Oki C9300n C9300/C9500 2nd/3rd Tray Installation Procedures

C9300/C9500

2nd/3rd Tray

Installation Instructions

Tray Part Number: 41945801

58364901

P

HASE

1:I

NSTALL

THE

A

UXILIARY

T

RAY

(

S

)

You can install up to two auxiliary

paper trays on the printer, or one

Auxiliary Tray and one High

Capacity Feeder.

Before you start, find an extra per-

son to help guide you in placing the

printer on the pins.

1.

Unpack the tray(s) and remove the

shipping materials.

2.

Turn off the printer and unplug the

power cord.

3.

Remove the interface cable.

4.

Move the tray into position (paper

tray facing front), noting the

location of the pins (1) and

connector (2).

5.

If you are installing two trays, place

the first tray on top of the second

one, aligning the holes/connector in

the bottom of the upper tray with

pins/connector on the lower tray.

6.

Grasp and lift the printer by the

hand holds on the sides and back.

7.

Lower the printer onto the auxiliary

tray(s), aligning the printer with the

tray(s) and lowering the holes/

connector in the bottom of the

printer onto the pins/connector on

the tray. (It helps to have an extra

person to watch and guide you in

placing the printer on the pins.)

8.

Reattach the interface cable.

9.

Plug the power cord in and turn on

the printer.

10. Access the printer menu and check

to be sure that the printer is

recognizing the newly installed

trays:

a.

Press MENU repeatedly until

MEDIA MENU appears on the

display.

b.

Press ITEM + repeatedly until

you see TRAY2 MEDIATYPE

on the display.

c.

If you installed two trays, press

ITEM + until you see TRAY3

MEDIATYPE on the display.

d. If you do not see TRAY2

MEDIATYPE or TRAY3

MEDIATYPE, the printer is

not properly attached to the

connector on the tray(s) and

you need to lift the printer and

reposition it.

P

HASE

2: L

OAD

P

RINT

M

EDIA

1.

Pull out the tray.

a.

If necessary, lift out the media

indicator at the right end of the

tray and reposition it to corre-

spond with the media you will

normally use in that tray.

b.

Position the paper guides in the

tray.

Caution!

•

The printer weighs 160 lbs. (72

kg); use at least 2 people to lift

the printer.

•

Grasp the printer using the hand

holds on the sides and on the

back.

•

Use proper lifting techniques.

Turn off the printer.

Section	Page
1. Unpack the tray(s) and remove the shipping materials.	1
2. Turn off the printer and unplug the power cord.	1
3. Remove the interface cable.	1
4. Move the tray into position (paper tray facing front), noting the location of the pins (1) and...	1
5. If you are installing two trays, place the first tray on top of the second one, aligning the h...	1
6. Grasp and lift the printer by the hand holds on the sides and back.	1
7. Lower the printer onto the auxiliary tray(s), aligning the printer with the tray(s) and loweri...	1
8. Reattach the interface cable.	1
9. Plug the power cord in and turn on the printer.	1
10. Access the printer menu and check to be sure that the printer is recognizing the newly instal...	1
a. Press MENU repeatedly until MEDIA MENU appears on the display.	1
b. Press ITEM + repeatedly until you see TRAY2 MEDIATYPE on the display.	1
c. If you installed two trays, press ITEM + until you see TRAY3 MEDIATYPE on the display.	1
d. If you do not see TRAY2 MEDIATYPE or TRAY3 MEDIATYPE, the printer is not properly attached to ...	1
1. Pull out the tray.	1
a. If necessary, lift out the media indicator at the right end of the tray and reposition it to c...	1
b. Position the paper guides in the tray.	1
c. For legal size and larger media, position the brackets.	2
2. If using paper, fan it.	2
3. Place the print media in the tray.	2
4. Gently push back in the tray.	2
5. Set the Media Weight. You can use paper up to 54 lb. US Bond (113 lb. Index) in the auxiliary ...	2
a. Press MENU repeatedly until MEDIA MENU appears on the display.	2
b. Press ITEM + repeatedly until you see TRAY2 MEDIAWEIGHT on the display.	2
c. Press VALUE + or VALUE - repeatedly until the desired setting appears on the second line of th...	2
d. Press SELECT to engage the new setting.	2
e. If you installed two trays, go back to step b and repeat the process for TRAY3 MEDIAWEIGHT.	2
f. Press ON LINE to exit the menu.	2
Windows® PCL Driver	2
1. Click Start — Settings — Printers. The Printers dialog box opens.	2
2. Right click the OKI C9300 or C9500 PCL printer icon, then click Printing Preferences (Windows ...	2
3. Click the Device Options tab.	2
4. At Available Tray, set the total number of trays installed (Tray1 + auxiliary trays), then cli...	2
5. Click OK, then close the Printers dialog box.	2
Windows PostScript® Driver	2
1. Click Start — Settings — Printers. The Printers dialog box opens.	2
2. Right click the OKI C9300 or C9500 PostScript printer icon, then click Properties.	2
3. Click the Device Settings tab (Windows XP, 2000 and NT 4.0) or the Device Options tab (Windows...	2
4. Under Installable Options, click Available Tray or (Additional Trays) and select the number of...	2
5. Click OK, then close the Printers dialog box.	2
Macintosh® Driver (OSX)	2
1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection i...	2
Macintosh® PostScript Driver	2
1. Activate Chooser from the Apple menu.	2
2. Select LaserWriter 8.	2
3. Click Printer — Setup.	2
4. Click Configure.	2
5. Change the Available Tray setting to match the number of auxiliary trays installed.	2
6. Click OK twice.	2

Oki C9300n C9300/C9500 2nd/3rd Tray Installation Procedures

Oki C9300n Manual

Oki C9300n manual content summary: