Oki C9200dxn Replacing the Fuser Unit for C9200 & C9400 series Printers
Oki C9200dxn Manual
View all Oki C9200dxn manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C9200dxn manual content summary:
- Oki C9200dxn | Replacing the Fuser Unit for C9200 & C9400 series Printers - Page 1
front end (2) until you feel it snap into place. Left Right 1 2 Front 3 Push the blue lock levers (circled) at either end of the fuser unit to the left (toward the open cover) to release the fuser, then lift the fuser out of the printer and discard it. 5 Close the printer cover and turn the - Oki C9200dxn | Replacing the Fuser Unit for C9200 & C9400 series Printers - Page 2
, up-to-date information on service center locations, call 1-800-OKI-DATA (1-800-654-3282). This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Oki Data Service Centers UNITED STATES Oki Data Americas, Inc. 2020 Bishops Gate
4
Unpack the replacement fuser and remove any shipping
materials.
5
Lower the fuser into the printer. Push down on the back
end (
1
) until you feel it snap into place, then push down
on the front end (
2
) until you feel it snap into place.
5
Close the printer cover and turn the printer back on.
Caution! The fuser unit may be HOT. Be sure to let it cool
down before attempting to replace it.
1
Turn the printer off.
2
Pull up on the handle and lift the cover.
3
Push the blue lock levers (circled) at either end of the
fuser unit to the left (toward the open cover) to release the
fuser, then lift the fuser out of the printer and discard it.
120V, OKI P/N 41531401
230V, OKI P/N 41531403
Replacing the
Fuser Unit
Front
Back
Left
Right
2
1