Oki C830dtn C830 Network User's Guide

Oki C830dtn Manual

Get Oki C830dtn PDF manuals and user guides View all Oki C830dtn manuals
Add to My Manuals
Save this manual to your list of manuals

Oki C830dtn manual content summary:

  • Oki C830dtn | C830 Network User's Guide - Page 1
    Model C830 Network Features TCP/IP Protocol Network Layer • ARP • IP • ICMP • IPv6 Session Layer • TCP • UDP Application Layer • Oki LPR • Protocol SMB NetBIOS IPX/SPX (NetWare) Protocol Remote Printer Mode (up to eight print servers) Print Server MAC Address Filtering 59310901 my.okidata.com
  • Oki C830dtn | C830 Network User's Guide - Page 2
    Copyright information Copyright © 2008 Oki Data Americas, Inc. All rights reserved. Network User's Guide P/N 59310901 Revision 1.0 Illustrations manuals and/or drivers are available from: http://www.okiprintingsolutions.com Trademark Information Oki and Microline are registered trademarks of Oki
  • Oki C830dtn | C830 Network User's Guide - Page 3
    , etc. Illustrations and components are representative only. Your unit may differ slightly from those pictured in this document. this. An important message provides supplemental information which can prevent potential problems. CAUTION! A caution appears like this. A caution provides additional
  • Oki C830dtn | C830 Network User's Guide - Page 4
    etc 3 Network Configuration Overview 7 Introduction 7 Specifications 8 Printing the Network Configuration Report 9 Configuration Microsoft Internet Explorer 43 Default user name and password 43 Adjusting printer settings 43 Network Configuration using TELNET 44 Example TELNET configuration
  • Oki C830dtn | C830 Network User's Guide - Page 5
    Microsoft Windows 56 Overview 56 Installing a Network Printer 56 Using the Oki Driver Installer 56 Why use the Oki Driver Installer 57 Using the Add Printer Wizard 57 Method summary 57 About the different methods 58 Network Printer IP Address Configuration 59 NetBEUI Protocol 61 Network
  • Oki C830dtn | C830 Network User's Guide - Page 6
    directories 89 Troubleshooting 92 Self-diagnostic Test 92 Printer does not print 92 NG is printed in the self-diagnostic test or Flash ROM Check Registers NG 92 TCP/IP 92 Computer cannot find the network interface 92 Cannot print with lpr and ftp 93 Incorrect user name on the banner page 93
  • Oki C830dtn | C830 Network User's Guide - Page 7
    front cover of this manual for a listing of the items supported by your product. Your unit incorporates a fast 100BASE-TX/10BASE-T network interface. This User's Guide explains the functionality of the built in network interface and details the network interface specifications and several software
  • Oki C830dtn | C830 Network User's Guide - Page 8
    Specifications NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Frame Types • IEEE 802.2 • IEEE 802.3 • Ethernet-II, SNAP, AUTO Network Interface • 100BASE-TX • 10BASE-T Network
  • Oki C830dtn | C830 Network User's Guide - Page 9
    Report To print the Network Configuration report from most units: NOTE If these steps do not work with your unit, check your Setup Guide or the On-line User's Guide (on the CD supplied with the unit) for instructions. 1. Press the ENTER button on your printer to display INFORMATION MENU on the LCD
  • Oki C830dtn | C830 Network User's Guide - Page 10
    the front cover of this manual for a listing of the items supported by your product. You can configure the network interface (NIC) by using one of the following methods: Configuration Utilities Utility Features System Requirements Admin Manager Quick Setup (see page 12) Admin Manager Standard
  • Oki C830dtn | C830 Network User's Guide - Page 11
    . Microsoft Internet Explorer or similar. Operating system that supports Web browser. Configure the NIC using TELNET. Third-party vendor developed TELNET client package. A TELNET Application is standard in Windows/UNIX/ Linux. The printer and network interface can be controlled using third-party
  • Oki C830dtn | C830 Network User's Guide - Page 12
    are supported by every product. See the front cover of this manual for a listing of the items supported by , Subnet Mask and Gateway for TCP/IP manually or by using DHCP. • Set NetWare mode and create Queue/Print Server/Printer objects. • Set the Zone name and printer. Network User's Guide 12
  • Oki C830dtn | C830 Network User's Guide - Page 13
    instructions. 6 7. When the settings are correct, click Execute. The new settings are transmitted to the network interface but it still operates with pre-transmission settings. 8. Click Finish to validate the new settings. 9. Switch the printer off for 15 seconds and on again. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 14
