Oki C6000n OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print
Oki C6000n Manual
View all Oki C6000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C6000n manual content summary:
- Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 1
- Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 2
Copyright © 2007 by Oki Data Americas, Inc. All Rights Reserved Document Information OkiLAN 8300e Network User's Guide, C6000n and C6100 Series manuals are available from the web site: http://www.www.okiprintingsolutions.com Trademark Information Oki and Microline are registered trademarks of Oki - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 3
Setup Using AdminManager 20 Installation 21 Interface 23 File menu 23 Status Menu 24 Setup Menu 25 Oki Device Setup 26 General Tab 27 TCP/IP Tab 27 Netware Tab 29 EtherTalk Tab 32 NetBEUI PrintSuperVision 68 OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Table of Contents - 3 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 4
XP 88 OKI LPR 88 Port 9100 89 IPP 90 Novell Netware IPX 92 NetBEUI Protocol 92 Network Printer Settings 92 Windows 95/98/Me 93 Windows NT 4.0 93 Windows 2000 94 Windows XP 95 Printer driver configuration 96 Novell NetWare 98 OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 5
Sheet .120 Installation 121 Macintosh Printer Setup 122 OS X.1 and above 122 Troubleshooting 123 Self-diagnostic test 123 TCP/IP 123 NetWare 125 Remote Server mode 125 Print Server mode 126 EtherTalk 127 NetBEUI 128 OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Table of - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 6
server supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP and can detect those frame types automatically. Also, it supports major printers, change the emulation in the Printer Menu settings to Auto or PS before printing the self-diagnostic test and settings. OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 7
ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP NetBEUI SMB, NetBIOS DDNS, WINS, Rendezvous/Bonjour Self-diagnostic test printing Banner supported Monitoring/configure by Web browser Printer status notification by E-Mail OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 7 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 8
release. The self-diagnostic test results and configuration settings are printed. Printed self-diagnostic test sample If "NG" is displayed instead of "OK" see the "Troubleshooting" chapter. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 8 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 9
Printed configuration settings sample networkinfo_pg1.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 9 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 10
networkinfo_pg2.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 10 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 11
Gateway for TCP/IP manually or by using DHCP. > Set NetWare Mode and create Queue/Print Server/Printer objects. > Zone name Netscape 3.0 and higher. Operating Navigator. system that supports Web browser. AdminManager Configure the print server in Guide, C6000n and C6100 Series Configuration - 11 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 12
Utility SNMP Features System requirements The printer and print server can be controlled using third-party vendor developed SNMP application. Third-party vendor developed SNMP application. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 12 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 13
for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > PC that is located in the same segment as the printer. To create a NetWare queue, NetWare Client 32 or example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 14
Select [Install Quick Setup Utility]. install_configbut.gif 4. Select the language. admgr_qsetbut.gif sel_lang.gif 5. Select OKI Device Quick Setup. sel_quicksetup.gif 6. Follow the on-screen instructions. quicksetup.gif OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 14 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 15
network card but the network card is still operating with pre-transmission settings. 8. Click [Finish] to validate the new settings. Depending on the model, the printer may have to be switched off and on again. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 15 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 16
using TCP/IP, its settings and the printer menu settings can be configured using a manuals for details of how to launch and use the browser. The network addresses used in this manual (Location/ Position)] and press the [Enter] key. The Printer Status screen is displayed. status.jpg 2. Click on a tab - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 17
] in User name and your password (default is the last six digits of the Ethernet address) in Password and click [OK]. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 17 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 18
diagnostic test. The root password can be changed to allow you to configure the print server and printer by using a Web browser. The default password is the last six digits of the MAC address ] then select [Submit] button. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 18 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 19
The root password for configuration via Web browser is different for AdminManager/TELNET/FTP. These passwords can be set in AdminManager or TELNET. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 19 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 20
