Oki MICROLINE 421 LAN7130E Users Guide

Oki MICROLINE 421 Manual

Get Oki MICROLINE 421 PDF manuals and user guides View all Oki MICROLINE 421 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki MICROLINE 421 manual content summary:

  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 1
    - 1 -
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 2
    control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 3
    ●●Manufacturer Oki Data Corporation, 4-11-22 Shibaura, Minato-ku, Tokyo 108-8551, Japan For all sales, support and general enquiries contact your local distributor. ●●Importer to the EU/Authorized representative OKI Europe Limited (trading as OKI Printing Solutions) Blays House Wick Road
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 4
    Indicates the presence of a hazard for which not following the instructions noted may result in injury. General cautions Do not touch those that are indicated in the User's Manual. Doing so may cause fire. Unplug the power cord and contact a customer service center if the cover is unusually hot,
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 5
    interface card are noted along with troubleshooting. The infomation of a utility and applied setting of network is included,too. ●● Instruction sheet -guide for setup This sheet illiusrates a method to attach a network card to a printer. ●●About This Manual Terms in this document The following
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 6
    following notations may be used in this manual. ●● Microsoft® Windows® 8 64-bit Edition operating system→ Windows 8 (64bit version) * ●● Microsoft® Windows Server® 2012 64-bit Edition operating system→ Windows Server 2012 * ●● Microsoft® Windows® 7 64-
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 7
    About the Product Warranty 2 Manufacturer 3 Importer to the EU/Authorized representative 3 Environmental information 3 For Your Safety 4 Manual Composition 5 About This Manual 5 1. Setup 9 Checking Products 9 Checking Package Contents 9 Part Names of the Network Card 10 Connecting to
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 8
    SSL/TLS 34 Encrypting Communication by IPSec 37 Using SNMPv3...40 Using IPv6...40 Using IEEE802.1X...41 Other Operations 42 Using DHCP...42 4. Troubleshooting 44 If you cannot print 44 If the printer cannot be detected 45 If running directly from the CD-ROM without installing AdminManager 45
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 9
    up is explained in this chapter. ●●Checking Products Checking Package Contents Check that you have everything shown below. ●● Network card ●● Installation guide ●● Network Software CD-ROM ●● Mounting screws (2 pcs.) Note ●● An Ethernet cable is not supplied with your packege. Procure them separately
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 10
    1. Setup 1 ●●Part Names of the Network Card 100 BASE-TX/10 BASE-T connector Connect with a twisted pair cable. Note ●● Switching between 10 BASE-T and 100 BASE TX is automatic. STAT lamp (Orange) Flashes when data is being received. LINK 10M lamp (Green) Lights up when connected by 10 BASE-T LINK
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 11
    install a printer driver software using the provided "CD-ROM". Prepare a computer with a CD-ROM drive. 1. Setup „„Product Requirements Supports the following operating systems: ●● Windows 8/Windows 8 (64bit version) ●● Windows Server 2012 ●● Windows 7/Windows 7 (64bit Version) ●● Windows Vista
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 12
    before this procedure. ●● To complete this procedure, you must be logged in as an administrator. ●● When setting an IP address manually, ask the network administrator or your internet service provider which IP address to use. If the IP address is set wrong, the network may go down or Internet access
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 13
    10 Select the Ethernet address from the list, and then select the printer you want to configure. The Model Name will be displayed as "LAN7130E". Note ●● The Ethernet address is displayed in [NIC Check] in the configuration information of the network. ●● [DHCP/BOOTP protocol] is set to [ENABLE] by
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 14
    Connecting to a Computer 6 Check the printer name in the displayed 1 screen, and click [Next]. 2 When the [Language Selection] screen appears, select the appropriate language and click on [Next]. 1. Setup 7 In the [Printer Sharing] screen, select [Do not share this printer] and click [Next]. 8
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 15
    5 When the [Local or network printer] screen appears, select the [Network printer] and click on [Next]. Connecting to a Computer 8 When the [Printer model and emulation] screen appears, select the 1 Printer model and Emulation, and then click on [Next]. 1. Setup 6 When the [Connection type]
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 16
    1. Setup Connecting to a Computer 12 Check that the [ML5791] icon is 1 displayed. 13 Remove the "Printer Software CD-ROM" from the computer. ‰‰Finish by test printing from a computer. 1 Open a printer driver property. 2 Click Test Print. The installation is complete. - 16 -
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 17
    2012/ Windows 7/ Windows Vista/ Windows Server 2008 R2/ Windows Server 2008/ Windows XP/ Windows Server 2003/ Windows 2000 SP4 For details on the support status of new operating systems, see the Oki Data website. *1 Not included in the "Network Software CD-ROM". Please download from the Oki Data
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 18
    , follow the procedure below. 1 Access the Oki Data website (http:// www.oki.com). 2 Select the utility you would like to use, and follow the onscreen instructions to download. 3 Double-click on the icon of the software downloaded to your computer. 4 Follow the onscreen
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 19
    Windows utility ●●Windows utility This section explains web pages that can be used by both Windows. When using web pages, the following conditions must be met. ●● TCP/IP must be enabled. 2 ●● One of the following must be installed: Microsoft Internet Explorer 6.0 or later. Memo ●● Either set