    supported by every product. See the front cover of this manual for a listing of the items supported on a PC that is located on the same segment as the printer. Installation 1. Insert the Network Software CD into the CD-ROM instructions. 3. Accept the Software License Agreement. Network User's Guide 14
  • Oki C830dtn | C830 Network User's Guide - Page 15
    5. Then select Install Admin Manager. 6. Select Oki Device Standard Setup and follow the on-screen instructions. 6 7. If you want to install AdminManager and Execute. Otherwise, select Execute from CD-ROM. Follow the on-screen instructions. 8. To run AdminManager, check Yes for Do you wish to execute
  • Oki C830dtn | C830 Network User's Guide - Page 16
    Programs > Oki Setup Utility > Admin Manager. Explanation of Menu Items Menu File Item Search Status Printer Status Function Search printers in your network and list all printers. Current printer status is displayed: System Status Displays current NIC configuration. Configuration data can be
  • Oki C830dtn | C830 Network User's Guide - Page 17
    printer's TELNET port. Create a NetWare queue. Note: Only visible when using Netware Delete NetWare object. Note: Only visible when using Netware Reset the selected network interface. Print self-diagnostic test pages. Set static IP address of network interface manually. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 18
    by every product. See the front cover of this manual for a listing of the items supported by your product. Device Setup allows you to configure the network interface. Type the root password (default value is the last 6 characters of the MAC address) to configure. Remember that the root password is
  • Oki C830dtn | C830 Network User's Guide - Page 19
    General Tab This allows you to set or change the root password used for Admin Manager, TELNET and FTP. Explanation of General Tab Items Item Change root password Explanation You can set/change the root password for AdminManager, TELNET and FTP. Network User's Guide 19
  • Oki C830dtn | C830 Network User's Guide - Page 20
    Use to select Network PnP and Bonjour, and to set device name. DNS Server... Set IP addresses for DNS primary and secondary servers. Network User's Guide 20
  • Oki C830dtn | C830 Network User's Guide - Page 21
    , the following items can be configured: Primary Server Set WINS Primary server. Secondary Server Set WINS Secondary server. Scope ID Set a Scope ID. Network User's Guide 21
  • Oki C830dtn | C830 Network User's Guide - Page 22
    Tab NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. This is where you can configure NetWare available. If it is unchecked, the button is greyed out. Network User's Guide 22
  • Oki C830dtn | C830 Network User's Guide - Page 23
    for Print Server. Job Polling Time. Set print job polling interval in seconds. Set NDS tree and context where Print Server was created. Network User's Guide 23
  • Oki C830dtn | C830 Network User's Guide - Page 24
    Mode. Printer Name By selecting the RPRINTER button, this is displayed: Here you can specify print servers to which the printer can be connected. Time Out Set duration from the last data's arrival to freeing of the port in seconds. Set the NetWare printer object name. Network User's Guide 24
  • Oki C830dtn | C830 Network User's Guide - Page 25
    by every product. See the front cover of this manual for a listing of the items supported by your product. This allows you to configure EtherTalk related items Explanation of EtherTalk Tab Items Item Use EtherTalk Protocol Printer Name Zone Name Explanation Set EtherTalk protocol to enabled
  • Oki C830dtn | C830 Network User's Guide - Page 26
    every product. See the front cover of this manual for a listing of the items supported by your product. This allows you to configure NetBEUI related items Explanation of NetBEUI Tab Items Item Use NetBEUI Protocol Short Printer Name Workgroup Comment Explanation Set NetBEUI protocol to enabled
  • Oki C830dtn | C830 Network User's Guide - Page 27
    manual for a listing of the items supported by your product. This allows you to configure SNMP related items. Explanation of SNMP Tab Items Item Use SNMP Service Set SysContact (printer manager) name. Set SysName (printer model name). Set SysLocation (the location where the printer is installed
  • Oki C830dtn | C830 Network User's Guide - Page 28
    be configured: Printer Trap This community name is Community Name assigned to outgoing printer status traps following details: Printer Reboot Receive Illegal On-Line Off-Line Paper Out Paper Jam Cover Open Printer Error (any Printer Reboot Receive Illegal On-Line Off-Line Paper Out Paper Jam
