NordicTrack Viewpoint 2800 Treadmill Canadian English Manual
NordicTrack Viewpoint 2800 Treadmill Manual
 |
View all NordicTrack Viewpoint 2800 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
NordicTrack Viewpoint 2800 Treadmill manual content summary:
- NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 1
, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-888-936-4266 Mon.-Fri., 8:00 until 17:00 EST (excluding holidays) OR E-MAIL US: [email protected] CAUTION Read all precautions and instructions in this manual before using - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 2
13 HOW TO FOLD AND MOVE THE TREADMILL 32 TROUBLESHOOTING 34 CONDITIONING GUIDELINES 37 PART LIST 38 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY Back Cover Note: An EXPLODED DRAWING is attached in the center of this manual. NordicTrack is a registered trademark of ICON IP, Inc - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 3
move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 34 if the treadmill is not working properly.) 15. Read, understand, and test the emergency stop procedure - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 4
procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 29. The treadmill is intended for in-home - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 5
of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for INSTRUCTIONS The decals shown here have been placed on the treadmill. If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 6
Thank you for selecting the revolutionary NordicTrack® C2800 treadmill. The C2800 treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when you're not exercising, the unique C2800 treadmill can be folded up, requiring less - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 7
or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply needed for assem- bly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 8
Base Pad that becomes worn. With the help of a second person, carefully tip the treadmill down so the four Base Pads (81) are resting on the floor and the 73 4. Remove the band securing the TV Cable (115) to the left 4 Upright (85). Connect the TV Cable to the cable extend- ing from the console - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 9
into the right side of the left Upright (85). Make sure that the TV Cable in the left Upright is not pinched by the Latch Insert. Press the 92 85 77 Spring Collar Pin 7. Place the treadmill in the storage position (see HOW TO 7 FOLD AND MOVE THE TREADMILL on page 32). Hold the cylinder end of - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 10
cord. With the help of a second person, lower the Frame (55) to the floor. 108 114 Bracket 9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt (see page 35). To - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 11
2. Plug in the power cord of your VCR. See your VCR user's manual for proper grounding instructions. Combination VHF/UHF Antennas 300 Ohm Flat Wire 3. Connect the 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord. Note: To operate the television with your - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 12
If you purchase the optional chest pulse sensor (see page 31), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove 1 the indicated Screws (99) and the two Console Screws 98 (32) from the Console Base (98). - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 13
and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets. This product is for use (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 14
heart rate using ber on the front cover of this manual. the handgrip pulse sensor or the optional chest pulse sensor (see page 31). With the treadmill incline of the treadmill as it guides(NTLXWXhXeXtXhe.0r)you select the manual mode or a program, you through an effective workout. You can even - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 15
main menu includes four options: ODOMETER, SELECT USER, USER SETUP, and TREADMILL SETUP. To highlight options within the main menu, press the up and 3 Designate yourself as User 1 or User 2. The console can keep track of information and save settings for two different users. Highlight the words - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 16
. The console also features a "demo mode" that can be used while the treadmill is displayed in a store. While the demo mode is selected, the power cord main menu, highlight EXIT and then press the Enter button. HOW TO USE THE MANUAL MODE 1 Insert the key into the console. See HOW TO TURN ON THE - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 17
walk or run on the treadmill, the display can show the following workout information: • The elapsed time manual mode is selected, the console offers eight display modes. The display mode that you select will determine which workout display mode shown below, your heart rate will be shown in place of - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 18
sensor at the same time, the display will not show your heart rate accurately. To use the handgrip pulse sensor, first remove the sheets of the treadmill to the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the storage position or the treadmill will - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 19
display for a moment (or flash in the display, depending on which display mode is selected) to alert you. When the first segment ends, the treadmill will automatically adjust to the speed and incline settings for the second segment. The program will continue in this way until the small arrow reaches - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 20
of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 6 Measure your heart rate if desired. See step 7 on for up to 30 segments. When you are finished with your workout, press the Stop button twice. The Custom program will then be - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 21
press the Stop button twice at any time before the program ends. 6 Measure your heart rate if desired. See step 7 on page 18. 7 Turn on the fan if desired the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings that you programmed - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 22
