - Page 60
The E (Exposure Compensation) Button Alter exposure from the value suggested by the camera. Exposure compensation can be used to make pictures brighter or darker. −1 EV No exposure compensation • Exposure compensation can be adjusted by holding the E button and rotating either command dial. • - Nikon Z 50 | Reference Manual - Page 61
Touch Controls The touch-sensitive monitor offers a variety of controls that can be operated by touching the display with your fingers. During viewfinder photography, touch controls are disabled and cannot be used for focus or the like. ❚❚ Focusing and Releasing the Shutter • Touch the monitor to - Nikon Z 50 | Reference Manual - Page 62
• Tap Z or press J to select the chosen option and return to the previous display. ❚❚ Playback • Flick left or right to view other pictures during full-frame playback. • In full-frame playback, touching the bottom of the display brings up a frame-advance bar. Slide your finger left or right over the - Nikon Z 50 | Reference Manual - Page 63
to choose the number of images displayed from 4, 9, and 72 frames. ❚❚ Viewing Movies • Movies are indicated by a 1 icon; to start playback, tap the on-screen guide. • Tap the display to pause. Tap again to resume. • Tap Z to exit to full-frame playback. Camera Controls 21 - Nikon Z 50 | Reference Manual - Page 64
❚❚ The i Menu • Tap the i icon to display the i menu during shooting (033, 136). • Tap items to view and change options. ❚❚ Text Entry • When a keyboard is displayed, you can enter text by tapping the keys. 1 Text display area 1 2 Keyboard area 2 3 Keyboard selection 3 • To position the cursor, tap - Nikon Z 50 | Reference Manual - Page 65
❚❚ Navigating the Menus • Slide up or down to scroll. • Tap a menu icon to choose a menu. • Tap menu items to display options. You can then choose the desired option by tapping icons or sliders. • To exit without changing settings, tap Z. Camera Controls 23 - Nikon Z 50 | Reference Manual - Page 66
D The Touch Screen • The touch screen responds to static electricity. It may not respond when touched with fingernails or gloved hands. • Do not touch the screen with sharp objects. • Do not use excessive force. • The screen may not respond when covered with third-party protective films. • The - Nikon Z 50 | Reference Manual - Page 67
The DISP Button Use the DISP button to cycle through the following displays: ❚❚ Photo Mode 1 2 3 6 5 4 1 Indicators on 2 Simplified display 3 Histogram 1, 2 4 Virtual horizon 5 Information display (0681) 6 Flash info (0626, 657) 3 1 Displayed when [On] is selected for Custom Setting d9 [ - Nikon Z 50 | Reference Manual - Page 68
3 Displayed when an optional SB-5000, SB-500, SB-400, or SB-300 flash unit is mounted on the accessory shoe or a WR-R10 wireless remote controller commands a flash unit via radio flash control. A The Viewfinder The DISP button can also be used to choose the information displayed in the viewfinder. - Nikon Z 50 | Reference Manual - Page 69
The X and W (Q) Buttons Zoom the display in the monitor in or out during shooting or playback. ❚❚ Shooting Press X to zoom in on the view through the lens during shooting. Press X to increase the zoom ratio, W (Q) to zoom out. ❚❚ Playback Press X to zoom in on pictures during full-frame playback. - Nikon Z 50 | Reference Manual - Page 70
The AF-ON Button The AF-ON button can be used for focus in autofocus mode. The G Button Press the G button to view the menus. 1 1 D [PLAYBACK MENU] 2 (0 232) 3 4 5 6 2 C [PHOTO SHOOTING 9 MENU] (0248) 3 1 [MOVIE SHOOTING MENU] 7 (0 363) 8 4 A [CUSTOM SETTING MENU] (0 377) 5 B [SETUP - Nikon Z 50 | Reference Manual - Page 71
❚❚ Using the Menus You can navigate the menus using the multi selector and J button. 1 Move cursor up 2 Select highlighted item 3 Display sub-menu, select highlighted item, or move cursor right 4 Move cursor down 5 Cancel and return to previous menu, or move cursor left 1 Highlight the icon for the - Nikon Z 50 | Reference Manual - Page 72
3 Position the cursor in the selected menu. Press 2 to position the cursor in the selected menu. 4 Highlight a menu item. Press 1 or 3 to highlight a menu item. 5 Display options. Press 2 to display options for the selected menu item. 30 Camera Controls - Nikon Z 50 | Reference Manual - Page 73
6 Highlight an option. Press 1 or 3 to highlight an option. 7 Select the highlighted option. • Press J to select the highlighted option. • To exit without making a selection, press the G button. • To exit the menus and return to shooting mode, press the shutter-release button halfway. Camera - Nikon Z 50 | Reference Manual - Page 74
D Grayed-Out Items Some items and menu options may be unavailable depending on the mode and camera status. Unavailable items are displayed in gray. A The d (Help) Icon • Where available, a description of the currently-selected item can be viewed by pressing the W (Q) button. • Press 1 or 3 to scroll - Nikon Z 50 | Reference Manual - Page 75
display or by highlighting items and pressing J; selections can then be made using the multi selector. • Items for which the camera displays an on-screen guide can be adjusted by highlighting them in the i menu and rotating a command dial. In some cases, adjustments can be made using both the main - Nikon Z 50 | Reference Manual - Page 76
❚❚ Customizing the i Menu The items displayed in the photo-mode i menu can be chosen using Custom Setting f1 or g1 [Customize i menu]. 1 Highlight Custom Setting f1 or g1 [Customize i menu] and press J. See "The G Button" (028) for information on using the menus. 2 Highlight the position you want to - Nikon Z 50 | Reference Manual - Page 77
The Fn1 and Fn2 Buttons Use the Fn1 or Fn2 button for quick access to selected settings. • By default, the Fn1 button is assigned white balance (094) and the Fn2 button focus- and AF-area-mode selection (074). • The assigned setting can be adjusted by holding the Fn1 or Fn2 button and rotating the - Nikon Z 50 | Reference Manual - Page 78
3 Highlight the desired item and press J. • The item will be assigned to the selected button and the options shown in Step 2 will be displayed. • Repeat Steps 2 and 3 to assign a role to the remaining button. 4 Press the G button. Changes will be saved and the Custom Settings menu will be displayed. - Nikon Z 50 | Reference Manual - Page 79
First Steps Attaching the Strap To attach a strap (whether the supplied strap or one that has been purchased separately): Attaching the Strap 37 - Nikon Z 50 | Reference Manual - Page 80
Charging the Battery Charge the supplied EN-EL15c battery before use. D The Battery and Charger Read and follow the warnings and cautions in "For Your Safety" (0xxxv) and "Caring for the Camera and Battery: Cautions" (0743). The Battery Charger Depending on the country or region, the charger comes - Nikon Z 50 | Reference Manual - Page 81
. • The ambient temperature is too hot or too cold: Use the battery charger at temperatures within the designated temperature range (0- 40 °C/+32-104 °F). If the problem persists, unplug the charger and end charging. Bring the battery and charger to a Nikon-authorized - Nikon Z 50 | Reference Manual - Page 82
Charging AC Adapters When a battery is inserted in the camera, an EH-7P charging AC adapter (available separately for the Z 6II, supplied with the Z 7II) can be used to charge the battery or power the camera. • EN-EL15a or EN-EL15 batteries cannot be charged using a charging AC adapter. Use an MH- - Nikon Z 50 | Reference Manual - Page 83
2 After confirming that the camera is off, connect the charging AC adapter (q) and plug the adapter in. Keep the plug straight during insertion and removal. Charging • The battery charges while the camera is off. • The camera charge lamp (w) lights amber while charging is in progress. The lamp turns - Nikon Z 50 | Reference Manual - Page 84
3 Unplug the charging AC adapter when charging is complete or when it is no longer needed to power the camera. D The Charging AC Adapter If the battery cannot be charged using the charging AC adapter, for example because the battery is not compatible or the temperature of the camera is elevated, the - Nikon Z 50 | Reference Manual - Page 85
Inserting the Battery • Turn the camera off before inserting or removing the battery. • Using the battery to keep the orange battery latch pressed to one side, slide the battery into the battery chamber until the latch locks it in place. Removing the Battery To remove the battery, turn the camera - Nikon Z 50 | Reference Manual - Page 86
Battery Level • The battery level is shown in the shooting display and control panel while the camera is on. Monitor Viewfinder Control panel • The battery level display changes as the battery level diminishes, from L through K, J, I, and H. When the battery level falls to H, suspend shooting - Nikon Z 50 | Reference Manual - Page 87
128GB Inserting Memory Cards The camera is equipped with two memory card slots: a slot that takes one CFexpress or XQD memory card (q) and another that takes one SD memory card (w), for a total of two cards, one of each type. • Turn the camera off before inserting or removing memory cards. • - Nikon Z 50 | Reference Manual - Page 88
16GB Removing Memory Cards After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w). 46 Inserting Memory Cards - Nikon Z 50 | Reference Manual - Page 89
Number of Exposures Remaining • When the camera is on, the shooting display and control panel show the number of photographs that can be taken at current settings. • When memory cards are inserted in both slots and the default option-[Overflow]-is selected for [Secondary slot function], the camera - Nikon Z 50 | Reference Manual - Page 90
D Memory Cards • Memory cards may be hot after use. Observe due caution when removing memory cards from the camera. • Do not perform the following operations during formatting or while data are being recorded, deleted, or copied to a computer or other device. Failure to observe these precautions - Nikon Z 50 | Reference Manual - Page 91
D No Memory Card Inserted If no memory card is inserted, a "no memory card" indicator will appear in the shooting display and [-E-] will appear in both the control panel and the shooting display. A The Write Protect Switch • SD memory cards are equipped with a write-protect switch. Sliding the - Nikon Z 50 | Reference Manual - Page 92
Attaching a Lens • The camera can be used with Z mount lenses. The lens generally used in this manual for illustrative purposes is a NIKKOR Z 24-70mm f/4 S. • Be careful to prevent dust entering the camera. • Confirm that the camera is off before attaching the lens. - - Nikon Z 50 | Reference Manual - Page 93
- Rotate the lens as shown until it clicks into place (u). • Remove the front lens cap before taking pictures. D F Mount Lenses • Be sure to attach the FTZ mount adapter (available separately) before using F mount lenses. • Attempting to attach F mount lenses directly to the camera could damage the - Nikon Z 50 | Reference Manual - Page 94
Choose a Language and Set the Clock The language option in the setup menu is automatically highlighted the first time menus are displayed. Choose a language and set the camera clock. 1 Turn the camera on. 2 Highlight [Language] in the setup menu and press 2. • The [Language] item is automatically - Nikon Z 50 | Reference Manual - Page 95
3 Select a language. Press 1 or 3 to highlight the desired language and press J (the languages available vary with the country or region in which the camera was originally purchased). 4 Highlight [Time zone and date] and press 2. 5 Choose a time zone. • Select [Time zone] in the [Time zone and date] - Nikon Z 50 | Reference Manual - Page 96
6 Turn daylight saving time on or off. • Select [Daylight saving time] in the [Time zone and date] display. • Highlight [On] (daylight saving time on) or [Off] (daylight saving time off) and press J. • Selecting [On] advances the clock one hour; to undo the effect, select [Off]. 7 Set the clock. • - Nikon Z 50 | Reference Manual - Page 97
9 Exit the menus. Lightly press the shutter-release button halfway to exit to shooting mode. D The t Icon A flashing t icon in the shooting display indicates that the camera clock has been reset. The date and time recorded with new photographs will not be correct; use the [Time zone and date] > [ - Nikon Z 50 | Reference Manual - Page 98
Basic Photography and Playback Taking Photographs (b Mode) Select b (auto) mode for simple "point-and-shoot" photography. D Lenses with Retractable Barrels Lenses with retractable barrels must be extended before use. Rotate the lens zoom ring as shown until the lens clicks into the extended position - Nikon Z 50 | Reference Manual - Page 99
2 Select photo mode by rotating the photo/ movie selector to C. 3 Pressing the mode dial lock release on top of the camera, rotate the mode dial to b. Taking Photographs (b Mode) 57 - Nikon Z 50 | Reference Manual - Page 100
4 Ready the camera. Holding the handgrip in your right hand and cradling the camera body or lens with your left, bring your elbows in against the sides of your chest. • Framing photos in the viewfinder: Landscape (wide) orientation Portrait (tall) orientation • Framing photos in the monitor: - Nikon Z 50 | Reference Manual - Page 101
5 Frame the photograph. Position the main subject in the AFarea brackets. • If the camera detects a human face, the AF-area brackets will be replaced by a yellow border around the subject's face indicating the focus point. If eyes are detected, the yellow focus point will instead appear over one or - Nikon Z 50 | Reference Manual - Page 102
6 Press the shutter-release button halfway to focus. • The focus point will be displayed in green when the camera focuses. If the camera is unable to focus, the AF-area brackets will flash. • The AF-assist illuminator may light to assist the focus operation if the subject is poorly lit. • You can - Nikon Z 50 | Reference Manual - Page 103
7 Smoothly press the shutter- release button the rest of the way down to take the photograph. • You can also take a photograph by touching the monitor. Touch your subject to focus and lift your finger to release the shutter (088). D The Memory Card Access Lamp The memory card access lamp will light - Nikon Z 50 | Reference Manual - Page 104
A Using Zoom in Photo Mode To zoom in on the display in photo mode (to a maximum of approximately 12×), press the X button. • Press X to zoom in, W (Q) to zoom out. • A navigation window will appear at the bottom right corner of the display. • Use the multi selector to scroll to areas of the frame - Nikon Z 50 | Reference Manual - Page 105
Shooting Movies (b Mode) b (auto) mode can also be used for simple, "point-and-shoot" movie recording. 1 Turn the camera on. The monitor and control panel will light. 2 Select movie mode by rotating the photo/ movie selector to 1. Note that optional flash units cannot be used when the camera is in - Nikon Z 50 | Reference Manual - Page 106
4 Press the movie-record button to start recording. • A recording indicator will be displayed in the monitor. The monitor also shows the time remaining, or in other words the approximate amount of new footage that can be recorded to the memory card. 1 1 Recording indicator 2 2 Time remaining • - Nikon Z 50 | Reference Manual - Page 107
5 Press the movie-record button again to end recording. D The Memory Card Access Lamp The memory card access lamp will light while the movie is being recorded. Do not remove the memory card or battery. D The 0 Icon A 0 icon indicates that movies cannot be recorded. Shooting Movies (b Mode) 65 - Nikon Z 50 | Reference Manual - Page 108
D Recording Movies • Movie recording will end automatically if: - The maximum length is reached - Another mode is selected - The photo/movie selector is rotated to C - The lens is removed • Sounds made by the camera may be audible in footage recorded: - During autofocus - During vibration reduction - Nikon Z 50 | Reference Manual - Page 109
Taking Photos in Movie Mode Photos can be taken in movie mode by pressing the shutterrelease button all the way down. The release mode (singleframe or continuous) can be selected before shooting begins using the c (E) button. • A C icon will flash in the display when a photo is taken. • The frame - Nikon Z 50 | Reference Manual - Page 110
D Photography and Movie Recording • You may notice the following in the shooting display. These phenomena will also be visible in any photos or footage recorded with the camera. - Flicker or banding in scenes lit by such sources as fluorescent, mercury vapor, or sodium lamps - Moving objects in the - Nikon Z 50 | Reference Manual - Page 111
Playback Press the K button to view photos and movies recorded with the camera. Viewing Photos Photos can be viewed by following the steps below. 1 Press the K button. • A picture will be displayed in the monitor or viewfinder. • The memory card containing the picture currently displayed is shown by - Nikon Z 50 | Reference Manual - Page 112
press the J button to start playback (a progress bar shows your approximate position in the movie). 1 2 4 3 1 1 icon 2 Length 3 a icon 4 Current position/total length 5 Progress bar 6 Volume 7 Guide 5 67 70 Playback - Nikon Z 50 | Reference Manual - Page 113
❚❚ Movie Playback Operations Operation Pause Resume Rewind/ advance Start slow-motion playback Jog rewind/advance Description Press 3 to pause playback. Press the J button to resume playback when playback is paused or during rewind/advance. • Press 4 to rewind, 2 to advance. Speed increases with - Nikon Z 50 | Reference Manual - Page 114
Deleting Unwanted Pictures Pictures can be deleted as described below. Note that once deleted, pictures cannot be recovered. 1 Display the picture. • Press the K button to start playback and press 4 or 2 until the desired picture is displayed. • The location of the current image is shown by an icon - Nikon Z 50 | Reference Manual - Page 115
A The Playback Menu [Delete] Item Use [Delete] in the playback menu to: • Delete multiple pictures • Delete pictures taken on selected dates • Delete all pictures in selected folders Playback 73 - Nikon Z 50 | Reference Manual - Page 116
Basic Settings Focus Focus Mode Choose how the camera focuses. ❚❚ Choosing a Focus Mode • The focus mode can be selected using the [Focus mode] items in the i menu and the photo and movie shooting menus (0164, 295, 371). • At default settings, the focus mode can also be selected by holding the Fn2 - Nikon Z 50 | Reference Manual - Page 117
is pressed halfway, the focus point will turn from red to green and focus will lock. • This option is only available in movie mode. MF [Manual focus] Focus manually (091). The shutter can be released whether or not the subject is in focus. Focus 75 - Nikon Z 50 | Reference Manual - Page 118
D Autofocus • The camera may be unable to focus if: - The subject contains lines parallel to the long edge of the frame - The subject lacks contrast - The subject in the focus point contains areas of sharply contrasting brightness - The focus point includes night-time spot lighting or a neon sign or - Nikon Z 50 | Reference Manual - Page 119
AF-Area Mode Choose how the camera selects the focus-point for autofocus. • In modes other than [Auto-area AF], [Auto-area AF (people)], and [Auto-area AF (animals)], the focus point can be positioned using the sub-selector (0133) or multi selector. ❚❚ Choosing an AF-Area Mode • AF-area mode can be - Nikon Z 50 | Reference Manual - Page 120
Option d [Single-point AF] e [Dynamicarea AF] Description • The camera focuses on a point selected by the user. • Use with stationary subjects. • The camera focuses on a point selected by the user. If the subject briefly leaves the selected point, the camera will focus based on information from - Nikon Z 50 | Reference Manual - Page 121
Option Description • As for single-point AF except that the camera focuses on a wider area. f [Wide-area AF (S)] • Choose for snapshots, subjects that are in motion, and other subjects that are difficult to photograph using single-point AF. • During movie recording, wide-area AF can be - Nikon Z 50 | Reference Manual - Page 122
Option Description • The camera automatically detects the subject and selects the focus area. h [Auto-area AF] • Use on occasions when you don't have time to select the focus point yourself, for portraits, or for snapshots and other spur-of-the-moment photos. • If [Auto-area AF (people)] is - Nikon Z 50 | Reference Manual - Page 123
A s: The Center Focus Point In all AF-area modes except [Auto-area AF], [Auto-area AF (people)], and [Auto-area AF (animals)], a dot appears in the focus point when it is in the center of the frame. A Quick Focus-Point Selection • For quicker focus-point selection, choose [Every other point] for - Nikon Z 50 | Reference Manual - Page 124
❚❚ Focusing on the Faces or Eyes of Portrait Subjects (Face/Eye-Detection AF) The camera detects the faces and eyes of human portrait subjects when [Widearea AF (L-people)] or [Auto-area AF (people)] is selected for [AF-area mode] in the photo and movie shooting menus (face/eye-detection AF). • When - Nikon Z 50 | Reference Manual - Page 125
• If the subject looks away after their face is detected, the focus point will move to track their motion. • During playback, you can zoom in on the face or eye used for focus by pressing J. D Face/Eye-Detection AF • Eyes or faces may not be detected as expected if: - the subject's face occupies a - Nikon Z 50 | Reference Manual - Page 126
❚❚ Focusing on the Faces or Eyes of Animals (AnimalDetection AF) The camera detects the faces and eyes of dogs and cats when [Wide-area AF (L-animals)] or [Auto-area AF (animals)] is selected for [AF-area mode] in the photo and movie shooting menus (animal-detection AF). • When the camera detects a - Nikon Z 50 | Reference Manual - Page 127
D Animal-Detection AF • Eyes or faces may not be detected as expected if: - the subject's face occupies a very large or very small proportion of the frame, - the subject's face is lit too brightly or too poorly, - the subject's face or eyes are obscured by fur or other objects, - the subject's eyes - Nikon Z 50 | Reference Manual - Page 128
❚❚ Subject-Tracking AF When [Auto-area AF], [Auto-area AF (people)], or [Auto-area AF (animals)] is selected for AF-area mode, the camera can track the subject in the selected focus point. • Press J to enable focus tracking; the focus point will change to a targeting reticle. • Position the reticle - Nikon Z 50 | Reference Manual - Page 129
D Subject Tracking The camera may be unable to track subjects if they: • are similar in color or brightness to the background, • change visibly in size, color, or brightness, • are too large or too small, • are too dark or too bright, • move quickly, or • leave the frame or are obscured by other - Nikon Z 50 | Reference Manual - Page 130
The Touch Shutter Touch the display to focus on the selected point. The shutter will be released when you lift your finger from the display. Tap the icon shown in the illustration to choose the operation performed by tapping the display. Option [Touch W shutter/ touch AF] Description • Touch the - Nikon Z 50 | Reference Manual - Page 131
Option V [Touch AF] X [Off] [Position f focus point] Description • Touch the display to focus on the selected point. Lifting your finger from the display does not release the shutter. • If [Auto-area AF], [Auto-area AF (people)], or [Auto-area AF (animals)] is selected for AF-area mode, the - Nikon Z 50 | Reference Manual - Page 132
D Taking Pictures Using Touch Shooting Options • Touch controls cannot be used for manual focus. • The shutter-release button can be used to take pictures when the W icon is displayed. • Touch controls cannot be used to take photographs during - Nikon Z 50 | Reference Manual - Page 133
focus is available in manual focus mode. Use manual focus when, for example, autofocus does not produce the desired results. • Position the focus point over your subject and rotate the focus or control ring - Nikon Z 50 | Reference Manual - Page 134
focus point is in front of the subject. (steady) The focus point is behind the subject. (flashes) The camera is unable to focus. • When using manual focus with subjects not suited to autofocus, note that the in-focus indicator (I) may be displayed when the subject is not in focus. Zoom in - Nikon Z 50 | Reference Manual - Page 135
the camera body, which shows the position of the focal plane inside the camera (q). Use this mark when measuring the distance to your subject for manual focus or macro photography. The distance between the focal plane and the lens mounting flange is known as the "flange-back distance" (w). On this - Nikon Z 50 | Reference Manual - Page 136
White Balance White balance ensures that white objects appear white, regardless of the color of the light source. The default setting (auto white balance, or j) is recommended with most light sources; if the desired results cannot be achieved with auto white balance, choose another option as - Nikon Z 50 | Reference Manual - Page 137
• When 4 [Auto] or I [Fluorescent] is selected, you can choose a sub-option by holding the Fn1 button and rotating the sub-command dial. Option 4 [Auto] [Keep white i (reduce warm colors)] j [Keep overall atmosphere] k [Keep warm lighting colors] Color temperature * Description White - Nikon Z 50 | Reference Manual - Page 138
Option Color temperature * Description D [Natural light auto] Approx. 4500-8000 K When used under natural light in place of 4 [Auto], this option produces colors closer to those seen by the naked eye. H [Direct sunlight] Approx. 5200 K Use with subjects lit by direct sunlight. G [Cloudy] - Nikon Z 50 | Reference Manual - Page 139
the color temperature directly. Approx. • To choose a color 2500-10000 K temperature, hold the Fn1 button and rotate the subcommand dial. L [Preset manual] • Measure white balance for the subject or light source or copy white balance from an existing photograph. • To choose a white balance preset - Nikon Z 50 | Reference Manual - Page 140
the photo and movie shooting menus (0146, 267). D Studio Flash Lighting 4 [Auto] may not produce the desired results with large studio flash units. Use preset manual white balance or set white balance to 5 [Flash] and use fine-tuning to adjust white balance. 98 White Balance - Nikon Z 50 | Reference Manual - Page 141
A 4 [Auto] • The photo info for pictures shot using 4 [Auto] lists the color temperature selected by the camera at the time the picture was taken. You can use this as reference when choosing a value for K [Choose color temperature]. • To view shooting data during playback, select [Playback display - Nikon Z 50 | Reference Manual - Page 142
Silent Photography To enable the electronic shutter and eliminate the noise and vibration caused by operation of the mechanical shutter, select [On] for [Silent photography] in the photo shooting menu. • An icon is displayed while silent photography is in effect. • There is no limit to the number of - Nikon Z 50 | Reference Manual - Page 143
D Silent Photography • Selecting [On] for [Silent photography] does not completely silence the camera. Camera sounds may still be audible, for example during autofocus or aperture adjustment, in the latter case most noticeably at apertures smaller (i.e., at f-numbers higher) than f/5.6. • You may - Nikon Z 50 | Reference Manual - Page 144
Rating Pictures Selected pictures can be rated or marked as candidates for later deletion. Ratings can also be viewed in Capture NX-D and ViewNX-i. Protected pictures cannot be rated. 1 Press the K button to start playback. 2 Select the desired picture and press the i button. The playback i menu - Nikon Z 50 | Reference Manual - Page 145
4 Choose a rating. • Rotate the main command dial to choose a rating of from zero to five stars, or select d to mark the picture as a candidate for later deletion. • Press J to select the highlighted option. Rating Pictures 103 - Nikon Z 50 | Reference Manual - Page 146
Protecting Pictures from Deletion Pictures can be protected to prevent their being deleted accidentally. Protected pictures will however be deleted when the memory card is formatted. 1 Press the K button to start playback. 2 Select the desired picture and press the i button. The playback i menu will - Nikon Z 50 | Reference Manual - Page 147
A Removing Protection from All Pictures To remove protection from all pictures in the folder or folders currently selected for [Playback folder] in the playback menu, select [Unprotect all] in the i menu. Protecting Pictures from Deletion 105 - Nikon Z 50 | Reference Manual - Page 148
Shooting Controls The Mode Dial Use the mode dial to choose whether shutter speed and/or aperture can be adjusted manually or are set automatically by the camera. Using the Mode Dial Press the mode dial lock release and rotate the mode dial to choose from - Nikon Z 50 | Reference Manual - Page 149
Mode A Aperturepriority auto M Manual U1 U2 U3 User setting mode Description Use to blur backgrounds or bring both foreground and background into focus. You choose the aperture; the camera - Nikon Z 50 | Reference Manual - Page 150
S (Shutter-Priority Auto) • In shutter-priority auto, you choose the shutter speed while the camera automatically adjusts aperture for optimal exposure. Choose fast shutter speeds to "freeze" motion, slow shutter speeds to suggest motion by blurring moving objects. • Rotate the main command dial to - Nikon Z 50 | Reference Manual - Page 151
M (Manual) • You control both shutter speed and aperture. Choose this mode for long time-exposures of such subjects as fireworks or the night sky ("Bulb" or " - Nikon Z 50 | Reference Manual - Page 152
D Exposure Indicators The exposure indicators in the monitor and viewfinder show whether the photograph would be under- or over-exposed at current settings. The exposure indicators can be read as follows (the display varies with the option selected for Custom Setting b1 [EV steps for exposure cntrl - Nikon Z 50 | Reference Manual - Page 153
A Extended Shutter Speeds For shutter speeds as slow as 900 s (15 minutes), select [On] for Custom Setting d6 [Extended shutter speeds (M)]. A Auto ISO Sensitivity Control (Mode M) If auto ISO sensitivity control (0120) is enabled, ISO sensitivity will automatically be adjusted for optimal exposure - Nikon Z 50 | Reference Manual - Page 154
❚❚ Long Time-Exposures The camera offers two options for long time-exposures: "Bulb" and "Time". Long time-exposures can be used for pictures of fireworks, night scenery, the stars, or moving lights. A 35-second exposure shot at a shutter speed of "Bulb" and an aperture of f/25 Shutter speed Bulb - Nikon Z 50 | Reference Manual - Page 155
3 Rotate the main command dial to choose a shutter speed of Bulb ("Bulb") or Time ("Time"). Bulb Time 4 Focus and start the exposure. • "Bulb": Press the shutter-release button all the way down to start the exposure. Keep the shutter-release button pressed during the exposure. • "Time": Press the - Nikon Z 50 | Reference Manual - Page 156
D Long Time-Exposures • Note that "noise" (bright spots, randomly-spaced bright pixels or fog) may be present in long exposures. • Bright spots and fog can be reduced by choosing [On] for [Long exposure NR] in the photo shooting menu. • Nikon recommends using a fully-charged battery, a charging AC - Nikon Z 50 | Reference Manual - Page 157
U1, U2, and U3 (User Settings Modes) Frequently-used settings can be assigned to user setting positions U1 through U3 and later recalled simply by rotating the mode dial. ❚❚ Save User Settings 1 Adjust settings. The settings that can be saved include: • photo shooting menu options, • movie shooting - Nikon Z 50 | Reference Manual - Page 158
4 Save user settings. Highlight [Save settings] using 1 or 3 and press J to assign current settings to the selected position. 5 Take pictures using the saved settings. Rotating the mode dial to U1, U2, or U3 recalls the settings last saved to that position. D User Settings U1, U2, and U3 The release - Nikon Z 50 | Reference Manual - Page 159
