Oki C9200dxn Replacing the Transfer Belt
Oki C9200dxn Manual
 |
View all Oki C9200dxn manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C9200dxn manual content summary:
- Oki C9200dxn | Replacing the Transfer Belt - Page 1
up by the blue Left Right handle. Front 3 Remove the four image drums/toner cartridges, then cover them to protect them from light while you are replacing the Grasp both handles and lift the transfer belt unit out of the printer. 6 Unpack the new transfer belt unit. (Be careful to avoid touching the - Oki C9200dxn | Replacing the Transfer Belt - Page 2
/toner cartridges back into the printer, being careful to place them in the correct color position. 8 Lower the left end of the belt (blue handle) until it snaps into the blue lock levers. 10 Close the cover and turn the printer back on. Limited Warranty: U.S. Oki Data Americas, Inc. (Oki Data
-
1 -
2
 |
 |
4
Press the blue transfer belt lock levers
(circled) to the left
(toward the open cover).
5
Lift the left end of the transfer belt unit up by the blue
handle.
5
Grasp both handles and lift the transfer belt unit out of the
printer.
6 Unpack the new transfer belt unit. (
Be careful to avoid
touching the shiny black surface of the transfer belt.
).
(continued on back)
Caution! The fuser unit (at the left in the printer) may be
HOT. Let it cool down before attempting to replace the
transfer belt.
1
Turn the printer off.
2
Pull up on the handle and open the top cover.
3
Remove the four image drums/toner cartridges, then cover
them to protect them from light while you are replacing
the transfer belt.
Replacing
the Transfer Belt
Front
Back
Left
Right