  • Oki C830dtn | C830 Network User's Guide - Page 29
    cover of this manual for a listing of the items supported by your product. This allows you to configure SMTP related items. Explanation of E-Mail (Send) Tab Iems Item Explanation Use SMTP Transmit Check to enable SMTP SMTP Server Name Enter name of the SMTP server Printer E-Mail Address
  • Oki C830dtn | C830 Network User's Guide - Page 30
    SMTP port number (default is 25) Reply to address Set the E-mail address used for the [Reply to] field in the mail header. Network User's Guide 30
  • Oki C830dtn | C830 Network User's Guide - Page 31
    supported by every product. See the front cover of this manual for a listing of the items supported by your product. Some printers support an email reception function (SMTP/ POP3) allowing the printer to print PDF POP3 Server Password Set a password for the POP3 server. Network User's Guide 31
  • Oki C830dtn | C830 Network User's Guide - Page 32
    : Use Domain Filter Enable/disable domain filtering. Filter Policy Select ACCEPT (the default) or DENY. Domain Filter Define up to five domain filters. Network User's Guide 32
  • Oki C830dtn | C830 Network User's Guide - Page 33
    SNTP Tab NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. In this Tab, you can configure SNTP this is selected, one hour is added to the local time. Saving Network User's Guide 33
  • Oki C830dtn | C830 Network User's Guide - Page 34
    be configured: Use IP FIlter Enable/disable IP Filtering. Default is disabled. Admin IP Address Enter the printer's IP Address. IP Address Range Set up to 10 IP Filter address ranges: [IP FIlter Range Enable/disable changing IP address ranges. Default is disabled. Network User's Guide 34
  • Oki C830dtn | C830 Network User's Guide - Page 35
    Comments The following features can be selected by clicking their check box. TCP/IP Protocol NetBEUI Protocol NetWare Protocol EtherTalk Protocol FTP Service Use Telnet Service Use Web Service Use SNMP Service Use POP3 Protocol Use SNTP Use IPP Use SNMTP Use encrypted communication for configuration
  • Oki C830dtn | C830 Network User's Guide - Page 36
    SSL/TLS Tab NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Explanation of SSL/TLS Tab Items Item Comments Encryption Strength Set the strength of encryption: Strong = highest
  • Oki C830dtn | C830 Network User's Guide - Page 37
    configured: Common Name The printer's IP Address appears here. Organization Enter the name of your organization. Organization Optional. Allows you to enter a Unit subdivision or department name. ending date (month/date/year) for which the certificate is valid. Network User's Guide 37
  • Oki C830dtn | C830 Network User's Guide - Page 38
    printing over the internet. Requires an outside certification service which must be purchased separately. Create Certificate... When printer's IP Address appears here. Organization Enter the name of your organization. Organization Optional. Allows you to enter a Unit bits. Network User's Guide 38
  • Oki C830dtn | C830 Network User's Guide - Page 39
    NOTE Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Explanation of IEEE802.1X Tab EAP User name. Enable SSL/TLS certification. Enable Server Authentication. Network User's Guide 39
  • Oki C830dtn | C830 Network User's Guide - Page 40
    . You can configure the IP address of the printer by this function. 1. Select IP Address Setup from the Setup menu. 2. Set Ethernet Address and IP Address then select OK. 3. The Ethernet Address (MAC address) appears in the Network Configuration report (see page 9). Network User's Guide 40
  • Oki C830dtn | C830 Network User's Guide - Page 41
    IP Tab Set broadcast addresses that are used to search printers using the TCP/IP protocol. If Use TCP/IP NetWare Tab Set network addresses that are used to search printers via NetWare protocol. If there any many NetWare file printer name via SNMP - Select Enter Community name. Add and
  • Oki C830dtn | C830 Network User's Guide - Page 42
    out between AdminManager and the network interface. Help menu In the Help menu, About is available as well as revision information for AdminManager. Network User's Guide 42
  • Oki C830dtn | C830 Network User's Guide - Page 43
    . To change the root password, select "Password Configuration" in the Maintenance tab and follow the on-screen instructions. Adjusting printer settings The network addresses used in this manual are shown as examples only. Network addresses used in your installation must be generated from your own
  • Oki C830dtn | C830 Network User's Guide - Page 44