❚❚ Resetting User Settings 1 Highlight [Reset user settings] in the setup menu. Highlight [Reset user settings] in the setup menu and press 2. 2 Select a position. Highlight [Reset U1], [Reset U2], or [Reset U3] and press 2. 3 Reset user settings. Highlight [Reset] and press J to restore default - Nikon Z 50 | Reference Manual - Page 160
and rotate the main command dial. • Choose from the following settings. Z 7II: Choose from settings of ISO 64 to 25600; the camera also supports settings below ISO 64 by about 0.3, 0.5, 0.7, and 1 EV (ISO 32 equivalent) and above ISO 25600 by about 0.3, 0.5, 0.7, 1, and 2 EV (ISO 102400 equivalent - Nikon Z 50 | Reference Manual - Page 161
D High ISO Sensitivities The higher the ISO sensitivity, the less light needed to make an exposure, allowing pictures to be taken when lighting is poor and helping prevent blur when the subject is in motion. Note, however, that the higher the sensitivity, the more likely the image is to be affected - Nikon Z 50 | Reference Manual - Page 162
Auto ISO Sensitivity Control Auto ISO sensitivity control automatically adjusts ISO sensitivity if optimal exposure cannot be achieved at the value selected by the user in modes P, S, A, and M. You can select an upper limit for auto ISO sensitivity control (100-Hi 2.0 in the case of the Z 7II, 200- - Nikon Z 50 | Reference Manual - Page 163
D Auto ISO Sensitivity Control • If value currently selected for [ISO sensitivity settings] is higher than that chosen for [Maximum sensitivity], the value chosen for [ISO sensitivity settings] will serve as the upper limit for auto ISO sensitivity control. • During flash photography, shutter speed - Nikon Z 50 | Reference Manual - Page 164
The E (Exposure Compensation) Button Use this button to alter exposure from the value suggested by the camera. Exposure compensation can be used to make pictures brighter or darker. -1 EV No exposure compensation +1 EV Adjusting Exposure Compensation • Hold the E button and rotate the main - Nikon Z 50 | Reference Manual - Page 165
• Adjustments to exposure compensation are shown in the control panel. • Normal exposure can be restored by setting exposure compensation to ±0. Exposure compensation is not reset when the camera is turned off. • At values other than ±0.0, the camera displays a E icon (movie mode) or a E icon and - Nikon Z 50 | Reference Manual - Page 166
D Mode M • In shooting mode M, exposure compensation affects only the exposure indicator; shutter speed and aperture do not change. • The exposure indicator and the current value for exposure compensation can be displayed by pressing the E button. • When auto ISO sensitivity control (0120) is in - Nikon Z 50 | Reference Manual - Page 167
The c/E (Release Mode/Self-Timer) Button Choose the operation performed when the shutter is released. Choosing a Release Mode • After pressing the c (E) button, highlight a release mode using the multi selector and then press J to select the highlighted option. • The option currently selected is - Nikon Z 50 | Reference Manual - Page 168
❚❚ Photo Mode Option Description U [Single frame] The camera takes one photograph each time the shutter-release button is pressed. • The camera takes photographs at a selected rate while the shutter-release button is pressed. V [Continuous L] • The frame rate can be chosen by pressing 3 - Nikon Z 50 | Reference Manual - Page 169
D Frame Advance Rate Frame advance rate varies with camera settings. Release mode Image quality NEF (RAW) bit depth Silent photography Off On JPEG [Continuous L] NEF (RAW) - 12 bit 14 bit User-selected frame advance rate User-selected frame advance rate 1 User-selected frame advance rate 2 - Nikon Z 50 | Reference Manual - Page 170
1 In the case of the Z 7II, the rate when 5 fps is selected is approximately 4 fps. In the case of the Z 6II, the rate when 5 fps is selected is approximately 4.5 fps. 2 In the case of the Z 7II, the rate when 4 fps or faster is selected is approximately 3.5 fps. In the case of the Z 6II, the rate - Nikon Z 50 | Reference Manual - Page 171
D Continuous H (Extended) Depending on camera settings, exposure may vary erratically during each burst. This can be prevented by locking exposure (0133). D The Memory Buffer • While the shutter-release button is pressed halfway, the frame-count display will show the number of pictures that can be - Nikon Z 50 | Reference Manual - Page 172
❚❚ Movies In movie mode, you can choose the operation performed when the shutter-release button is pressed (067). Option Description The camera takes one photograph each time the U [Single frame] shutter-release button is pressed. Up to 50 (Z 7II) or 40 (Z 6II) photographs can be taken with - Nikon Z 50 | Reference Manual - Page 173
The Self-Timer In self-timer mode, pressing the shutter-release button starts a timer, and a photo is taken when the timer expires. 1 Press the c (E) button, highlight [Self-timer] using the multi selector, and press 3. 2 Choose the desired shutter- release delay and number of shots using the multi - Nikon Z 50 | Reference Manual - Page 174
4 Start the timer. • A E icon appears in the shooting display when the selftimer is enabled. • Press the shutter-release button all the way down to start the timer; the self-timer lamp will begin to flash. The lamp stops flashing two seconds before the timer expires. D Taking Multiple Shots The - Nikon Z 50 | Reference Manual - Page 175
The Sub-Selector Use the sub-selector to choose the focus point. The center of the sub-selector can also be used to lock exposure and focus. Focus-Point Selection The sub-selector can be used to choose the focus point when an option other than [Auto-area AF], [Auto-area AF (people)], and [Auto-area - Nikon Z 50 | Reference Manual - Page 176
Locking Focus and Exposure 1 Position the subject in the selected focus point and press the shutter-release button halfway to set focus and exposure. 2 Press the center of the sub- selector. • Focus and exposure will lock while pressing the center of the subselector. Exposure will not change even - Nikon Z 50 | Reference Manual - Page 177
3 Keeping the center of the sub- selector pressed, recompose the photograph and shoot. Do not change the distance between the camera and the subject. If the distance to the subject changes, release the lock and focus again at the new distance. D Locking Focus When AF-S Is Selected for Focus Mode - Nikon Z 50 | Reference Manual - Page 178
The i Menu The i Menu This menu is used for quick access to frequently-used settings. To view the menu, press the i button. • Highlight items using the multi selector and press J to view options. Highlight the desired option and press J to select and return to the i menu. • To cancel and return to - Nikon Z 50 | Reference Manual - Page 179
A The Command Dials • In some cases, the setting for the item currently highlighted in the i menu can be chosen by rotating the main command dial. Options for the selected setting, if any, can be selected by rotating the sub-command dial. • Some items can be adjusted by rotating either dial. • Press - Nikon Z 50 | Reference Manual - Page 180
Still Images 1 3 5 7 9 11 246 1 Set Picture Control (0139) 2 White balance (0145) 3 Image quality (0152) 4 Image size (0154) 5 Flash mode (0156) 6 Metering (0157) 8 10 12 7 Wi-Fi connection (0158) 8 View memory card info (0 159) 9 Release mode (0160) 10 Vibration reduction (0161) 11 AF-area mode ( - Nikon Z 50 | Reference Manual - Page 181
Set Picture Control Choose image processing ("Picture Control") options for new photos according to the scene or your creative intent. Option Description n [Auto] • The camera automatically adjusts hues and tones based on the [Standard] Picture Control. • The complexions of portrait subjects - Nikon Z 50 | Reference Manual - Page 182
Option Description • Creative Picture Controls offer unique combinations of hue, tone, saturation, and [Creative other settings tuned for particular effects. k01- k20 Picture Control] (Creative • Choose the type from [Dream], [Morning], [Pop], [Sunday], [Somber], [Dramatic], Picture Control - Nikon Z 50 | Reference Manual - Page 183
❚❚ Modifying Picture Controls Highlighting [Set Picture Control] in the i menu and pressing J displays a Picture Control list. Highlight a Picture Control and press 3 to preview the effect in the display. • Press 1 or 3 to highlight settings. Press 4 or 2 to choose a value in increments of 1, or - Nikon Z 50 | Reference Manual - Page 184
D The j Indicator The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. D [A] (Auto) • Selecting the A (auto) option available for some settings lets the camera adjust the setting automatically. • Results vary with exposure and the - Nikon Z 50 | Reference Manual - Page 185
❚❚ Picture Control Settings Option Description [Effect level] Mute or heighten the effect of Creative Picture Controls. [Quick sharp] Quickly adjust levels for balanced [Sharpening], [Mid-range sharpening], and [Clarity]. These parameters can also be adjusted individually. [Sharpening] - Nikon Z 50 | Reference Manual - Page 186
D Mid-Range Sharpening In the case of movies, the value selected for mid-range sharpening applies only to footage recorded with either [3840×2160; 60p] or [3840×2160; 50p] selected for [Frame size/frame rate] or [High quality] selected for [Movie quality] in the movie shooting menu. D [Filter - Nikon Z 50 | Reference Manual - Page 187
[Cool-white fluorescent] [Day white fluorescent] [Daylight fluorescent] [High temp. mercury-vapor] 5 [Flash] K [Choose color temperature] L [Preset manual] • Pressing 3 when 4 [Auto] or I [Fluorescent] is highlighted displays sub-options for the highlighted item. • The option currently selected is - Nikon Z 50 | Reference Manual - Page 188
❚❚ Fine-Tuning White Balance Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. If an option other than K [Choose color temperature] is highlighted, fine-tuning options can be displayed by pressing 3. Any changes to fine-tuning options can be - Nikon Z 50 | Reference Manual - Page 189
❚❚ Choosing a Color Temperature Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. When K [Choose color temperature] is highlighted, color temperature options can be viewed by pressing 3. Value for Amber-Blue axis Value for Green- Magenta axis • - Nikon Z 50 | Reference Manual - Page 190
source used in the final photograph. The camera can store up to six values for preset manual white balance. 1 Select [White balance] in the i menu, then highlight L [Preset manual] and press 3. 2 Select a preset. • Select from presets [d-1] through [d-6]. • Press J to save changes and return to the - Nikon Z 50 | Reference Manual - Page 191
3 Highlight [White balance] in the i menu and hold the J button to initiate direct measurement mode. • A L indicator will flash in the shooting display and control panel. • The white balance target (r) appears in the center of the frame. Still Images 149 - Nikon Z 50 | Reference Manual - Page 192
4 Position the white balance target (r) over a white or gray object and measure a value for preset manual white balance. • Position the target (r) using the multi selector. • To measure white balance, press the shutter-release button all the way down or press J. • You - Nikon Z 50 | Reference Manual - Page 193
5200 K, equivalent to the H [Direct sunlight] white balance option. • White balance presets can be viewed by selecting [White balance] > L [Preset manual] in the photo shooting menu. To recall a stored value, highlight a preset using the multi selector and press J. D Direct Measurement Mode Direct - Nikon Z 50 | Reference Manual - Page 194
Image Quality Choose a file format for photographs. Option Description [NEF (RAW) + JPEG • Record two copies of each photo: an NEF (RAW) finem] image and a JPEG copy. [NEF (RAW) + JPEG fine] [NEF (RAW) + JPEG normalm] [NEF (RAW) + JPEG normal] [NEF (RAW) + JPEG basicm] [NEF (RAW) + JPEG basic] - Nikon Z 50 | Reference Manual - Page 195
A NEF (RAW) • NEF (RAW) image files contain the raw data output from the image sensor. They have the extension "*.nef". • Using Nikon's ViewNX-i or Capture NX-D software, you can adjust and re-adjust settings such as exposure compensation and white balance. Such adjustments can be performed as often - Nikon Z 50 | Reference Manual - Page 196
Image Size Choose the size at which photographs are recorded. Option Description NEF (RAW) [Large] [Medium] [Small] Choose the size for photos recorded in NEF (RAW) format. The NEF (RAW) option is available only when an NEF (RAW) option is selected for [Image quality]. JPEG [Large] [Medium] - Nikon Z 50 | Reference Manual - Page 197
❚❚ Image Size Versus Number of Pixels The physical dimensions of the photos in pixels vary with the option selected for [Choose image area] in the photo shooting menu. Z 7II: Image area [FX (36×24)] [DX (24×16)] [5:4 (30×24)] [1:1 (24×24)] [16:9 (36×20)] Large 8256 × 5504 5408 × 3600 6880 × 5504 - Nikon Z 50 | Reference Manual - Page 198
Flash Mode Choose a flash mode for optional flash units. The options available vary with the shooting mode. Option I [Fill flash] J [Red-eye reduction] L [Slow sync] K [Slow sync + red-eye] M [Rear-curtain sync] s [Flash off] Available in b, P, S, A, M b, P, S, A, M P, A P, A P, S, A, M b, P, S, - Nikon Z 50 | Reference Manual - Page 199
Metering Metering determines how the camera sets exposure. Option L [Matrix metering] [CenterM weighted metering] N [Spot metering] Description The camera meters a wide area of the frame and sets exposure according to tone distribution, color, composition, and distance for results close to - Nikon Z 50 | Reference Manual - Page 200
Option [Highlightt weighted metering] Description The camera assigns the greatest weight to highlights. Use this option to reduce loss of detail in highlights, for example when photographing spotlit performers on stage. The option currently selected is shown in the display during shooting. Wi-Fi - Nikon Z 50 | Reference Manual - Page 201
View Memory Card Info View the slot currently selected as the destination for new pictures and options used to record pictures when two memory cards are inserted. This option can be used to view but not to change the option selected. • The options used to record pictures when two memory cards are - Nikon Z 50 | Reference Manual - Page 202
Release Mode Choose the operation performed when the shutter is released. For more information, see "The c/E (Release Mode/Self-Timer) Button" (0125). Option U [Single frame] V [Continuous L] W [Continuous H] Option X [Continuous H (extended)] E [Self-timer] • Pressing 3 when [Continuous L] is - Nikon Z 50 | Reference Manual - Page 203
Vibration Reduction Choose whether to enable vibration reduction. The options available vary with the lens. Option [On] C [Normal] D [Sport] E [Off] Description Choose for enhanced vibration reduction when photographing static subjects. Choose when photographing athletes and other subjects that - Nikon Z 50 | Reference Manual - Page 204
. • To prevent unintended results, select [Off] when the camera is mounted on a tripod. Note that settings for VR lenses may differ; consult the lens manual for more information. Note, however, that [Normal], [Sport], or [On] is recommended if the tripod head is unsecured or the camera is mounted on - Nikon Z 50 | Reference Manual - Page 205
AF-Area Mode AF-area mode controls how the camera selects the focus-point for autofocus. For more information, see "Focus" under "AF-Area Mode" in "Basic Settings" (077). Option 3 [Pinpoint AF] d [Single-point AF] e [Dynamic-area AF] f [Wide-area AF (S)] g [Wide-area AF (L)] Option 1 [Wide-area AF - Nikon Z 50 | Reference Manual - Page 206
Focus Mode Focus mode controls how the camera focuses. For more information, see "Focus" under "Focus Mode" in "Basic Settings" (0 74). Option AF-S [Single AF] AF-C [Continuous AF] MF [Manual Focus] The option currently selected is shown in the display during shooting. 164 Still Images - Nikon Z 50 | Reference Manual - Page 207
Movies 1 3 5 7 9 11 246 1 Set Picture Control (0167) 2 White balance (0167) 3 Frame size and rate/image quality (0168) 4 Microphone sensitivity (0 174) 5 Choose image area (0175) 8 10 12 6 Metering (0177) 7 Wi-Fi connection (0177) 8 Destination (0177) 9 Electronic VR (0178) 10 Vibration reduction - Nikon Z 50 | Reference Manual - Page 208
A [Same as Photo Settings] If [Same as photo settings] is selected for [Set Picture Control], [White balance], [Active D-Lighting], or [Vibration reduction] in the movie shooting menu, a h icon will appear at the top left corner of the i menu. Changes made to the setting from the i menu in photo - Nikon Z 50 | Reference Manual - Page 209
Set Picture Control Choose a Picture Control for movie recording. For more information, see "Still Images" (0139). White Balance Adjust white balance for movie recording. For more information, see "Still Images" (0145). Movies 167 - Nikon Z 50 | Reference Manual - Page 210
from [High quality] and [Normal]. A star ("m") appears in the icon for [Frame size/frame rate] when [High quality] is selected. Some frame size/rate options support both settings, while others support only [High quality] or only [Normal]. 168 Movies - Nikon Z 50 | Reference Manual - Page 211
❚❚ Frame Size/Frame Rate The maximum bit rate and recording time for each [Frame size/ frame rate] option are shown below. The bit rate varies with the option selected for movie quality. Option 1 Max. bit rate Max. High quality recording Normal time 4 [3840×2160; 60p] (Z 7II only) 2, 3, 4 - Nikon Z 50 | Reference Manual - Page 212
1 The frame rates for 120p, 100p, 60p, 50p, 30p, 25p, and 24p are respectively 119.88 fps, 100 fps, 59.94 fps, 50 fps, 29.97 fps, 25 fps, and 23.976 fps. 2 Movies are recorded in 4K UHD. 3 The frame rate selected for [Frame size/frame rate] differs from the rate displayed in the monitor during - Nikon Z 50 | Reference Manual - Page 213
The option currently selected for [Frame size/frame rate] is shown in the display during shooting. D 3840 × 2160; 60p and 3840 × 2160; 50p (Z 7II Only) When 3840 × 2160; 60p or 3840 × 2160; 50p is selected for frame size/ frame rate: • Image area is fixed at [FX]. The actual crop, however, is - Nikon Z 50 | Reference Manual - Page 214
❚❚ Slow-Motion Movies To record slow-motion movies, select [1920×1080; 30p ×4 (slow-motion)], [1920×1080; 25p ×4 (slow-motion)], or [1920×1080; 24p ×5 (slow-motion)] for [Frame size/frame rate]. Sound is not recorded. • Movies shot using [1920×1080; 30p ×4 (slow-motion)], for example, are recorded - Nikon Z 50 | Reference Manual - Page 215
D Slow-Motion Movies Features that cannot be used during slow-motion movie recording include: • flicker reduction, • electronic vibration reduction, and • timecode output Movies 173 - Nikon Z 50 | Reference Manual - Page 216
microphone sensitivity. Option Description bA Adjust microphone sensitivity automatically. [Microphone off] Turn sound recording off. b1 - b20 Select microphone sensitivity manually. Choose from values of from [1] to [20]. The higher the value, the higher the sensitivity; the lower the value - Nikon Z 50 | Reference Manual - Page 217
Choose Image Area Choose the size of the area on the image sensor used to record movies (the "movie crop"). The options are [FX] and [DX]. Select [FX] to shoot movies in what is referred to as "FX-based movie format", [DX] to shoot in "DX-based movie format". The differences between the two formats - Nikon Z 50 | Reference Manual - Page 218
• The sizes of the areas recorded in FX- and DX-based movie formats differ. The differences are shown below. Format FX-based movie format Frame size 3840 × 2160 (60p/50p) 3840 × 2160 (30p/25p/24p) Area recorded Z 7II: approx. 33.4 × 18.8 mm/ 1.3 × 0.7 in. Z 6II: - Z 7II: approx. 35.9 × 20.2 mm/ - Nikon Z 50 | Reference Manual - Page 219
Metering Choose how the camera sets exposure during movie recording. For more information, see "Still Images" (0157). D Metering [Spot metering] is not available in movie mode. Wi-Fi Connection Enable or disable Wi-Fi. For more information on Wi-Fi, see "Still Images" (0158). For information on - Nikon Z 50 | Reference Manual - Page 220
Electronic VR Choose whether to enable electronic vibration reduction in movie mode. Option [On] Description • Enable electronic vibration reduction during movie recording. • Note that when [On] is selected, the angle of view will be reduced, slightly increasing the apparent focal length. [Off] - Nikon Z 50 | Reference Manual - Page 221
. For more information, see "Focus" under "Focus Mode" in "Basic Settings" (0 74). Option AF-S [Single AF] AF-C [Continuous AF] Option AF-F [Full-time AF] MF [Manual Focus] Movies 179 - Nikon Z 50 | Reference Manual - Page 222
Playback Viewing Pictures Full-Frame Playback Press the K button to view the most recent picture full frame in the display. • Press 4 to return to the previous frame, 2 to skip to the next frame. • Press 1, 3, or the DISP button to view more information on the current picture (0183). 180 Viewing - Nikon Z 50 | Reference Manual - Page 223
Thumbnail Playback To view multiple pictures, press the W (Q) button when a picture is displayed full frame. • The number of pictures displayed increases from 4 to 9 to 72 each time the W (Q) button is pressed, and decreases with each press of the X button. • Highlight pictures using 1, 3, 4, or 2. - Nikon Z 50 | Reference Manual - Page 224
D Touch Controls Touch controls can be used when pictures are displayed in the monitor (0 20). D Rotate Tall To display "tall" (portrait-orientation) photographs in tall orientation, select [On] for [Rotate tall] in the playback menu. D Image Review When [On] is selected for [Image review] in the - Nikon Z 50 | Reference Manual - Page 225
Photo Information Photo information is superimposed on images displayed in fullframe playback. Press 1, 3, or the DISP button to cycle through photo information as shown below. 1 File information 2 Exposure data 1 3 Highlight display 1 4 RGB histogram 1 5 Shooting data 1, 2 6 Location data 3 7 - Nikon Z 50 | Reference Manual - Page 226
File Information 123 4 5 14 13 12 11 10 9 6 87 1 Protect status (0104) 2 Retouch indicator (0502) 3 Upload marking (0197) 4 Focus point * (056) 5 Frame number/total number of frames 6 Image quality (0152) 7 Image size (0154) 8 Image area (0260) 9 Time of recording (0456) 10 Date of recording ( - Nikon Z 50 | Reference Manual - Page 227
Exposure Data 12 34 5 6 7 1 Current card slot 2 Folder number-frame number (0 250) 3 Shooting mode (0106) 4 Shutter speed (0108, 109) 5 Aperture (0108, 109) 6 Exposure compensation value (0 122) 7 ISO sensitivity * (0118) * Displayed in red if the picture was taken in mode P, S, A, or M with auto - Nikon Z 50 | Reference Manual - Page 228
2 3 1 Folder number-frame number 4 (0 250) 5 2 Current card slot 6 3 White balance (094, 145, 267) 7 Color temperature (0147) Preset manual (0148) White balance fine-tuning (0 146) 4 Histogram (RGB channel) 5 Histogram (red channel) 6 Histogram (green channel) 7 Histogram (blue channel - Nikon Z 50 | Reference Manual - Page 229
pictures in the monitor. D The Histogram Display • RGB histograms show tone distribution. • Camera histograms may differ from those displayed in imaging applications. Use them as a guide to actual tone distribution. Photo Information 187 - Nikon Z 50 | Reference Manual - Page 230
Shooting Data View the settings in effect at the time the picture was taken. The shooting data list has multiple pages, which can be viewed by pressing 1 or 3. ❚❚ Basic Shooting Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Metering (0157) Shutter type (0398) Shutter speed (0108, 109) Aperture (0108, - Nikon Z 50 | Reference Manual - Page 231
❚❚ Flash Data Flash data are displayed only for pictures taken with optional flash units (0611, 629). 1 1 Flash type 2 2 Remote flash control 3 3 Flash mode (0619) 4 4 Flash control mode (0616) Flash compensation (0622) ❚❚ Picture Control Data The items displayed vary with the Picture - Nikon Z 50 | Reference Manual - Page 232
❚❚ Other Shooting Data 1 2 3 4 5 6 1 High ISO noise reduction (0 286) Long exposure noise reduction (0285) 2 Active D-Lighting (0283) 3 HDR exposure differential (0 319) HDR smoothing (0319) 4 Vignette control (0287) 5 Retouch history (0502). Changes are listed in the order applied. 6 Image comment - Nikon Z 50 | Reference Manual - Page 233
Location Data The location data page lists the latitude, longitude, and other location data downloaded from smartphones, tablets, or optional GPS devices. • The items listed vary with the device supplying the location data. • The location data displayed with movies are those reported at the start of - Nikon Z 50 | Reference Manual - Page 234
Picture Control (0139, 275) 9 Color space (0282) 10 Flash mode 2 (0619) 11 White balance (094, 145, 267) Color temperature (0147) Preset manual (0148) White balance fine-tuning (0 146) 12 Flash compensation 2 (0622) Commander mode 2 13 Exposure compensation value (0 122) 1 Displayed in red if the - Nikon Z 50 | Reference Manual - Page 235
The i Button (Playback Mode) Pressing the i button during playback zoom or full-frame or thumbnail playback displays the i menu for playback mode. Highlight items and press J or 2 to select. Press the i button again to return to playback. Photos Option [Quick crop] 1 [Rating] [Select to send to - Nikon Z 50 | Reference Manual - Page 236
Option [Retouch] [Jump to copy on other card] [Choose slot and folder] [Protect] [Unprotect all] 2 [Side-by-side comparison] 3 Description Create a retouched copy of the current picture (0 502). If the current picture is one of a pair created with [Backup] or [RAW primary - JPEG secondary] selected - Nikon Z 50 | Reference Manual - Page 237
A [Side-by-Side Comparison] Choose [Side-by-side comparison] to compare retouched copies with the unretouched originals. 1 Options used to create copy 1 2 Source image 2 3 3 Retouched copy • The source image is displayed on the left, the retouched copy on the right. • The options used to - Nikon Z 50 | Reference Manual - Page 238
Movies Option [Rating] [Select to send to computer] [Select to send (WT)] [Volume control] [Trim movie] [Choose slot and folder] [Protect] [Unprotect all] Description Rate the current picture (0102). Select the current picture for upload (0197). Adjust playback volume. Trim footage from the - Nikon Z 50 | Reference Manual - Page 239
❚❚ Select to Send Follow the steps below to select the current picture for upload to a smart device or computer. • The i menu items used to select pictures for upload vary with the type of device connected: - [Select to send to smart device]: Displayed when the camera is connected to a smart device - Nikon Z 50 | Reference Manual - Page 240
1 Select the desired picture and press the i button. 2 Highlight [Select to send to smart device], [Select to send to computer], or [Select to send (WT)] and press J. The picture will be marked with a W icon. D Removing Upload Marking To remove upload marking, repeat Steps 1 and 2. 198 The i Button - Nikon Z 50 | Reference Manual - Page 241
❚❚ Choose Start/End Point Trim footage from the current movie and save the edited copy in a new file. 1 Display a movie full frame. 2 Pause the movie on the new opening frame. • Press the J button to start playback movies. Press 3 to pause. • Your approximate position in the movie can be ascertained - Nikon Z 50 | Reference Manual - Page 242
4 Choose the start point. To create a copy that begins from the current frame, highlight [Start point] and press J. 5 Confirm the new start point. • If the desired frame is not currently displayed, press 4 or 2 to advance or rewind. • Rotate the main command dial one stop to skip ahead or back 10 s. - Nikon Z 50 | Reference Manual - Page 243
6 Choose the end point. Press the center of the sub-selector to switch to the end-point selection tool (x) and then select the closing frame (x) as described in Step 5. 7 Press 1 to create the copy. 8 Preview the copy. • To preview the copy, highlight [Preview] and press J (to interrupt the preview - Nikon Z 50 | Reference Manual - Page 244
9 Choose a save option. • Choose [Save as new file] and press the J button to save the edited copy as a new file. • To replace the original movie with the edited copy, highlight [Overwrite existing file], press J, and then highlight [Yes] and press J. D Trimming Movies • The copy will not be saved - Nikon Z 50 | Reference Manual - Page 245
❚❚ Save Current Frame Save a selected frame as a JPEG still. 1 Pause the movie on the desired frame. • Press 3 to pause playback. • Press 4 or 2 to locate the desired frame. 2 Choose [Save current frame]. Press the i button, then highlight [Save current frame] and press J to create a JPEG copy of - Nikon Z 50 | Reference Manual - Page 246
Playback Zoom Press X or J to zoom in on photos displayed in full-frame playback. The maximum zoom factors for [FX (36×24)] format photos are approximately: Z 7II: 32× ([Large]), 24× ([Medium]), and 16× ([Small]) Z 6II: 24× ([Large]), 18× ([Medium]), and 12× ([Small]) Using Playback Zoom To - Nikon Z 50 | Reference Manual - Page 247
frame. Select faces Faces detected during zoom are indicated by white borders in the navigation window. Rotate the subcommand dial or tap the onscreen guide to view other faces. View other pictures Rotate the main command dial to view the same location in other photos without changing the zoom - Nikon Z 50 | Reference Manual - Page 248
Deleting Pictures Follow the steps below to delete pictures from memory cards. Note that pictures cannot be recovered once deleted. Pictures that are protected, however, cannot be deleted. Using the Delete Button Press the O button to delete the current picture. 1 Select the desired picture with the - Nikon Z 50 | Reference Manual - Page 249
A Deleting Copies If the picture selected in the playback display when the O button is pressed was recorded with two memory cards inserted and [Backup] or [RAW primary - JPEG secondary] selected for [Secondary slot function], you will be prompted to choose whether to delete both copies or only the - Nikon Z 50 | Reference Manual - Page 250
Deleting Multiple Pictures Use [Delete] in the playback menu to delete multiple pictures at once. Note that depending on the number of images, some time may be required for deletion. Option Q [Selected images] i [Images shot on selected dates] R [All images] Description Delete selected - Nikon Z 50 | Reference Manual - Page 251
❚❚ Deleting Selected Pictures 1 Select pictures. • Highlight pictures using the multi selector and press the W (Q) button to select; selected pictures are marked with O icons. Selected pictures can be deselected by pressing the W (Q) button again. • Repeat until all the desired pictures are selected - Nikon Z 50 | Reference Manual - Page 252
❚❚ Images Shot on Selected Dates 1 Select dates. • Highlight dates using the multi selector and press 2 to select; selected dates are marked with M icons. Selected dates can be deselected by pressing 2 again. • Repeat until you have selected all the desired dates. 2 Delete the pictures. • Press J; a - Nikon Z 50 | Reference Manual - Page 253
❚❚ Deleting All Pictures 1 Choose a memory card. Press 1 or 3 to highlight the slot containing the memory card from which the pictures will be deleted and press J. 2 Delete the pictures. • A confirmation dialog will be displayed showing the name of the folder containing the photos to be deleted. - Nikon Z 50 | Reference Manual - Page 254
Menu Guide Defaults The defaults for the playback, photo shooting, movie shooting, Custom Settings, and setup menus are listed below. Playback Menu Defaults Playback menu option [Delete] [ - Nikon Z 50 | Reference Manual - Page 255
Playback menu option [Slide show] [Image type] [Frame interval] [Rating] Default Still images and movies 2 s - Photo Shooting Menu Defaults Photo shooting menu option Default [Reset photo shooting menu] - [Storage folder] [Rename] Z 7II: NZ7_2 Z 6II: NZ6_2 [Select folder by number] 100 [ - Nikon Z 50 | Reference Manual - Page 256
sensitivity control] [Maximum sensitivity] [Maximum sensitivity with c] [Minimum shutter speed] [White balance] [Fine-tune] [Choose color temperature] [Preset manual] [Set Picture Control] [Manage Picture Control] [Color space] [Active D-Lighting] [Long exposure NR] [High ISO NR] [Vignette control - Nikon Z 50 | Reference Manual - Page 257