connected to the network with TCP/IP or IPX/ SPX and must be used on a PC that is located in the same segment as the printer. To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed on to your system. The following explanation uses Windows 98 as an - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 21
uses Windows 98 as an example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer does not start automatically, Utility]. install_configbut.gif 4. Select the language. sel_lang.gif OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 21 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 22
5. Select OKI Device Standard Setup. sel_quicksetup.gif 6. Follow the on-screen instructions. If you want to install AdminManager on your local drive, select [Install and Execute]. Otherwise, select [Execute from CD-ROM]. adminmgr_execute.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 23
Select [Start]→[Programs]→[OKI Setup Utility]→[Admin Manager]. File menu In the [File] menu, the following item can be selected: Item Search Function Search printers in your network and list all printers that have the OkiLAN installed. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 24
Status Displays current OkiLAN configuration. Configuration data can be saved as log file. bmp11.jpg List of Configuration Items Displays current configuration. Configuration data can be saved as log file. bmp13.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 24 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 25
information, see your Windows manual. Create a NetWare queue. Delete NetWare object. Reset the selected network interface card. Print self-diagnostic test pages. Set static IP address of network interface card manually. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 26
Oki Device Setup In this section you can configure the print server. It contains details for the following NetBEUI > SNMP > E-Mail (Send) > SMTP > Maintenance The following section explains each tab's functionality. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 26 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 27
. Check this item if IP address, subnet mask, default gateway and IP addresses for DNS primary server and secondary servers are retrieved from the DHCP or BOOTP server. Otherwise, clear selected network interface card. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 27 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 28
. . . Comments Set IP addresses for DNS primary and secondary servers, and allows you to use DDNS. bmp23.jpg Auto Discovery WINS Server Use in the Configurable Items and Default Values table that starts on page 51. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 28 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 29
want to use the Bindery mode and Bindery Setup button becomes available. If it is unchecked, the button is greyed out. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 29 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 30
Polling Time. Set print job polling interval in seconds. Set NDS tree and context where Print Server was created. bmp26.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 30 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 31
from Available file server list and click >>. The server is copied to Selected file server box. Time Out Set duration from the last data's arrival to freeing of the port in seconds. Set the NetWare printer object name. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 31 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 32
Location Use EtherTalk Protocol Printer Name Zone Name Comments Set EtherTalk protocol to enabled/disabled. Set EtherTalk Printer object name. Set Comments Use NetBEUI Protocol Set NetBEUI protocol to enabled/disabled. Short Printer Name Set a computer name for the OkiLAN. Workgroup Set a - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 33
SysLocation Comments Community names: SNMP Write Community, SNMP Read Community. Set SysContact (printer manager) name. Set SysName (printer model name). Set SysLocation (the location where the printer is installed). OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 33 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 34
Trap, enabled or disabled, when the printer turns to On-Line. Off-Line Set sending a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 34 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 35
a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. Paper Jam Set sending a Trap, enabled or disabled, when a paper jam occurs. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 35 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 36
Location Printer Trap Setup . . . Comments Detail . . . Cover Open Printer Error Set sending a Trap, enabled or disabled, when the printer cover opens. Set sending a Trap, enabled or disabled, when any errors occur. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 36 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 37
Event Mode. Set information to attach. Set User ID and Password. Add comments Set SMTP port number and Reply-To address OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 37 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 38
Server 2 address. Set interval that OkiLAN checks specified events: 1, 12, or 24 hours. Set time. Set Daylight Saving time. bmp34.jpg OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 38 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 39
