Oki B4600n B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran&
Oki B4600n Manual
View all Oki B4600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki B4600n manual content summary:
- Oki B4600n | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran& - Page 1
in the printer Menu. 5. Install the Serial Interface Card: a. Align the connector at the bottom of the card with the connector on the main board. b. Align the tabs at the panel bottom with holes in printer frame. c. Swing panel up and into place. d. Replace the screw. © 2009 Oki Data Americas - Oki B4600n | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran& - Page 2
gative, vérifiez que la carte est installée correctement. Pour modifier les paramètres RS232-C : Consultez le Guide de l'utilisateur sur le CD fourni avec l'imprimante pour des directives sur la sélection des paramètres de l'interface dans le menu Printer - Oki B4600n | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran& - Page 3
en el CD que vino con su impresora para mayor información sobre cómo seleccionar la configuración de la interfaz en el menú de la impresora. 5. Instale la tarjeta de la interfaz en serie: a. Alinee el conector de la parte inferior de la tarjeta con el conector de la tarjeta principal. b. Alinee - Oki B4600n | B4400, B4500, B4600 Serial I/F Install Instructions (English, Fran& - Page 4
placa está instalada corretamente. Para mudar as configurações RS232-C: Consulte o Manual do Usuário no CD que acompanha a impressora para obter instruções como selecionar as configurações da interface no menu da impressora. 5. Instale a placa de interface serial: a. Alinhe o conector da parte
English
1. Unpack the serial card and
remove any shipping materials.
2. Turn off the printer.
Remove
the power cord and interface
cable.
3. Remove the access panel
screw.
4. Lift off the access panel.
5. Install the Serial Interface
Card:
a. Align the connector at the bot-
tom of the card with the con-
nector on the main board.
Note:
It helps to align the screw
holes (1) to position the card
correctly.
b. Press the card down until the
connectors are fully engaged
and the card is securely
installed.
6. Insert and tighten the screws.
7. Replace the access panel:
a. Snap off the breakout tab .
b. Align the tabs at the panel
bottom with holes in printer
frame.
c. Swing panel up and into place.
d. Replace the screw.
8. Verify the installation:
Print a MenuMap
a. Press the Menu button one or
more times until INFO.MENU
appears on the display.
b. Press SELECT twice. The
MenuMap prints.
c. RS232C MENU should appear
in the second column. If it
isn°t there, check to be sure
that the card is installed cor-
rectly.
To change RS232-C settings:
See the User°s Guide on the CD
included with your printer for
instructions to select interface
settings in the printer Menu.
English
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fran°ais. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Espaæol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PortuguŒs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
58366402
For RS232-C Serial Interface Card
Installation Instructions
Directives d’ installation
Instrucciones de Instalaci±n
Instru°ıes de instala°ªo
' 2009 Oki Data Americas, Inc