Photo shooting menu option [Flash control] [Flash control mode] [Wireless flash options] [Remote flash control] [Flash mode] [Flash compensation] [Focus mode] [AF-area mode] [Vibration reduction] [Auto bracketing] [Auto bracketing set] [Number of shots] [Increment] [Multiple exposure] [Multiple - Nikon Z 50 | Reference Manual - Page 258
Photo shooting menu option [Interval timer shooting] [Choose start day/time] [Interval] [Intervals×shots/interval] [Exposure smoothing] [Silent photography] [Interval priority] [Focus before each shot] [Options] [Starting storage folder] [New folder] [Reset file numbering] [Time-lapse movie] [ - Nikon Z 50 | Reference Manual - Page 259
Photo shooting menu option [Focus shift shooting] [No. of shots] [Focus step width] [Interval until next shot] [First-frame exposure lock] [Silent photography] [Starting storage folder] [New folder] [Reset file numbering] [Silent photography] Default 100 5 0 On On U U Off Movie Shooting Menu - Nikon Z 50 | Reference Manual - Page 260
Movie shooting menu option [White balance] [Fine-tune] [Choose color temperature] [Preset manual] [Set Picture Control] [Manage Picture Control] [Active D-Lighting] [High ISO NR] [Vignette control] [Diffraction compensation] [Auto distortion control] [Flicker reduction] [Metering] [Focus mode] [AF- - Nikon Z 50 | Reference Manual - Page 261
-area AF (people)] [Auto-area AF (animals)] a8 [Focus point wrap-around] a9 [Focus point options] [Manual focus mode] [Dynamic-area AF assist] a10 [Low-light AF] a11 [Built-in AF-assist illuminator] a12 [Manual focus ring in AF mode] Default - Release Focus 3 All points No Shutter/AF-ON M L (cannot - Nikon Z 50 | Reference Manual - Page 262
Custom Settings menu option b1 [EV steps for exposure cntrl] b2 [Easy exposure compensation] b3 [Center-weighted area] b4 [Fine-tune optimal exposure] [Matrix metering] [Center-weighted metering] [Spot metering] [Highlight-weighted metering] c1 [Shutter-release button AE-L] c2 [Self-timer] [Self- - Nikon Z 50 | Reference Manual - Page 263
Custom Settings menu option d7 [Limit selectable image area] [FX (36×24)] [DX (24×16)] [5:4 (30×24)] (Z 7II only) [1:1 (24×24)] [16:9 (36×20)] d8 [File number sequence] d9 [Apply settings to live view] d10 [Framing grid display] d11 [Focus peaking] [Peaking level] [Peaking highlight color] d12 [View - Nikon Z 50 | Reference Manual - Page 264
Custom Settings menu option f1 [Customize i Menu] f2 [Custom controls] [Fn1 button] [Fn2 button] [AF-ON button] [Sub-selector] [Sub-selector center] [Movie record button] [Lens Fn button] [Lens Fn2 button] [Lens control ring] Default Set Picture Control, White balance, Image quality, Image size, - Nikon Z 50 | Reference Manual - Page 265
Custom Settings menu option f3 [OK button] [Shooting mode] [Playback mode] [Zoom on/off] f4 [Shutter spd & aperture lock] [Shutter speed lock] [Aperture lock] f5 [Customize command dials] [Reverse rotation] [Change main/sub] [Menus and playback] [Sub-dial frame advance] f6 [Release button to use - Nikon Z 50 | Reference Manual - Page 266
Custom Settings menu option g1 [Customize i Menu] g2 [Custom controls] [Fn1 button] [Fn2 button] [AF-ON button] [Sub-selector center] [Shutter-release button] [Lens control ring] g3 [OK button] g4 [AF speed] [When to apply] g5 [AF tracking sensitivity] Default Set Picture Control, White balance, - Nikon Z 50 | Reference Manual - Page 267
Custom Settings menu option g6 [Highlight display] [Display pattern] [Highlight display threshold] g7 [Assign MB-N11 buttons] [Fn button] [AF-ON button] Default Off 248 None Same as camera AF-ON button Defaults 225 - Nikon Z 50 | Reference Manual - Page 268
Setup Menu Defaults Setup menu option [Format memory card] [Save user settings] [Reset user settings] [Language] [Time zone and date] [Time zone] [Date and time] [Date format] [Daylight saving time] [Monitor brightness] [Monitor color balance] [Viewfinder brightness] [Viewfinder color balance] [ - Nikon Z 50 | Reference Manual - Page 269
Setup menu option [AF fine-tuning options] [AF fine-tune on/off] [Fine-tune and save lens] [Default] [List saved values] [Non-CPU lens data] [Lens number] [Focal length (mm)] [Maximum aperture] [Save focus position] [Clean image sensor] [Automatic cleaning] [Image Dust Off ref photo] [Pixel mapping] - Nikon Z 50 | Reference Manual - Page 270
Setup menu option [HDMI] [Output resolution] [Advanced] [Output range] [External recording control] [Output data depth] [N-Log/HDR (HLG) output options] [View assist] [Location data] [Standby timer] [Position] [Set clock from satellite] [Wireless remote (WR) options] [LED lamp] [Link mode] [Assign - Nikon Z 50 | Reference Manual - Page 271
Setup menu option [Connect to smart device] [Pairing (Bluetooth)] [Bluetooth connection] [Select to send (Bluetooth)] [Auto select to send] [Wi-Fi connection] [Send while off] [Location data (smart device)] [Latitude] [Longitude] [Altitude] [UTC] [Connect to PC] [Wi-Fi connection] [Network settings] - Nikon Z 50 | Reference Manual - Page 272
Setup menu option [Wireless transmitter (WT-7)] [Wireless transmitter] [Choose hardware] [Network settings] [Options] [Auto send] [Delete after send] [Send file as] [Overwrite if same name] [Protect if marked to send] [Send marking] [Send folder] [Deselect all?] [HTTP user settings] [Battery info] [ - Nikon Z 50 | Reference Manual - Page 273
Setup menu option [Conformity marking] [Battery info] [USB power delivery] [Energy saving (photo mode)] [Slot empty release lock] [Save/load menu settings] [Reset all settings] [Firmware version] Default - - Enable Disable Enable release - - - Defaults 231 - Nikon Z 50 | Reference Manual - Page 274
D The Playback Menu: Managing Images To display the playback menu, select the D (playback menu) tab in the camera menus. The playback menu contains the following items: Item 0 Item 0 [Delete] 233 [After delete] 236 [Playback folder] 234 [After burst, show] 237 [Playback display options] - Nikon Z 50 | Reference Manual - Page 275
Delete G button U D playback menu Delete multiple images. For more information, see "Deleting Multiple Pictures" (0208). Option Q [Selected images] i [Images shot on selected dates] R [All images] Description Delete selected pictures. Delete all pictures taken on selected dates. Delete all - Nikon Z 50 | Reference Manual - Page 276
Playback Folder G button U D playback menu Choose a folder for playback. Option (Folder name) [All] [Current] Description Pictures in all folders with the selected name will be visible during playback. Folders can be renamed using the [Storage folder] > [Rename] option in the photo shooting menu - Nikon Z 50 | Reference Manual - Page 277
Dual-Format Recording PB Slot G button U D playback menu Choose the slot from which dual-format pictures recorded with [RAW primary - JPEG secondary] selected for [Secondary slot function] in the photo shooting menu are played back. Image Review G button U D playback menu Choose whether pictures - Nikon Z 50 | Reference Manual - Page 278
After Delete G button U D playback menu Choose the picture displayed after an image is deleted. Option S [Show next] T [Show previous] U [Continue as before] Description • The following picture is displayed. • If the deleted image was the last picture, the preceding picture will be displayed - Nikon Z 50 | Reference Manual - Page 279
After Burst, Show G button U D playback menu Choose whether the photo displayed immediately after a burst of shots is taken in continuous mode is the first or last shot in the burst. • This option takes effect only when [Off] is selected for [Image review] in the playback menu. 1 DSC_0001.jpg - Nikon Z 50 | Reference Manual - Page 280
Copy Image(s) G button U D playback menu Copy pictures from one memory card to another when two memory cards are inserted. Option Description [Select source] Choose the card from which pictures will be copied. [Select image(s)] Select pictures to be copied. [Select destination Select the - Nikon Z 50 | Reference Manual - Page 281
3 Choose [Select image(s)]. Highlight [Select image(s)] and press 2 to view the [Select image(s)] display. 4 Select the source folder. • Highlight the folder containing the images to be copied and press 2 to select the highlighted folder and display the [Images selected by default] menu. • To copy - Nikon Z 50 | Reference Manual - Page 282
5 Make the initial selection. Choose the pictures that will be selected by default. Option [Deselect all] [Select all images] [Select protected images] Description None of the pictures in the chosen folder will be selected by default. • Choose this option when you want to select pictures - Nikon Z 50 | Reference Manual - Page 283
6 Select additional images. • Highlight pictures and press the W (Q) button to select; selected pictures are marked with a L. To deselect the current picture, press the W (Q) button again; the L will no longer be displayed. • To view the highlighted picture full screen, press and hold the X button. - Nikon Z 50 | Reference Manual - Page 284
8 Choose a destination folder. Choose one of the following options and press 2. Option [Select folder by number] [Select folder from list] Description Enter the number of the destination folder (0252). If the folder with the selected number does not already exist, a new folder will be created. - Nikon Z 50 | Reference Manual - Page 285
9 Select the folder. After entering a folder number or highlighting the folder name, press J to select the folder and return to the [Copy image(s)] menu. 10 Choose [Copy image(s)?]. Highlight [Copy image(s)?] and press J to display a confirmation dialog. 11 Choose [Yes]. • The camera will display - Nikon Z 50 | Reference Manual - Page 286
D Copying Pictures • Pictures will not be copied if there is insufficient space on the destination card. • If the destination folder contains a file with the same name as one of the pictures to be copied, a confirmation dialog will be displayed. Select [Replace existing image] or [Replace all] to - Nikon Z 50 | Reference Manual - Page 287
Slide Show G button U D playback menu View a slide show; pictures are displayed in the order recorded. The pictures in the folder currently selected for [Playback folder] (0234) will be displayed one-by-one in the order recorded. Option [Start] [Image type] [Frame interval] Description Start the - Nikon Z 50 | Reference Manual - Page 288
Viewing Slide Shows To start the slide show, highlight [Start] and press J. The following operations can be performed while the show is in progress: To Description Skip back/skip Press 4 to return to the previous frame, 2 to skip to ahead the next frame. View additional Press 1 or 3 to choose - Nikon Z 50 | Reference Manual - Page 289
A dialog is displayed when the show ends. To restart, highlight [Restart] and press J. To end the show, highlight [Exit] and press J. Rating G button U D playback menu Rate pictures. • Highlight pictures using the multi selector 4 or 2. • Press 1 or 3 to choose a rating of from zero to five stars - Nikon Z 50 | Reference Manual - Page 290
C The Photo Shooting Menu: Shooting Options To view the photo shooting menu, select the C tab in the camera menus. The photo shooting menu contains the following items: Item 0 Item 0 [Reset photo shooting menu] [Storage folder] [File naming] [Primary slot selection] [Secondary slot function] [ - Nikon Z 50 | Reference Manual - Page 291
Item 0 Item 0 [Multiple exposure] 309 [Time-lapse movie] 340 [HDR (high dynamic range)] 319 [Focus shift shooting] 352 [Interval timer shooting] 326 [Silent photography] 362 D See Also "Photo Shooting Menu Defaults" (0213) Reset Photo Shooting Menu G button U C photo shooting menu Restore - Nikon Z 50 | Reference Manual - Page 292
Storage Folder G button U C photo shooting menu Choose the folder in which subsequent pictures will be stored. 1 Folder 2 Folder number 1 3 Folder name 2 3 Renaming Folders The default folder name, which appears after the folder number, is "NZ7_2" (Z 7II) or "NZ6_2" (Z 6II). To change the - Nikon Z 50 | Reference Manual - Page 293
D Text Entry A keyboard is displayed when text entry is required. • Tap letters on the screen to insert them at the current cursor position. You can also enter characters by highlighting them with the multi selector and pressing J. 1 Text display area 1 2 Keyboard area 2 • To move the cursor to a - Nikon Z 50 | Reference Manual - Page 294
Select Folder by Number The folder in which subsequent pictures will be stored can be selected by number. If a folder with the specified number does not already exist, a new folder will be created. 1 Choose [Select folder by number]. • Highlight [Select folder by number] and press 2 to display the [ - Nikon Z 50 | Reference Manual - Page 295
3 Save changes and exit. • If a folder with the selected number already exists, a W, X, or Y icon will be displayed to the left of the folder number. Press J to complete the operation and return to the main menu; if you chose a folder marked W or X, it will be selected as the folder for new pictures - Nikon Z 50 | Reference Manual - Page 296
Select Folder from List To choose from a list of existing folders: 1 Choose [Select folder from list]. Highlight [Select folder from list] and press 2 to display the [Select folder from list] dialog. 2 Highlight a folder. Press 1 or 3 to highlight a folder. 3 Select the highlighted folder. • Press J - Nikon Z 50 | Reference Manual - Page 297
D Folder and File Numbers • Once the folder number has reached 999, the camera will stop creating new folders automatically and disable the shutter release if: - the current folder contains 5000 pictures (in addition, movie recording will be disabled if the camera calculates that the number of files - Nikon Z 50 | Reference Manual - Page 298
File Naming G button U C photo shooting menu Pictures are saved using file names consisting of "DSC_" followed by a four-digit number and a three-letter extension. [File naming] is used to select three letters to replace the "DSC" portion of the file name. For information on text entry, see "Text - Nikon Z 50 | Reference Manual - Page 299
Primary Slot Selection G button U C photo shooting menu Choose the slot that serves as the primary slot when memory cards are inserted in both the CFexpress/XQD and SD memory card slots. Option [CFexpress/ XQD card slot] [SD card slot] Description The CFexpress/XQD memory card slot serves as the - Nikon Z 50 | Reference Manual - Page 300
Secondary Slot Function G button U C photo shooting menu Choose the role played by the card in the secondary slot when two memory cards are inserted in the camera. Option Description P [Overflow] The card in the secondary slot is used only when the card in the primary slot is full. Q [Backup] - Nikon Z 50 | Reference Manual - Page 301
A [Backup] and [RAW primary - JPEG secondary] The shutter release is disabled when either card is full. A Viewing Dual-Format Photos • Use the [Dual-format recording PB slot] item in the playback menu to choose the slot from which dual-format photos are played back. • When viewing dual-format photos - Nikon Z 50 | Reference Manual - Page 302
Choose Image Area G button U C photo shooting menu The camera offers a choice of the following image areas: Option c [FX (36×24)] a [DX (24×16)] b [5:4 (30×24)] m [1:1 (24×24)] Z [16:9 (36×20)] Description Record pictures in FX format with an angle of view equivalent to a 35 mm format camera. Use - Nikon Z 50 | Reference Manual - Page 303
Image Size G button U C photo shooting menu Choose the size, in pixels, of pictures recorded with the camera. Select [JPEG] to choose the size of JPEG images, [NEF (RAW)] to choose the size of NEF (RAW) images. Note that image size varies with the option selected for image area. Z 7II: Image area - Nikon Z 50 | Reference Manual - Page 304
Image area [5:4 (30×24)] [1:1 (24×24)] [16:9 (36×20)] Image size Large (6880 × 5504 pixels) Medium (5152 × 4120 pixels) Small (3440 × 2752 pixels) Large (5504 × 5504 pixels) Medium (4128 × 4128 pixels) Small (2752 × 2752 pixels) Large (8256 × 4640 pixels) Medium (6192 × 3480 pixels) Small (4128 × - Nikon Z 50 | Reference Manual - Page 305
Z 6II: Image area [FX (36×24)] [DX (24×16)] [1:1 (24×24)] [16:9 (36×20)] Image size Large (6048 × 4024 pixels) Medium (4528 × 3016 pixels) Small (3024 × 2016 pixels) Large (3936 × 2624 pixels) Medium (2944 × 1968 pixels) Small (1968 × 1312 pixels) Large (4016 × 4016 pixels) Medium (3008 × 3008 - Nikon Z 50 | Reference Manual - Page 306
NEF (RAW) Recording G button U C photo shooting menu Choose a compression type and bit depth for NEF (RAW) photographs. NEF (RAW) Compression Option Description N [Lossless compressed] NEF pictures are compressed using a reversible algorithm. The resulting files are about 60% to 80% the size - Nikon Z 50 | Reference Manual - Page 307
) and above ISO 25600 by about 0.3, 0.5, 0.7, 1, and 2 EV (ISO 102400 equivalent). Z 6II: Choose from settings of ISO 100 to 51200; the camera also supports settings below ISO 100 by about 0.3, 0.5, 0.7, and 1 EV (ISO 50 equivalent) and above ISO 51200 by about 0.3, 0.5, 0.7, 1, and 2 EV (ISO 204800 - Nikon Z 50 | Reference Manual - Page 308
Option [Auto ISO sensitivity control] Description Highlight [On] and press J to enable auto ISO sensitivity control. If [Off] is selected, [ISO sensitivity] will remain fixed at the value selected by the user. The following options are available when [On] is selected. • [Maximum sensitivity]: - Nikon Z 50 | Reference Manual - Page 309
] in the photo shooting menu, highlight the desired option, and press 2 as often as necessary to display finetuning options. For information on fine-tuning L [Preset manual] white balance, see "Fine-Tuning Preset Manual White Balance" (0 274). C The Photo Shooting Menu: Shooting Options 267 - Nikon Z 50 | Reference Manual - Page 310
2 Fine-tune white balance. • The multi selector can be used to move the cursor up to six steps from the center of the grid along either of the A (amber)-B (blue) and G (green)-M (magenta) axes. The selected value is displayed to the right of the grid. • The A (amber)-B (blue) axis corresponds to - Nikon Z 50 | Reference Manual - Page 311
D White Balance Fine-Tuning The colors on the fine-tuning axes are relative, not absolute. Selecting more of a color on a given axis does not necessarily result in that color appearing in pictures. For example, moving the cursor to B (blue) when a "warm" setting such as J [Incandescent] is selected - Nikon Z 50 | Reference Manual - Page 312
The White Balance Menu: Choosing a Color Temperature Choose a color temperature by entering values for the A (amber)-B (blue) and G (green)-M (magenta) axes. 1 Select [White balance] in the photo shooting menu, then highlight K [Choose color temperature] and press 2. 2 Choose a color temperature. • - Nikon Z 50 | Reference Manual - Page 313
3 Save changes. • Press J to save changes and exit to the menus. • If a value other than 0 is selected for the green (G)-magenta (M) axis, an asterisk ("U") will appear in the icon. D Color-Temperature Selection • Do not use color-temperature selection with fluorescent light sources; instead, use - Nikon Z 50 | Reference Manual - Page 314
to selected presets. For information on measuring new values for preset manual white balance, see "Preset Manual" (0 148). 1 Select [White balance] in the photo shooting menu, then highlight L [Preset manual] and press 2. 2 Select a destination. • Using the multi selector, highlight the destination - Nikon Z 50 | Reference Manual - Page 315
4 Highlight the source image. • Use the multi selector to highlight the desired picture. • To view the highlighted picture full screen, press and hold the X button. 5 Copy white balance. • Press J to copy the white balance value for the highlighted photograph to the selected preset. • If the - Nikon Z 50 | Reference Manual - Page 316
to 36 characters for the current white-balance preset, select [Edit comment] in the preset manual white balance menu. D "Protect" To protect the current white-balance preset, select [Protect] in the preset manual white balance menu. Highlight [On] and press J; the current white balance preset is now - Nikon Z 50 | Reference Manual - Page 317
Set Picture Control G button U C photo shooting menu Choose image processing ("Picture Control") options for new photos according to the scene or your creative intent. For more information, see "The i Menu" under "Set Picture Control" (0 139). Modifying Picture Controls from the Menus Existing - Nikon Z 50 | Reference Manual - Page 318
2 Edit the selected Picture Control. • Press 1 or 3 to highlight the desired setting (0143). Press 4 or 2 to choose a value in increments of 1, or rotate the sub-command dial to choose a value in increments of 0.25. • The options available vary with the Picture Control selected. • To quickly adjust - Nikon Z 50 | Reference Manual - Page 319
D The i Menu • To select Picture Controls in the i menu, highlight [Set Picture Control] and press J. • Press 4 and 2 to choose a Picture Control and press 3 to display Picture Control settings. The effect of any changes can be previewed in the display. D Manage Picture Control Modifications to - Nikon Z 50 | Reference Manual - Page 320
Manage Picture Control G button U C photo shooting menu Save modified Picture Controls as custom Picture Controls. Option [Save/edit] [Rename] [Delete] [Load/save] Description Create a new custom Picture Control based on an existing preset or custom Picture Control, or edit existing custom - Nikon Z 50 | Reference Manual - Page 321
2 Select a Picture Control. • Highlight an existing Picture Control and press 2 to display edit options. • To save a copy of the highlighted Picture Control without further modification, press J. [Save as] options will be displayed; proceed to Step 4. 3 Edit the selected Picture Control. • The - Nikon Z 50 | Reference Manual - Page 322
5 Name the Picture Control. • Pressing 2 when a destination is highlighted in the previous step displays the [Rename] text-entry dialog. • By default, new Picture Controls are named by adding a two-digit number to the name of the existing Picture Control. The two-digit number is assigned - Nikon Z 50 | Reference Manual - Page 323
D Custom Picture Control Options The options available with custom Picture Controls are the same as those on which the custom Picture Control was based. D Load/Save The [Load/save] item in the [Manage Picture Control] menu can be used to copy custom Picture Controls from the camera to a memory card. - Nikon Z 50 | Reference Manual - Page 324
this camera. Results cannot be guaranteed with third-party software. D Adobe RGB For accurate color reproduction, Adobe RGB images require applications, displays, and printers that support color management. 282 C The Photo Shooting Menu: Shooting Options - Nikon Z 50 | Reference Manual - Page 325
Active D-Lighting G button U C photo shooting menu Preserve details in highlights and shadows, creating pictures with natural contrast. Use for high-contrast scenes, for example when photographing brightly-lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny - Nikon Z 50 | Reference Manual - Page 326
The option currently selected is shown in the display during shooting. D Active D-Lighting • "Noise" in the form of randomly-spaced bright pixels, fog, or lines may appear in photos taken with Active D-Lighting. • In mode M, [Y Auto] is equivalent to [Q Normal]. • Uneven shading may be visible with - Nikon Z 50 | Reference Manual - Page 327
Long Exposure NR G button U C photo shooting menu Reduce "noise" (bright spots or fog) in photographs taken at slow shutter speeds. Option [On] [Off] Description Reduce noise in photographs taken at shutter speeds slower than 1 s. Long-exposure noise reduction disabled. Long-exposure noise - Nikon Z 50 | Reference Manual - Page 328
High ISO NR G button U C photo shooting menu Photographs taken at high ISO sensitivities can be processed to reduce "noise" (randomly-spaced bright pixels). Option [High] [Normal] [Low] [Off] Description Reduce noise in photographs taken at all ISO sensitivities. The higher the sensitivity, the - Nikon Z 50 | Reference Manual - Page 329
Vignette Control G button U C photo shooting menu Vignette control reduces "vignetting"-a drop in brightness at the edges of a photograph-by an amount that varies from lens to lens. Its effects are most noticeable at maximum aperture. Option e [High] g [Normal] f [Low] [Off] Description Choose - Nikon Z 50 | Reference Manual - Page 330
Diffraction Compensation G button U C photo shooting menu Select [On] to reduce diffraction at small apertures (high f-numbers). Auto Distortion Control G button U C photo shooting menu Select [On] as required to reduce barrel distortion when shooting with wide-angle lenses and to reduce pin-cushion - Nikon Z 50 | Reference Manual - Page 331
Flicker Reduction Shooting G button U C photo shooting menu When [On] is selected, reduce the effects of flicker from such light sources as fluorescent or mercury-vapor lamps. • Flicker can cause uneven exposure or (in photographs taken in continuous release modes) inconsistent exposure or - Nikon Z 50 | Reference Manual - Page 332
D [Flicker Reduction Shooting] in the Photo Shooting Menu: Restrictions The [Flicker reduction shooting] item in the photo shooting menu does not take effect under some conditions, including when: • [Continuous H (extended)] is selected for release mode • [On] is selected for [Silent photography] in - Nikon Z 50 | Reference Manual - Page 333
Flash Control G button U C photo shooting menu Adjust settings for wireless remote flash units or optional flash units mounted on the camera accessory shoe. • For information on adjusting settings for optional flash units mounted on the camera accessory shoe, see "OnCamera Flash Photography" (0611 - Nikon Z 50 | Reference Manual - Page 334
to an auto external flash sensor and flash output adjusted automatically. [Distancepriority manual] Choose the distance to the subject; flash output will be adjusted automatically. [Manual] Choose the flash level manually. [Repeating flash] The flash fires repeatedly while the shutter is open - Nikon Z 50 | Reference Manual - Page 335
Wireless Flash Options Adjust settings for simultaneous wireless control of multiple remote flash units. This option is available only when an SB-5000 or SB-500 flash unit or a WR-R10 wireless remote controller is mounted on the camera. Option Description Y [Optical AWL] The remote flash units - Nikon Z 50 | Reference Manual - Page 336
group of remote flash units (0636, 646). [Quick wireless Choose the balance between groups A and B and control] adjust output for group C manually (0639, 649). [Remote repeating] The flash units fire repeatedly while the shutter is open, producing a multiple-exposure effect (0642, 652). Radio - Nikon Z 50 | Reference Manual - Page 337
Flash Mode G button U C photo shooting menu Choose a flash mode for optional flash units. For more information, see "On-Camera Flash Photography" under "Flash Modes" (0619). Flash Compensation G button U C photo shooting menu Adjust flash output to control the brightness of the main subject - Nikon Z 50 | Reference Manual - Page 338
AF-Area Mode G button U C photo shooting menu Choose how the camera selects the focus point for autofocus. For more information, see "Focus" under "AF-Area Mode" in "Basic Settings" (077). Vibration Reduction G button U C photo shooting menu Choose whether to enable vibration reduction. For more - Nikon Z 50 | Reference Manual - Page 339
Auto Bracketing G button U C photo shooting menu Vary exposure, flash level, Active D-Lighting (ADL), or white balance slightly with each shot, "bracketing" the current value. Bracketing can be used in situations in which getting the right settings is difficult and there is not time to check - Nikon Z 50 | Reference Manual - Page 340
Exposure and Flash Bracketing No exposure compensation Exposure modified by: Exposure modified by: -1 EV +1 EV 1 Select [AE & flash bracketing], [AE bracketing], or [Flash bracketing] for [Auto bracketing set]. [Number of shots] and [Increment] options will be displayed. 2 Choose the number of - Nikon Z 50 | Reference Manual - Page 341
3 Select an exposure increment. • Highlight [Increment] and press 4 or 2 to choose the bracketing increment. • When [1/3 step] is selected for Custom Setting b1 [EV steps for exposure cntrl], the size of the increment can be chosen from 0.3 (1/3), 0.7 (2/3), 1.0, 2.0, and 3.0 EV. Bracketing programs - Nikon Z 50 | Reference Manual - Page 342
4 Take pictures. • Take the number of pictures in the bracketing program. • The modified values for shutter speed and aperture are shown in the display. • While bracketing is in effect, the display shows a bracketing icon, a bracketing progress indicator, and the number of shots remaining in the - Nikon Z 50 | Reference Manual - Page 343
bracketing] to vary only exposure, [Flash bracketing] to vary only flash level. Note that flash bracketing is available in i-TTL and, where supported, auto aperture (qA) flash control modes only (0615, 693). D Exposure and Flash Bracketing • In continuous release modes, shooting will pause after the - Nikon Z 50 | Reference Manual - Page 344
D Exposure Bracketing The settings (shutter speed and/or aperture) altered during exposure bracketing vary with the shooting mode. Mode Setting P Shutter speed and aperture1 S Aperture1 A Shutter speed1 M Shutter speed2, 3 1 If [On] is selected for [ISO sensitivity settings] > [Auto - Nikon Z 50 | Reference Manual - Page 345
White Balance Bracketing 1 Select [WB bracketing] for [Auto bracketing set]. [Number of shots] and [Increment] options will be displayed. 2 Choose the number of shots. • Highlight [Number of shots] and press 4 or 2 to choose the number of shots in the bracketing sequence. • At settings other than [ - Nikon Z 50 | Reference Manual - Page 346
3 Select a white balance increment. • Highlight [Increment] and press 4 or 2 to choose the bracketing increment. • The size of the increment can be chosen from 1 (1 step), 2 (2 steps), or 3 (3 steps). • Each step is equivalent to 5 mired. Higher "A" values correspond to increased amounts of amber. - Nikon Z 50 | Reference Manual - Page 347
4 Take pictures. • Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. • Modifications to white balance are added to the white balance adjustment made with white balance fine-tuning. • If the number of - Nikon Z 50 | Reference Manual - Page 348
ADL Bracketing 1 Select [ADL bracketing] for [Auto bracketing set]. [Number of shots] and [Amount] options will be displayed. 2 Choose the number of shots. • Highlight [Number of shots] and press 4 or 2 to choose the number of shots in the bracketing sequence. • At settings other than [0F], a - Nikon Z 50 | Reference Manual - Page 349
3 If you selected 2 shots, choose the Active D-Lighting amount. • When the number of shots is 2, the Active D-Lighting setting for the second shot can be selected by highlighting [Amount] and pressing 4 or 2. • The following options are available. [Amount] OFF L OFF N OFF H OFF H+ OFF AUTO - Nikon Z 50 | Reference Manual - Page 350
D ADL Bracketing • In continuous release modes, shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed. • If the camera is turned off before all shots in the sequence have been taken, - Nikon Z 50 | Reference Manual - Page 351
Multiple Exposure G button U C photo shooting menu Record two to ten NEF (RAW) exposures as a single photograph. Option [Multiple exposure mode] [Number of shots] Description • [On (series)]: Take a series of multiple exposures. To end multiple exposure photography, select [Multiple exposure mode - Nikon Z 50 | Reference Manual - Page 352
Option [Overlay mode] Description • [Add]: The exposures are overlaid without modification; gain is not adjusted. • [Average]: Gain is adjusted before the exposures are overlaid. The gain for each exposure is equal to 1 divided by the total number of exposures taken. For example, in a photo made by - Nikon Z 50 | Reference Manual - Page 353
