Oki C7200 Replacing the Fuser Unit on C7200 & C7400 series Printers
Oki C7200 Manual
 |
View all Oki C7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C7200 manual content summary:
- Oki C7200 | Replacing the Fuser Unit on C7200 & C7400 series Printers - Page 1
Fuser Unit 120V, OKI P/N 41304001 230V, OKI P/N 41304007 Caution! The fuser unit may be HOT. Be sure to let it cool down before attempting to replace it. 1 Turn the printer off. 2 Pull up on the handle and lift the cover. 5 Unpack the replacement fuser and lower it into the printer, pushing down - Oki C7200 | Replacing the Fuser Unit on C7200 & C7400 series Printers - Page 2
have other rights which vary from state to state. Oki Data Service Centers UNITED STATES Oki Data Americas, Inc. Tel: 1-800-654-3282 Fax: 1-856-222-5247 MEXICO Oki Data de Mexico, S.A. de C.V. Tel: (525) 263-8780 Fax: (525) 263-8785 CANADA Oki Data Americas, Inc. Tel: 800-654-3282 Fax: 905-238
-
1 -
2
 |
 |
Replacing the Fuser Unit
Caution! The fuser unit may be HOT. Be sure to let it cool
down before attempting to replace it.
1
Turn the printer off.
2
Pull up on the handle and lift the cover.
3
Push the blue lock levers at either end of the fuser unit
toward the back of the printer to release the fuser.
4
Grab the handle and lift the fuser out.
5
Unpack the replacement fuser and lower it into the
printer, pushing down until you feel it snap into place.
!
Make sure the blue lock levers at either end of the fuser
have snapped back locking the fuser unit in place. If
not, pull them toward the front of the printer.
6
Pull the fuser roller lock lever toward the front of the
printer, then remove the orange fuser transport lock.
7
Push the fuser roller release lever toward the back of the
printer as far as it will go.
8
Close the printer cover and turn the printer back on.
120V, OKI P/N 41304001
230V, OKI P/N 41304007
Fuser
Unit
(at back
of
printer)