can setup the following service: Use TCP/IP Protocol Use NetBEUI Protocol Use FTP Service UseTelnet Service Use Web Service Use IPP Service Use SNMP Service Use SMTP Transmit Use encrypted communidation for configuration data OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 40
or not. Select [Yes]. Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 40 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 41
bmp52.jpg Set network addresses that are used to search OKI network interface cards via NetWare protocol. If there any will search all networks that AdminManager can detect. Obtain the printer name via SNMP; Set Community Name. [Search Every]: Set Guide, C6000n and C6100 Series Configuration - 41 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 42
Help Menu In the [Help] menu, [About] is available as well as revision information for AdminManager. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 42 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 43
with the network card. Example: for IP address 172.168.20.127 # ping 172.168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 43 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 44
and try to set temporary IP address. If you still have the problem after resetting the network interface card, consult the network manager. 4. Login Setup EtherTalk 5: Setup NetBEUI 6: Setup printer port 7: Display Status OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 44 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 45
8: Setup printer trap 9: Setup SMTP (E-Mail) 97: Reset to factory set 98: Quit setup 99: Exit setup Please select (1-99)? following hierarchical structure so for more details see the description in the appropriate numbers OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 45 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 46
Subnet - 4: Gateway - 5: RARP protocol - 6: DHCP/BOOTP - protocol 7: DNS server(Pri.) - 8: DNS server(Sec.) - 9: Root password - 99: Back to prior menu - 1: -2 SNMP-3 SNMP-4 SNMP-5 SNMP-6 SNMP-7 SNMP-8 - OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 46 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 47
-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-11 NetWare-12 - - EtherTalk-1 EtherTalk-2 - NetBEUI-1 NetBEUI-2 NetBEUI-3 NetBEUI-4 - OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 47 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 48
- Port-5 6: EOJ string(KANJI) - Port-6 7: Printer type - Port-7 8: TAB size (char.) - Port-8 Trap-6 6: Cover Open trap Trap-7 7: Printer Error trap Trap-8 8: TCP#1-5 Trap address trap Trap-14 6: Cover Open trap Trap-15 7: Printer Error trap Trap-16 8: IPX Trap address Trap- - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 49
5 2: Re-send Interval 3: Off-Line 4: Consumable Message 5: Toner Low/Out SMTP-8 SMTP-9 SMTP-10 SMTP-11 6: Paper Low/Out Mass Storage Error SMTP-16 11: Recoverable Error SMTP-17 12: Service Call Req. SMTP-18 13: Finisher SMTP-19 99: Back to Guide, C6000n and C6100 Series Configuration - 49 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 50
9. Turn the printer off and on again. The network card continues to use pre-transmission settings until the printer is turned off and back on again. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 50 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 51
network card supports SNMPv1, MIB-II and OKI Data Private MIB. The printer's trap address can be set in five places using TCP/IP and in one place with IPX. The printer's trap address (0.0.0.0) Set gateway (default route). OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 51 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 52
for primary DNS server [OKI Device [Network [Setup TCP/ Setup] Configuration]-[T IP]-[DNS -[TCP/IP]- CP/IP]-[Fixed IP server(Sec.)] [DNS Address Server...] Settings]-[DNS -[Secondary Server for security reasons OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 52 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 53
characters up to 255 characters. (Default is null) Set SysContact (printer manager) name [OKI Device Setup]-[SN MP]-[SysNa me] [Network Configuration]-[ General Settings (Disable) Set Authentic Trap, enabled/ disabled OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 53 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 54
. If you have nine or more file servers, you should set file servers here [OKI Device [Network Setup]-[Net Configuration]-[ Ware]-[Print NetWare]-[PServ Server er Name] Mode]-[NetWare polling interval in seconds OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 54 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 55
Printer Mode]- mode]-[Job Setup]-[Tim [Job Timeout] timeout] e Out] 4-255 (10) Set duration from the last data's arrival to freeing the port in seconds EtherTalk-1 [OKI Set Zone Name to which OkiLAN belongs. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 55 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 56
address + -prn1]) Set NetWare printer object name [OKI Device [Network [Setup printer Any Setup]-[Eth Configuration]-[E port Printer 32 characters. Name] (Default is the printer name on which OkiLAN is installed) Set EtherTalk printer object name OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 57
the (Default is null). connected \b Backspace (0x08) \t Tab (0x09) printer before printing job \n Linefeed (0x0a) \v Vertical tab (0x0b) \f Page feed sequence to be sent to the connected printer after printing job OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 57 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 58
