Oki B4500 B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&a
Oki B4500 Manual
View all Oki B4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki B4500 manual content summary:
- Oki B4500 | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&a - Page 1
the printer Menu. 5. Install the Serial Interface Card: a. Align the connector at the bottom of the card with the connector on the main board. b. Align the tabs at the panel bottom with holes in printer frame. c. Swing panel up and into place. d. Replace the screw. © 2009 Oki Data Americas, Inc - Oki B4500 | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&a - Page 2
est installée correctement. Pour modifier les paramètres RS232-C : Consultez le Guide de l'utilisateur sur le CD fourni avec l'imprimante pour des directives sur la sélection des paramètres de l'interface dans le menu Printer (Imprimante). 5. Installez la carte d'interface série : a. Alignez le - Oki B4500 | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&a - Page 3
Instrucciones de Instalación, Tarjeta de Interfaz en serie RS232-C 1. Desempaque la tarjeta de serie y retire todo material protector. 2. Apague la impresora. Desenchufe el cable de alimentación y el cable de interfaz. 3. Retire el tornillo del panel de acceso. 4. Levante el panel de acceso. Nota: - Oki B4500 | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&a - Page 4
. c. RS232C MENU deve aparecer na segunda coluna. Se não aparecer, verifique se a placa está instalada corretamente. Para mudar as configurações RS232-C: Consulte o Manual do Usuário no CD que acompanha a impressora para obter instruções sobre como selecionar as configurações da interface no menu da
English
1. Unpack the serial card and
remove any shipping materials.
2. Turn off the printer.
Remove
the power cord and interface
cable.
3. Remove the access panel
screw.
4. Lift off the access panel.
5. Install the Serial Interface
Card:
a. Align the connector at the bot-
tom of the card with the con-
nector on the main board.
Note:
It helps to align the screw
holes (1) to position the card
correctly.
b. Press the card down until the
connectors are fully engaged
and the card is securely
installed.
6. Insert and tighten the screws.
7. Replace the access panel:
a. Snap off the breakout tab .
b. Align the tabs at the panel
bottom with holes in printer
frame.
c. Swing panel up and into place.
d. Replace the screw.
8. Verify the installation:
Print a MenuMap
a. Press the Menu button one or
more times until INFO.MENU
appears on the display.
b. Press SELECT twice. The
MenuMap prints.
c. RS232C MENU should appear
in the second column. If it
isn°t there, check to be sure
that the card is installed cor-
rectly.
To change RS232-C settings:
See the User°s Guide on the CD
included with your printer for
instructions to select interface
settings in the printer Menu.
English
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fran°ais. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Espaæol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PortuguŒs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
58366402
For RS232-C Serial Interface Card
Installation Instructions
Directives d’ installation
Instrucciones de Instalaci±n
Instru°ıes de instala°ªo
' 2009 Oki Data Americas, Inc