Option [Overlay shooting] [Select first exposure (NEF)] Description • [On]: Earlier exposures are superimposed on the view through the lens. The earlier exposures aid composition of the next shot. • [Off]: Earlier exposures are not displayed while shooting is in progress. Choose the first exposure - Nikon Z 50 | Reference Manual - Page 354
Creating a Multiple Exposure 1 Highlight [Multiple exposure] in the photo shooting menu and press 2. 2 Choose an option for [Multiple exposure mode]. • Highlight [Multiple exposure mode] and press 2. • Highlight a multiple exposure mode using 1 or 3 and press J. • If [On (series)] or [On (single - Nikon Z 50 | Reference Manual - Page 355
4 Choose an option for [Overlay mode]. • Highlight [Overlay mode] and press 2. • Highlight an option using 1 or 3 and press J. 5 Choose a setting for [Save individual images (NEF)]. • Highlight [Save individual images (NEF)] and press 2. • Highlight an option using 1 or 3 and press J. • To save both - Nikon Z 50 | Reference Manual - Page 356
or 3 and press J. • Select [On] to superimpose earlier exposures on the view through the lens. You can use the earlier exposures as a guide when composing subsequent shots. 7 Choose an option for [Select first exposure (NEF)]. • To choose the first exposure from existing NEF (RAW) photos, highlight - Nikon Z 50 | Reference Manual - Page 357
8 Start shooting. • Take the selected number of shots. If you used [Select first exposure (NEF)] to select an existing NEF (RAW) image as the first exposure in Step 7, shooting will start from the second exposure. • Once you have taken the selected number of shots, the pictures will be overlaid to - Nikon Z 50 | Reference Manual - Page 358
❚❚ The i Menu Pictures can be viewed by pressing the K button while a multiple exposure is in progress. The most recent shot in the current multiple exposure is indicated by a $ icon; pressing the i button when this icon is present displays the multiple exposure i menu. • Highlight items and press - Nikon Z 50 | Reference Manual - Page 359
D Multiple Exposure • If you use the menus or view pictures in the display while shooting a multiple exposure, remember that shooting will end and the multiple exposure will be recorded if no operations are performed for about 40 seconds (or in the case of menus, about 90 seconds). The time - Nikon Z 50 | Reference Manual - Page 360
D Multiple Exposure: Restrictions Multiple exposure cannot be combined with some camera features, including: • modes other than P, S, A, and M, • movie recording, • bracketing, • HDR (high dynamic range), • interval-timer photography, • time-lapse movie recording, and • focus shift ❚❚ Ending - Nikon Z 50 | Reference Manual - Page 361
HDR (High Dynamic Range) G button U C photo shooting menu Used with high contrast subjects, High Dynamic Range (HDR) preserves details in highlights and shadows by combining two shots taken at different exposures. Use with high-contrast scenes and other subjects to preserve a wide range of details, - Nikon Z 50 | Reference Manual - Page 362
Option Description [HDR mode] • [On (series)]: Take a series of HDR photographs. To end HDR photography, select [HDR mode] again and choose [Off]. • [On (single photo)]: Take a single HDR photograph. • [Off]: End HDR photography. [Exposure differential] Choose the difference in exposure between - Nikon Z 50 | Reference Manual - Page 363
Taking HDR Photographs We recommend that you use the matrix metering option when shooting with HDR. 1 Highlight [HDR (high dynamic range)] in the photo shooting menu and press 2. 2 Select an [HDR mode]. • Highlight [HDR mode] and press 2. • Highlight one of the following options using 1 or 3 and - Nikon Z 50 | Reference Manual - Page 364
• If [On (series)] or [On (single photo)] is selected, an icon will appear in the display. 3 Choose a value for [Exposure differential]. • Highlight [Exposure differential] and press 2. • Highlight an option using 1 or 3 and press J. • Choose higher values for highcontrast subjects. • Note, however, - Nikon Z 50 | Reference Manual - Page 365
4 Adjust [Smoothing]. • Highlight [Smoothing] and press 2. • Highlight an option using 1 or 3 and press J; the selected option represents the amount the boundaries between the two images are smoothed. • Higher values produce a smoother composite image. 5 Choose a setting for [Save individual images - Nikon Z 50 | Reference Manual - Page 366
6 Frame the photograph, focus, and shoot. • The camera takes two exposures when the shutter-release button is pressed all the way down. • "Busy" will flash in the control panel while the images are combined. No photographs can be taken until recording is complete. • If [On (series)] is selected for - Nikon Z 50 | Reference Manual - Page 367
D HDR Photography • The edges of the image will be cropped out. • The desired results may not be achieved if the camera or subject moves during shooting. Use of a tripod is recommended. • Depending on the scene, you may notice shadows around bright objects or halos around dark objects. This can be - Nikon Z 50 | Reference Manual - Page 368
Interval Timer Shooting G button U C photo shooting menu Take photographs at the selected interval until the specified number of shots has been recorded. When using the interval timer, select a release mode other than E. Option Description [Start] Start interval timer shooting. Shooting will - Nikon Z 50 | Reference Manual - Page 369
Option [Silent photography] [Interval priority] [Focus before each shot] Description Select [On] to silence the shutter and eliminate the vibrations it produces during shooting. • Selecting [On] does not completely silence the camera. Camera sounds may still be audible, for example during autofocus - Nikon Z 50 | Reference Manual - Page 370
Option Description [Options] Combine interval-timer photography with other options. • [AE bracketing]: Perform exposure bracketing during interval-timer photography. • [Time-lapse movie]: Use the photos taken during interval-timer photography to create a time-lapse movie with an aspect ratio of - Nikon Z 50 | Reference Manual - Page 371
Interval-Timer Photography D Before Shooting • Take a test shot at current settings. • Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date. • To ensure that shooting is not interrupted, use a fully-charged battery, - Nikon Z 50 | Reference Manual - Page 372
2 Adjust interval timer settings. • Choose the start day and time. Highlight [Choose start day/time] and press 2. Highlight an option and press J. - To start shooting immediately, select [Now]. - To start shooting at a chosen date and time, select [Choose day/time]. Choose the date and time and - Nikon Z 50 | Reference Manual - Page 373
• Choose the number of shots per interval. Highlight [Intervals×shots/ interval] and press 2. Choose the number of intervals and the number of shots per interval and press J. - In single frame release mode, the photographs for each interval will be taken at the rate for continuous highspeed - Nikon Z 50 | Reference Manual - Page 374
• Enable or disable silent photography. Highlight [Silent photography] and press 2. Highlight an option and press J. • Choose an interval priority option. Highlight [Interval priority] and press 2. Highlight an option and press J. • Choose whether the camera focuses between shots. Highlight [ - Nikon Z 50 | Reference Manual - Page 375
• Choose additional options. Highlight [Options] and press 2. Highlight [AE bracketing] or [Timelapse movie] and press J. - If you selected [AE bracketing], choose values for [Number of shots] and [Increment]; if you selected [Time-lapse movie], choose settings for [Frame size/ frame rate] and [ - Nikon Z 50 | Reference Manual - Page 376
3 Highlight [Start] and press J. • If [Now] was selected for [Choose start day/time] in Step 2, shooting will start after three seconds. • Otherwise shooting will start at the time selected for [Choose start day/time] > [Choose day/ time]. • The display turns off during shooting. • Shooting will - Nikon Z 50 | Reference Manual - Page 377
❚❚ Pausing Interval-Timer Photography Interval-timer photography can be paused between intervals by pressing J or by selecting [Interval timer shooting] in the photo shooting menu, highlighting [Pause], and pressing J. Note that the menus may not be displayed when the G button is pressed if the time - Nikon Z 50 | Reference Manual - Page 378
❚❚ Ending Interval Timer Shooting To end interval-timer photography before all the photos are taken, select [Interval timer shooting] in the photo shooting menu, highlight [Off], and press J. Note that the menus may not be displayed when the G button is pressed if the time selected for [Interval] is - Nikon Z 50 | Reference Manual - Page 379
D Interval-Timer Photography • Choose an interval longer than the time needed to take the selected number of shots at the predicted shutter speed. Note that during actual interval-timer photography, the camera must not only take shots at the selected interval but must also have sufficient time to - Nikon Z 50 | Reference Manual - Page 380
• If [On] is selected for [Silent photography] or [Time-lapse movie] is selected for [Options], the standby timer will not expire during intervaltimer photography, regardless of the option selected for Custom Setting c3 [Power off delay] > [Standby timer]. • If the memory card is full, the interval - Nikon Z 50 | Reference Manual - Page 381
D Interval-Timer Photography: Restrictions Interval-timer photography cannot be combined with some camera features, including: • movie recording, • long time-exposures ("Bulb" or "Time"), • the self-timer, • bracketing, • HDR (high dynamic range), • multiple exposures, and • focus shift D When [On] - Nikon Z 50 | Reference Manual - Page 382
Time-Lapse Movie G button U C photo shooting menu The camera automatically takes photos at selected intervals to create a time-lapse movie. Option [Start] [Interval] [Shooting time] [Exposure smoothing] [Silent photography] Description Start time-lapse recording. Shooting starts after about 3 s - Nikon Z 50 | Reference Manual - Page 383
Option Description [Choose image Choose the image area for time-lapse movies from [FX] area] and [DX]. [Frame size/ frame rate] Choose the frame size and rate for the final movie. [Interval priority] • [On]: Enable interval priority to ensure that frames shot in modes P and A are taken at - Nikon Z 50 | Reference Manual - Page 384
Recording Time-Lapse Movies D Before Shooting • Time-lapse movies are shot using the movie crop. • Take test shots and check the results in the monitor. • Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date. • To - Nikon Z 50 | Reference Manual - Page 385
2 Adjust time-lapse movie settings. • Choose the interval between shots. Highlight [Interval] and press 2. Choose an interval (in minutes and seconds) and press J. - Choose an interval longer than the slowest anticipated shutter speed. • Choose the total shooting time. Highlight [Shooting time] - Nikon Z 50 | Reference Manual - Page 386
• Enable or disable exposure smoothing. Highlight [Exposure smoothing] and press 2. Highlight an option and press J. - Selecting [On] smooths abrupt changes in exposure. • Enable or disable silent photography. Highlight [Silent photography] and press 2. • Choose the image area. Highlight an - Nikon Z 50 | Reference Manual - Page 387
• Choose the frame size and rate. Highlight [Frame size/ frame rate] and press 2. Highlight an option and press J. • Choose an interval priority option. Highlight [Interval priority] and press 2. Highlight an option and press J. C The Photo Shooting Menu: Shooting Options 345 - Nikon Z 50 | Reference Manual - Page 388
• Choose whether the camera focuses between shots. Highlight [Focus before each shot] and press 2. Highlight an option and press J. - If [On] is selected for [Focus before each shot], the camera will focus before each shot according to the option currently selected for focus mode. • Choose a - Nikon Z 50 | Reference Manual - Page 389
3 Highlight [Start] and press J. • Shooting starts after about 3 s. • The display turns off during shooting. • The camera takes pictures at interval selected for [Interval] for the time selected for [Shooting time] in Step 2. ❚❚ Ending Shooting To end shooting before all the photos are taken, press - Nikon Z 50 | Reference Manual - Page 390
D Calculating the Length of the Final Movie • The total number of frames in the final movie can be calculated by dividing the shooting time selected in Step 2 by the interval, rounding up, and adding 1. • The length of the final movie can then be calculated by dividing the number of shots by the - Nikon Z 50 | Reference Manual - Page 391
D Time-Lapse Movies • Sound is not recorded with time-lapse movies. • The shutter speed and the time needed to record the image to the memory card may vary from shot to shot. As a result, the interval between a shot being recorded and the start of the next shot may vary. • Shooting will not begin if - Nikon Z 50 | Reference Manual - Page 392
D During Shooting During shooting, the time-lapse recording indicator will be displayed in the control panel. The memory card access lamp will light. D Adjusting Settings Between Shots Shooting and menu settings can be adjusted between shots. Note, however, that the monitor will turn off - Nikon Z 50 | Reference Manual - Page 393
D When [On] Is Selected for [Silent Photography] Selecting [On] for [Silent photography] disables some camera features, including: • ISO sensitivities of Hi 0.3 through Hi 2.0, • flash photography, • exposure delay mode, • long-exposure noise reduction, and • flicker reduction. C The Photo Shooting - Nikon Z 50 | Reference Manual - Page 394
Focus Shift Shooting G button U C photo shooting menu Focus shift automatically varies focus over a series of shots. Use it to take photos that will later be combined using focus stacking to create a single image with increased depth of field. Before using focus shift, choose a focus mode of AF-S - Nikon Z 50 | Reference Manual - Page 395
Option Description [Silent photography] Select [On] to eliminate shutter sounds during shooting. • Selecting [On] does not completely silence the camera. Camera sounds may still be audible, for example during autofocus or aperture adjustment, in the latter case most noticeably at apertures - Nikon Z 50 | Reference Manual - Page 396
Focus Shift Photography D Before Shooting • Take a test shot at current settings. • To ensure that shooting is not interrupted, use a fully-charged battery, a charging AC adapter (available separately for the Z 6II, supplied with the Z 7II), or an optional AC adapter and power connector. 1 Focus. • - Nikon Z 50 | Reference Manual - Page 397
3 Adjust focus shift settings. • Choose the number of shots. Highlight [No. of shots] and press 2. Choose the number of shots and press J. - The maximum number of shots is 300. - We recommend taking more shots than you think you'll need. You can winnow them down during focus stacking. - More - Nikon Z 50 | Reference Manual - Page 398
• Choose the amount the focus distance changes with each shot. Highlight [Focus step width] and press 2. Choose a focus step width and press J. - Press 4 to reduce the focus step width, 2 to increase. - Note that high settings increase the risk that some areas will be out of focus when the shots - Nikon Z 50 | Reference Manual - Page 399
• Choose the interval until next shot. Highlight [Interval until next shot] and press 2. Choose the interval between shots and press J. - Choose the interval between shots, in seconds. - Select [00] to take photos at up to about 5 fps. - To ensure correct exposure when using a flash, choose an - Nikon Z 50 | Reference Manual - Page 400
• Enable or disable first-frame exposure lock. Highlight [First-frame exposure lock] and press 2. Highlight an option and press J. - [Off] is recommended if lighting and other conditions will not change during shooting, [On] when photographing landscapes and the like under variable lighting. - - Nikon Z 50 | Reference Manual - Page 401
• Choose starting folder options. Highlight [Starting storage folder] and press 2. Select the desired options and press J to proceed. - Highlight either of the following options and press 2 to select; selected items are marked with a check (M). To deselect (remove the check from: U) a selected - Nikon Z 50 | Reference Manual - Page 402
❚❚ Ending Focus Shift Photography To end shooting before all shots have been taken, either: • select [Focus shift shooting] in the photo shooting menu, highlight [Off], and press J, or • press the shutter-release button halfway or press the J button between shots. D Aperture Given that pictures shot - Nikon Z 50 | Reference Manual - Page 403
D Focus Shift Photography: Restrictions Focus-shift photography cannot be combined with some camera features, including: • movie recording, • long time-exposures ("Bulb" or "Time"), • the self-timer, • bracketing, • HDR (high dynamic range), • multiple exposures, • interval-timer photography, and • - Nikon Z 50 | Reference Manual - Page 404
Silent Photography G button U C photo shooting menu Eliminate shutter sounds during shooting (0100). Option [On] [Off] Description Eliminate vibrations produced by the shutter. Use for landscapes, still lifes, and other static subjects. Use of a tripod is recommended. • Selecting [On] for [Silent - Nikon Z 50 | Reference Manual - Page 405
1 The Movie Shooting Menu: Movie Shooting Options To view the movie shooting menu, select the 1 tab in the camera menus. The movie shooting menu contains the following items: Item 0 Item 0 [Reset movie shooting menu] [File naming] [Destination] [Choose image area] [Frame size/frame rate] [ - Nikon Z 50 | Reference Manual - Page 406
D See Also "Movie Shooting Menu Defaults" (0217). Reset Movie Shooting Menu G button U 1 movie shooting menu Highlight [Yes] and press J to restore movie shooting menu options to their default values (0217). File Naming G button U 1 movie shooting menu Choose the three-letter prefix used in - Nikon Z 50 | Reference Manual - Page 407
Choose Image Area G button U 1 movie shooting menu Choose a movie crop (image area) from FX or DX. Frame Size/Frame Rate G button U 1 movie shooting menu Choose the movie frame size (in pixels) and frame rate. For more information, see "The i Menu" under "Frame Size and Rate/ Image Quality" (0168). - Nikon Z 50 | Reference Manual - Page 408
ISO Sensitivity Settings G button U 1 movie shooting menu Adjust the following ISO sensitivity settings for use in movie mode. Option [Maximum sensitivity] [Auto ISO control (mode M)] [ISO sensitivity (mode M)] Description • Choose the upper limit for auto ISO sensitivity control from values - Nikon Z 50 | Reference Manual - Page 409
White Balance G button U 1 movie shooting menu Choose the white balance for movies. Select [Same as photo settings] to use the option currently selected for photos (0 267). Set Picture Control G button U 1 movie shooting menu Choose a Picture Control for movies. Select [Same as photo settings] to - Nikon Z 50 | Reference Manual - Page 410
Active D-Lighting G button U 1 movie shooting menu Preserve details in highlights and shadows, creating movies with natural contrast. Select [Same as photo settings] to use the option currently selected for photos (0283). D [Same as photo settings] Note that if [Same as photo settings] is selected - Nikon Z 50 | Reference Manual - Page 411
Vignette Control G button U 1 movie shooting menu Reduce vignetting in movies. Select [Same as photo settings] to use the option currently selected for photos (0287). Diffraction Compensation G button U 1 movie shooting menu Reduce diffraction in movies (0288). Auto Distortion Control G button U 1 - Nikon Z 50 | Reference Manual - Page 412
Flicker Reduction G button U 1 movie shooting menu Reduce flicker and banding when shooting under fluorescent or mercury-vapor lighting during movie recording. Choose [Auto] to allow the camera to automatically choose the correct frequency. If [Auto] fails to produce the desired results, select [50 - Nikon Z 50 | Reference Manual - Page 413
Metering G button U 1 movie shooting menu Choose how the camera meters exposure in movie mode. [Spot metering] is not available in the movie shooting menu (0157). Focus Mode G button U 1 movie shooting menu Choose a focus mode for movie recording (074). AF-Area Mode G button U 1 movie shooting - Nikon Z 50 | Reference Manual - Page 414
in or external microphones on or off or adjust microphone sensitivity. Option Description [Auto] Adjust microphone sensitivity automatically. [Manual] Adjust microphone sensitivity manually. Choose from values of from [1] to [20]. The higher the value, the higher the sensitivity; the lower the - Nikon Z 50 | Reference Manual - Page 415
Attenuator G button U 1 movie shooting menu Select [Enable] to reduce microphone gain and prevent audio distortion when recording movies in loud environments. Frequency Response G button U 1 movie shooting menu Choose the range of frequencies to which built-in and external microphones respond. - Nikon Z 50 | Reference Manual - Page 416
. Selecting [On] for [Wind noise reduction] has no effect on optional stereo microphones. Wind-noise reduction for optional stereo microphones that support this feature can be enabled or disabled using microphone controls. Headphone Volume G button U 1 movie shooting menu Press 1 or 3 to adjust - Nikon Z 50 | Reference Manual - Page 417
with HDMI output)]: Time codes will be included with footage saved to external recorders connected to the camera via an HDMI cable. The camera supports Atomos SHOGUN, NINJA, and SUMO-series Monitor recorders. • [Off]: Time codes are not recorded. • [Record run]: Time codes are incremented only while - Nikon Z 50 | Reference Manual - Page 418
Option [Timecode origin] [Drop frame] Description • [Reset]: Reset the time code to 00:00:00.00. • [Enter manually]: Enter the hour, minute, second, and frame number manually. • [Current time]: Set the time code to the current time as reported by the camera clock. Before proceeding, select [Time - Nikon Z 50 | Reference Manual - Page 419
A Custom Settings: Fine-Tuning Camera Settings To view Custom Settings, select the A tab in the camera menus. Custom Settings are used to customize camera settings to suit individual preferences. The Custom Settings menu is divided into two levels. A Custom Settings: Fine-Tuning Camera Settings 377 - Nikon Z 50 | Reference Manual - Page 420
delay] 395 a8 [Focus point wraparound] 387 a9 [Focus point options] 388 a10 [Low-light AF] 389 a11 [Built-in AF-assist illuminator] 390 a12 [Manual focus ring in AF mode] 2 391 378 A Custom Settings: Fine-Tuning Camera Settings - Nikon Z 50 | Reference Manual - Page 421
Item 0 d [Shooting/display] d1 [CL mode shooting speed] 396 d2 [Max. continuous release] 396 d3 [Sync. release mode options] 397 d4 [Exposure delay mode] 397 d5 [Shutter type] 398 d6 [Extended shutter speeds (M)] 399 d7 [Limit selectable image area] 399 d8 [File number - Nikon Z 50 | Reference Manual - Page 422
Item 0 Item 0 f [Controls] g [Movie] f1 [Customize i menu] 410 g1 [Customize i menu] 440 f2 [Custom controls] 414 g2 [Custom controls] 441 f3 [OK button] 427 g3 [OK button] 448 f4 f5 [Shutter spd & aperture lock] 429 [Customize command dials] 430 g4 [AF speed] g5 [AF tracking - Nikon Z 50 | Reference Manual - Page 423
Reset Custom Settings G button U A Custom Settings menu Restore Custom Settings to their default values. a: Autofocus a1: AF-C Priority Selection G button U A Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-C is selected. Option G [Release] F [Focus] - Nikon Z 50 | Reference Manual - Page 424
a2: AF-S Priority Selection G button U A Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-S is selected. Option G [Release] F [Focus] Description Photos can be taken whenever the shutterrelease button is pressed (release priority). Photos can be taken only - Nikon Z 50 | Reference Manual - Page 425
a4: Focus Points Used G button U A Custom Settings menu Choose the number of focus points available for manual focuspoint selection when an option other than [Auto-area AF], [Auto-area AF (people)], and [Auto-area AF (animals)] is selected for AF-area mode. - Nikon Z 50 | Reference Manual - Page 426
a5: Store Points by Orientation G button U A Custom Settings menu Choose whether separate focus points can be selected for "wide" (landscape) orientation, for "tall" (portrait) orientation with the camera rotated 90° clockwise, and for "tall" orientation with the camera rotated 90° counterclockwise. - Nikon Z 50 | Reference Manual - Page 427
• Select [Yes] to enable separate focus-point selection. Camera rotated 90°counter-clockwise Landscape (wide) orientation Camera rotated 90°clockwise A Custom Settings: Fine-Tuning Camera Settings 385 - Nikon Z 50 | Reference Manual - Page 428
a6: AF Activation G button U A Custom Settings menu Choose whether the shutter-release button can be used to focus. If [AF-ON only] is selected, the camera will not focus when the shutter-release button is pressed halfway. Focus can only be adjusted using the AF-ON button or other controls to which - Nikon Z 50 | Reference Manual - Page 429
a7: Limit AF-Area Mode Selection G button U A Custom Settings menu Choose the AF-area modes that can be selected using the i menu or custom controls. • Highlight either of the following options and press 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via - Nikon Z 50 | Reference Manual - Page 430
Focus Point Options G button U A Custom Settings menu Choose from the focus point display options below. Manual Focus Mode Option [On] [Off] Description The focus point is displayed at all times in manual focus mode. The focus point is displayed only during focus point selection. Dynamic-Area AF - Nikon Z 50 | Reference Manual - Page 431
a10: Low-Light AF G button U A Custom Settings menu Choose [On] for more accurate focus under low-light conditions when AF-S is selected for focus mode. • In photo mode, this option takes effect only in modes P, S, A, and M. • Low-light AF is disabled during interval-timer photography and time-lapse - Nikon Z 50 | Reference Manual - Page 432
a11: Built-in AF-Assist Illuminator G button U A Custom Settings menu Choose whether the built-in AF-assist illuminator lights to assist the focus operation in photo mode when lighting is poor. Option [On] [Off] Description In photo mode, the illuminator will light as required when AF-S is - Nikon Z 50 | Reference Manual - Page 433
mode. Option [Enable] [Disable] Description Autofocus can be over-ridden by rotating the lens focus ring (autofocus with manual override). The focus ring can be used for manual focus while the shutter-release button is pressed halfway. To refocus using autofocus, lift your finger from the shutter - Nikon Z 50 | Reference Manual - Page 434
b: Metering/Exposure b1: EV Steps for Exposure Cntrl G button U A Custom Settings menu Select the increments used for adjustments to shutter speed, aperture, ISO sensitivity, bracketing, and exposure and flash compensation. b2: Easy Exposure Compensation G button U A Custom Settings menu Choose - Nikon Z 50 | Reference Manual - Page 435
b3: Center-Weighted Area G button U A Custom Settings menu When [Center-weighted metering] is selected, the camera assigns the greatest weight to an area in the center of the shooting display when setting exposure. Custom Setting b3 [Center-weighted area] is used to choose the size of the area given - Nikon Z 50 | Reference Manual - Page 436
c: Timers/AE Lock c1: Shutter-Release Button AE-L G button U A Custom Settings menu Choose whether exposure locks when the shutter-release button is pressed. Option Description O [On (half press)] Pressing the shutter-release button halfway locks exposure. P [On (burst mode)] Exposure only - Nikon Z 50 | Reference Manual - Page 437
c3: Power Off Delay G button U A Custom Settings menu Choose how long the monitor or viewfinder remains on when no operations are performed. • Different settings can be chosen for [Playback], [Menus], [Image review], and [Standby timer]. • [Standby timer] determines how long the control panel and - Nikon Z 50 | Reference Manual - Page 438
d: Shooting/Display d1: CL Mode Shooting Speed G button U A Custom Settings menu Choose the frame advance rate for low-speed continuous release mode; options range from [5 fps] to [1 fps]. d2: Max. Continuous Release G button U A Custom Settings menu The maximum number of shots that can be taken in - Nikon Z 50 | Reference Manual - Page 439
d3: Sync. Release Mode Options G button U A Custom Settings menu Choose whether the shutters on the remote cameras are synchronized with the shutter on the master camera when using an optional wireless remote controller. d4: Exposure Delay Mode G button U A Custom Settings menu In situations where - Nikon Z 50 | Reference Manual - Page 440
d5: Shutter Type G button U A Custom Settings menu Choose the type of shutter used for photographs. Option Description O [Auto] The camera chooses the shutter type automatically according to shutter speed. The electronic front-curtain shutter is used to reduce blur caused by camera shake at - Nikon Z 50 | Reference Manual - Page 441
d6: Extended Shutter Speeds (M) G button U A Custom Settings menu Extend the range of shutter speeds available in mode M; the slowest shutter speed available when [On] is selected is 900 s (15 minutes). Extended shutter speeds can be used for pictures of the night sky and other long exposures. • To - Nikon Z 50 | Reference Manual - Page 442
d8: File Number Sequence G button U A Custom Settings menu Choose a file numbering option. Option [On] [Off] [Reset] Description When a new folder is created or a new memory card is inserted in the camera, file numbering will continue from the last number used. This simplifies file management by - Nikon Z 50 | Reference Manual - Page 443
D File Number Sequence • If a picture is taken when the current folder contains a picture numbered 9999, a new folder will be created and file numbering will restart from 0001. • When the current folder number reaches 999, the camera will no longer be able to create new folders and the shutter - Nikon Z 50 | Reference Manual - Page 444
d9: Apply Settings to Live View G button U A Custom Settings menu Choose whether the camera adjusts the preview in the viewfinder or monitor to reflect how shooting settings will affect the hue and brightness of the final picture. Regardless of the option selected, the effects of camera settings - Nikon Z 50 | Reference Manual - Page 445
d11: Focus Peaking G button U A Custom Settings menu When focus peaking is enabled in manual focus mode, objects that are in focus are indicated by colored outlines in the display. You can choose the color. Peaking Level Choose from [3 (high - Nikon Z 50 | Reference Manual - Page 446
select shutter speeds as fast as 1/8000 s. • In modes S and M, the user can select shutter speeds as fast as 1/8000 s when using flash units that support auto FP high-speed sync. Flash sync speed set to selected value, which can be from 1/200 to 1/60 s. 404 A Custom Settings: Fine-Tuning Camera - Nikon Z 50 | Reference Manual - Page 447
the flash sync speed. D Auto FP High-Speed Sync • Auto FP high-speed sync allows the flash to be used at the highest shutter speed supported by the camera. When [1/200 s (Auto FP)] is selected, the camera automatically enables auto FP high-speed sync at shutter speeds faster than the flash - Nikon Z 50 | Reference Manual - Page 448
e2: Flash Shutter Speed G button U A Custom Settings menu Choose the slowest shutter speed available with a flash in mode P or A. Regardless of the setting chosen for Custom Setting e2 [Flash shutter speed], shutter speeds can be as slow as 30 s in modes S and M or at flash settings of slow sync, - Nikon Z 50 | Reference Manual - Page 449
. e5: Modeling Flash G button U A Custom Settings menu If [On] is selected when the camera is used with an optional flash unit that supports the Nikon Creative Lighting system, pressing a control to which [Preview] has been assigned using Custom Setting f2 [Custom controls] will emit a modeling - Nikon Z 50 | Reference Manual - Page 450
e6: Auto Bracketing (Mode M) G button U A Custom Settings menu The settings affected when bracketing is enabled in mode M are determined by the options selected for [Auto bracketing] > [Auto bracketing set] in the photo shooting menu and the option chosen for Custom Setting e6 [Auto bracketing ( - Nikon Z 50 | Reference Manual - Page 451
e7: Bracketing Order G button U A Custom Settings menu Choose the order in which the shots in the bracketing program are taken. Option Description H [MTR > under > over] The unmodified shot is taken first, followed by the shot with the lowest value, followed by the shot with the highest value. - Nikon Z 50 | Reference Manual - Page 452
f: Controls f1: Customize i Menu G button U A Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in photo mode. • Highlight a position in the i menu, press J, and select the desired item. • The following items can be assigned to the i menu. Item 0 - Nikon Z 50 | Reference Manual - Page 453
Item 0 9 [Focus shift shooting] 352 L [Silent photography] 100 v [Release mode] 125 w [Custom controls] 414 z [Exposure delay mode] 397 O [Shutter type] 398 y [Apply settings to live view] 402 Item 0 z [Split-screen display zoom] 412 W [Focus peaking] 403 3 [Monitor/ - Nikon Z 50 | Reference Manual - Page 454
Split-Screen Display Zoom If [Split-screen display zoom] is assigned to the i menu, you can select [Split-screen display zoom] to simultaneously zoom in on two areas that are aligned horizontally but are in different parts of the frame (split-screen display zoom). The locations of the areas are - Nikon Z 50 | Reference Manual - Page 455
Bluetooth Connection Enable or disable Bluetooth. MB-N11 Info View information on the batteries in optional MB-N11 power battery packs connected to the camera (0727). A Custom Settings: Fine-Tuning Camera Settings 413 - Nikon Z 50 | Reference Manual - Page 456
f2: Custom Controls G button U A Custom Settings menu Choose the operations performed in photo mode using camera or lens controls or by pressing camera controls and rotating command dials. • Choose the roles played by the controls below. Highlight the desired control and press J. Control w [Fn1 - Nikon Z 50 | Reference Manual - Page 457
• The roles that can be assigned to these controls are as follows: Option K [Select center focus point] A [AF-ON] F [AF lock only] E [AE lock (Hold)] D [AE lock (Reset on release)] C [AE lock only] B [AE/AF lock] r [FV lock] h [cDisable/enable] q [Preview] L [Matrix metering] M [ - Nikon Z 50 | Reference Manual - Page 458
Option wyV 7 8 z S 3 l n [Subject tracking] 4 4 ---- 4 4 - L [Silent photography] 4 4 b [Live view info display off] 4 4 4 - 4 4 -- - b [Framing grid display] 4 4 -- 4 4 4 4 - p [Zoom on/off] 4 4 4 --4 4 4 - O [MY MENU] 4 4 --- 4 4 4 - 3 [Access top item in MY MENU] 4 4 --- 4 4 4 - Nikon Z 50 | Reference Manual - Page 459
4 ------ - 4 4 ------ - 4 4 -- 4 4 -- - --- 4 ---- - --- 4 41, 2 42 42 42 4 4 4 - 4 4 4 4 42 1 Available with compatible lenses only. 2 Regardless of the option selected, in manual focus mode the control ring can only be used to adjust focus. A Custom Settings: Fine-Tuning Camera Settings 417 - Nikon Z 50 | Reference Manual - Page 460
• The following options are available: Role Description K [Select center focus point] Pressing the control selects the center focus point. A [AF-ON] Pressing the control initiates autofocus, duplicating the function of the AF-ON button. F [AF lock only] Focus locks while the control is - Nikon Z 50 | Reference Manual - Page 461
Role q [Preview] L [Matrix metering] [CenterM weighted metering] N [Spot metering] [Highlightt weighted metering] 1 [Bracketing burst] Description Keep the control pressed to preview photo color, exposure, and depth of field. [Matrix metering] is activated while the control is pressed. [ - Nikon Z 50 | Reference Manual - Page 462
Role c [Sync. release selection] Description When an optional wireless remote controller is connected, the control can be used to toggle between remote release and master or synchronized release. The options available depend on the setting chosen for Custom Setting d3 [Sync. release mode options - Nikon Z 50 | Reference Manual - Page 463
Role 4 [+ NEF (RAW)] n [Subject tracking] b [Framing grid display] L [Silent photography] Description • If a JPEG option is currently selected for image quality, "RAW" will appear in the shooting display and an NEF (RAW) copy will be recorded with the next picture taken after the control is - Nikon Z 50 | Reference Manual - Page 464
Role Description b [Live view info display off] Press the control to hide the indicators in the live view display. Press again to view indicators. Press the control to zoom the display in on the p [Zoom on/off] area around the current focus point. Press again to cancel zoom. O [MY MENU] Press - Nikon Z 50 | Reference Manual - Page 465
Role Description h [Set Picture Control] Press the control and rotate a command dial to choose a Picture Control. y [Active D-Lighting] Press the control and rotate a command dial to adjust Active D-Lighting. w [Metering] Press the control and rotate a command dial to choose a metering - Nikon Z 50 | Reference Manual - Page 466
Role Description [HDR (high 2 dynamic range)] Press the control and rotate the main command dial to choose the mode and the sub-command dial to choose the exposure differential. z [Exposure delay mode] Press the control and rotate a command dial to choose the shutter-release delay. $ [ - Nikon Z 50 | Reference Manual - Page 467
enables focus-point selection. X [Focus (M/A)] Autofocus can be over-ridden by rotating the lens control ring (autofocus with manual override). The control ring can be used for manual focus while the shutter-release button is pressed halfway. To refocus using autofocus, lift your finger from the - Nikon Z 50 | Reference Manual - Page 468
Role Description q [Aperture] Rotate the lens control ring to adjust aperture. E [Exposure Rotate the lens control ring to adjust exposure compensation] compensation. 9 [ISO sensitivity] Rotate the lens control ring to adjust ISO sensitivity. [None] The control has no effect. 426 A - Nikon Z 50 | Reference Manual - Page 469
f3: OK Button G button U A Custom Settings menu Choose the role assigned to the J button in photo mode and during playback. Shooting Mode Regardless of the option selected, when [Auto-area AF], [Autoarea AF (people)], or [Auto-area AF (animals)] is chosen for AF-area mode, the button functions - Nikon Z 50 | Reference Manual - Page 470
Playback Mode Regardless of the option selected, pressing J when a movie is displayed full frame starts movie playback. Role n [Thumbnail on/off] o [View histograms] p [Zoom on/off] u [Choose slot and folder] Description Press J to toggle between full-frame and 4-, 9-, or 72-frame thumbnail - Nikon Z 50 | Reference Manual - Page 471
f4: Shutter Spd & Aperture Lock G button U A Custom Settings menu Selecting [On] for [Shutter speed lock] locks shutter speed at the value currently selected in mode S or M. Selecting [On] for [Aperture lock] locks aperture at the value currently selected in mode A or M. • While shutter speed or - Nikon Z 50 | Reference Manual - Page 472
f5: Customize Command Dials G button U A Custom Settings menu Customize the operation of the main and sub-command dials. • The selected settings also apply to the command dials on optional MB-N11 power battery packs. Reverse Rotation Reverse the direction of rotation of the command dials for - Nikon Z 50 | Reference Manual - Page 473
Change Main/Sub Reverse the roles of the main- and sub-command dials. Option Description [Exposure setting] If [On] is selected, the main command dial will control aperture and the sub-command dial shutter speed. If [On (Mode A)] is selected, the main command dial will be used to set aperture in - Nikon Z 50 | Reference Manual - Page 474
Menus and Playback Choose the roles played by the multi selector and command dials during playback and menu navigation. Option [On] [On (image 2 review excluded)] [Off] Description Playback: • The main command dial can be used to choose the picture displayed during full-frame playback. The sub- - Nikon Z 50 | Reference Manual - Page 475
Sub-Dial Frame Advance Choose the number of frames that can be skipped by rotating the sub-command dial during full-frame playback. This option only takes effect when [On] or [On (image review excluded)] is selected for [Menus and playback]. Option [10 frames] Description Skip forward or back 10 - Nikon Z 50 | Reference Manual - Page 476
f6: Release Button to Use Dial G button U A Custom Settings menu Selecting [Yes] allows adjustments that are normally made by holding a button and rotating a command dial to be made by rotating the command dial after the button is released. This ends when the button is pressed again, the shutter- - Nikon Z 50 | Reference Manual - Page 477
Role I/Y [Flash mode/ compensation] z [Focus mode/AF-area mode] t [Auto bracketing] $ [Multiple exposure] 2 [HDR (high dynamic range)] z [Exposure delay mode] $ [Shutter spd & aperture lock] W [Focus peaking] w [Choose non-CPU lens number] H [Microphone sensitivity] E [Exposure - Nikon Z 50 | Reference Manual - Page 478
[On] to reverse the direction of rotation for focus or control rings on Z mount lenses during manual focus. • This option does not support: - certain Z mount lenses that can only be focused manually, or - F mount lenses connected via an FTZ mount adapter. 436 A Custom Settings: Fine-Tuning Camera - Nikon Z 50 | Reference Manual - Page 479
f9: Assign MB-N11 Buttons G button U A Custom Settings menu Choose the roles played by the controls on optional MB-N11 power battery packs in photo mode. • The controls to which roles can be assigned are listed below. Highlight the desired control and press J. Control [Fn button] [AF-ON button] [ - Nikon Z 50 | Reference Manual - Page 480
Option Fn n [Subject tracking] 4 L [Silent photography] 4 b [Live view info display off] 4 K [Playback] 4 J [Choose image area] 4 w [Metering] 4 I/Y [Flash mode/ compensation] 4 z [Focus mode/AF-area mode] 4 z [Exposure delay mode] 4 $ [Shutter spd & aperture lock] 4 E [ - Nikon Z 50 | Reference Manual - Page 481
Option Fn AF-ON Multi selector K [Select center focus point] - 4 - A [AF-ON] - 4 - F [AF lock only] - 4 - C [AE lock only] - 4 - B [AE/AF lock] - 4 - p [Zoom on/off] - 4 - Y [Same as camera multi selector] - - 4 x [Focus point selection] - - 4 [None] 4 4 - - Nikon Z 50 | Reference Manual - Page 482
g: Movie g1: Customize i Menu G button U A Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in movie mode. • Highlight a position in the i menu, press J, and select the desired item. • The following items can be assigned to the i menu. Item 0 J [ - Nikon Z 50 | Reference Manual - Page 483
g2: Custom Controls G button U A Custom Settings menu Choose the operations performed in movie mode using camera or lens controls or by pressing camera controls and rotating command dials. • Choose the roles played by the controls below. Highlight the desired control and press J. Control w [Fn1 - Nikon Z 50 | Reference Manual - Page 484
• The roles that can be assigned to these controls are as follows: Option wyV 8 G l t [Power aperture (open)] 4 - - - - - q [Power aperture (close)] - 4 - - - - i [Exposure compensation +] 4 ---- - h [Exposure compensation -] - 4 --- - n [Subject tracking] 4 4 --- - b [Live view info - Nikon Z 50 | Reference Manual - Page 485
E [Exposure compensation] - - - - - 42 9 [ISO sensitivity] - - - - - 42 [None] 4 4 4 4 - 42 1 Available with compatible lenses only. 2 Regardless of the option selected, in manual focus mode the control ring can only be used to adjust focus. A Custom Settings: Fine-Tuning Camera Settings 443 - Nikon Z 50 | Reference Manual - Page 486
• The following options are available: Role Description [Power t aperture (open)] Aperture widens while the Fn1 button is pressed. Use in combination with Custom Setting g2 [Custom controls] > [Fn2 button] > [Power aperture (close)] for button-controlled aperture adjustment. [Power q aperture ( - Nikon Z 50 | Reference Manual - Page 487
Role Description b [Live view info display off] Press the control to hide the indicators in the live view display. Press again to view indicators. b [Framing grid display] Press the control to display a framing grid. Press the control again to turn the display off. g [Protect] Press the - Nikon Z 50 | Reference Manual - Page 488
Role Description Press the shutter-release button all the way C [Take photos] down to take a photograph with an aspect ratio of 16:9. 1 [Record movies] Press the control to start recording. Press again to end recording. Press the control and rotate a command dial J [Choose image to choose - Nikon Z 50 | Reference Manual - Page 489
by pressing the selected control. Pressing the control again selects a "no star" rating. X [Focus (M/A)] The lens control ring can be used for manual focus regardless of the option selected for focus mode. To refocus using autofocus, press the shutter-release button halfway or press a control to - Nikon Z 50 | Reference Manual - Page 490
g3: OK Button G button U A Custom Settings menu Choose the role assigned to the J button in movie mode. Regardless of the option selected, the J button can be used for focus tracking (086) when [Auto-area AF], [Auto-area AF (people)], or [Auto-area AF (animals)] is selected for AF-area mode. Role - Nikon Z 50 | Reference Manual - Page 491
g4: AF Speed G button U A Custom Settings menu Choose the focus speed for movie mode. Use [When to apply] to choose when the selected option applies. Option D [Always] E [Only while recording] Description The camera focuses at the selected speed at all times in movie mode. Focus is adjusted - Nikon Z 50 | Reference Manual - Page 492
overexposed. D Highlight Display If both the highlight display and focus peaking are enabled in manual focus mode, only focus peaking will take effect. To view the highlight display in manual focus mode, select [Off] for Custom Setting d11 [Focus peaking] > [Peaking level]. 450 A Custom - Nikon Z 50 | Reference Manual - Page 493
g7: Assign MB-N11 Buttons G button U A Custom Settings menu Choose the roles played by the controls on optional MB-N11 power battery packs in movie mode. • The controls to which roles can be assigned are listed below. Highlight the desired control and press J. Control [Fn button] [AF-ON button] A - Nikon Z 50 | Reference Manual - Page 494
• The roles that can be assigned to these controls are listed below. For information on the listed roles, see the section on Custom Setting g2 [Custom controls]. Option Fn b [Live view info display off] 4 1 [Record movies] 4 E [Exposure compensation] 4 9 [ISO sensitivity] 4 e [Same as - Nikon Z 50 | Reference Manual - Page 495
B The Setup Menu: Camera Setup To view the setup menu, select the B tab in the camera menus. The setup menu contains the following items: Item 0 Item 0 [Format memory card] 455 [AF fine-tuning options] 462 [Save user settings] 455 [Non-CPU lens data] 466 [Reset user settings] 455 [Save - Nikon Z 50 | Reference Manual - Page 496
Item [Location data] * [Wireless remote (WR) options] [Assign remote (WR) Fn button] [Airplane mode] [Connect to smart device] [Connect to PC] [Wireless transmitter (WT-7)] [Conformity marking] 0 Item 0 478 [Battery info] 491 479 [USB power delivery] 492 [Energy saving (photo 482 mode)] 494 - Nikon Z 50 | Reference Manual - Page 497
Format Memory Card G button U B setup menu Format memory cards. To begin formatting, choose a memory card slot and select [Yes]. Note that formatting permanently deletes all pictures and other data on the card. Before formatting, be sure to make backup copies as required. D During Formatting Do not - Nikon Z 50 | Reference Manual - Page 498
Language G button U B setup menu Choose a language for camera menus and messages. The languages available vary with the country or region in which the camera was originally purchased. Time Zone and Date G button U B setup menu Change time zones and set the camera clock. We recommend that the - Nikon Z 50 | Reference Manual - Page 499
Monitor Brightness G button U B setup menu Press 1 or 3 to adjust monitor brightness. Choose higher values for increased brightness, lower values for reduced brightness. • [Monitor brightness] can only be adjusted when the monitor is the active display. It cannot be adjusted when [Viewfinder only] - Nikon Z 50 | Reference Manual - Page 500
Monitor Color Balance G button U B setup menu Adjust monitor color balance to your taste. • [Monitor color balance] can only be adjusted when the monitor is the active display. It cannot be adjusted when [Viewfinder only] is selected for monitor mode or when your eye is to the viewfinder. • Color - Nikon Z 50 | Reference Manual - Page 501
adjusted when the monitor is on or when [Monitor only] is selected for monitor mode. • Higher values increase the drain on the battery. Option [Auto] [Manual] Description Viewfinder brightness is adjusted automatically in response to lighting conditions. Press 1 or 3 to adjust brightness - Nikon Z 50 | Reference Manual - Page 502
menu • Adjust the brightness of the control panel. • Raising control panel brightness increases the drain on the battery. Option [Auto] [Manual] [Off] Description Control panel brightness is adjusted automatically in response to ambient lighting. Press 1 or 3 to adjust control panel brightness - Nikon Z 50 | Reference Manual - Page 503
Limit Monitor Mode Selection G button U B setup menu Choose the monitor modes that can be selected using the M button. • Highlight options and press 2 to select (M) or deselect (U). Options marked with a check (M) are available for selection. • To complete the operation, press J. Information Display - Nikon Z 50 | Reference Manual - Page 504
AF Fine-Tuning Options G button U B setup menu Fine-tune focus for the current lens. • Use only as required. • We recommend that you perform fine-tuning at a focus distance you use frequently. If you perform focus-tuning at a short focus distance, for example, you may find it less effective at - Nikon Z 50 | Reference Manual - Page 505
Option [List saved values] Description List values saved using [Finetune and save lens]. Highlighting a lens in the list and pressing 2 displays a [Choose lens number] dialog. • The [Choose lens number] dialog is used to enter the lens identifier. • In the case of Z mount lenses and some F mount - Nikon Z 50 | Reference Manual - Page 506
Creating and Saving Fine-Tuning Values 1 Attach the lens to the camera. 2 Select [AF fine-tuning options] in the setup menu, then highlight [Fine-tune and save lens] and press 2. An AF fine-tuning dialog will be displayed. 3 Press 4 or 2 to fine-tune autofocus. • Choose from values between +20 and - - Nikon Z 50 | Reference Manual - Page 507
Choosing a Default Fine-Tuning Value 1 Select [AF fine-tuning options] in the setup menu, then highlight [Default] and press 2. 2 Press 4 or 2 to fine-tune autofocus. • Choose from values between +20 and -20. • The current value is shown by g, the previously-selected value by j. • The larger the - Nikon Z 50 | Reference Manual - Page 508
Non-CPU Lens Data G button U B setup menu Record data for non-CPU lenses attached using an optional mount adapter. Recording the focal length and maximum aperture of non-CPU lenses allows them to be used with some camera features normally reserved for CPU lenses, such as onboard vibration - Nikon Z 50 | Reference Manual - Page 509
Clean Image Sensor G button U B setup menu Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the image sensor and affect your photographs. The "clean image sensor" option vibrates the sensor to remove dust. Option [Clean now] [Automatic cleaning] - Nikon Z 50 | Reference Manual - Page 510
Image Dust Off Ref Photo G button U B setup menu Acquire reference data for the Image Dust Off option in Capture NX-D. Image Dust Off processes NEF (RAW) images to mitigate effects caused by dust adhering in front of the camera image sensor. For more information, refer to Capture NX-D online help. - Nikon Z 50 | Reference Manual - Page 511
the display and then press the shutter-release button halfway. • In autofocus mode, focus will automatically be set to infinity. • In manual focus mode, set focus to infinity manually. 3 Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data. • The monitor - Nikon Z 50 | Reference Manual - Page 512
D Image Sensor Cleaning Dust off reference data recorded before image sensor cleaning is performed cannot be used with photographs taken after image sensor cleaning is performed. Select [Clean sensor and then start] only if the Image Dust Off reference data will not be used with existing photographs - Nikon Z 50 | Reference Manual - Page 513
Pixel Mapping G button U B setup menu Pixel mapping checks and optimizes the camera image sensor. If you notice unexpected bright spots appearing in pictures taken with the camera, perform pixel mapping as described below. • Pixel mapping is available only when a Z mount lens or an optional FTZ - Nikon Z 50 | Reference Manual - Page 514
D Pixel Mapping • Do not attempt to operate the camera while pixel mapping is in progress. Do not turn the camera off or remove or disconnect the power source. • Pixel mapping may not be available if the camera's internal temperature is elevated. 472 B The Setup Menu: Camera Setup - Nikon Z 50 | Reference Manual - Page 515
Image Comment G button U B setup menu Add a comment to new photographs as they are taken. Comments can be viewed as metadata in ViewNX-i or Capture NX-D. Input Comment Input a comment of up to 36 characters. Highlight [Input comment] and press 2 to display a text-entry dialog. For information on - Nikon Z 50 | Reference Manual - Page 516
Copyright Information G button U B setup menu Add copyright information to new photographs as they are taken. Copyright information can be viewed as metadata in ViewNX-i or Capture NX-D. Artist/Copyright Enter the names of the photographer (maximum 36 characters) and copyright holder (maximum 54 - Nikon Z 50 | Reference Manual - Page 517
D Copyright Information • To prevent unauthorized use of the artist or copyright holder names, make sure that [Attach copyright information] is not selected before lending or transferring the camera to another person. You will also need to make sure that the artist and copyright fields are blank. • - Nikon Z 50 | Reference Manual - Page 518
Beep Options G button U B setup menu Beep On/Off Turn the beep speaker on or off. • If [On] is selected for [Beep on/off], beeps sound when: - the self-timer counts down, - interval-timer photography, time-lapse movie recording, or focus shift ends, - the camera focuses in photo mode (note that - Nikon Z 50 | Reference Manual - Page 519
Volume Adjust beep volume. Pitch Choose the pitch of the beep from [High] and [Low]. Touch Controls G button U B setup menu Adjust settings for monitor touch controls. Enable/Disable Touch Controls Enable or disable touch controls. Select [Playback only] to enable touch controls in playback mode - Nikon Z 50 | Reference Manual - Page 520
HDMI G button U B setup menu Adjust settings for connection to HDMI devices (0606). Location Data G button U B setup menu Adjust settings for use when the camera is connected to a GPS receiver. Option Description If [Enable] is selected when a GPS receiver is connected, the standby timer - Nikon Z 50 | Reference Manual - Page 521
settings for optional WR-R10 wireless remote controllers. You can also choose a link mode for connection to optional radio-controlled flash units that support Advanced Wireless Lighting. LED Lamp Enable or disable the status LEDs on a WR-R10 wireless remote controller mounted on the camera. For more - Nikon Z 50 | Reference Manual - Page 522
Link Mode Choose a link mode for WR-R10 wireless remote controllers mounted on other cameras or radio-controlled flash units that support Advanced Wireless Lighting. Be sure that the same mode is selected for the other devices. Option Description [Pairing] The camera connects only to devices - Nikon Z 50 | Reference Manual - Page 523
Option [PIN] Description Communication is shared among all devices with the same four-digit PIN. Connect using a four-digit PIN. Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J to enter and display the selected PIN. • This option is a good choice for photography featuring a - Nikon Z 50 | Reference Manual - Page 524
Assign Remote (WR) Fn Button G button U B setup menu Choose the role played by the Fn button on optional wireless remote controllers equipped with an Fn button. See Custom Setting f2 [Custom controls] for more information. Option A [AF-ON] F [AF lock only] D [AE lock (Reset on release)] C [AE lock - Nikon Z 50 | Reference Manual - Page 525
Connect to Smart Device G button U B setup menu Connect to smartphones or tablets (smart devices) via Bluetooth or Wi-Fi. Pairing (Bluetooth) Pair with or connect to smart devices using Bluetooth. Option [Start pairing] [Paired devices] [Bluetooth connection] Description Pair the camera with a - Nikon Z 50 | Reference Manual - Page 526
size and format options are selected with the camera. Photos taken in movie mode will not be uploaded. They must be uploaded manually. [Manual select to Upload selected pictures. Transfer marking send] appears on the selected pictures. [Deselect all] Remove transfer marking from all pictures - Nikon Z 50 | Reference Manual - Page 527
] or [WPA2-PSK-AES]. Choose the camera password. Choose a channel. • Select [Auto] to have the camera choose the channel automatically. • Select [Manual] to choose the channel manually. View current Wi-Fi settings. Select [Yes] to reset Wi-Fi settings to default values. Send While Off If [On] is - Nikon Z 50 | Reference Manual - Page 528
Connect to PC Connect to computers via Wi-Fi. G button U B setup menu Wi-Fi Connection Select [Enable] to connect using the settings currently selected for [Network settings]. Network Settings Select [Create profile] to create a new network profile (0544, 550). • If more than one profile already - Nikon Z 50 | Reference Manual - Page 529
-point mode: Adjust settings for direct wireless connection to the camera. - [SSID]: Choose the camera SSID. - [Channel]: Choose [Auto] or [Manual]. - [Authentication/encryption]: Choose [OPEN] or [WPA2-PSK-AES]. - [Password]: If [WPA2-PSK-AES] is selected for [Authentication/encryption], you can - Nikon Z 50 | Reference Manual - Page 530
Options Adjust upload settings. ❚❚ Auto Send Select [On] to upload new photos as they are taken. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Movies and photos taken during movie mode are not uploaded automatically when - Nikon Z 50 | Reference Manual - Page 531
❚❚ Deselect All? Select [Yes] to remove transfer marking from all images. Upload of images with a "sending" icon will immediately be terminated. MAC Address View the MAC address. B The Setup Menu: Camera Setup 489 - Nikon Z 50 | Reference Manual - Page 532
and turned on. • Information on [Wireless transmitter] can be found below; for information on [Choose hardware], [Network settings], and [Options], see the manual provided with the WT-7. Wireless Transmitter Select [Use] to enable WT-7 when it is connected to the camera. Conformity Marking G button - Nikon Z 50 | Reference Manual - Page 533
shutter has been released. Note that the camera may sometimes release the shutter without recording a photograph, for example when measuring preset manual white balance. D Charging Batteries at Low Temperatures Batteries in general exhibit a drop in capacity at low ambient temperatures. Even fresh - Nikon Z 50 | Reference Manual - Page 534
USB Power Delivery G button U B setup menu Choose whether charging AC adapters (available separately for the Z 6II, supplied with the Z 7II) or computers connected via USB can be used to power the camera (USB power delivery). USB power delivery allows the camera to be used while limiting the drain - Nikon Z 50 | Reference Manual - Page 535
D Computer USB Power Delivery • Before using a computer to supply power to the camera, check that the computer is equipped with a Type C USB connector. Use a UC-E25 USB cable (available separately) to connect the camera to the computer. • Depending on the model and product specifications, some - Nikon Z 50 | Reference Manual - Page 536
Energy Saving (Photo Mode) G button U B setup menu In photo mode, the shooting display will dim to save power approximately 15 seconds before the standby timer expires. Option [Enable] [Disable] Description Enable energy saving. The display refresh rate may drop. Disable energy saving. Note - Nikon Z 50 | Reference Manual - Page 537
Slot Empty Release Lock G button U B setup menu Choose whether the shutter can be released when no memory card is inserted in the camera. Option a [Release locked] b [Enable release] Description The shutter cannot be released when no memory card is inserted. The shutter can be released with - Nikon Z 50 | Reference Manual - Page 538
Save/Load Menu Settings G button U B setup menu Save current camera menu settings to a memory card. You can also load saved settings, allowing menu settings to be shared among cameras of the same model. • If two memory cards are inserted, the settings will be saved to the card in the slot selected - Nikon Z 50 | Reference Manual - Page 539
Settings that can be saved and loaded [File naming] [Primary slot selection] [Secondary slot function] [Choose image area] [Image quality] [Image size] [NEF (RAW) recording] [ISO sensitivity settings] [White balance] [Set Picture Control] (Custom Picture Controls are saved as [Auto]) [ - Nikon Z 50 | Reference Manual - Page 540
Settings that can be saved and loaded [File naming] [Destination] [Choose image area] [Frame size/frame rate] [Movie quality] [Movie file type] [ISO sensitivity settings] [White balance] [Set Picture Control] (Custom Picture Controls are saved as [Auto]) [Active D-Lighting] [High ISO NR] - Nikon Z 50 | Reference Manual - Page 541
Settings that can be saved and loaded CUSTOM SETTING MENU All items [Language] [Time zone and date] (excepting [Date and time]) [Limit monitor mode selection] [Information display] [Non-CPU lens data] [Clean image sensor] [Image comment] [Copyright information] SETUP MENU [Beep options] - Nikon Z 50 | Reference Manual - Page 542
Save Menu Settings Save settings to a memory card. If the card is full, an error will be displayed and settings will not be saved. Saved settings can only be used with other cameras of the same model. Load Menu Settings Load saved settings from a memory card. Note that [Load menu settings] is - Nikon Z 50 | Reference Manual - Page 543
Reset All Settings G button U B setup menu Reset all settings except [Language] and [Time zone and date] to their default values. Copyright information and other usergenerated entries are also reset. Once reset, settings cannot be restored. We recommend that you save settings using the [Save/load - Nikon Z 50 | Reference Manual - Page 544
N The Retouch Menu: Creating Retouched Copies To view the retouch menu, select the N tab in the camera menus. The items in the retouch menu are used to trim or retouch existing pictures. • The retouch menu is only displayed when a memory card containing pictures is inserted in the camera. • - Nikon Z 50 | Reference Manual - Page 545
Creating Retouched Copies 1 Select an item in the retouch menu. Press 1 or 3 to highlight an item, 2 to select. 2 Select a picture. • Highlight a picture using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • Press J to select the highlighted picture. - Nikon Z 50 | Reference Manual - Page 546
D Retouching the Current Picture To create a retouched copy of the current image, press i and select [Retouch]. D Retouch • The camera may not be able to display or retouch images that were taken or retouched using other cameras or that have been retouched on a computer. • If no actions are - Nikon Z 50 | Reference Manual - Page 547