) \xnn Hex code [nn] (0xnn) \] Double quote (0x22) \\ Back slash (0x5c) Set an appropriate command sequence to be sent to the connected printer after printing job when data is sent to sjis/euc logical printer/ directory OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 58 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 59
Set page width when data is sent to sjis/euc logical printer/ directory. If the width of one line exceeds this value, Carriage Return and Line Feed are inserted automatical ly. The value 0 means no limitation of the line width OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 60
255 (66) port]-[Page length(line)] Set page length when data is sent to sjis/euc logical printer/ directory. If the number of lines exceeds this value, Form Feed are inserted automatical ly. The value 0 means no limitation of the line width [OKI Device Setup]-[TCP /IP]-[Use FTP/LPD Banner] [Setup - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 61
or disabled, when the printer turns to OFF-LINE Set sending a trap, enabled or disabled, when paper is out Set sending a trap enabled or disabled when a paper jam occurs Set sending a trap enabled or disabled when the printer cover opens OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 62
to five IP addresses [OKI Device [Network [Setup printer Setup]-[SN Configuration]-[ trap]- MP]-[Printer SNMP Traps]- [Setup IPX printer trap]- [Setup IPX trap] - [Paper Out trap] ENABLE/ DISABLE Set sending a trap enabled or disabled when paper is out OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 63
trap packet will be sent [OKI Device [Network Setup]-[SN Configuration]-[ MP]-[Printer SNMP Traps]Trap Setup . [Trap . .]-[IPX] Destination]-[IP X] [Setup printer trap]- [Setup IPX trap] via SMTP, enabled or disabled. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 63 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 64
of SMTP [OKI Device [Network [Setup SMTP Setup]-[SM TP]-[E-Mail Address] Configuration]-[E (E-Mail)]- mail [E-Mail Settings]-[Email address] Transmit Settings]- [Printer Email Address] when DISABLE is selected OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 64 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 65
1-5] - [Toner Alert Low/Out] Assignments]-[T oner Low Toner Out] ENABLE/ DISABLE [OKI Device [Network Error] tacker Error] ENABLE/ DISABLE Notes An E-mail is sent when the printer is Off- line if this is enabled An E-mail is sent when Guide, C6000n and C6100 Series Configuration - 65 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 66
ENABLE/ DISABLE An E-mail is sent when any service call request occurs if this is enabled [OKI Device Setup]-[SM TP]-[1-5][Selected condition] [Network m Information][Printer Serial Number] Read only item. Printer serial number is displayed OkiLAN 8300e Network User's Guide, C6000n and C6100 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 67
]-[Syste m Information][Printer Asset Number] TELNET/ Diagnostic test print Available options Notes Any alphanumeric characters up to 8 characters. (Default is null) Set a printer asset number Configurable items vary between printers. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 68
when events occur that affect the functionality of printers. > Creating statistical reports about usage of printers. > Tracking maintenance data related to printers. > Integrating with Oki Data's on-line web support. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 68 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 69
95 is fully supported. Microsoft does not officially support Windows Me-PWS in Windows Me. PrintSuperVision does not support this OS. Also, Microsoft no longer supports Peer Web Service. PrintSuperVision will not work with Peer Web Service. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 70
the frames properly, and the [Back] button may not work correctly. Supported Printers PrintSuperVision provides general management information for OKI and non-OKI printers connected to the network. For OKI printers using OkiLAN print servers, additional details, reports and added features are - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 71
administrator privileges. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer doesn Select [PrintSuperVision]. 4. Follow the on-screen instructions. In the [Edit Data] screen, you can specify a port number for Guide, C6000n and C6100 Series Configuration - 71 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 72
/ Remove]. When the uninstallation is completed, close [Add/ Remove Programs]. In some cases, an empty [Okidat/PrintSuperVision/] directory may be left behind. Delete the directory manually. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 72 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 73
98, Windows 95 and Window NT4.0. The utility is for those OKI printers which support TCP/IP; it redirects printing data to the lpr port of the specified IP address. System Requirement Windows [Welcome] screen is displayed. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 73 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 74
11. Select [Printer] to accept the printer that has been added in the step 1. 12. Enter an IP address at [IP Address] and click [OK]. A printer is added to the main window. Refer to the On-line Help for information on how to use the utility. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 75
