Oki C941dp Digital Print - Envelope Support Guide

Oki C941dp Manual

Get Oki C941dp PDF manuals and user guides View all Oki C941dp manuals
Add to My Manuals
Save this manual to your list of manuals

Oki C941dp manual content summary:

  • Oki C941dp | Digital Print - Envelope Support Guide - Page 1
    OKI Digital Envelope Support Guide Servicing Dealer / Field Engineer Version Ver1.0
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 2
    color to better match Pantone PMS colors and in addition, helps customers produce basic variable data Press The OKI C931DP and C941DP envelope printers are a CMYK digital envelope printer capable of producing full color to offer "White Toner & Clear Toner" (C941DP)  HD Color Printing for breathtaking
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 3
    Envelopes - Selecting the right media The media selected for a specific print job plays an important role in delivering high quality results. In addition to the general quality of the media (texture, weight, composition), the physical design and construction of an envelope must be taken into
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 4
    illustration below, the red circles indicate the location where 4 layers of media overlap on two different envelop designs. Generally, the printer is capable of transferring toner on thick media. However, testing has found that the location of the overlapping layers may create pressure points in one
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 5
    Assembly and Set-up Tips pro900DP Envelope Press (floor planning) Packaged Size (complete system on skid) 55 in. x 62 in. x 35 in. (w x d x h) Packaged Weight (complete system on skid) 530 lb. (240.4 kg) Current Ratings (110V) Printer Feeder Conveyor 110-127V 50/60Hz 10A 115V 50/60Hz 3A
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 6
    to the feeder and conveyor and then finish assembling the feeder (stacker arms, wedge assembly). Preparing printers C931DP / C941DP Envelope Press Preparing the printer for Conveyor The rear tray can either be removed from the printer, or the tray can be modified so that it appears to be in the open
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 7
    position. The last step will be adding the wedge/spring pad assembly that is part of the feeder installation kit. pro900DP Envelope Press Preparing the printer for Conveyor The rear tray is removed from the printer, just like the C931/941DP. Once the rear face up catch tray is removed from the
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 8
    way. 2. Slide the outside arms slightly up and away to disengage from printer. Support arms Outside arms 3. Flip open the top roller assembly and install reflector by peeling protective tape and adhering to area just left of the upper guide. 4. Locate the small white lift arm on each side of the
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 9
    . 6. Pull the release lever on the left side to partially open the tray once the T-lock is removed to remove the tray. Attaching feeder to printer: 1. On the end of the feeder discharge, locate the mounting brackets, reverse them from the shipping position, so that they are open, loose and facing
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 10
    Trouble-free Feeding On a friction feed system, there are two areas where the set-up details, can alleviate a wide variety of envelope feed issues. The wedge
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 11
    few at a time until a small stack forms. Make sure they are pressed firmly against the curved front of the feeder and then slide the wedge below ... Correct wedge placement ... 6) In addition place at least one of the supports at the back of the wedge near the edges. For some envelopes, it's OK
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 12
    guides. The pic below is showing about 1/4". 8) Then at the bottom of the guides we can set the Side rail so that it is supporting the envelope as it gets delivered to the printer there may be excessive delays in delivering sheets to the printer that will get interpreted as 'no paper' or 'paper
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 13
    The following example shows how to set a default mode for our drivers. Setting the envelope settings in the driver, from applications is the same process, and the example below shows the optimum starting point. First locate the Printer Properties for the target device. Then locate the "Advanced" tab
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 14
    using the Com-10 Custom as the page size (in the latest) driver, or by setting the custom size at 9.50" wide, 4.12" the output conveyor. Lastly, set the Color mode ... Graphics Pro setting gives the best chance of preserving color, if the file contains color information (example - was saved as a
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 15
    ). The printer supports envelope sizes that will invoke envelope mode (ex. Com-10) and settings which will allow selection of the media weight / paper type (ex. Com-10 Custom). If there is a mix of settings, the easiest way to eliminate this is to select 'Printer Setting' in the driver and set
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 16
    (this is a key for reliable feeding, image transfer and fusing)  Color and resolution adjustments The Basic Tab Set-up (Windows) After choosing the correct page size, ensure the following are selected in the Basic tab of the driver. o Page Source - should be set to Multi-purpose Tray. This is
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 17
    from the feeder is empty the printer does not attempt to pick pages from driver does not support this function but will support the Preset function to store all settings for a particular type of job (recommended) The Color / Image Quality Tabs The Color tab allows for simple or very detailed color
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 18
    Data  This section will be added to version 2 of this document. Print and Envelope Issues (Troubleshooting not be able to printed in a laser/LED printer without wrinkle, under any circumstances. On the but that was designed more to reduce embossing (pressing lines in the stock from the folded layers
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 19
    , but may impact productivity. 1) All digital printers have cleaning and maintenance cycles. An occasional higher transfer settings, to transfer toner through, and onto the paper. can print 60 envelopes/minute. Printing a high quality color design on well constructed Com-10's, and the Medium heavy
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 20
    Take two pieces, approximately 1" wide of same thickness and place under both the left and right sets of O-rings under the gate. Perform the same drag test as if you were setting up new product as in Step 1. If the gate has proper horizon adjust, there should be equal drag on both sides of the gate
  • Oki C941dp | Digital Print - Envelope Support Guide - Page 21
    first.  The printer offers a range of media settings that influence image transfer strength, speed, and fuser temperature. In many cases, print quality can be improved by adjusting media settings. Heavier media settings may help to ensure toner is being pulled onto the envelope in critical areas
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
OKI Digital Envelope Support Guide
Servicing Dealer / Field Engineer Version
Ver1.0