setting, the speed of the walking belt or the incline of the treadmill will automatically change to bring your heart rate closer to the target heart rate setting. Each time the speed or incline changes, the speed setting and the incline setting will appear at the top of the display for a moment ( - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 23
override the setting by pressing the Speed or Incline buttons; however, when the console compares your heart rate to the current target heart rate setting, the speed or incline of the treadmill may automatically change. To stop the program at any time, press the Stop button. To restart the program - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 24
stereo, or computer. See pages 24 and 25 for connecting instructions. To use iFIT programs directly from our Web site, the treadmill must be connected to your computer. See page 25 for connecting instructions. To use iFIT video programs, the treadmill must be connected to your VCR. See page 26 for - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 25
CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of a long 3.5 mm to RCA stereo audio cable (available at electronics stores) into the input jack - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 26
; if you are using an iFIT videocassette, insert the videocassette into your VCR. A moment after the Play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer's instructions. 26 - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 27
are too high or too low, you can manually override the settings at any time by pressing the 26. Note: If the speed and/or incline of the treadmill does not change when a "chirp" is heard: • flat surface instead of on the console. 6 Measure your heart rate if desired. See step 7 on page 18. 7 Turn on - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 28
service manually instructions to start the program. When you start the program, an on-screen countdown will begin. 8 Return to the treadmill and stand on the foot rails. Find the clip attached to the key and slide the clip onto the waistband of your clothes. 10 Measure your heart rate - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 29
: Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill. See page 11 for instructions. Follow the steps below to operate the television. 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 30
is selected, the display will show the total number of hours that the treadmill has been used and the total number of miles or kilometers that the walking into the television's memory (see step 5 on this page), you can manually add channels or delete unwanted channels. To add or delete a channel, - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 31
treadmill. To increase the firmness of the walking platform, step off the treadmill and slide the cushion adjusters toward the front of the treadmill firmness level. The faster you run on the treadmill, or the more you weigh, the firmer the two heart rate programs. To purchase the optional chest pulse sensor - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 32
the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 33
your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the latch knob. 2. Hold the metal frame firmly with both hands, and lower the frame to - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 34
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 35
in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. b 3"-4" Rear Roller Bolts c. If the walking belt still slows when walked on, see the front cover of this manual. PROBLEM: The walking belt is off-center or slips when - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 36
AN ANTENNA on page 11.) b. Check for the problems listed below and follow the applicable instructions. • Ignition (black spots or horizontal streaks that appliances. Try changing the position of the treadmill or other electric appliances to correct the problem. • Ghosts-Ghosts are caused by the - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 37
. For aerobic exercise, adjust the speed and incline of the treadmill until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Each workout should include the following three parts: A Warm-up-Start each workout with 5 to 10 minutes of stretching and light exercise - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 38
Warning Decal 3/4" Screw Adjustor Guide Screw Latch Catch Isolator Front Platform Screw Belt Guide Belt Guide Screw Frame Pivot Bolt Walking Platform Walking Belt Front Roller Magnet Frame Spacer Nut Reed Switch Clip Reed Switch 1/2" Screw Hood Cover Foam Drive Motor Motor Belt Rear Foot Bolt Right - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 39
Roller Bracket Small Foot Rail Screw 1/4" Washer Key No. Qty. Description 114 1 115 1 #1 #1 #1 #1 #1 Shock TV Cable 12" Blue Wire, 2F 8" Blue Wire, M/F 8" Green Wire, F/Ring 4" Red Wire, M/F User's Manual #These parts are not illustrated Specifications are subject to change without notice. 39 - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 40
EXPLODED DRAWING-Model No. 30602.0 To identify the parts shown on this exploded drawing, see the PART LIST on pages 38 and 39 of the USER'S MANUAL. 2 1 2 2 7 2 112 10 7 12 4 8 9 8 8 3 13 6 5 13 15 116 109 111 62 13 5 116 60 57 109 64 27 49 60 29 39 62 111 57 39 - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 41
EXPLODED DRAWING-Model No. 30602.0 105 99 95 7 99 99 98 71 115 72 67 72 73 71 99 100 86 46 83 99 23 83 7 92 103 77 76 72 67 72 99 99 99 83 70 99 78 7 99 87 67 84 97 88 101 81 106 82 79 7 102 80 101 81 82 73 87 67 102 80 7 79 107 101 85 89 81 20 101 78 93 107 - NordicTrack Viewpoint 2800 Treadmill | Canadian English Manual - Page 42
(NordicTrack C2800 treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
 |
 |
USER'S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number
Decal
Model No. 30602.0
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
www.nordictrack.com
Visit our website at
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-936-4266
Mon.–Fri., 8:00 until 17:00 EST
(excluding holidays)
OR E-MAIL US: