Oki C7200 Installing the Duplex Unit for OKI C7200 & C7400 series Printers
Oki C7200 Manual
 |
View all Oki C7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C7200 manual content summary:
- Oki C7200 | Installing the Duplex Unit for OKI C7200 & C7400 series Printers - Page 1
. 4 Place the duplex unit guide rails on the slides, then push the duplex unit all the way into the printer. ® ® Windows PostScript Driver 1 Click Start Settings Printers. The Printers dialog box opens. 2 Right click the OKI C7200 or C7400 PostScript printer icon, then click Properties. 3 Windows - Oki C7200 | Installing the Duplex Unit for OKI C7200 & C7400 series Printers - Page 2
. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers, call 1-800-OKI-DATA (1-800-654-3282). Oki Data Service Centers UNITED STATES Oki Data Americas, Inc. Tel: 1-800-654-3282 Fax: 1-856-222-5247 CANADA Oki Data Americas, Inc. Tel: 800-654-3282 Fax: 905-238-4427
-
1 -
2
 |
 |
Install the Duplex Unit
!
If you will be using the duplex unit to print complex
documents or graphics, you will need to purchase and
install additional memory. For Models C7200 and
C7200n, add 64 MB memory (OKI # 70037401). For
Model C7400n, add 128 MB memory (OKI # 70037501)
1
Unpack the duplex unit and remove any shipping
materials.
2
Turn the printer off, then open the front cover.
3
Locate the slides inside the printer.
4
Place the duplex unit guide rails on the slides, then push
the duplex unit all the way into the printer.
5
Close the front cover.
Installing the Duplex Unit
OKI P/N
70037201
Activate the Duplex Unit in the
Driver
Windows PCL Driver
1
Click
Start
Settings
Printers
.
The
Printers
dialog box opens.
2
Right click the OKI C7200 or C7400 PCL printer icon,
then click
Printing Preferences
(Windows 2000),
Properties
(Windows Me, 98, 95) or
Document Defaults
(Windows NT 4.0).
3
In the
Paper
tab, click
Device options
.
4
Click
Duplex option unit
to select it, then click
OK
.
5
Click
OK
, then close the
Printers
dialog box.
Windows PostScript Driver
1
Click
Start
Settings
Printers
.
The
Printers
dialog box opens.
2
Right click the OKI C7200 or C7400 PostScript printer
icon, then click
Properties
.
3
Windows 2000 and NT 4.0:
a
Click the Device Settings tab.
b
Scroll down to Installable Options and click Duplex.
c
Under Change ‘Duplex’ Setting, click Installed.
Windows Me, 98 and 95:
a
Click the Device Options tab.
b
Click Duplex.
c
Under Change setting for: Duplex, click Installed.
4
Click
OK
, then close the
Printers
dialog box.
Macintosh Driver
1
Activate
Chooser
from the
Apple
menu.
2
Select
LaserWriter 8
.
3
Click
Printer
Setup
.
4
Click
Configure
.
5
Change the
Duplex
setting to
Installed
.
6
Click
OK
twice.
7
Close
Chooser
.