NordicTrack Gx 4.2 Pro Bike English Manual - Page 6

ASSEMBLY •• To watch an assembly video, go to http://productvideo.co/ assembly/nordictrack or use your mobile phone or smartphone to read the QR code at the right. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 5. •• In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Identify the Front Stabilizer (2), and orient it as shown. 1 53 Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 110mm Screws (53). 2. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 110mm Screws (53). 2 2 1 3 1 53 6