a file that has been added after installation exists in the folder to install the OKI LPR utility or the folder to spool, you cannot delete the folder. Delete any unwanted files before running [Uninstall OKI LPR Utility]. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Configuration - 75 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 76
of their operating systems and this is a good reference point for the exact details of each configuration option within Windows. The network printer supports the following protocols that can be used in conjunction with the Windows operating system: > TCP/IP > IPX (Novell NetWare) > NetBEUI OkiLAN - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 77
administrator. 3. If your network environment uses domain names, DNS should be enabled and configured on your system. However, this step is not essential to enable network printing. 4. Restart the operating system. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 77 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 78
[TCP/ IP Protocol] and click [OK]. 6. The Windows NT installation CD-ROM may be required. Follow the remaining dialogue box prompts. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 78 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 79
box, select [Protocol] then click [Add]. 6. In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then click [OK]. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 79 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 80
box prompts. Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 80 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 81
Ethernet address to identify it, and click [Next]. The Ethernet address (MAC Address) of the printer can be found on the self-diagnostic printout, which can be printed by pressing the push-button on an IP address. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 81 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 82
assign the IP address manually. If you are OKI product and print within the network environment of Windows. 10. Confirm your configuration. If everything is correct, select [Execute] to apply the configuration. Set-up has now been completed. Select [Finish]. OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 83
privileges. Oki LPR Please follow the procedure described in the Windows 95/98/Me section on page 83. Microsoft LPR To install this port, the following needs to be carried out. 1. Select [Start], [Settings], [Control Panel] and then select [Printers]. OkiLAN 8300e Network User's Guide, C6000n and - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 84
name "lp" and then click [OK]. 8. Follow the instructions on the screen to finish installing the LPR-compatible printer. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. Insert the printer driver for Windows NT4.0. 1. Select [Start]→[Settings]→[Control Panel] and - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 85
installed on your system. OKI LPR Please follow the Printer], clear the [Automatically detect my printer] check box, and then select [Next]. 5. Select [Create a new port] and then [LPR Port]. 6. Select [Next] and then provide the following information: OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 86
host for the printer you are adding. In [Name of printer or print queue on that server] type lp. Follow the instructions on the screen to finish installing the TCP/IP printer. Port 9100 Status Enabled] is deselected. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 86 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 87
[Next]. 4. Select [Network Printer]. 5. Select [Next]. 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e.g. http://172.168.1.31/ipp/ lp. 7. Select [Next]. 8. Install printer driver. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 88
. OKI LPR Printer], then select [Next]. 4. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then click [Next]. 5. Select [Create a New Port] and [Type Standard TCP/IP Port]. OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 89
attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then click[Next]. 5. Select [Create a New Port] and select [Type Standard TCP/IP Port]. 6. Click [Next]. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 89 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 90
]. 4. Select [A network printer, or a printer attached to another computer]. 5. Click [Next]. 6. Select [Connect to a printer on the Internet or on a home or office network] and type printer URL in text box, e.g. http:// 172.168.1.31/ipp/lp. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 91
7. Click [Next]. 8. Install printer driver OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 91 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 92
supports Novell 3, 4, 5 and 6, and allows print jobs to be directed to the appropriate Novell print queue. Please refer to the relevant section of this manual Comment: Name assigned to the printer PrintServer1 User definable description 1Although Guide, C6000n and C6100 Series Microsoft Windows - 92 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 93
the [NetBEUI Protocol] is not listed, click [Add]. 5. In the [Select Network Protocol] dialogue box, select [NetBEUI Protocol] and click [OK]. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 93 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 94