    manual for a listing of the items supported by your product. CAUTION! Please ensure a valid IP address for your network environment is used. Use of an incorrect IP address can cause serious problems manual. problem with the configuration of the IP address (the IP address has been already set manually
  • Oki C830dtn | C830 Network User's Guide - Page 45
    Ethernet port on the unit) and try to set a temporary IP address. If you still have the problem after resetting the network 'root' logged in. No. MENU (level.1 1:Status / Information 2:Printer Config 3:Network Config 4:Security Config 5:Maintenance 99:Exit setup Please select User's Guide 45
  • Oki C830dtn | C830 Network User's Guide - Page 46
    5. Turn the printer off and on again. NOTE The network interface continues to use pre-transmission settings until the printer is turned off and back on again. Network User's Guide 46
  • Oki C830dtn | C830 Network User's Guide - Page 47
    by every product. See the front cover of this manual for a listing of the items supported by your product. The printer and network interface can be managed via a standard SNMP management station. The network interface supports SNMPv1, MIB-II, Oki Data Private MIB and SNMP V3. In order for the
  • Oki C830dtn | C830 Network User's Guide - Page 48
    printers visually on maps. • Monitoring devices over time and saving data for statistical reports. • Sending email alerts when events occur that affect the functionality of printers. • Statistical reports about usage of printers. • Tracking maintenance data related to printers. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 49
    printer. • Integrating with Oki Data's on-line web support (for US and Canada). • PrintSuperVision can even manage printers Standard Edition 3. Enterprise Edition 4. Datacenter Edition Windows XP Professional Service Pack 1.0 IIS1 MDAC and .Net Framework IIS 6.0 included Network User's Guide 49
  • Oki C830dtn | C830 Network User's Guide - Page 50
    Professional Windows 2000 Server / Advanced Server / Datacenter Server Internet Service Manager included in the OS. Available in the Windows 2000 CD IIS. Supported Browsers The PrintSuperVision application can be accessed from most Windows, Macintosh, Unix, and Linux desktops. User's Guide 50
  • Oki C830dtn | C830 Network User's Guide - Page 51
    settings can be set. For setting any other printer settings, a hyperlink to the printer's web page is provided in PrintSuperVision. Installing Print SuperVision __________ This section describes installing Print SuperVision from the supplied CD-ROM. NOTE Some Operating Systems require administrator
  • Oki C830dtn | C830 Network User's Guide - Page 52
    Programs, select PrintSuperVision from the index window and click Add/Remove. When the uninstallation is completed, close Add/Remove Programs. In some cases, an empty Okidata/PrintSuperVision/ directory may be left behind. Delete the directory manually. Network User's Guide 52
  • Oki C830dtn | C830 Network User's Guide - Page 53
    the front cover of this manual for a listing of the items supported by your product. The Oki LPR Utility is a utility that allows printing data to printers connected to the network via TCP/IP. The utility is for those Oki printers which support TCP/IP. It redirects printing data to the lpr port of
  • Oki C830dtn | C830 Network User's Guide - Page 54
    to launch Oki LPR Utility now printer you will use and click OK. 15. If your printer is not discovered, click Cancel. 16. Enter an IP address at IP Address and click OK. A printer is added to the main window. Refer to the On-line Help for information on how to use the utility. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 55
    Uninstalling the Oki LPR Utility _______ NOTE If a before running Uninstall OkiLPR Utility. 1. Stop the OkiLPR Utility. 2. Select Start > Programs > Okidata > OkiLPR Utility > Uninstall OkiLPR Utility. 3. You may find this under Start > All screen is displayed. Click OK. Network User's Guide 55
  • Oki C830dtn | C830 Network User's Guide - Page 56
    by every product. See the front cover of this manual for a listing of the items supported by your product. Installing a Network Printer __________ There are two ways to set up a Network Printer in Windows: • Install automatically, using the Oki Driver Installer • Install it yourself using the Add
  • Oki C830dtn | C830 Network User's Guide - Page 57
    configuration and sharing of the printer with other Network users • Automatically configures the printer driver with the appropriate hardware device options such as hard disc drive, duplex unit, etc. (via the Oki Network Extension software) Using the Add Printer Wizard Method summary: The following
  • Oki C830dtn | C830 Network User's Guide - Page 58
