Oki GL408e GL408e/GL412e - LAN Card Install Guide

Oki GL408e Manual

Get Oki GL408e PDF manuals and user guides View all Oki GL408e manuals
Add to My Manuals
Save this manual to your list of manuals

Oki GL408e manual content summary:

  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 1
    LAN CARD INSTALLATION GUIDE For printer models: GL 4xxe Series 1 General 1.1 Important information Read this Installation Guide before and during the installation of the above accessTnoehrwisySq. AuKiTceOk egpuproiddtehucpitsr.ovInidsestaimllapotritoannt Ginfuorimdaetiohnaonndhyowfotor setup your
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 2
    All information in this manual have been compiled under due consideration of federal standards and regulations. The manufacturer will not be held liable for damage resulting from: z Disregarding these instructions z Unintended use of the printer z Unauthorized technical modifications z Use
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 3
    LAN Card Installation Guide 1.3 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product,
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 4
    Guide 1.4 . Contact and Document Information SATO GROUP OF COMPANIES International Headquarters Americas SATO INTERNATIONAL PTE. LTD 438A Alexandra Road #05-01/04, Alexandra Technopark, Singapore 119967 Phone: 65-6271-2122 Fax : 65-6271-2151 Email: sales@sato SATO LABELING sato-europe.com SATO
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 5
    card with the two screws removed in Step 1. 4. Connect the printer to the AC outlet and to the host computer with the relevant cables and turn the printer ON. 5. Refer to the Operator's Manual for the procedure to configure the LAN settings. A summary of this procedure is reproduced on the following
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 6
    SETTING Parallel Port USB Port Serial Port Printer Mgt Ignore CR/LF ENTER Ignore CR/LF No* Item No. Check Disable* BCC Check Disable* History Buffer Temporary* Comm. Protocol Status 5* Host Interface Auto Switching SETTING ETHERNET SETTING NetBIOS Protocol NetBIOS Protocol Enable* ASCII Data
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 7
    Switching - the printer automatically switches to the relative interface type and moves into the applicable menus. • Ethernet - factory default Timeout menu. Timeout 10 sec* Switch Out On Data Timeout* INTERFACES ETHERNET SETTING This is the value used by the printer to time out from the current
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 8
    be set for the TCP/IP protocol in four three-digit segments (SEG1 through SEG4). If the IP Address is assigned by Bootp, ARP, or DHCP it is dynamic and read only. The factory defaults for SEG1 through SEG4 are 000, 000, 000, and 000. Note: When changing the IP Address, the printer resets
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 9
    set for the TCP/IP protocol in four three-digit segments (SEG1 through SEG4). If the Gateway Address is assigned by Bootp, ARP, or DHCP, it is dynamic and read only. The defaults for the SEG1 through SEG4 are 000, 000, 000, and 000. Note: When changing the Gateway Address, the printer resets
  • Oki GL408e | GL408e/GL412e - LAN Card Install Guide - Page 10
    LAN Card Installation Guide 10
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
1
General
1.1 Important information
This quick guide provides important information on how to setup your
new SATO product.
LAN CARD INSTALLATION GUIDE
For printer models:
GL 4xx
e
Series
Read this Installation Guide before and during the installation
of the above accessory. Keep this Installation Guide handy for
future reference.