D Image Quality • Copies created from NEF (RAW) pictures are saved at an [Image quality] of [JPEG fine m]. • Copies created from JPEG pictures are the same quality as the original. • In the case of dual-format pictures recorded to the same memory card at image-quality settings of NEF + JPEG, only - Nikon Z 50 | Reference Manual - Page 548
NEF (RAW) Processing: Converting NEF (RAW) to JPEG G button U N retouch menu The process of converting NEF (RAW) images to other formats such as JPEG is referred to as "NEF (RAW) processing". JPEG copies of NEF (RAW) pictures can be created on the camera as described below. 1 Select [NEF (RAW) - Nikon Z 50 | Reference Manual - Page 549
3 Choose how images are selected. Option [Select image(s)] [Select date] [Select folder] Description Create JPEG copies of selected NEF (RAW) images. Multiple NEF (RAW) images can be selected. Create JPEG copies of all NEF (RAW) pictures taken on selected dates. Create JPEG copies of all NEF (RAW) - Nikon Z 50 | Reference Manual - Page 550
5 Select photographs. If you chose [Select image(s)]: • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted image, press the W (Q) button. Selected pictures are marked by a $ icon. To deselect the - Nikon Z 50 | Reference Manual - Page 551
6 Choose settings for the JPEG copies. • The settings in effect when the photograph was taken appear below a preview. • To use the setting in effect when the photograph was taken, if applicable, select [Original]. 1 2 3 4 5 1 Image quality (0260) 2 Image size (0261) 3 White balance (0267) 4 - Nikon Z 50 | Reference Manual - Page 552
7 Copy the photographs. • Highlight [EXE] and press J to create JPEG copies of the selected photographs. • If multiple photos are selected, a confirmation dialog will be displayed after you highlight [EXE] and press J; highlight [Yes] and press J to create JPEG copies of the selected photos. • To - Nikon Z 50 | Reference Manual - Page 553
Trim G button U N retouch menu Create a cropped copy of the selected photograph. The photograph is displayed with the selected crop shown in yellow; create a cropped copy as described below. To Size the crop Change the crop aspect ratio Position the crop Save the crop Description Press X or W - Nikon Z 50 | Reference Manual - Page 554
Resize G button U N retouch menu Create small copies of selected photographs. If two memory cards are inserted, you can choose the card used to store the resized copies. Resizing Multiple Images If you accessed the retouch menu via the G button, you can resize multiple selected images. 1 Select [ - Nikon Z 50 | Reference Manual - Page 555
3 Choose a size. • Highlight [Choose size] and press 2. • Highlight the desired size (length in pixels) using 1 and 3 and press J. 4 Choose how pictures are selected. Option [Select image(s)] [Select date] [Select folder] Description Resize selected pictures. Multiple pictures can be selected. - Nikon Z 50 | Reference Manual - Page 556
5 Select the source slot. • Highlight the slot with the card containing the desired pictures and press 2. • You will not be prompted to select the slot if only one memory card is inserted. 514 N The Retouch Menu: Creating Retouched Copies - Nikon Z 50 | Reference Manual - Page 557
6 Choose pictures. If you chose [Select image(s)]: • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted picture, press the W (Q) button. Selected pictures are indicated by a 8 icon. To deselect the - Nikon Z 50 | Reference Manual - Page 558
7 Save the resized copies. • A confirmation dialog will be displayed; highlight [Yes] and press J to save the resized copies. • To cancel the operation before all copies have been created, press the G button; when a confirmation dialog is displayed, highlight [Yes] and press J. D Resize Depending on - Nikon Z 50 | Reference Manual - Page 559
D-Lighting G button U N retouch menu D-Lighting brightens shadows. It is ideal for dark or backlit photographs. Before After The edit display shows before and after images. • Press 4 or 2 to choose the amount of correction performed. The effect can be previewed in the edit display. • Press J to - Nikon Z 50 | Reference Manual - Page 560
Red-Eye Correction G button U N retouch menu Correct "red-eye" caused by light from the flash reflecting from the retinas of portrait subjects. • Red-eye correction is available only with photographs taken using a flash. • Red-eye that cannot be detected by the camera will not be corrected. • Press - Nikon Z 50 | Reference Manual - Page 561
Straighten G button U N retouch menu Rotate pictures by up to ±5° in increments of approximately 0.25°. • The effect can be previewed in the edit display. • The greater the rotation, the more will be trimmed from the edges. • Press 4 or 2 to choose the amount of straightening performed. • Press J - Nikon Z 50 | Reference Manual - Page 562
the camera correct distortion automatically and then make fine adjustments using the multi selector. Select [Manual] to reduce distortion manually. • The effect can be previewed in the edit display. • Note that [Manual] must be used with copies created using the [Auto] option and with photos taken - Nikon Z 50 | Reference Manual - Page 563
Perspective Control G button U N retouch menu Create copies that reduce the effects of perspective in photos taken looking up from the base of a tall object. • The effect can be previewed in the edit display. • Note that greater amounts of perspective control result in more of the edges being - Nikon Z 50 | Reference Manual - Page 564
Monochrome G button U N retouch menu Copy photographs in monochrome. [Monochrome] gives you a choice of the following monochrome tints: Option Description [Black-andwhite] Copy photographs in black-and-white. [Sepia] Copy photographs in sepia. [Cyanotype] Copy photographs in blue-and-white - Nikon Z 50 | Reference Manual - Page 565
Image Overlay G button U N retouch menu Image overlay combines existing photographs to create a single picture that is saved separately from the originals. One NEF (RAW) image can be overlaid on another using additive blending ([Add]), or multiple images can be combined using [Lighten] or [Darken - Nikon Z 50 | Reference Manual - Page 566
2 Select [Add]. Highlight [Add] and press 2 to display image overlay options with [Image 1] highlighted. 3 Highlight the first image. • Press J to display a pictureselection dialog listing only NEF (RAW) images, where you can use the multi selector to highlight the first photograph in the overlay. • - Nikon Z 50 | Reference Manual - Page 567
5 Select the second image. Press 2 and select [Image 2], then select the second photo as described in Steps 3 and 4. 6 Adjust gain. • The overlay of [Image 1] and [Image 2] can be previewed in the "Preview" column. Highlight [Image 1] or [Image 2] and optimize exposure for the overlay by pressing 1 - Nikon Z 50 | Reference Manual - Page 568
8 Preview the overlay. • To preview the overlay, highlight [Overlay] and press J. • To select new photos or adjust gain, press W (Q). You will be returned to Step 6. 9 Save the overlay. Press J while the preview is displayed to save the overlay and display the resulting image. 526 N The Retouch Menu - Nikon Z 50 | Reference Manual - Page 569
D [Add] • Colors and brightness in the preview may differ from the final image. • Image overlay is available only with NEF (RAW) images taken with this camera with [Large] selected for [Image size] > [NEF (RAW)] in the photo shooting menu. Images created with other cameras or in other formats cannot - Nikon Z 50 | Reference Manual - Page 570
Lighten and Darken The camera compares multiple selected pictures and selects only the brightest or darkest pixels at each point in the image to create a single new JPEG copy. 1 Select [Lighten] or [Darken]. After selecting [Image overlay] in the retouch menu, highlight either [Lighten] or [Darken] - Nikon Z 50 | Reference Manual - Page 571
2 Choose how pictures are selected. Option Description [Select individual images] Select pictures for the overlay one-by-one. [Select consecutive images] Select two pictures; the overlay will include the two pictures and all images between them. [Select folder] The overlay will include all - Nikon Z 50 | Reference Manual - Page 572
If you chose [Select consecutive images]: • All pictures in a range chosen using the multi selector will be combined using the option selected in Step 1. - Use the W (Q) to select the first and last pictures in the desired range. - The first and last pictures are indicated by % icons and the - Nikon Z 50 | Reference Manual - Page 573
5 Save the overlay. • A confirmation dialog will be displayed; highlight [Yes] and press J to save the overlay and display the resulting picture. • To interrupt the process and display a confirmation dialog before the operation is complete, press the G button; to save the current overlay "as is" - Nikon Z 50 | Reference Manual - Page 574
Trim Movie G button U N retouch menu Create a copy from which unwanted footage has been removed (0 199). 532 N The Retouch Menu: Creating Retouched Copies - Nikon Z 50 | Reference Manual - Page 575
O My Menu/m Recent Settings To view [MY MENU], select the O tab in the camera menus. O My Menu: Creating a Custom Menu My Menu can be used to create and edit a customized list of up to 20 items from the playback, photo shooting, movie shooting, Custom Settings, setup, and retouch menus. Options can - Nikon Z 50 | Reference Manual - Page 576
2 Select a menu. Highlight the name of the menu containing the item you wish to add and press 2. 3 Select an item. Highlight the desired menu item and press J. 4 Position the new item. Press 1 or 3 to position the new item and press J to add it to My Menu. 5 Add more items. • The items currently - Nikon Z 50 | Reference Manual - Page 577
❚❚ Removing Items from My Menu 1 Select [Remove items] in [O MY MENU]. Highlight [Remove items] and press 2. 2 Select items. • Highlight items and press 2 to select (M) or deselect. • Continue until all the items you wish to remove are selected (L). 3 Remove the selected items. Press J; a - Nikon Z 50 | Reference Manual - Page 578
❚❚ Reordering Items in My Menu 1 Select [Rank items] in [O MY MENU]. Highlight [Rank items] and press 2. 2 Select an item. Highlight the item you wish to move and press J. 3 Position the item. • Press 1 or 3 to move the item up or down in My Menu and press J. • Repeat Steps 2-3 to reposition - Nikon Z 50 | Reference Manual - Page 579
❚❚ Displaying [RECENT SETTINGS] 1 Select [Choose tab] in [O MY MENU]. Highlight [Choose tab] and press 2. 2 Select [m RECENT SETTINGS]. • Highlight [m RECENT SETTINGS] in the [Choose tab] menu and press J. • The name of the menu will change from [MY MENU] to [RECENT SETTINGS]. O My Menu/m Recent - Nikon Z 50 | Reference Manual - Page 580
m Recent Settings: Accessing Recently-Used Settings ❚❚ How Items Are Added to [RECENT SETTINGS] Menu items are added to the top of the [RECENT SETTINGS] menu as they are used. The twenty most recently-used settings are listed. D Removing Items from the Recent Settings Menu To remove an item from the - Nikon Z 50 | Reference Manual - Page 581
Establishing Wireless Connections to Computers or Smart Devices Camera and Network System Chart The camera can connect: • to computers via Wi-Fi (0541), • to smartphones via Wi-Fi or Bluetooth (0567), and Camera and Network System Chart 539 - Nikon Z 50 | Reference Manual - Page 582
• to networks via an attached WT-7 wireless transmitter (0597) 540 Camera and Network System Chart - Nikon Z 50 | Reference Manual - Page 583
Connecting to Computers via Wi-Fi What Wi-Fi Can Do for You Connect using the camera's built-in Wi-Fi to upload selected pictures to a computer. The Wireless Transmitter Utility Before you will be able to upload images via Wi-Fi, you will need to pair the camera with the computer using Nikon's - Nikon Z 50 | Reference Manual - Page 584
Infrastructure and Access-Point Modes Either of the following two methods can be used to establish wireless connections between the camera and a computer. ❚❚ Direct Wireless Connection (Access-Point Mode) The camera and computer connect via direct wireless link. The camera acts as a wireless LAN - Nikon Z 50 | Reference Manual - Page 585
a new network profile, select [Search for Wi-Fi network] in the connection wizard. D Infrastructure Mode Connection to computers beyond the local area network is not supported. You can connect only to computers on the same network. Connecting to Computers via Wi-Fi 543 - Nikon Z 50 | Reference Manual - Page 586
Connecting in Access-Point Mode 1 Select [Connect to PC] in the camera setup menu, then highlight [Network settings] and press 2. 2 Highlight [Create profile] and press J. 3 Highlight [Direct connection to PC] and press J. The camera SSID and encryption key will be displayed. 544 Connecting to - Nikon Z 50 | Reference Manual - Page 587
4 Establish a connection to the camera. Windows: • Click the wireless LAN icon in the taskbar. • Select the SSID displayed by the camera in Step 3. • When prompted to enter the network security key, enter the encryption key displayed by the camera in Step 3. The computer will initiate a connection - Nikon Z 50 | Reference Manual - Page 588
5 Start pairing. When prompted, launch the Wireless Transmitter Utility on the computer. 6 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 5 and click [Next]. 546 Connecting to Computers via Wi-Fi - Nikon Z 50 | Reference Manual - Page 589
7 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. • The camera will display an authentication code. • Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next]. Connecting to Computers via Wi-Fi 547 - Nikon Z 50 | Reference Manual - Page 590
8 Complete the pairing process. • When the camera displays a message stating that pairing is complete, press J. • In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. • A - Nikon Z 50 | Reference Manual - Page 591
9 Check the connection. When a connection is established, the network SSID will be displayed in green in the camera [Connect to PC] menu. • If the camera SSID is not displayed in green, connect to the camera via the wireless network list on your computer. A wireless connection has now been - Nikon Z 50 | Reference Manual - Page 592
Connecting in Infrastructure Mode 1 Select [Connect to PC] in the camera setup menu, then highlight [Network settings] and press 2. 2 Highlight [Create profile] and press J. 550 Connecting to Computers via Wi-Fi - Nikon Z 50 | Reference Manual - Page 593
an SSID or encryption key, press X in Step 3. Next, press J and choose from the following options: Option Description [Pushbutton WPS] For routers that support push-button WPS. Press the WPS button on the router and then press the camera J button to connect. [PIN-entry WPS] The camera will - Nikon Z 50 | Reference Manual - Page 594
4 Choose a network. • Highlight a network SSID and press J. • Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 6. • If the desired network is not displayed, press - Nikon Z 50 | Reference Manual - Page 595
5 Enter the encryption key. • Press J and enter the encryption key for the wireless router. • For more information, see the documentation for the wireless router. • Press X when entry is complete. • Press X again to initiate the connection. A message will be displayed for a few seconds when the - Nikon Z 50 | Reference Manual - Page 596
the IP address automatically. A "configuration complete" message will be displayed once an IP address has been assigned. [Enter manually] Enter the IP address and sub-net mask manually. • Rotate the main command dial to highlight segments. • Press 4 or 2 to change the highlighted segment and press - Nikon Z 50 | Reference Manual - Page 597
7 Start pairing. When prompted, launch the Wireless Transmitter Utility on the computer. 8 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 7 and click [Next]. Connecting to Computers via Wi-Fi 555 - Nikon Z 50 | Reference Manual - Page 598
9 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. • The camera will display an authentication code. • Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next]. 556 Connecting to Computers via Wi-Fi - Nikon Z 50 | Reference Manual - Page 599
10 Complete the pairing process. • When the camera displays a message stating that pairing is complete, press J. • In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. • A - Nikon Z 50 | Reference Manual - Page 600
11 Check the connection. When a connection is established, the network SSID will be displayed in green in the camera [Connect to PC] menu. • If the camera SSID is not displayed in green, connect to the camera via the wireless network list on your computer. A wireless connection has now been - Nikon Z 50 | Reference Manual - Page 601
Uploading Pictures Pictures can be selected for upload during playback. They can also be uploaded automatically as they are taken. D Destination Folders By default, images are uploaded to the following folders: • Windows: \Users\(user name)\Pictures\Wireless Transmitter Utility • macOS: /Users/(user - Nikon Z 50 | Reference Manual - Page 602
3 Highlight [Select to send to computer] and press J. • A white "send" icon will appear on the picture. If the camera is currently connected to a network, upload will begin immediately and the icon will turn green. • Otherwise, upload will begin when a connection is established. • Repeat Steps 2-3 - Nikon Z 50 | Reference Manual - Page 603
❚❚ Uploading Photos as They Are Taken To upload new photos as they are taken, select [On] for [Connect to PC] > [Options] > [Auto send] in the setup menu. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Movies and photos - Nikon Z 50 | Reference Manual - Page 604
❚❚ The Status Display The [Connect to PC] display shows the following: 3 1 Status: The status of the connection to the host. The host name is displayed in green when a connection is established. While files are being transferred, the status display shows "Now sending" preceded by the name of the - Nikon Z 50 | Reference Manual - Page 605
Disconnecting and Reconnecting ❚❚ Disconnecting You can end the connection by: • turning the camera off, • selecting [Disable] for [Connect to PC] > [Wi-Fi connection] in the setup menu, • selecting [Wi-Fi connection] > [Close Wi-Fi connection] in the photo-mode i menu, or • connecting to a smart - Nikon Z 50 | Reference Manual - Page 606
❚❚ Reconnecting To reconnect to an existing network: • select [Enable] for [Connect to PC] > [Wi-Fi connection] in the setup menu, or • select [Wi-Fi connection] > [Establish Wi-Fi connection with PC] in the photo-mode i menu. D Access-Point Mode Enable camera Wi-Fi before connecting. D Multiple - Nikon Z 50 | Reference Manual - Page 607
Connecting to Smart Devices The SnapBridge App Use the SnapBridge app for wireless connections between the camera and your smartphone or tablet ("smart device"). • SnapBridge apps can be downloaded from the Apple App Store® or on Google Play™. • Visit the Nikon website for the latest SnapBridge news - Nikon Z 50 | Reference Manual - Page 608
What SnapBridge Can Do for You The tasks that can be performed using the SnapBridge app are outlined below. For details, see the SnapBridge app online help: https://nikonimglib.com/snbr/onlinehelp/en/index.html ❚❚ Downloading Pictures from the Camera Download existing pictures to your smart device. - Nikon Z 50 | Reference Manual - Page 609
Wireless Connections Use the SnapBridge app for wireless connections between the camera and your smart device. You can connect via either Wi-Fi (0568) or Bluetooth (0577). Connecting using Bluetooth allows pictures to be uploaded automatically as they are taken. Connecting to Smart Devices 567 - Nikon Z 50 | Reference Manual - Page 610
Connecting via Wi-Fi (Wi-Fi Mode) D Before Connecting • Enable Wi-Fi on the smart device. For details, see the documentation provided with the device. • Ensure that the batteries in the camera and smart device are fully charged to prevent the devices turning off unexpectedly. • Check that there is - Nikon Z 50 | Reference Manual - Page 611
• If you have launched the app before, open the tab and select > [Wi-Fi mode] before proceeding to Step 3. 1 2 3 Connecting to Smart Devices 569 - Nikon Z 50 | Reference Manual - Page 612
2 Smart device: When prompted to choose the camera type, tap [Mirrorless camera] and then tap [Wi-Fi connection]. 2 1 3 Camera/smart device: Turn the camera on when prompted. Do not tap [Next] until you have completed the next step. 570 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 613
4 Camera: Select [Connect to smart device] > [Wi-Fi connection] in the setup menu, then highlight [Establish Wi-Fi connection] and press J. The camera SSID and password will be displayed. D Enabling Wi-Fi You can also enable Wi-Fi by selecting [Wi-Fi connection] > [Establish Wi-Fi conn. with smart - Nikon Z 50 | Reference Manual - Page 614
5 Smart device: Return to the smart device and tap [Next]. 572 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 615
6 Smart device: After reading the instructions displayed by the smart device, tap [Open the device settings app]. • Android devices: Wi-Fi settings will be displayed. • iOS devices: The "Settings" app will - Nikon Z 50 | Reference Manual - Page 616
7 Smart device: Enter the SSID and password displayed by the camera in Step 4. • The prompt displayed by the device varies with model and operating system. - Android device: 574 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 617
- iOS device: • You will not be required to enter the password when next you connect to the camera. Connecting to Smart Devices 575 - Nikon Z 50 | Reference Manual - Page 618
8 Smart device: Return to the SnapBridge app. • Once a Wi-Fi connection is established, Wi-Fi mode options will be displayed. • See online help for information on using the SnapBridge app. D Terminating Wi-Fi Mode To end the Wi-Fi connection, tap . When the icon changes to , tap and select [Exit Wi- - Nikon Z 50 | Reference Manual - Page 619
Connecting via Bluetooth Before connecting via Bluetooth for the first time, you will need to pair the camera and smart device as described below. The procedure for iOS differs slightly from that for Android devices. D Before Pairing • Enable Bluetooth on the smart device. For details, see the - Nikon Z 50 | Reference Manual - Page 620
2 Android device: Launch the SnapBridge app. • If this is the first time you have launched the app, tap [Connect to camera]. • If you have launched the app before, open the tab and tap [Connect to camera]. 578 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 621
have been paired. • You must grant access to location data when using Bluetooth. If prompted to provide access to location data, follow the on-screen instructions. 1 2 Connecting to Smart Devices 579 - Nikon Z 50 | Reference Manual - Page 622
4 Android device: Tap the camera name. 5 Camera/Android device: Confirm that the camera and Android device display the same authentication code. The authentication code is shown circled in the illustrations. 580 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 623
6 Camera/Android device: Initiate pairing. • Camera: Press J. • Android device: Tap the button indicated in the illustration. The button in the illustration is labeled [PAIR], but the label may differ depending on the type of device and version of Android you are using. D Pairing Error If you wait - Nikon Z 50 | Reference Manual - Page 624
7 Camera/Android device: Follow the on-screen instructions to complete pairing. • Camera: Press J. The camera will display the message shown in the illustration when pairing is complete. • Android device: Pairing is complete. Tap [OK] to exit to the tab. 582 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 625
D Pairing for the First Time • The first time you pair the Android device with a camera after installing the SnapBridge app, you may be prompted to select auto link (auto upload and auto clock and location synchronization) options. • This prompt will not be displayed a second time. Auto link - Nikon Z 50 | Reference Manual - Page 626
❚❚ Connecting to an iOS Device for the First Time: Pairing For information on connecting to Android devices, see "Connecting to an Android Device for the First Time: Pairing" (0 577). 1 Camera: Select [Connect to smart device] > [Pairing (Bluetooth)] in the setup menu, then highlight [Start pairing] - Nikon Z 50 | Reference Manual - Page 627
2 iOS device: Launch the SnapBridge app. • If this is the first time you have launched the app, tap [Connect to camera]. • If you have launched the app before, open the tab and tap [Connect to camera]. Connecting to Smart Devices 585 - Nikon Z 50 | Reference Manual - Page 628
3 iOS device: Tap [Mirrorless camera] and then tap [Pairing (Bluetooth)]. This step can be omitted once the devices have been paired. 1 2 586 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 629
4 iOS device: Tap the camera name. 5 iOS device: Read the pairing instructions. Pairing instructions will be displayed. Read the instructions carefully and tap [Understood]. Connecting to Smart Devices 587 - Nikon Z 50 | Reference Manual - Page 630
6 iOS device: Tap the camera name again. The iOS device prompt you to select an accessory. Tap the camera name again. 588 Connecting to Smart Devices - Nikon Z 50 | Reference Manual - Page 631
7 Camera/iOS device: Initiate pairing. • Camera: Press J. • iOS device: Tap the button indicated in the illustration. The button in the illustration is labeled [Pair], but the label may differ depending on the version of iOS you are using. Connecting to Smart Devices 589 - Nikon Z 50 | Reference Manual - Page 632
D Pairing Error If you wait too long between pressing the button on the camera and tapping the button on the iOS device, the device will display an error message and pairing will fail. Dismiss the SnapBridge app and check that it is not running in the background, then open the iOS "Settings" app and - Nikon Z 50 | Reference Manual - Page 633
8 Camera/iOS device: Follow the on-screen instructions to complete pairing. • Camera: Press J. The camera will display the message shown in the illustration when pairing is complete. • iOS device: Pairing is complete. Tap [OK] to exit to the tab. Connecting to Smart Devices 591 - Nikon Z 50 | Reference Manual - Page 634
D Pairing for the First Time • The first time you pair the iOS device with a camera after installing the SnapBridge app, you may be prompted to select auto link (auto upload and auto clock and location synchronization) options. • This prompt will not be displayed a second time. Auto link settings - Nikon Z 50 | Reference Manual - Page 635
❚❚ Connecting to a Paired Device Connecting to a smart device that has already been paired with the camera is quick and easy. 1 Camera: In the setup menu, select [Connect to smart device] > [Pairing (Bluetooth)] > [Bluetooth connection], then highlight [Enable] and press J. 2 Smart device: Launch - Nikon Z 50 | Reference Manual - Page 636
Connecting to Networks Using the WT-7 The WT-7 When attached to the camera, the optional WT-7 wireless transmitter can be used to connect to computers, ftp servers, or other devices over Ethernet or wireless networks. D Before Connecting the WT-7 • Before connecting the WT-7, confirm that the - Nikon Z 50 | Reference Manual - Page 637
What the WT-7 Can Do for You Using the WT-7, you can: ❚❚ Upload existing photos and movies to an ftp server or computer Not only can you copy pictures to computers (image transfer mode), you can also upload them to ftp servers (ftp upload mode). Pictures can be uploaded as they are taken. ❚❚ Control - Nikon Z 50 | Reference Manual - Page 638
❚❚ Control the camera and take pictures remotely from a web browser Using a web browser, you can control the camera from network computers and smart devices for remote control that requires no dedicated app or computer software (http server mode). 596 Connecting to Networks Using the WT-7 - Nikon Z 50 | Reference Manual - Page 639
Wireless transmitter (WT-7)] > [Wireless transmitter] > [Use] in the camera setup menu. • For information on connecting to networks using a WT-7 wireless transmitter, see the manual supplied with the WT-7. A Menu Options for the WT-7 All menu options for the WT-7 can be found in the setup menu under - Nikon Z 50 | Reference Manual - Page 640
listed below. • Troubleshooting information for the SnapBridge app can be found in the app's online help, which can be viewed at: https://nikonimglib.com/snbr/onlinehelp/en/index.html • For information on the Wireless Transmitter Utility, see the utility's online help. Problem The camera displays - Nikon Z 50 | Reference Manual - Page 641
Cabled Connections to Computers and HDMI Devices Connecting to Computers Via USB Connect the camera using the supplied USB cable. You can then use Nikon ViewNX-i software to copy pictures to the computer for viewing and editing. For information on establishing wireless connections to computers, see - Nikon Z 50 | Reference Manual - Page 642
website for system requirements and other information. • Download the latest ViewNX-i installer from the website below and follow the on-screen instructions to complete installation. https://downloadcenter.nikonimglib.com/ • Note that you may be unable to download pictures from the camera using - Nikon Z 50 | Reference Manual - Page 643
Copying Pictures to a Computer Using ViewNX-i See online help for detailed instructions. 1 Connect the camera to the computer. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown. 2 - Nikon Z 50 | Reference Manual - Page 644
3 Click [Start Transfer]. Pictures on the memory card will be copied to the computer. 4 Turn the camera off. Disconnect the USB cable when transfer is complete. D Windows 10 and Windows 8.1 Windows 10 and Windows 8.1 may display an AutoPlay prompt when the camera is connected. Click the dialog and - Nikon Z 50 | Reference Manual - Page 645
D macOS If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS) and select Nikon Transfer 2 as the application that opens when the camera is detected. D Transferring Movies Do not attempt to transfer - Nikon Z 50 | Reference Manual - Page 646
Connecting to HDMI Devices The camera can be connected to TVs, recorders, and other devices featuring HDMI connectors. Use the optional HDMI cable (0704) or a third-party type C HDMI cable. These items must be purchased separately. Always turn the camera off before connecting or disconnecting an - Nikon Z 50 | Reference Manual - Page 647
TVs • After tuning the TV to the HDMI input channel, turn the camera on and press the K button to view pictures on the television screen. • Audio playback volume can be adjusted using the controls on the TV. Camera controls cannot be used. • If the camera is paired with a smart device running the - Nikon Z 50 | Reference Manual - Page 648
Recorders The camera can record video directly to connected HDMI recorders. Use the [HDMI] item in the setup menu to adjust settings for HDMI output. Some recorders will start and stop recording in response to camera controls. ❚❚ Output Resolution Choose the format for images output to the HDMI - Nikon Z 50 | Reference Manual - Page 649
allows camera controls to be used to start and stop recording when the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol. • External recording control is available with Atomos SHOGUN, NINJA, and SUMO-series Monitor recorders. For more information on device - Nikon Z 50 | Reference Manual - Page 650
Option Description Preserve details in highlights and shadows and avoid over-saturated colors when recording movies. [N-Log] is intended for footage that will be color graded during post-production. [HDR (HLG)] is used to record footage in HLG format for such applications as HDR broadcasting. - Nikon Z 50 | Reference Manual - Page 651
Pro 2 D [10 Bit] Selected for [Output Data Depth] • The HDMI signal will be output at a bit depth of 10 bits only to HDMI recorders that support this option. • Regardless of the option selected for monitor mode, the display will switch to the camera monitor and the viewfinder will turn off. • When - Nikon Z 50 | Reference Manual - Page 652