    IP port simplifies connecting to remote printers using the TCP/IP protocol. Used to connect your printer over TCP/IP using an LPR port to your printer and automatically redirect jobs to other printers on Windows NetBEUI is used for file and printer sharing between computers. It provides a simple
  • Oki C830dtn | C830 Network User's Guide - Page 59
    CD supplied with your unit to configure the IP Address, Subnet Mask and Gateway. NOTES It will not be necessary for printers connected to screen instructions. 4. Accept the Software License Agreement. 5. Select the Optional Utilities tab. 6. Then select Install Admin Manager. Network User's Guide 59
  • Oki C830dtn | C830 Network User's Guide - Page 60
    instructions. 8 8. Select the appropriate network interface, using the Ethernet address to identify it, and click Next. NOTE The Ethernet address of the printer can be found on the Network Configuration printout (see "Printing the Network Configuration Report" on page manually. d. If you are manually
  • Oki C830dtn | C830 Network User's Guide - Page 61
    for printing data from the Macintosh environment. Using NetBEUI protocol Using NetBEUI makes it easy to manage your Oki product and print described in "Device setup" on page 18. Computer Name Name assigned to the printer Workgroup PrintServer1 Comment User definable description 's Guide 61
  • Oki C830dtn | C830 Network User's Guide - Page 62
    may not be supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on a Remote Access Service Connections. 1. In Netnbf.inf file and then click Open. Now the printer has been configured and NetBEUI has been installed, you can configure Windows to print
  • Oki C830dtn | C830 Network User's Guide - Page 63
    the printer driver as the default local printer. 2. In the Start menu, select Settings then Printers. 3. Select the relevant printer driver, then Properties. 4. Click on the Details tab in the printer driver. 5. from other users (including other protocols) are being printed. Network User's Guide 63
  • Oki C830dtn | C830 Network User's Guide - Page 64
    file supplied with your printer and use this to customize the Apple PostScript driver that is built-in to the OS X. Features provided by the PPD file include: • Supported paper types • Paper trays • Printer resolution • Printer color matching NOTE The PPD file must be installed using the Oki Driver
  • Oki C830dtn | C830 Network User's Guide - Page 65
    This copies the printer driver files to the correct location on your Mac OS X system. 3. Make a connection to the printer by USB, TCP/IP, Rendezvous or AppleTalk. See "Connecting to Your Printer" on page 77. 4. If required, enable hardware device options such as duplex unit or printer hard disk. See
  • Oki C830dtn | C830 Network User's Guide - Page 66
    3. Select the destination directory, then click Next. 4. Ensure the Yes option is selected to activate the utility, then click Finish. Network User's Guide 66
  • Oki C830dtn | C830 Network User's Guide - Page 67
    network interfaces. 1. Select the correct printer NIC to configure and choose Setup menu > Oki Device Setup. 2. At the prompt, enter the Admin password. NOTE The default admin password is the last six digits of the MAC Address, minus any punctuation marks. e.g., for a MAC (Ethernet) Address of 00:80
  • Oki C830dtn | C830 Network User's Guide - Page 68
    Oki compatible network interface installed. Printer status monitor Displays the current status of the printer. Printer NIC card summary Displays the network interface summary details. Change settings Use this to configure the network interface settings (requires Admin password). Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 69
    value, then enter the new value and reenter it under Confirm .... NOTE The default admin password is the last six digits of the MAC Address, minus any punctuation marks. e.g., for a MAC (Ethernet) Address of 00:80:87:A4:55:79, the password would be A45579. 3. Click OK. 4. Click Apply. Network User
  • Oki C830dtn | C830 Network User's Guide - Page 70
    . Set the subnet mask of the selected network interface. Set the default gateway of the selected network interface. Use to enable/disable IPv6. Network User's Guide 70
  • Oki C830dtn | C830 Network User's Guide - Page 71
    Item Use NetWare Protocol Print Server Name Frame Type Operation Mode Bindery Setup NDS Setup Printer Name Comments Enable/disable NetWare protocol. Set a Print Server name. Set the primary Context where the Print Server was created. Set the NetWare printer object name. Network User's Guide 71
  • Oki C830dtn | C830 Network User's Guide - Page 72
    EtherTalk Tab Item Use EtherTalk Protocol Printer Name Zone Name Comments Enable/disable EtherTalk protocol. Set the EtherTalk Printer object name. Set the name of the zone to which the print server belongs. Network User's Guide 72
