Oki C9650dn Transfer Belt Installation Instructions
Oki C9650dn Manual
 |
View all Oki C9650dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C9650dn manual content summary:
- Oki C9650dn | Transfer Belt Installation Instructions - Page 1
to protect them from light. 2. Open the top cover. 5. Lift the transfer belt latches to release them. Caution! The fuser is very HOT after the printer has been printing. Be careful not to touch it! © 2009 Oki Data Americas, Inc. 58396901 - Oki C9650dn | Transfer Belt Installation Instructions - Page 2
hazard. 9. Put the image drum/toner cartridge units back into the printer. 10. Close the top cover printer, fitting the pins into the guides at the front and back, then lower the right side. 11. Turn the printer on. 8. Push down on the belt latches to lock the new belt in place. Oki Data Americas
-
1 -
2
 |
 |
Transfer Belt
Installation Instructions
Caution!
The fuser is very HOT after the
printer has been printing. For your
safety, let the printer cool down at
least 10 minutes before attempting
to replace the transfer belt.
To replace the belt unit:
1. Turn off the printer.
Note:
If the hard disk drive is installed in
your printer, press the SHUTDOWN/
RESTART button for several seconds
before turning the printer off.
2. Open the top cover.
Caution!
The fuser is very HOT after the
printer has been printing. Be
careful not to touch it!
3.
Remove the four image drums/toner cartridge
units and place them on a flat surface.
4. Cover them with dark paper or plastic to
protect them from light.
5. Lift the transfer belt latches to release them.
© 2009 Oki Data Americas, Inc.
58396901