only be achieved if your storage device, computer, monitor, operating system, software, and other equipment support HDR (HLG). If a signal is received from the connected device indicating that it supports HDR (HLG), the camera will respond with a "gamma: HLG" identifier. D Zoom • Zooming in on the - Nikon Z 50 | Reference Manual - Page 653
On-Camera Flash Photography "On-Camera" Versus "Remote" You can take pictures using an optional flash unit mounted on the camera accessory shoe or one or more remote flash units. • When using a flash, select [Off] for [Silent photography] in the photo shooting menu. Camera-Mounted Flash Units Take - Nikon Z 50 | Reference Manual - Page 654
Remote Flash Photography Take pictures with one or more remote flash units using wireless flash control (Advanced Wireless Lighting, or AWL). For more information, see "Remote Flash Photography" (0629). 612 "On-Camera" Versus "Remote" - Nikon Z 50 | Reference Manual - Page 655
Using an On-Camera Flash 1 Mount a flash unit on the camera accessory shoe. See the manual provided with the unit for details. 2 Turn on the camera and flash unit. The flash will begin charging; the flash-ready indicator (c) will appear in - Nikon Z 50 | Reference Manual - Page 656
D Shutter Speed Shutter speed can be set as follows when an optional flash unit is used: Mode b P, A S M Shutter speed Set automatically by camera (1/200 s-1/60 s) Set automatically by camera (1/200 s-1/60 s) * 1/200 s-30 s 1/200 s-30 s, Bulb, Time * Shutter speed may be set as slow as 30 s if - Nikon Z 50 | Reference Manual - Page 657
or standard "i-TTL fill-flash" flash control. i-TTL flash control is not available with flash units that do not support the Nikon Creative Lighting System. The camera supports the following types of i-TTL flash control: Flash control Description The camera uses "i-TTL balanced fill-flash" flash - Nikon Z 50 | Reference Manual - Page 658
Flash Control Mode When a flash unit that supports unified flash control (an SB-5000, SB-500, SB-400, or SB-300) is mounted on the camera, the flash control mode, flash level, and - Nikon Z 50 | Reference Manual - Page 659
adjusted automatically. • Output can be adjusted using [Auto external flash compensation]. • Auto external flash supports "auto aperture" (qA) and "non-TTL auto" (A) modes. See the flash unit manual for details. • Choose the distance to the subject; flash output will be adjusted automatically. • The - Nikon Z 50 | Reference Manual - Page 660
either the camera or flash unit are reflected on both devices, as are changes made using optional Camera Control Pro 2 software. The flash unit must support unified flash control. 618 Flash Control Mode - Nikon Z 50 | Reference Manual - Page 661
Flash Modes Use the [Flash mode] item in the photo shooting menu to choose the effect produced by the flash. The options available vary with the shooting mode. Option [Fill flash] I (front-curtain sync) J [Red-eye reduction] Description Available in This mode is recommended in most situations - Nikon Z 50 | Reference Manual - Page 662
Option L [Slow sync] (Slow sync) [Slow sync + red-eye] K (red-eye reduction with slow sync) M [Rear-curtain sync] s [Flash off] Description Available in As for "fill flash", except that shutter speed slows automatically to capture background lighting at night or under low light. • Note that - Nikon Z 50 | Reference Manual - Page 663
D Studio Strobe Lighting Rear-curtain sync cannot be used with studio flash systems, as the correct synchronization cannot be obtained. Flash Modes 621 - Nikon Z 50 | Reference Manual - Page 664
Flash Compensation Flash compensation is used to deliberately alter flash output, for example in order to change the brightness of the subject relative to the background. Via the [Flash compensation] item in the photo shooting menu, flash output can be increased to make the main subject appear - Nikon Z 50 | Reference Manual - Page 665
FV Lock This feature is used to lock flash output for CLS-compatible flash units, letting you take multiple photos or recompose shots without changing the flash level. Your subject need not be in the center of the frame, giving you more freedom when composing shots. • Flash output is adjusted - Nikon Z 50 | Reference Manual - Page 666
3 Turn the flash unit on and choose a flash control mode of monitor pre-flash qA or A. • If you are using an SB-5000, SB-500, SB-400, or SB-300 mounted on the camera accessory shoe, choose [TTL] or [Auto external flash] for [Flash control] > [Flash control mode]. • For information on other flash - Nikon Z 50 | Reference Manual - Page 667
5 Lock flash level. • After confirming that the flash-ready indicator (c) appears in the shooting display, press the [FV lock] control; the flash unit will emit a monitor pre-flash to determine the appropriate flash level. • Flash output will lock and an FV lock icon (r) will appear in the shooting - Nikon Z 50 | Reference Manual - Page 668
Flash Info for On-Camera Units When a unit that supports unified flash control (the SB-5000, SB-500, SB-400, or SB-300) is mounted on the camera accessory shoe, flash info can be viewed - Nikon Z 50 | Reference Manual - Page 669
FP indicator (0404) 2 Auto external flash compensation (0616) ❚❚ Distance-Priority Manual 1 1 2 2 3 3 Flash control mode (0616) FP indicator (0404) Distance-priority manual flash compensation (0616) Distance (0616) ❚❚ Manual 1 2 1 Flash control mode (0616) FP indicator (0404) 2 Flash level - Nikon Z 50 | Reference Manual - Page 670
❚❚ Repeating Flash 1 2 3 1 Flash control mode (0616) 2 Output (0616) 3 Times (0616) Frequency (0616) D Flash Info and Camera Settings The flash information display shows select camera settings, including shooting mode, shutter speed, aperture, and ISO sensitivity. D Changing Flash Settings Flash - Nikon Z 50 | Reference Manual - Page 671
an accessory connected to the camera are indicated by C, operations involving remote flash units by f. For more information on using remote flash units (f), see the manual provided with the flash unit. What Is Remote Flash Photography? 629 - Nikon Z 50 | Reference Manual - Page 672
Using Remote Flash Units Remote flash units can be controlled via: • radio signals * (0631), • optical signals from a flash unit mounted on the camera accessory shoe (0645), • radio signals, with additional lighting provided by a shoe-mounted flash unit * (0644), or • combined radio and optical - Nikon Z 50 | Reference Manual - Page 673
Radio AWL Remote flash control provided via radio signals from a WR-R10 connected to the camera is termed "radio Advanced Wireless Lighting", or "radio AWL". Radio AWL is available with SB-5000 flash units. Establishing a Wireless Connection Before using radio AWL, establish a wireless connection - Nikon Z 50 | Reference Manual - Page 674
2 C: Select [Radio AWL] for [Flash control] > [Wireless flash options] in the photo shooting menu. 3 C: Choose a channel for the WR-R10. Set the WR-R10 channel selector to the desired channel. 632 Radio AWL - Nikon Z 50 | Reference Manual - Page 675
4 C: Choose a link mode for the WR-R10. Select [Wireless remote (WR) options] > [Link mode] in the camera setup menu and choose from the following options: Option [Pairing] [PIN] Description The camera connects only to devices with which it has previously been paired. • As camera will not - Nikon Z 50 | Reference Manual - Page 676
5 f: Establish a wireless connection between the WR-R10 and the remote flash units. • Set the remote units to radio AWL remote mode. • Set the remote units to the channel you selected for the WR-R10 in Step 3. • Pair each of the remote units with the WR-R10 according to the option selected in Step - Nikon Z 50 | Reference Manual - Page 677
7 f: Confirm that the flash-ready lights for all flash units are lit. In radio AWL, the flash-ready indicator will light in the camera shooting or flash information display when all flash units are ready. D Listing Remote Flash Units To view the flash units currently controlled using radio AWL, - Nikon Z 50 | Reference Manual - Page 678
Remote Flash Photography Settings are adjusted using [Flash control] > [Remote flash control] in the photo shooting menu. Choose a remote flash control mode and take pictures as described below. ❚❚ Group Flash Select this item if you want to adjust settings separately for the flash units in each - Nikon Z 50 | Reference Manual - Page 679
are available: Option Description TTL i-TTL flash control. qA Auto aperture. Available only with compatible flash units. M Choose the flash level manually. -- The remote units do not fire. [Comp.] cannot be (off) adjusted. 4 f: Group the remote flash units. • Choose a group (A-F) for each of - Nikon Z 50 | Reference Manual - Page 680
5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • Test-fire the units and confirm that they are functioning normally. To test-fire the units, press the i button in the flash info display, highlight [c Test flash], and - Nikon Z 50 | Reference Manual - Page 681
balance between the remote flash units in groups A and B and adjust flash output for group C. Output for group C is adjusted manually. 1 C: Select [Quick wireless control] for [Flash control] > [Remote flash control]. 2 C: Highlight [Quick wireless control options] in the [Flash control] display - Nikon Z 50 | Reference Manual - Page 682
3 C: Adjust quick wireless control settings. • Choose the balance between groups A and B. • Adjust flash compensation for groups A and B. • Adjust settings for group C: - Select [M] to enable or [--] to disable the units in group C. - When [M] is selected, the units in group C will fire at the - Nikon Z 50 | Reference Manual - Page 683
4 f: Group the remote flash units. • Choose a group (A, B, or C). • The master flash can control up to 18 flash units in any combination. 5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • Test-fire the units and confirm - Nikon Z 50 | Reference Manual - Page 684
❚❚ Remote Repeating The flash units fire repeatedly while the shutter is open, producing a multiple-exposure effect. 1 C: Select [Remote repeating] for [Flash control] > [Remote flash control]. 2 C: Highlight [Remote repeating options] in the [Flash control] display and press 2. 3 C: Adjust remote - Nikon Z 50 | Reference Manual - Page 685
4 f: Group the remote flash units. • Choose a group (A-F) for each of the remote flash units. • The master flash can control up to 18 flash units in any combination. 5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • - Nikon Z 50 | Reference Manual - Page 686
Adding a Shoe-Mounted Flash Unit Radio-controlled flash units (0631) can be combined with any of the following flash units mounted on the camera accessory shoe: • SB-5000: Before attaching the flash unit, set it to radio-controlled master flash mode (a d icon will appear at the top left corner of - Nikon Z 50 | Reference Manual - Page 687
Optical AWL Remote flash units can be controlled via optical signals from an optional flash unit mounted on the camera accessory shoe and functioning as a master flash (optical AWL). For information on compatible flash units, see "Features Available with CLS-Compatible Flash Units" (0 693). • If the - Nikon Z 50 | Reference Manual - Page 688
shoe. Select [Optical AWL] for [Flash control] > [Wireless flash options] in the photo shooting menu and choose a remote flash control mode (the SB-500 supports only [Group flash]). Choose a remote flash control mode and take pictures as described below. D The SB-5000 When an SB-5000 is mounted on - Nikon Z 50 | Reference Manual - Page 689
are available: Option Description TTL i-TTL flash control. qA Auto aperture. Available only with compatible flash units. M Choose the flash level manually. -- The remote units do not fire. [Comp.] cannot be (off) adjusted. • For [Channel], choose the channel (1-4) the master flash will use - Nikon Z 50 | Reference Manual - Page 690
4 f: Choose a channel for the remote flash units. Set the remote flash units to the channel selected for [Channel] in Step 3. 5 f: Group the remote flash units. • Choose a group (A, B, or C). • If you are using an SB-500 as the master flash, choose from groups A and B. • There is no limit on the - Nikon Z 50 | Reference Manual - Page 691
balance between the remote flash units in groups A and B and adjust flash output for group C. Output for group C is adjusted manually. 1 C: Select [Quick wireless control] for [Flash control] > [Remote flash control]. 2 C: Highlight [Quick wireless control options] in the [Flash control] display - Nikon Z 50 | Reference Manual - Page 692
3 C: Adjust quick wireless control settings. • Choose the balance between groups A and B. • Adjust flash compensation for groups A and B. • Adjust settings for group C: - Select [M] to enable or [--] to disable the units in group C. - When [M] is selected, the units in group C will fire at the - Nikon Z 50 | Reference Manual - Page 693
4 f: Choose a channel for the remote flash units. Set the remote flash units to the channel selected for [Channel] in Step 3. 5 f: Group the remote flash units. • Choose a group (A, B, or C). • There is no limit on the number of remote flash units that may be used. The practical maximum, however, is - Nikon Z 50 | Reference Manual - Page 694
❚❚ Remote Repeating (SB-5000 Only) The flash units fire repeatedly while the shutter is open, producing a multiple-exposure effect. 1 C: Select [Remote repeating] for [Flash control] > [Remote flash control]. 2 C: Highlight [Remote repeating options] in the [Flash control] display and press 2. 652 - Nikon Z 50 | Reference Manual - Page 695
3 C: Adjust remote repeating options. • Adjust "output", "times", and "frequency". • Enable or disable selected groups. - Select [ON] to enable the selected group, [--] to disable the selected group. • Choose the channel. - For [Channel], choose the channel (1-4) the master flash will use for - Nikon Z 50 | Reference Manual - Page 696
4 f: Choose a channel for the remote flash units. Set the remote flash units to the channel selected for [Channel] in Step 3. 5 f: Group the remote flash units. • Choose a group (A, B, or C). • There is no limit on the number of remote flash units that may be used. The practical maximum, however, is - Nikon Z 50 | Reference Manual - Page 697
D Optical AWL • Position the sensor windows on the remote flash units to pick up the light from the master flash. Particular care is required if the master flash is mounted on a hand-held camera. • Be sure that direct light or strong reflections from the remote flash units do not enter the camera - Nikon Z 50 | Reference Manual - Page 698
Optical/Radio AWL For simultaneous optical and radio AWL, attach a WR-R10 and mount an SU-800 or a master flash that supports optical flash control (the SB-910, SB-900, SB-800, SB-700, or SB-500) on the accessory shoe. • Establish connections between the WR-R10 - Nikon Z 50 | Reference Manual - Page 699
Flash Info for Remote Units The camera can display flash info for a SB-5000 or SB-500 flash unit mounted on the camera accessory shoe and configured as a master flash for optical AWL, as well as for remote flash units controlled via radio AWL using a WR-R10. To view flash info, press the DISP - Nikon Z 50 | Reference Manual - Page 700
❚❚ Quick Wireless Control 12 3 8 4 7 6 5 1 Flash-ready indicator 1 2 Remote flash control (0294) FP indicator (0404) 3 Channel 2 (0631, 649) 4 Link mode 3 (0480) 5 Group C flash control mode and flash level (output; 0639, 649) 6 Flash compensation (0639, 649) 7 A:B ratio (0639, 649) 8 Remote - Nikon Z 50 | Reference Manual - Page 701
1 Displayed in radio AWL when all flash units are ready. 2 Optical AWL is indicated by Y, radio AWL by Z, joint optical and radio AWL by both icons together. Optical AWL channel for joint optical and radio AWL is displayed only when SB-500 is used as master flash. 3 Displayed only when radio AWL or - Nikon Z 50 | Reference Manual - Page 702
Troubleshooting Before Contacting Customer Support You may be able to resolve any issues with the camera by following the steps below. Check this list before consulting your retailer or Nikon-authorized service representative. Check the list of common problems. Common problems and solutions are - Nikon Z 50 | Reference Manual - Page 703
, however, that wireless network profiles, copyright information, and other user-generated entries will also be reset. Once reset, settings cannot be restored. Before Contacting Customer Support 661 - Nikon Z 50 | Reference Manual - Page 704
common issues are listed below. Battery/Display ˔ The camera is on but does not respond: • Wait for recording and other operations to end. • If the problem persists, turn the camera off. • If the camera does not turn off, remove and reinsert the battery. • If you are using an AC adapter, disconnect - Nikon Z 50 | Reference Manual - Page 705
shutter-release button: Select [Off] for Custom Setting d4 [Exposure delay mode]. ˔ Burst shooting is unavailable: Burst shooting cannot be used in conjunction with HDR. Problems and Solutions 663 - Nikon Z 50 | Reference Manual - Page 706
• Autofocus does not perform well under the following conditions. In these cases, use manual focus or focus lock. Autofocus does not perform well if: there is little or sync speed]. When using flash units that support auto FP highspeed sync, choose [1/200 s (Auto FP)] for a full range of - Nikon Z 50 | Reference Manual - Page 707
or bands appear: Bright regions or bands may occur if the subject is lit by a flashing sign, flash, or other light source with brief duration. Problems and Solutions 665 - Nikon Z 50 | Reference Manual - Page 708
to cool before trying to take photographs again. Note that the camera may feel warm to the touch, but this does not indicate a malfunction. 666 Problems and Solutions - Nikon Z 50 | Reference Manual - Page 709
for preset manual white balance. ˔ White balance (WB) bracketing is unavailable: • White balance bracketing is not available when an NEF (RAW) or NEF + JPEG option is selected for image quality. • White balance bracketing cannot be used in multiple exposure and HDR modes. Problems and Solutions - Nikon Z 50 | Reference Manual - Page 710
focus mode. ˔ Sound is not recorded with movies: • Is [Microphone off] selected for [Microphone sensitivity] in the movie shooting menu? • Was the movie recorded with [Manual] chosen for [Microphone sensitivity] in the movie shooting menu and a low sensitivity selected? 668 - Nikon Z 50 | Reference Manual - Page 711
as the [NEF (RAW) processing] item in the retouch menu. • Copy the pictures to a computer and print them using Capture NX-D or other software that supports the NEF (RAW) format. Problems and Solutions 669 - Nikon Z 50 | Reference Manual - Page 712
to upload pictures when the camera is connected to a computer. Copy pictures from the memory card to a computer using a card reader or other device. 670 Problems and Solutions - Nikon Z 50 | Reference Manual - Page 713
may be unable to download or display location data from smart devices depending on the version of the operating system and/ or SnapBridge app used. Problems and Solutions 671 - Nikon Z 50 | Reference Manual - Page 714
regularly against more accurate timepieces and reset as necessary. ˔ Menu items cannot be selected: Some items are not available at certain combinations of settings. 672 Problems and Solutions - Nikon Z 50 | Reference Manual - Page 715
and camera display. Alerts The following alerts appear in the control panel and camera display: Alert Camera Control display panel Problem Solution H Low battery. Ready spare battery. • Ensure that the lens is correctly attached. • Ensure that retractable l lenses are extended. Lens - Nikon Z 50 | Reference Manual - Page 716
Alert Camera Control display panel Problem Subject too bright; limits of camera exposure metering system exceeded. (Exposure indicators and shutter speed or aperture display flash) Subject too dark; limits of camera - Nikon Z 50 | Reference Manual - Page 717
Alert Camera Control display panel Problem Solution c (flashes) Photo may be underexposed. Check Flash shutter-release button again. If error persists or appears frequently, consult Nikon-authorized service representative. Card (flashes) The memory card is write-protected ("locked"). Slide - Nikon Z 50 | Reference Manual - Page 718
in the camera display: Messages Camera display Control panel Problem Solution Shutter release disabled. Recharge battery. - Battery exhausted this camera. To use the camera safely, choose a authorized service - Battery info not representative. available. • Battery level is extremely - Nikon Z 50 | Reference Manual - Page 719
Err (flashes) Unable to create new folder. • Check that camera supports memory card. • If error persists after card has been repeatedly ejected and reinserted, card may be damaged. Contact retailer or Nikonauthorized service representative. • Delete pictures from memory card until there is room for - Nikon Z 50 | Reference Manual - Page 720
Camera display Control panel Problem Solution This card is not formatted. Format the card. For (flashes) Memory card is not correctly formatted. • Format memory card. • Replace with correctly- formatted memory card. FTZ mount adapter firmware version not supported. Upgrade FTZ firmware - Nikon Z 50 | Reference Manual - Page 721
Messages Camera display Control panel Problem Solution Folder contains Insert memory card that no images. contains pictures. Folder contains no images. - No pictures in folder selected for playback. Use [Playback folder] - Nikon Z 50 | Reference Manual - Page 722
Technical Notes Compatible Lenses and Accessories The camera can be used with all Z mount lenses. Confirm that the lens name includes "NIKKOR Z". A Compatible F Mount Lenses F mount lenses can be mounted on Z mount cameras using an FTZ mount adapter. • Some features may not be available depending on - Nikon Z 50 | Reference Manual - Page 723
The Camera Display and Control Panel For illustrative purposes, the displays are shown with all indicators lit. The Monitor ❚❚ Photo Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 48 16 47 17 46 18 19 45 20 44 43 42 21 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 1 - Nikon Z 50 | Reference Manual - Page 724
7 Release mode (0125, 160) 8 Focus point (056, 77) 9 Focus mode (074) 10 AF-area mode (077) 11 Active D-Lighting (0283) 12 Picture Control (0139) 13 Bluetooth connection indicator (0483) Airplane mode (0482) 14 White balance (094, 145, 267) 15 Image area (0260) 16 Image size (0154) 17 Image quality - Nikon Z 50 | Reference Manual - Page 725
26 ISO sensitivity (0118) 27 ISO sensitivity indicator (0 118) Auto ISO sensitivity indicator (0 120) 28 Exposure compensation indicator (0122) 29 Flash compensation indicator (0 622) 30 Subject-tracking AF (086) 31 Aperture (0108, 109) 32 Aperture lock icon (0429) 33 Shutter speed (0108, 109) 34 - Nikon Z 50 | Reference Manual - Page 726
The Information Display 1 2 34 5 67 9 8 1 Shooting mode (0106) 2 Flexible program indicator (0 107) 3 User setting mode (0115) 4 Shutter speed lock icon (0 429) 5 Shutter speed (0108, 109) 6 Aperture lock icon (0429) 7 Aperture (0108, 109) 8 Exposure indicator Exposure (0110) Exposure - Nikon Z 50 | Reference Manual - Page 727
12 3 10 9 8 7 1 Flash compensation indicator (0 622) 2 Exposure compensation indicator (0122) Exposure compensation value (0 122) 3 Exposure and flash bracketing indicator (0298) WB bracketing indicator (0 303) ADL bracketing indicator (0 306) HDR indicator (0321) Multiple exposure indicator (0 - Nikon Z 50 | Reference Manual - Page 728
1 2 345 6 7 8 9 10 23 22 11 21 12 20 13 19 18 17 1 Bluetooth connection indicator (0483) Airplane mode (0482) 2 Wi-Fi connection indicator (0 158) 3 Long exposure noise reduction indicator (0285) 4 Shutter type (0398) Silent photography (0100) 5 Exposure delay mode (0397) 6 Interval timer - Nikon Z 50 | Reference Manual - Page 729
❚❚ Movie Mode 12 16 15 14 13 12 34 5 6 7 8 9 10 1 Recording indicator (063) "No movie" indicator (065) 2 External recording control (0 606) 3 Destination (0177) 4 Frame size and rate/image quality (0168) 5 Image area (0175) 6 Time remaining (063) 7 Timecode (0375) 8 File name (0364) 9 Wind noise - Nikon Z 50 | Reference Manual - Page 730
The Viewfinder ❚❚ Photo Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 46 16 45 17 44 18 43 42 41 19 20 40 21 39 22 38 37 36 34 32 30 35 33 31 1 Battery indicator (044, 727) 2 USB power delivery (0492) 3 Live view preview indicator (0 402) 4 Vibration reduction indicator (0 161) 5 Interval - Nikon Z 50 | Reference Manual - Page 731
15 Image area (0260) 16 Bluetooth connection indicator (0483) Airplane mode (0482) 17 Wi-Fi connection indicator (0 158) 18 Focus point (056, 77) 19 Exposure and flash bracketing indicator (0298) WB bracketing indicator (0 303) ADL bracketing indicator (0 306) HDR indicator (0321) Multiple exposure - Nikon Z 50 | Reference Manual - Page 732
38 Focus indicator (091) 39 Exposure delay mode (0397) 40 Shutter type (0398) Silent photography (0100) 41 Shooting mode (0106) 42 Flexible program indicator (0 107) 43 Flicker detection (0289) 44 Shutter speed lock icon (0 429) 45 AF-area brackets (077) 46 Temperature warning 690 The Camera Display - Nikon Z 50 | Reference Manual - Page 733
❚❚ Movie Mode 16 15 12 3 4 5 14 13 12 11 10 1 Frame size and rate/image quality (0168) 2 Image area (0175) 3 File name (0364) 4 External recording control (0 606) 5 Recording indicator (063) "No movie" indicator (065) 6 Timecode (0375) 7 Time remaining (063) 8 Destination (0177) 9 Release mode ( - Nikon Z 50 | Reference Manual - Page 734
The Control Panel 1 2 34 5 13 12 6 11 7 8 10 1 Shutter speed lock icon (0 429) 2 Shutter speed (0108, 109) 3 Exposure compensation indicator (0122) Exposure compensation value (0 122) 4 Aperture lock icon (0429) 5 Aperture (0108, 109) 6 USB power delivery (0492) 7 Battery indicator (044, 727) - Nikon Z 50 | Reference Manual - Page 735
units. ❚❚ Features Available with CLS-Compatible Flash Units Flash unit Supported features SB-300 SB-400 SB-R200 SU-800 SB-500 SB - - 4 4 qA Auto aperture 4 4 3 A Non-TTL auto - 4 3 DistanceGN priority manual M Manual 4 4 4 ------ 4 4 4 4 44 - - 44 44 RPT Repeating flash 4 4 ------- - Nikon Z 50 | Reference Manual - Page 736
-700 SB-910/ SB-900/ SB-800 SB-5000 Master Optical Advanced Wireless Lighting Supported features Flash unit Remote flash control 4 4 4 - 4 4 4 - - - 4 - - 4 5 - - - control qA Auto aperture 4 4 A Non-TTL auto M Manual 4 4 4 - 44 - - - - RPT Repeating flash i-TTL i-TTL 4 4 ------- 4 4 - Nikon Z 50 | Reference Manual - Page 737
in the camera menus. 5 Available during close-up photography only. 6 Choice of qA and A depends on the option selected with the master flash. 7 Supports the same features as remote flash units with optical AWL. 8 Available only in i-TTL, qA, A, GN, and M flash-control modes. Compatible Flash Units - Nikon Z 50 | Reference Manual - Page 738
a commander for SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, or SB-R200 flash units. Group flash control is supported for up to three groups. The SU-800 itself is not equipped with a flash. D Flash Photography Flash photography cannot be combined with some camera features - Nikon Z 50 | Reference Manual - Page 739
FV Lock with Optional Flash Units • FV lock is available with optional flash units in TTL and (where supported) monitor pre-flash qA and monitor pre-flash A flash control modes (see the manual provided with the flash unit for more information). • Note that when Advanced Wireless Lighting is used to - Nikon Z 50 | Reference Manual - Page 740
qA) Non-TTL auto (A) Entire frame Area metered by flash exposure meter D Notes on Optional Flash Units • Refer to the flash unit manual for detailed instructions. • If the unit supports CLS, refer to the section on CLS-compatible digital SLR cameras. This camera is not included in the "digital SLR - Nikon Z 50 | Reference Manual - Page 741
• In mode P, the maximum aperture (minimum f-number) is limited according to ISO sensitivity, as shown below: Maximum aperture (f-number) at ISO equivalent of: 100 200 400 800 1600 3200 6400 12800 4 5 5.6 7.1 8 10 11 13 * If the maximum aperture of the lens is smaller than given above, the - Nikon Z 50 | Reference Manual - Page 742
A Modeling Illumination • Pressing the control to which [Preview] has been assigned using Custom Setting f2 [Custom controls] causes CLS-compatible flash units to emit a modeling flash. • This feature can be used with Advanced Wireless Lighting to preview the total lighting effect achieved with - Nikon Z 50 | Reference Manual - Page 743
Other Compatible Accessories A variety of accessories are available for your Nikon camera. D Compatible Accessories • Availability may vary with country or region. • See our website or brochures for the latest information. ˔ Power Sources • EN-EL15c Rechargeable Li-ion Battery: EN-EL15c batteries - Nikon Z 50 | Reference Manual - Page 744
an MB-N11, it can also supply power to the camera. - Information on connecting and removing the battery pack and instructions on its use and care are available either via the manual supplied with the MB-N10 or, in the case of the MB-N11, in "Optional MB-N11 Power Battery Packs - Nikon Z 50 | Reference Manual - Page 745
, ND4, ND4S, ND8, ND8S, ND400, A2, A12, B2, B8, B12); we suggest that [Center-weighted metering] be selected instead. See the filter manual for details. • Filters intended for special-effects photography may interfere with autofocus or the in-focus indicator (I). ˔ Remote Cords MC-DC2 Remote Cord - Nikon Z 50 | Reference Manual - Page 746
˔ HDMI Cables HC-E1 HDMI Cable: An HDMI cable with a type C connector for connection to the camera and a type A connector for connection to HDMI devices. ˔ Hot Shoe Adapters AS-15 Sync Terminal Adapter: Mount the AS-15 on the camera hot shoe to connect studio strobe lights or other flash equipment - Nikon Z 50 | Reference Manual - Page 747
and SB-R200 Speedlights: These units can be mounted on the camera for flash photography. Some also support wireless remote control for off-camera flash photography with multiple flash units. - See the manual supplied with each Speedlight for information on mounting the unit on the camera. - For more - Nikon Z 50 | Reference Manual - Page 748
˔ Microphones • ME-1 Stereo Microphone: Connect the ME-1 to the camera microphone jack to record stereo sound. Using an external microphone also reduces the chance of picking up equipment noise, such as the sounds produced during movie recording when focus is achieved using autofocus. • ME-W1 - Nikon Z 50 | Reference Manual - Page 749
and WR-1 firmware version 1.0.1 or later). For information on firmware updates, see the Nikon website for your area. Consult a Nikon-authorized service representative when updating the firmware for the WR-R10 from versions prior to version 2.0 to version 3.0 or later. Other Compatible Accessories - Nikon Z 50 | Reference Manual - Page 750
D The HDMI/USB Cable Clip To prevent accidental disconnection, attach the supplied clip to USB cables or optional HDMI cables as shown (note that the clip may not fit all third-party HDMI cables). • The illustrations show the USB cable. Pass HDMI cables through the other channel. • Keep the monitor - Nikon Z 50 | Reference Manual - Page 751
USB cable HDMI cable and USB cable used simultaneously D Attaching and Removing the Accessory Shoe Cover The cover slides into the shoe as shown. To remove the cover, hold the camera firmly, press the cover down with a thumb and slide it in the direction shown. Other Compatible Accessories 709 - Nikon Z 50 | Reference Manual - Page 752
Optional MB-N11 Power Battery Packs ❚❚ Parts of the MB-N11: Names and Functions The name and function of each part of the MB-N11 are listed below. 1 2 3 4 5 8 6 7 1 Contact cap Protects the MB-N11's power/signal contacts. 2 Signal contacts - 3 Power contacts - 4 Multi selector for - Nikon Z 50 | Reference Manual - Page 753
13 12 10 11 9 14 15 16 17 9 Charging connector cover Used when connecting an EH-7P charging AC adapter (available separately for the 10 Charging connector Z 6II, supplied with the Z 7II). 11 LED lamp (×2) Light while batteries are charging. 12 Mounting screw Used when attaching the MB-N11 - Nikon Z 50 | Reference Manual - Page 754
