Nokia BH-905 User Guide

Nokia BH-905 Manual

Nokia BH-905 manual content summary:

  • Nokia BH-905 | User Guide - Page 1
    Nokia Bluetooth Stereo Headset BH-905 with active noise cancellation User Guide 9216260 Issue 1 EN
  • Nokia BH-905 | User Guide - Page 2
    that this BH-905 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2009 Nokia. All rights reserved. Nokia, Nokia Connecting
  • Nokia BH-905 | User Guide - Page 3
    the headset to a Bluetooth device 9 Disconnect the headset 10 Reconnect the headset 11 Troubleshooting 11 3. Basic use 12 Place the headset over the head..... 12 Active noise cancellation 12 Adjust the volume 12 Calls 13 Listen to music 13 Clear settings or reset 14 4. Battery and charger
  • Nokia BH-905 | User Guide - Page 4
    Introduction 1. Introduction The Nokia Bluetooth Stereo Headset BH-905 with active noise cancellation allows you to handle calls hands-free with a compatible mobile device and listen to music from a compatible music player. Active noise cancellation helps you to use the headset also in noisy
  • Nokia BH-905 | User Guide - Page 5
    class-leading active noise cancellation for stereo headsets and headphones. This novel feed-forward technology cancels more decibels of noise across a wider frequency range than traditional feedback technologies, providing a peaceful and tranquil environment for users wherever they happen to be. As
  • Nokia BH-905 | User Guide - Page 6
    connect the headset to a Bluetooth device or use active noise cancellation, you must charge the battery. See "Charge the battery", p. 7. Connect using Bluetooth connectivity To use the headset with a compatible Bluetooth device, activate Bluetooth connectivity (see "Activate", p. 9) and pair and
  • Nokia BH-905 | User Guide - Page 7
    the AD-71 adapter, and insert the adapter into the headphone connector. ■ Charge the battery Before you can connect the headset to a Bluetooth device or use active noise cancellation, you must charge the battery. Before charging the battery, carefully read "Battery and charger information", p. 15. 7
  • Nokia BH-905 | User Guide - Page 8
    is fully charged, the indicator light turns green. Disconnect the charger from the headset, then from the wall outlet. When the battery charge is low and Bluetooth connectivity is activated, the headset beeps every 5 minutes and the indicator light for charging and active noise cancellation flashes
  • Nokia BH-905 | User Guide - Page 9
    30 minutes, the headset deactivates Bluetooth connectivity automatically. Bluetooth connectivity is also deactivated if you connect the CA-143U audio cable to the headset. ■ Pair and connect the headset to a Bluetooth device If your mobile device supports the A2DP Bluetooth profile and has a music
  • Nokia BH-905 | User Guide - Page 10
    , and set it to search for Bluetooth devices. For instructions, see the user guide of your device . 4. Select the headset from the list of found devices on your mobile device or music player. 5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. If your device
  • Nokia BH-905 | User Guide - Page 11
    able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. ■ Troubleshooting If you cannot connect the headset to your compatible Bluetooth device, do the following: • Ensure that the
  • Nokia BH-905 | User Guide - Page 12
    reduction, for example, on an airplane when Bluetooth connectivity is deactivated and the CA-143U audio cable is not connected to the headset. To activate active noise cancellation, slide the power key for active noise cancellation toward the charger connector. The indicator light for charging and
  • Nokia BH-905 | User Guide - Page 13
    activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 seconds until the mobile device starts voice dialling, and proceed as described in the user guide of your mobile device. To answer or
  • Nokia BH-905 | User Guide - Page 14
    the rewind key. To scroll through the current song quickly, press and hold either key. ■ Clear settings or reset To clear the volume and pairing settings from the headset, deactivate Bluetooth connectivity, and press and hold the multifunction key and the volume up key (for about 5 seconds) until
  • Nokia BH-905 | User Guide - Page 15
    and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. If a battery is being used for the first time or if the
  • Nokia BH-905 | User Guide - Page 16
    . These suggestions apply equally to your device, charger, or any accessory. If any device is not working properly, take it to the nearest authorised service facility for service. Recycle The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all
  • Nokia BH-905 | User Guide - Page 17
    Care and maintenance responsibility organisations, or your local Nokia representative. Check how to recycle your Nokia products at www.nokia.com/werecycle, or if browsing on a mobile device, www.nokia.mobi/werecycle. Wolfson Microelectronics plc is a leading global provider for high performance,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Nokia Bluetooth Stereo Headset
BH-905 with active noise
cancellation
User Guide
9216260
Issue 1 EN