  • Oki C830dtn | C830 Network User's Guide - Page 73
    NetBEUI Tab Item Use NetBEUI Protocol Short Printer Name Workgroup Comment Comments Enable/disable NetBEUI protocol. Set a name for the print server. Set a name for the work group to which the print server belongs. Set the comments for the print server. Network User's Guide 73
  • Oki C830dtn | C830 Network User's Guide - Page 74
    Set the printer model name. SysLocatio Set the location where the printer is installed. n Open web browser Displays the printer web page. Change utility preferences Use this to configure the utility preferences for broadcast addresses for TCP/IP protocol and Time Out. Network User's Guide 74
  • Oki C830dtn | C830 Network User's Guide - Page 75
    Utility Preferences TCP/IP Tab Item Set Broadcast Address Add Delete Comments Set broadcast addresses that are used to search Oki network interfaces using the TCP/IP protocol. Click Add to add the address to the list in the box. Select an address in the box,
  • Oki C830dtn | C830 Network User's Guide - Page 76
    Utility Preferences Timeout Tab Item Set Timeout: Printer Search Set Timeout: Data Send/ Receive Comments [Search Every (20-180sec)] Set the response Retry (1-5)] Sets how many times AdminManager will retry to transmit/receive data to/from the network interface. Default is 3 retries. Network User
  • Oki C830dtn | C830 Network User's Guide - Page 77
    from the Default Browser. 4. Click Add. Depending on the connection type, you may be prompted to configure any additional printer hardware options. If your printer has options such as a hard disk or second tray, switch on the relevant options. 5. Quit Printer Setup Utility. Network User's Guide 77
  • Oki C830dtn | C830 Network User's Guide - Page 78
    is selected in the Print Using menu. 7. Click Add.... You will be prompted to configure any additional printer hardware options. If your printer has options such as a hard disk or second tray, switch on the relevant options. 8. Click Continue. 9. Quit Printer Setup Utility. Network User's Guide 78
  • Oki C830dtn | C830 Network User's Guide - Page 79
    10.3) and Jaguar (10.2) Rendezvous NOTE This utility is called Print Center on Mac OS X 10.2.x. If your printer is already listed, your Mac may already have discovered the printer before you installed the Oki software. In this case, the printer may be using the incorrect PPD file or may not have the
  • Oki C830dtn | C830 Network User's Guide - Page 80
    Printer Setup Utility menu, and choose Quit Printer Setup Utility. After adding the printer, you should configure printer hardware options. Refer to page 82. AppleTalk connection If you have not already done so, run the Oki software installer before following the steps below. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 81
    Applications > Utilities folder. NOTE This utility is called Print Center on Mac OS X 10.2.x. If your printer is already listed, your Mac may already have discovered the printer before you installed the Oki software. In this case, the printer may be using the incorrect PPD file or may not have the
  • Oki C830dtn | C830 Network User's Guide - Page 82
    these must be enabled in the printer driver. 1. Start the Printer Setup Utility. This is located in the Applications > Utilities folder. NOTE This utility is called Print Center on Mac OS X 10.2.x. 2. Ensure that your printer model is selected. 3. Click the Printers menu, and choose Show Info
  • Oki C830dtn | C830 Network User's Guide - Page 83
    to GDI printers. Not all utilities, features or protocols are supported by every product. See the front cover of this manual for a listing of the items supported by your product. Overview Printers support many protocols 8) as an example. The actual commands may differ between Network User's Guide 83
  • Oki C830dtn | C830 Network User's Guide - Page 84
    The Ethernet address (MAC address) 00:80:87:01:00:D2 in the above example can be determined from the Network Configuration report (see page 9). 3. Use no reply, there is a problem with the configuration of the IP address (the IP address has already been set manually or dynamically), or with the
  • Oki C830dtn | C830 Network User's Guide - Page 85
    in. No. Message Value (level .1) 1 : Setup TCP/ IP 2 : Setup SNMP 3 : Setup NetWare 4 : Setup EtherTalk 5 : Setup NetBEUI 6 : Setup printer trap 7 : Setup SMTP (Email) 9 : Maintenance 10 : Setup printer port 11 : Display status 12 : IP Filtering Setup 97 : Network Reset 98 : Set default (Network) 99
  • Oki C830dtn | C830 Network User's Guide - Page 86
    ) is the most common protocol for printing with TCP/IP to a network printer. Refer to the workstation's manual for details of lpr and lp commands. The following explanation in this section uses the printing of print file test.prn with printer name Myprinter_lp as an example. Network User's Guide 86
  • Oki C830dtn | C830 Network User's Guide - Page 87
    delete a print job (Job ID 123) on the myprn_lp # lprm Pmyprn_lp 123 Verify the printer status using the lpq command. • The result of lpq may not be displayed correctly depending on UNIX operating system specification. • While the short format of lpq is a UNIX compatible format, the long format is
  • Oki C830dtn | C830 Network User's Guide - Page 88
    correctly depending on UNIX operating system specification (e.g. Solaris 2.x). FTP printing FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If the print data is sent to a logical printer via FTP, it is printed. Refer to the workstation's manual for details of the ftp
  • Oki C830dtn | C830 Network User's Guide - Page 89
    printer driver. • sjis must be used for printing a text file of Shift JIS Kanji code. • euc must be used for the printing a text file of the EUC Kanji code Logical directory Printer only as PostScript printers. • You can not send data to the root data to the root directory. Network User's Guide 89
  • Oki C830dtn | C830 Network User's Guide - Page 90
    binary file converted by the printer driver is transferred, the transfer mode has to be BINARY mode. Example: Changing transfer mode to binary mode and verifying transfer using the put command are available. Example: Transferring print data test.prn ftp> put test.prn Example: Transferring print data
  • Oki C830dtn | C830 Network User's Guide - Page 91
    . In addition, printer status can be verified by specifying the directory after the stat (lp, sjis, euc). Example: Displaying the network interface status ftp> quote stat 211-FTP server status: Connected to: 192.168.20.10.000.00 User logged in: root Transfer type: BINARY Data connection: Closed. 211
  • Oki C830dtn | C830 Network User's Guide - Page 92
    connected and that the green LED close to the printer's network interface is lit. If not, change the cable and try again. • Open Admin Manager (Start > Programs > Oki Setup Utility > Admin Manager, or run it from the CD supplied with your unit) and run the Self-diagnostic test (Setup > Test Print
  • Oki C830dtn | C830 Network User's Guide - Page 93
    printer the workstation. • Check the printer port name is configured in are specific to PostScript printers. Incorrect user name on the banner page. printer name printed is the logical directory name. NetBEUI The network interface is not identified. • Turn the printer MAC address. • Check if
  • Oki C830dtn | C830 Network User's Guide - Page 94
    Mac Blank pages or garbled text printed. Symptoms: When printing via a USB or TCP/IP connection, you receive blank pages or pages printed with a line of garbled text. Cause: This issue is normally caused by the data being sent to the printer in binary format. The printer . Network User's Guide 94
  • Oki C830dtn | C830 Network User's Guide - Page 95
    the paper. Mac OS X 10.2.3 or greater Possible causes and solutions: • Not enough RAM in the printer to process Oki printer driver contains a Page Rotate option - this may be used to fix the problem. Alternatively, you may be able to rotate the page in your application program. Network User's Guide
  • Oki C830dtn | C830 Network User's Guide - Page 96
    the job remains stalled in the Printer Setup Utility (Print Center). Cause: The Oki printer PostScript Printer Description (PPD) file has a Mac and did not use the Oki Software installer. Solution: Run the Oki printer software installer contained on the CDs that were supplied with your printer.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
v
TCP/IP Protocol
Network Layer
°
ARP
°
IP
°
ICMP
°
IPv6
Session Layer
°
TCP
°
UDP
Application Layer
°
Oki LPR
°
Port 9100
°
FTP
°
HTTP, HTTPS
°
IPP
°
SNMPv1/v3, MIB II
°
TELNET
°
DHCP/BOOTP
°
DNS, DDNS
°
WINS
°
Universal Plug and Play
(UPnP)
°
Rondezvous/Bonjour
°
SNTP
°
SMTP, POP3, APOP
°
POP
°
Web Direct Printing
°
Windows Rally (WSD Print,
LLTD)
NetBEUI Protocol
SMB
NetBIOS
IPX/SPX (NetWare)
Protocol
Remote Printer Mode (up to
eight print servers)
Print Server Mode (up to eight
file servers, 32 queues)
Encrypted Password (Print
Server mode)
NCP, SAP, NLSP, RIP, NDS
EtherTalk Protocol
ELAP, AARP, DDP, AEP, NBP
ZIP, RTMP, ATP, PAP
IEEE 802.1X Protocol
EAP-TLS
PEAP
Configuration Utility
AdminManager
Security
Protocol On/Off
IP Filtering
Admin Password
SSL/TLS
MAC Address Filtering
Model C830 Network Features
59310901
my.okidata.com