Oki C7200 OKI Genuine Toner Cartridges, Type C2

5. Hold the cartridge in the

vertical

position and

lower the port end of the cartridge into the image

drum so that the tube (1) on the drum slides into

the port (2) on the toner cartridge.

6. Press the cartridge toward the tube on the drum,

then lower the lock lever end, aligning the white

tab (3) with the groove (4) in the drum.

7. Push the lock lever (5) toward the back of the

printer until it stops.

To avoid damage to the printheads, be sure

to push the lock lever (5) back

as far as it

will go.

!

3. Unpack the toner cartridge and shake it back and forth.

4. Hold the cartridge in a horizontal position and remove

the tape.

Port

Lock lever

Removing black drum shown for reference only.

Type

C2

1. Turn the printer off and open the cover.

2. Push the lock lever (1) toward the front of the printer

until it stops.

Lift the right end of the toner cartridge

(2) up and slide out of port.

(Continued on back)

GENUINE Toner Cartridge