[Close] in the [Local Area Connection Properties] dialogue box. 7. Click the [Close] button in the [Local Area Connection Status] dialogue box. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 94 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 95
it is not supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on Remote Access Service Connections. 1. In .inf file and then click [Open]. Now the printer has been configured and NetBEUI has been installed; you can configure Windows to print - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 96
1. Set up the printer driver as the default local printer. 2. In the [Start] menu, select [Settings] then [Printers]. 3. Select the relevant printer driver, then [Properties]. the Workgroup name is PrintServer. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 96 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 97
. > Printing cannot be carried out and an error message appears when jobs from other users (including other protocols) are being printed. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Microsoft Windows - 97 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 98
guide is for NetWare administrators. It should be read in conjunction with the relevant Novell NetWare manual. The latest Novell service packs and Novell client versions should be installed. Supported logged in and the printer queue is repeatedly Guide, C6000n and C6100 Series Novell NetWare - 98 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 99
push-button for two seconds and then release. The Ethernet address (MAC Address) of the printer can be found on the self-diagnostic printout, which can be printed by pressing the push- to setup the OkiLan for NetWare. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Novell NetWare - 99 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 100
. Use the OKI Network Card Setup Utility (Quick Setup) or other printer manager software, (AdminManager, Web browser, etc.) to configure the network interface card. For instructions please refer to the Configuration Utility section and online help. OkiLAN 8300e Network User's Guide, C6000n and C6100 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 101
The OkiLAN print server supports many protocols such as to set them up from a UNIX workstation. > The network addresses used in this manual are shown as examples only. Network addresses used in your installation must be generated for 8300e Network User's Guide, C6000n and C6100 Series UNIX - 101 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 102
168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. character is '^]'. EthernetBoard OkiLAN OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 102 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 103
: Display Status 8 : Setup printer trap 9 : Setup SMTP Email 97 : Reset to factory set 98 : Quit setup 99 : Exit setup Please select (1- 99)? 5. Type 1 and press the [Enter] key. Perform the following settings: Please select (1- 99)? 1 OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 104
: DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : root password : " " 99 : Back to prior menu Please select (1- 99)? 6. Log out from the network interface card. Turn the printer off and on again to validate the following settings. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 104 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 105
network card. Example: for host name PRINTER # ping PRINTER If there is no reply, then there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server) or with OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 105 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 106
have the problem after resetting the network interface card, consult the network manager. 4. Register the printer in the /etc/printcap file. Example: for host name PRINTER, to create #touch/usr/spool/PRINTER_lp/PRINTER _lp_errs OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 106 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 107
register remote printers on Open Windows. However, it cannot be used here, as the data recipient and 2.8 (known as Solaris 8) and an OKI printer as examples. The absolute path and method Refer to the workstation manual for more details. 1. Confirm that the IP address of the printer has been set. 2. - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 108
ping command to confirm connection with the network card. Example: for host name PRINTER # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 109
uses HP-UX10.20 and an OKI printer as examples. The absolute path and method of configuring manual for more details. 1. Confirm that the IP address of the printer has been set. See network interface card IP address configuration for more information. OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 110
ping command to confirm connection with the network card. Example: for host name PRINTER # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 111
called PRINTER_lp to print to host PRINTER a. Register the remote printer. # /usr/sbin/lpadmin . # /bin/enable PRINTER_lp d. Enable the printer spooler. # /usr/sbin/lpsched To customise output it using the lpadmin command. Example: for printer PRINTER_lp, with model file called PRINTER_model # / - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 112
# ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by for the OKI printer registered as the print server a. Add the print server. # ruser -a -p okiprinter OkiLAN 8300e Network User's Guide, C6000n and - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 113
and print server okiprinte Queue to be added "printer_lp" Host name of the remote server "printer" Queue name of the remote server "lp" Type of print spooler of the remote server "BSD" Description of printer name OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 113 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 114
Printer Daemon (LPD) is the most common protocol for printing with TCP/IP to a network printer. Refer to the workstation's manual the EUC Kanji code. Logical printer lp sjis euc Printer function For direct output For Shift and euc function only as PostScript printers. BSD-based UNIX Print using - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 115
. If the print data is sent to a logical printer via FTP, it is printed. Refer to the workstation's manual for details of the ftp command. The following explanation uses print file test.prn with printer name okiprinter_lp as an example. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 116
only as PostScript printers. > You can not send data to the root directory printer (or IP address 172.168.20.127). # ftp printer (or ftp 172.168.20.127 Connected to Cprinter 220 EthernetBoard OkiLAN Ver 1.1.0 FTP Server Name (Cprinter:root) : root OkiLAN 8300e Network User's Guide, C6000n - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 117
. Move to the logical directory; it is not possible to output print data to the root directory. 2. Move to the preferable logical directory using the LF code to the CR+LF code. If a binary file converted by the printer driver is transferred, the transfer mode has to be BINARY mode. Example: changing - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 118
, printer status can be verified by specifying the directory after the stat (lp, sjis, euc). Example: displaying network card status ftp> quote stat 211-FTP server status: Connected to: 172.168.20.10.000.00 User logged in: root Transfer type: BINARY OkiLAN 8300e Network User's Guide, C6000n and - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 119
Data connection: Closed. 211 End of status. ftp> Example: displaying the network card status (directory name: lp) ftp> quote stat /lp 211-FTP directory status: Ready 211 End of status ftp> OkiLAN 8300e Network User's Guide, C6000n and C6100 Series UNIX - 119 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 120
guide is for administrators and it should be read in conjunction with the relevant Macintosh manual. The latest Macintosh service packs should be installed. Supported Versions Mac OS X.1 and forward are supported. Printing the Network Interface Card Configuration Sheet The printer's configuration - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 121
, in the CD-ROM drive. 2. Double-click the icon that appears on the desktop. 3. Open the MAC folder. 4. Double-click the Printer Installer icon, click Continue. 5. Installer displays with the driver selected. 6. Select any utilities you want to install. Click Install. OkiLAN 8300e Network User - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 122
or Print Setup Utility. 2. Select OKI TCP/IP from the drop-down menu. 3. Enter the printer IP address. 4. From the Printer Model drop down menu, select your printer model. 5. Click Add. 6. Quit the Print Center. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Apple® Macintosh® - 122 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 123
interface card. Turn the printer off and on again. Confirm the network interface is enabled on the printer. Check there is a response to the interface card command. Check the network cable is correctly connected. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 123 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 124
euc and sjis. Use lp by default as euc and sjis are specific to printers with PostScript available. Incorrect User name on the banner page. If printing with . The Printer name printed is the Logical Directory name. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 124 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 125
the Printer name displayed in the Print Server monitor of the File Server and the NetWare Port name set in the NIC are the same. If there are multiple network interface cards, configure the NetWare Port names to be different. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 126
page cannot be printed in NetWare 3.12 Remote Printer mode. If a PostScript printer is used and a Banner Page is printed, PostScript error is displayed. Turn the banner output Off in the client's printer settings. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 126 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 127
EtherTalk Not identified by the Chooser and the Setup Utility. Turn the printer off and on again. Check the network cable is correctly connected. Change the cable and confirm that the EtherTalk Port name is not blank. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 127 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 128
to Prn1. Check the printer is online. If there is an error message indicating the paper has run out, add more paper and cancel the error. Check whether another user is printing. Print after the other user has finished. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 128 - Oki C6000n | OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 129
Oki Data Americas, Inc. 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620 Tel: (856)235-2600 Fax: (856)222-5320 59385005