18 22 21 20 19 18 Battery-chamber cover holder Holds the camera battery-chamber cover while it is removed from the camera. 19 Sub-command dial for vertical shooting Performs the same role as the matching control on the camera. 20 Control lock Locks the controls on the MB-N11 to prevent - Nikon Z 50 | Reference Manual - Page 755
23 24 25 28 27 26 23 Battery Chamber A 24 Battery power terminals (×2) 25 Battery Chamber B 26 Battery holder power terminals 27 Battery latch 28 Battery holder Holds one EN-EL15c rechargeable Li-ion battery. See "Inserting Batteries in the MB-N11" (0 716). Holds one EN-EL15c rechargeable - Nikon Z 50 | Reference Manual - Page 756
❚❚ Attaching the MB-N11 Before attaching the MB-N11, turn the camera off. To prevent unintended operation while attachment is in progress, leave the control lock on the MB-N11 in the L (locked) position until the process is complete. 1 Remove the contact cap from the battery pack. Keep the contact - Nikon Z 50 | Reference Manual - Page 757
3 Attach the MB-N11 to the camera. Rotate the attachment wheel in the direction shown by the FLOCK arrow to secure the battery pack in place. D Removing the MB-N11 To remove the MB-N11, turn the camera off, then loosen the attachment wheel by turning it in the direction opposite to that shown by the - Nikon Z 50 | Reference Manual - Page 758
❚❚ Inserting Batteries in the MB-N11 The MB-N11 can be used with up to two ENEL15c rechargeable Li-ion batteries. Before inserting the batteries, turn the camera off. To prevent unintended operation while the batteries are being exchanged, you will also need to leave the control lock on the MB-N11 - Nikon Z 50 | Reference Manual - Page 759
3 Insert the batteries in the battery holder. Insert the batteries as shown. The battery latch will click into place when the battery in Chamber A is fully inserted. A B 4 Insert the battery holder terminals-first. Using the bottom of the battery holder to depress the battery-holder latch, slide the - Nikon Z 50 | Reference Manual - Page 760
5 Close the holder-chamber cover and latch it by pressing and sliding it in the direction shown. A Removing the Batteries Remove the holder and then remove the batteries as shown. 718 Other Compatible Accessories - Nikon Z 50 | Reference Manual - Page 761
A Exchanging the Battery in Chamber A • The battery in Chamber A can be exchanged without removing the battery holder. Slide the battery into the chamber, stopping when the latch clicks into place. • The battery can be removed by pressing the latch as shown and sliding the battery from the holder. - Nikon Z 50 | Reference Manual - Page 762
A Exchanging Batteries While Shooting When two batteries are inserted, you can replace the battery in Chamber A without turning the camera off. You may find this useful when using the camera continuously for extended periods. Be careful not to press the battery-holder latch or remove the battery - Nikon Z 50 | Reference Manual - Page 763
❚❚ Charging Batteries Using a Charging AC Adapter Batteries inserted in the MB-N11 can be charged using an EH-7P charging AC adapter (available separately for the Z 6II, supplied with the Z 7II). 1 Connect an EH-7P charging AC adapter to the charging connector on the MB-N11. • Turn the camera off. - Nikon Z 50 | Reference Manual - Page 764
2 Plug the charging AC adapter into a household power outlet. • The batteries charge while the camera is off. • The LED lamp for the battery that is currently charging will light while charging is in progress. The LED lamp turns off when charging is complete. • The time needed to charge two fully- - Nikon Z 50 | Reference Manual - Page 765
D Charging Batteries • The EH-7P will not charge the batteries if connected to the camera USB port while the MB-N11 is attached. Connect the EH-7P to the charging connector on the MB-N11. • The EH-7P can be used to charge EN-EL15c and EN-EL15b batteries only. EN-EL15a and EN-EL15 batteries cannot be - Nikon Z 50 | Reference Manual - Page 766
❚❚ Using a Charging AC Adapter as a Power Source The camera can be powered by an EH-7P charging AC adapter (available separately for the Z 6II, supplied with the Z 7II) connected to the MB-N11's charging connector. D Power Supply • The charging AC adapter will supply power to the camera only if a - Nikon Z 50 | Reference Manual - Page 767
2 Plug in the charging AC adapter into a household power outlet. The shape of the EH-7P varies with the country or region of sale. 3 To begin the supply of power to the camera, turn the camera on and select [Enable] for [USB power delivery] in the setup menu. 4 To end the supply of power to the - Nikon Z 50 | Reference Manual - Page 768
D Using an Optional AC Adapter and Power Connector The optional EH-5d AC adapter and EP-5B power connector provide a steady supply of power when the camera must be left on for extended periods. When using the adapter with the MB-N11, insert the EP-5B in Chamber A before connecting it to the EH-5d. • - Nikon Z 50 | Reference Manual - Page 769
❚❚ Checking the Level of the Batteries in the MB-N11 When the MB-N11 is connected, the level of the battery currently providing power to the camera is shown in the shooting display and control panel while the camera is on (044). • The chamber containing the battery currently in use is indicated by - Nikon Z 50 | Reference Manual - Page 770
❚❚ Precautions for Use Observe the following precautions when using the MB-N11. • Touching the power/signal contacts with metal objects could cause a short-circuit; replace the contact cap before storing or transporting the battery pack. • The camera memory card access lamp may light when the MB-N11 - Nikon Z 50 | Reference Manual - Page 771
it is inserted in Chamber A. • If the camera displays the message [Error. Press shutter-release button to reset.], press the shutter-release button. If the problem persists or recurs frequently, consult a Nikon-authorized service representative. Other Compatible Accessories 729 - Nikon Z 50 | Reference Manual - Page 772
❚❚ If the Holder-Chamber Cover Detaches In order to protect the holder-chamber cover from damage, it may detach if force is applied while it is open. The holderchamber cover can be re-attached as shown. • Before re-attaching the holder-chamber cover, slide the cover so that the hinge is visible. 730 - Nikon Z 50 | Reference Manual - Page 773
-EL15c batteries) • Approx. 295 g/10.5 oz (without batteries) * Nikon reserves the right to change the appearance, specifications, and performance of the product described in this manual at any time and without prior notice. Other Compatible Accessories 731 - Nikon Z 50 | Reference Manual - Page 774
D Low Ambient Temperatures The camera may not function at low temperatures (approximately 10 °C/ 50 °F or below) when powered by partially-charged batteries. In cold weather, charge one set of batteries before use and keep another in a warm place, ready to be exchanged as necessary. Once warmed, - Nikon Z 50 | Reference Manual - Page 775
Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connector and AC adapter. 1 Open the battery- chamber (q) and power connector (w) covers. 2 Insert the EP-5B power connector. • Be sure to insert the connector in the correct orientation. • Using the - Nikon Z 50 | Reference Manual - Page 776
3 Close the battery- chamber cover. Position the power connector cable so that it passes through the power connector slot and close the battery-chamber cover. 4 Connect the EH-5d/EH-5c/EH-5b AC adapter to the EP-5B power connector. • Connect the AC adapter power cable to the AC socket on the AC - Nikon Z 50 | Reference Manual - Page 777
applications to help you get the most from your pictures. It also offers smooth access to online services. * Existing users should be sure to download the latest version, as earlier versions may not support the camera. • Capture NX-D: Fine-tune photos shot in Nikon's unique NEF/NRW (RAW) formats or - Nikon Z 50 | Reference Manual - Page 778
˔ Smartphone (Tablet) Apps SnapBridge: Download photos and movies from the camera to your smart device via a wireless connection. • SnapBridge apps can be downloaded from the Apple App Store® or on Google Play™. • Visit the Nikon website for the latest SnapBridge apps information. 736 Software - Nikon Z 50 | Reference Manual - Page 779
Caring for the Camera Storage When the camera will not be used for an extended period, remove the battery. Before removing the battery, confirm that the camera is off. Do not store the camera in locations that: • are poorly ventilated or subject to humidities of over 60% • are next to equipment that - Nikon Z 50 | Reference Manual - Page 780
Cleaning The procedure varies with the part that requires cleaning. The procedures are detailed below. • Do not use alcohol, thinner, or other volatile chemicals. ❚❚ Camera Body Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or - Nikon Z 50 | Reference Manual - Page 781
or cleaning can be performed automatically when the camera is turned off. If image sensor cleaning fails to resolve the problem, contact a Nikon-authorized service representative. ❚❚ Using the Menus • For maximum effect, hold the camera in normal orientation (base down). • Select [Clean image sensor - Nikon Z 50 | Reference Manual - Page 782
❚❚ Cleaning the Image Sensor at Shutdown Option Description 6 [Clean at shutdown] The image sensor is automatically cleaned during shutdown each time the camera is turned off. [Cleaning off] Automatic image sensor cleaning off. 1 Select [Automatic cleaning] for [Clean image sensor]. Pressing - Nikon Z 50 | Reference Manual - Page 783
as described below. Note, however, that the sensor is extremely delicate and easily damaged; we recommend that manual cleaning be performed only by a Nikon-authorized service representative. 1 Turn the camera off and remove the lens. 2 Holding the camera so that light can enter the camera, examine - Nikon Z 50 | Reference Manual - Page 784
cannot be removed using the image sensor cleaning option (0739), clean the image sensor as described in "Manual Cleaning" (0741), or have the sensor cleaned by authorized Nikon service personnel. Photographs affected by the presence of foreign matter on the sensor can be retouched using the clean - Nikon Z 50 | Reference Manual - Page 785
Caring for the Camera and Battery: Cautions Camera Care ˔ Do Not Drop Do not drop the camera or lens or subject them to blows. The product may malfunction if subjected to strong shocks or vibration. ˔ Keep Dry Keep the camera dry. Rusting of the internal mechanism caused by water inside the camera - Nikon Z 50 | Reference Manual - Page 786
actions could scratch or otherwise damage the sensor. ˔ Cleaning the Image Sensor For information on cleaning the image sensor, see "Image Sensor Cleaning" (0739) and "Manual Cleaning" (0741). 744 Caring for the Camera and Battery: Cautions - Nikon Z 50 | Reference Manual - Page 787
˔ The Lens Contacts Keep the lens contacts clean. Avoid touching them with your fingers. ˔ Store in a Well-Ventilated Area To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store the camera with naphtha or camphor moth balls, next to equipment that produces strong - Nikon Z 50 | Reference Manual - Page 788
˔ Monitor/Viewfinder • The monitors (including viewfinder) are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or - Nikon Z 50 | Reference Manual - Page 789
Battery Care ˔ Precautions for Use • If improperly handled, batteries may rupture or leak, causing the product to corrode. Observe the following precautions when handling batteries: - Turn the product off before replacing the battery. - Batteries may be hot after extended use. - Keep the battery - Nikon Z 50 | Reference Manual - Page 790
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). Failure to observe this precaution could damage the battery or impair its performance. Charge the battery indoors at ambient temperatures of 5 °C-35 °C (41 °F-95 °F). The battery will not charge if its - Nikon Z 50 | Reference Manual - Page 791
˔ Have Fully-Charged Spare Batteries Ready on Cold Days Partially-charged batteries may not function on cold days. In cold weather, charge one battery before use and keep another in a warm place, ready to be exchanged as necessary. Once warmed, a cold battery may recover some of its charge. ˔ - Nikon Z 50 | Reference Manual - Page 792
Using the Charger • Do not move the charger or touch the battery during charging; failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging - Nikon Z 50 | Reference Manual - Page 793
Specifications Nikon Z 7II/Z 6II Digital Camera Type Type Lens mount Digital camera with support for interchangeable lenses Nikon Z mount Lens Compatible lenses • Z mount NIKKOR lenses • F mount NIKKOR lenses (mount adapter required; restrictions may apply) Effective pixels • Z 7II: 45.7 - Nikon Z 50 | Reference Manual - Page 794
Storage Image size (pixels) Z 7II • [FX (36 × 24)] selected for image area: - 8256 × 5504 (Large: 45.4 M) - 6192 × 4128 (Medium: 25.6 M) - 4128 × 2752 (Small: 11.4 M) • [DX (24 × 16)] selected for image area: - 5408 × 3600 (Large: 19.5 M) - 4048 × 2696 (Medium: 10.9 M) - 2704 × 1800 (Small: 4.9 M) - Nikon Z 50 | Reference Manual - Page 795
Storage Image size (pixels) Z 6II • [FX (36 × 24)] selected for image area: - 6048 × 4024 (Large: 24.3 M) - 4528 × 3016 (Medium: 13.7 M) - 3024 × 2016 (Small: 6.1 M) • [DX (24 × 16)] selected for image area: - 3936 × 2624 (Large: 10.3 M) - 2944 × 1968 (Medium: 5.8 M) - 1968 × 1312 (Small: 2.6 M) • - Nikon Z 50 | Reference Manual - Page 796
Viewfinder 1.27-cm/0.5-in. approx. 3690k-dot (Quad VGA) OLED electronic viewfinder with color balance and auto and 11-level manual brightness controls Frame coverage Approx. 100% horizontal and 100% vertical Magnification Approx. 0.8× (50 mm lens at infinity, −1.0 m−1) Eyepoint 21 mm - Nikon Z 50 | Reference Manual - Page 797
coverage, and color balance and 11-level manual brightness controls Shutter Type Speed Flash sync speed s; synchronizes with shutter at 1/200 s or slower; auto FP high-speed sync supported Release Release mode Approximate frame advance rate Single frame, Continuous L, Continuous H, Continuous H - Nikon Z 50 | Reference Manual - Page 798
for ISO 100 and f/2.0 lens at 20 °C/68 °F Mode • b: Auto, P: programmed auto with flexible program, S: shutter-priority auto, A: aperturepriority auto, M: manual • U1, U2 and U3: user settings modes Exposure −5 - +5 EV (choose from step sizes of 1/3 and 1/2 EV) compensation available in modes - Nikon Z 50 | Reference Manual - Page 799
• Autofocus (AF): Single-servo AF (AF-S); continuousservo AF (AF-C); full-time AF (AF-F; available only in movie mode); predictive focus tracking • Manual focus (M): Electronic rangefinder can be used • Z 7II: 493 focus points • Z 6II: 273 focus points * Number of focus points available in photo - Nikon Z 50 | Reference Manual - Page 800
balance White balance Auto (3 types), natural light auto, direct sunlight, cloudy, shade, incandescent, fluorescent (7 types), flash, choose color temperature (2500 K-10,000 K), preset manual (up to 6 values can be stored), all with fine-tuning except choose color temperature 758 Specifications - Nikon Z 50 | Reference Manual - Page 801
Bracketing Bracketing Exposure and/or flash, white balance, and ADL Movie Metering system TTL metering using camera image sensor Metering mode Matrix, center-weighted, or highlight-weighted Frame size (pixels) and frame rate • 3840 × 2160 (4K UHD): 60p (progressive; Z 7II only)/ 50p (Z 7II - Nikon Z 50 | Reference Manual - Page 802
(ISO 64-Hi 2.0) ISO sensitivity with selectable upper limit (Recommended • b: Auto ISO sensitivity control (ISO 64-25600) Exposure Z 6II Index) • M: Manual selection (ISO 100-51200; choose from step sizes of 1/3 and 1/2 EV); with additional options available equivalent to approximately - Nikon Z 50 | Reference Manual - Page 803
C HDMI connector Built-in (can be used with MC-DC2 remote cords and other optional accessories) Stereo mini-pin jack (3.5 mm diameter; plug-in power supported) Stereo mini-pin jack (3.5 mm diameter) Specifications 761 - Nikon Z 50 | Reference Manual - Page 804
Wi-Fi/Bluetooth • Standards: - IEEE 802.11b/g/n (Africa, Asia, Bolivia, and Oceania) - IEEE 802.11b/g/n/a/ac (Europe, U.S.A., Canada, Mexico) - IEEE 802.11b/g/n/a (other countries in the Americas) • Operating frequency: - 2412-2462 MHz (channel 11; Africa, Asia, Bolivia, and Oceania) - - Nikon Z 50 | Reference Manual - Page 805
Wi-Fi/Bluetooth • Communication protocols: Bluetooth Specification Version 4.2 • Operating frequency: Bluetooth - Bluetooth: 2402-2480 MHz - Bluetooth Low Energy: 2402-2480 MHz • Maximum output power (EIRP): - Bluetooth: -0.3 dBm - Bluetooth Low Energy: -1.8 dBm Range (line of sight) - Nikon Z 50 | Reference Manual - Page 806
figures are for a camera with a fully-charged battery. • The sample images displayed on the camera and the images and illustrations in the manuals are for expository purposes only. • Nikon reserves the right to change the appearance and specifications of the hardware and software described in this - Nikon Z 50 | Reference Manual - Page 807
❚❚ MH-25a Battery Charger Rated input AC 100 to 240 V, 50/60 Hz, 0.23-0.12 A Rated output DC 8.4 V/1.2 A Supported batteries EN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 Rechargeable Li-ion Battery Charging time Approx. 2 hours 35 minutes * Time required to charge battery at - Nikon Z 50 | Reference Manual - Page 808
AC Adapter (Supplied with the Z 7II Only) Rated input AC 100-240 V, 50/60 Hz, MAX 0.5 A Rated output DC 5.0 V/3.0 A, 15.0 W Supported batteries Nikon EN-EL15c/EN-EL15b rechargeable Li-ion batteries Operating temperature 0 °C-40 °C (+32 °F-104 °F) Average active efficiency 81.80% Efficiency - Nikon Z 50 | Reference Manual - Page 809
A Notice for Customers in Europe Distributor (Importer for EU Countries) Nikon Europe B.V. Tripolis 100, Burgerweeshuispad 101, 1076 ER Amsterdam, The Netherlands +31-20-7099-000 Commercial registration number: 34036589 ❚❚ EN-EL15c Rechargeable Li-ion Battery Type Rechargeable lithium-ion battery - Nikon Z 50 | Reference Manual - Page 810
D Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially - Nikon Z 50 | Reference Manual - Page 811
among different makes of camera. • Exif version 2.31: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.31 when the images are output on Exif-compliant printers. See the printer manual for details. • HDMI: High-Definition Multimedia Interface is a standard - Nikon Z 50 | Reference Manual - Page 812
Approved Memory Cards • The camera can be used with CFexpress (Type B), XQD, SD, SDHC, and SDXC memory cards. • UHS-I and UHS-II SD cards are supported. • CFexpress or XQD cards with a maximum data transfer rate of at least 45 MB/s (300×), or UHS Speed Class 3 or better SD cards, are recommended - Nikon Z 50 | Reference Manual - Page 813
Portable Chargers (Power Banks) Portable chargers can be used to power the camera or charge the camera battery. The following table lists the portable chargers that have been tested and approved for use, together with the approximate number of shots that can be taken with, and the approximate - Nikon Z 50 | Reference Manual - Page 814
• The only batteries that can be charged from portable chargers are the EN-EL15c and EN-EL15b. • See the documentation provided with the portable charger for information on use. • Use a USB cable with two Type C connectors supplied with the portable charger when employing the device to power the - Nikon Z 50 | Reference Manual - Page 815
Memory Card Capacity The following table shows buffer capacity and the approximate number of pictures that can be stored on a 128 GB 1 card at different image qualities and sizes when [FX (36 × 24)] is selected for [Choose image area]. Actual capacity varies with shooting conditions and the type of - Nikon Z 50 | Reference Manual - Page 816
Image quality Image size File size NEF (RAW), Uncompressed, 12-bit NEF (RAW), Uncompressed, 14-bit Large Large Large JPEG fine 4 Medium Small Large JPEG normal 4 Medium Small Large JPEG basic 4 Medium Small Approx. 66.3 MB Approx. 76.8 MB Approx. 15.7 MB Approx. 10.5 MB Approx. 6.0 MB - Nikon Z 50 | Reference Manual - Page 817
Z 6II: Image quality Image size File size NEF (RAW), Lossless compressed, 12-bit Large Medium Small NEF (RAW), Lossless compressed, 14-bit NEF (RAW), Compressed, 12-bit NEF (RAW), Compressed, 14-bit NEF (RAW), Uncompressed, 12-bit NEF (RAW), Uncompressed, 14-bit Large Large Large Large Large - Nikon Z 50 | Reference Manual - Page 818
Image quality Image size Large JPEG fine 4 Medium Small Large JPEG normal 4 Medium Small Large JPEG basic 4 Medium Small File size Approx. 9.3 MB Approx. 6.4 MB Approx. 3.9 MB Approx. 6.3 MB Approx. 3.8 MB Approx. 2.0 MB Approx. 2.4 MB Approx. 1.7 MB Approx. 1.1 MB Number of exposures remaining 2 - Nikon Z 50 | Reference Manual - Page 819
Battery Endurance The movie footage or number of shots that can be recorded with a fully-charged EN-EL15c rechargeable Li-ion battery 1 is given below. Actual endurance varies with such factors as the condition of the battery, the interval between shots, and the options selected in the camera menus. - Nikon Z 50 | Reference Manual - Page 820
Actions such as the following can reduce battery endurance: • Keeping the shutter-release button pressed halfway • Repeated autofocus operations • Taking NEF (RAW) photographs • Slow shutter speeds • Using camera Wi-Fi (wireless LAN) and Bluetooth features • Using the camera with optional - Nikon Z 50 | Reference Manual - Page 821
To ensure that you get the most from rechargeable Nikon EN-EL15c batteries: • Keep the battery contacts clean. Soiled contacts can reduce battery performance. • Use batteries immediately after charging. Batteries will lose their charge if left unused. 1 EN-EL15b/EN-EL15a/EN-EL15 batteries can also - Nikon Z 50 | Reference Manual - Page 822
AF-Assist Illumination The AF-assist illuminator has a range of about 1.0-3.0 m (3 ft 4 in.-9 ft 10 in.). Some lenses may block the illuminator at certain focus distances. • Remove lens hoods when using the illuminator. • The following lenses interfere with AF-assist illumination: Lenses that - Nikon Z 50 | Reference Manual - Page 823
Trademarks and Licenses • CFexpress is a trademark of the CompactFlash Association in the United States and other countries. • NVM Express is a trademark of NVM Express Inc. in the United States and other countries. • XQD is a trademark of Sony Corporation. • The SD, SDHC, and SDXC logos are - Nikon Z 50 | Reference Manual - Page 824
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Use of the Made for Apple badge - Nikon Z 50 | Reference Manual - Page 825
D Unicode® Character Database License (Unicode® Character Database) The software for this product uses the Unicode® Character Database License open-source software. The terms of the software license are as follows: COPYRIGHT AND PERMISSION NOTICE Copyright © 1991-2020 Unicode, Inc. All rights - Nikon Z 50 | Reference Manual - Page 826
License (NVM Express Driver) The license for the open-source software included in the camera's NVM Express driver is as follows: https://imaging.nikon.com/support/pdf/LicenseNVMe.pdf 784 Trademarks and Licenses - Nikon Z 50 | Reference Manual - Page 827
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Nikon Z 50 | Reference Manual - Page 828
CAUTIONS Modifications The FCC requires the user to be Z 7II/Z 6II notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user's authority to operate the equipment. Interface Cables Use the interface cables sold or - Nikon Z 50 | Reference Manual - Page 829
Customers in Europe CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that electrical and electronic equipment is to be collected separately. The following apply only to users in European countries - Nikon Z 50 | Reference Manual - Page 830
, and Syria (list subject to change). The use of wireless devices may be prohibited in some countries or regions. Contact a Nikon-authorized service representative before using the wireless features of this product outside the country of purchase. The Bluetooth transmitter in this device operates in - Nikon Z 50 | Reference Manual - Page 831
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Nikon Z 50 | Reference Manual - Page 832
FCC/ISED RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless - Nikon Z 50 | Reference Manual - Page 833
of the EU declarations of conformity are available at the following internet addresses: Z 7II: https://imaging.nikon.com/support/pdf/DoC_N1932.pdf Z 6II: https://imaging.nikon.com/support/pdf/DoC_N1929.pdf Wi-Fi • Operating frequency: - 2412-2462 MHz (channel 11; Africa, Asia, Bolivia, and Oceania - Nikon Z 50 | Reference Manual - Page 834
˔ Notice for Customers in Singapore Trade Name: Model: Z 7II Trade Name: Model: Z 6II This device complies with radio-frequency regulations. The content of certification labels not affixed to the device is given below. Complies with IMDA Standards DA103423 ˔ Notice for Customers in Thailand ˔ - Nikon Z 50 | Reference Manual - Page 835
A Certificates Bluetooth and Wi-Fi (Wireless LAN) 793 - Nikon Z 50 | Reference Manual - Page 836
NIKKOR Z 24-70mm f/4 S Lens Manual This section is included as a lens manual for purchasers of the NIKKOR Z 24-70mm f/4 S lens kit. Note that lens kits may not be available in some NIKKOR Z 24-70mm f/4 S are listed below. 12 4 5 6 7 8 9 10 11 13 12 3 14 794 NIKKOR Z 24-70mm f/4 S Lens Manual - Nikon Z 50 | Reference Manual - Page 837
8 Control ring • Autofocus mode selected: In autofocus mode, you can rotate this customizable ring to perform a function selected with the camera. • Manual focus mode selected: Rotate to focus. 9 Lens mounting mark Use when mounting the lens on the camera. 10 Rubber lensmount gasket - 11 CPU - Nikon Z 50 | Reference Manual - Page 838
place. Removing the Lens 1 Turn the camera off. 2 Press and hold the lens release button while turning the lens clockwise. 796 NIKKOR Z 24-70mm f/4 S Lens Manual - Nikon Z 50 | Reference Manual - Page 839
length scale. • If the camera is turned on with the lens retracted, a warning will be displayed. Extend the lens before use. NIKKOR Z 24-70mm f/4 S Lens Manual 797 - Nikon Z 50 | Reference Manual - Page 840
for your subject to appear, we recommend that you do not turn the camera off until the picture is taken. 798 NIKKOR Z 24-70mm f/4 S Lens Manual - Nikon Z 50 | Reference Manual - Page 841
• Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair. • Replace the lens caps when the lens is not in use. • To protect the interior protect it from scratches during transport. NIKKOR Z 24-70mm f/4 S Lens Manual 799 - Nikon Z 50 | Reference Manual - Page 842
, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls. 800 NIKKOR Z 24-70mm f/4 S Lens Manual - Nikon Z 50 | Reference Manual - Page 843
-on filters D Filters Use only one filter at a time. Remove the lens hood before attaching filters or rotating circular polarizing filters. NIKKOR Z 24-70mm f/4 S Lens Manual 801 - Nikon Z 50 | Reference Manual - Page 844
reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice. 802 NIKKOR Z 24-70mm f/4 S Lens Manual - Nikon Z 50 | Reference Manual - Page 845
Index Symbols b (Auto 56, 63 P (Programmed auto 107 S (Shutter-priority auto 108 A (Aperture-priority auto 108 M (Manual 109 U1, U2, U3 (User setting mode)......115 U (Single frame 126, 130 V (Continuous L 126 W (Continuous H 126 X (Continuous H (extended)) 126 E (Self-timer 126 c ( - Nikon Z 50 | Reference Manual - Page 846
Airplane mode 482 All images 211 Animal-detection AF 84 Aperture 108, 109 Apply settings to live view 402 Assign MB-N11 buttons........ 437, 451 Assign remote (WR) Fn button... 482 Attaching a lens 50 Attenuator 373 Auto (Set Picture Control 139 Auto (White balance 95 Auto bracketing 297 - Nikon Z 50 | Reference Manual - Page 847
Detaching lenses 51 Diffraction compensation....288, 369 Diopter adjustment control 13 Direct connection to PC 544 Direct sunlight (White balance).....96 DISP button 25 Distortion control 520 D-Lighting 517 Dual-format recording PB slot .....235 Dynamic-area AF 78 E Easy Connect 551 Easy - Nikon Z 50 | Reference Manual - Page 848
Low sensitivity (Lo 119 Low-light AF 389 M MAC address 489 Main command dial 16 Manage Picture Control........ 278, 367 Manual (Shooting mode 109 Manual focus 75, 91 Manual focus ring in AF mode.... 391 Matrix metering 157 Max. continuous release 396 Memory buffer 129 Memory card 45, 770 - Nikon Z 50 | Reference Manual - Page 849
234 Playback menu 232 Portrait (Set Picture Control)..........139 Power battery pack 702, 710 Power connector 733 Power off delay 61, 395 Preset manual (White balance).....97, 148, 272 Press the shutter-release button all the way down 61 Press the shutter-release button halfway 60 Primary - Nikon Z 50 | Reference Manual - Page 850
Selected images 209 Selecting pictures for upload....... 197 Self-timer 126, 131, 394 Send while off 485 Set Picture Control 139, 275 Set the clock 52 Setup menu 453 Shade (White balance 96 Sharpening (Set Picture Control)143 Shooting data 188 Shutter spd & aperture lock........... 429 - Nikon Z 50 | Reference Manual - Page 851
Wireless transmitter (WT-7)490, 594, 706 Wireless Transmitter Utility 541 WR-R10 479, 631 WT-7 490, 594, 706 Z Zoom 204 Index 809 - Nikon Z 50 | Reference Manual - Page 852
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. SB0K01(11) 6MOA7111-01
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
-
451
-
452
-
453
-
454
-
455
-
456
-
457
-
458
-
459
-
460
-
461
-
462
-
463
-
464
-
465
-
466
-
467
-
468
-
469
-
470
-
471
-
472
-
473
-
474
-
475
-
476
-
477
-
478
-
479
-
480
-
481
-
482
-
483
-
484
-
485
-
486
-
487
-
488
-
489
-
490
-
491
-
492
-
493
-
494
-
495
-
496
-
497
-
498
-
499
-
500
-
501
-
502
-
503
-
504
-
505
-
506
-
507
-
508
-
509
-
510
-
511
-
512
-
513
-
514
-
515
-
516
-
517
-
518
-
519
-
520
-
521
-
522
-
523
-
524
-
525
-
526
-
527
-
528
-
529
-
530
-
531
-
532
-
533
-
534
-
535
-
536
-
537
-
538
-
539
-
540
-
541
-
542
-
543
-
544
-
545
-
546
-
547
-
548
-
549
-
550
-
551
-
552
-
553
-
554
-
555
-
556
-
557
-
558
-
559
-
560
-
561
-
562
-
563
-
564
-
565
-
566
-
567
-
568
-
569
-
570
-
571
-
572
-
573
-
574
-
575
-
576
-
577
-
578
-
579
-
580
-
581
-
582
-
583
-
584
-
585
-
586
-
587
-
588
-
589
-
590
-
591
-
592
-
593
-
594
-
595
-
596
-
597
-
598
-
599
-
600
-
601
-
602
-
603
-
604
-
605
-
606
-
607
-
608
-
609
-
610
-
611
-
612
-
613
-
614
-
615
-
616
-
617
-
618
-
619
-
620
-
621
-
622
-
623
-
624
-
625
-
626
-
627
-
628
-
629
-
630
-
631
-
632
-
633
-
634
-
635
-
636
-
637
-
638
-
639
-
640
-
641
-
642
-
643
-
644
-
645
-
646
-
647
-
648
-
649
-
650
-
651
-
652
-
653
-
654
-
655
-
656
-
657
-
658
-
659
-
660
-
661
-
662
-
663
-
664
-
665
-
666
-
667
-
668
-
669
-
670
-
671
-
672
-
673
-
674
-
675
-
676
-
677
-
678
-
679
-
680
-
681
-
682
-
683
-
684
-
685
-
686
-
687
-
688
-
689
-
690
-
691
-
692
-
693
-
694
-
695
-
696
-
697
-
698
-
699
-
700
-
701
-
702
-
703
-
704
-
705
-
706
-
707
-
708
-
709
-
710
-
711
-
712
-
713
-
714
-
715
-
716
-
717
-
718
-
719
-
720
-
721
-
722
-
723
-
724
-
725
-
726
-
727
-
728
-
729
-
730
-
731
-
732
-
733
-
734
-
735
-
736
-
737
-
738
-
739
-
740
-
741
-
742
-
743
-
744
-
745
-
746
-
747
-
748
-
749
-
750
-
751
-
752
-
753
-
754
-
755
-
756
-
757
-
758
-
759
-
760
-
761
-
762
-
763
-
764
-
765
-
766
-
767
-
768
-
769
-
770
-
771
-
772
-
773
-
774
-
775
-
776
-
777
-
778
-
779
-
780
-
781
-
782
-
783
-
784
-
785
-
786
-
787
-
788
-
789
-
790
-
791
-
792
-
793
-
794
-
795
-
796
-
797
-
798
-
799
-
800
-
801
-
802
-
803
-
804
-
805
-
806
-
807
-
808
-
809
-
810
-
811
-
812
-
813
-
814
-
815
-
816
-
817
-
818
-
819
-
820
-
821
-
822
-
823
-
824
-
825
-
826
-
827
-
828
-
829
-
830
-
831
-
832
-
833
-
834
-
835
-
836
-
837
-
838
-
839
-
840
-
841
-
842
-
843
-
844
-
845
-
846
-
847
-
848
-
849
-
850
-
851
-
852
 |
 |
DIGITAL CAMERA
Reference Manual
En
•
Read this manual thoroughly before using the camera.
•
To ensure proper use of the camera, be sure to read
“For Your Safety” (page xxxv).
•
After reading this manual, keep it in a readily accessible
place for future reference.