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 20
    2. Using Utility Software Windows utility Changing the Administrator's password You can change the printer administrator's password from the web page. 2 The administrator's password set on the web page can be used when logging into the printer through the web page. Memo ●● The password should be 4-
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 21
    AdminManager ●●AdminManager You can use the AdminManager to configure the printer network settings and check the status. Operating environment Computer running Windows 8/Server 2012/ Windows 7/Server 2008 R2/Server 2008/ Vista/Server 2003/XP/2000 Computer running with TCP/IP. Note ●● The computer
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 22
    using NetWare. Set if using NetBEUI. Set if using SNMP. Set if using SNTP. Set constraints on network service use. Set if using SSL / TLS. Set if using Kerberos. Set constraints on network service use. 5 If there are no mistakes in the settings, click on [OK]. 6 To enable settings, click on [Yes
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 23
    Quick Setup ●●Quick Setup You can use Quick Setup to easily configure the printer. Operating environment Computer running Windows 8/Server 2012/ Windows 7/Server 2008 R2/Server 2008/ Vista/Server 2003/XP/2000 Computer running with TCP/IP. Note ●● The computer must be on the same segment as the
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 24
    2. Using Utility Software Quick Setup Configuring with Quick Setup 1 Configure TCP/IP, and click on [Next]. 2 Configure NetWare, and click on [Next]. 2 3 Configure NetBEUI, and click on [Next]. 4 Check the settings, and click on [Execute]. Settings are then sent to the printer. 5 To enable settings
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 25
    Adding a Printer You can add a printer to the OKI LPR utility. Note ●● Administrator privileges are required. ●● If you cannot add a printer in Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008, shut down the OKI LPR utility, right-click on [Start] > [All Programs] > [Okidata] > [
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 26
    are required. Memo ●● The IP address may change if DHCP is being used to dynamically assign IP addresses or the network administrator manually changes the printer's IP address. 1 Launch the OKI LPR utility. 2 Select [Setup] from the [Option] menu. 3 Select the [Auto Reconnect] checkbox and
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 27
    TELNET You can configure settings with Telnet commands. Note ●● Telnet access to the printer settings is turned off in the initial settings. In order to use Telnet commands, set [Telnet] to [ENABLE], either on the webpage. ●● For Windows 8/Windows 7/Windows Vista/Windows Server 2012/Windows Server
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 28
    3. Network Settings This chapter provides solutions to the problems you may encounter while operating your printer. Printing . 1 Turn off the printer. Memo ●● Please refer to the printer User's Manual for instructions on turning off the printer. 2 Turn on the printer while holding down the
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 29
    address on your computer. The procedure to check the IP address may differ depending on the version of the operating system. Refer also to the instruction manual of the operating system for details. - 29 -
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 30
    3. Network Settings Setting IP Address For Windows 1 Start up Windows. 2 Select Command Prompt (MS-DOS prompt). Click [Search] from the charm bar, and click [Command Prompt] in the Windows system tools. 3
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 31
    configurations, or when an IP address specified by the network administrator of the company is required, set the specified IP address to the printer manually. The IP address can be set by using the control panel of the printer, etc., For details, please refer to "AdminManager" P.21 and "TELNET
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 32
    > [Email] > [Alert Settings]. 4 Enter an e-mail address to receive the alerts. 5 Click [Setting] for the specified address. 6 Follow the on-screen instructions to specify detailed settings. 7 Click [OK]. 8 Click [Submit]. The network card reboots to enable the new settings. Memo ●● Alert e-mail will
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 33
    's web page and log in as the administrator. 2 Select [Admin Setup]. 3 Select [Network Setup] > [Security] > [IP Filtering]. 4 Follow the on-screen instructions to specify detailed settings. Note ●● If nothing is registered in [Administrator's IP Address Setting], you may not be able to access the
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 34
    page and log in as the administrator. 2 Select [Admin Setup]. 3 Select [Network Setup] > [Security] > [MAC Address Filtering]. 4 Follow the on-screen instructions to specify detailed settings. Note ●● If nothing is registered in [Administrator's MAC Address Setting], you may not be able to access
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 35
    10 Click [Submit]. The setting procedure for a certificate issued by a certificate authority is finished. Opening the Web Page 1 Launch a web browser. 2 Enter "https://your printer's IP address" in the URL address bar and then press the key. Changing Network Settings From the Web Page IPP
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 36
    3. Network Settings Changing Network Settings From the Web Page 7 Enter "http:// your printer's IP address// ipp" or "http://your printer's IP address//ipp/lp" and click [Next]. 3 8 In the [Add Printer Wizard] screen, select [OKI] for [Manufacturer] and [OKI Dot-Matrix 24Pin ESC/P Class Driver] in
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 37
    web page and log in as the administrator. 2 Select [Admin Setup]. 3 Select [Network Setup] > [Security] > [IPSec]. 4 Follow the on-screen instructions to specify detailed settings. Memo ●● Either [ESP] or [AH] must be enabled in the configuration for "Phase2 Proposal". 5 Click [Submit]. The network
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 38
    3. Network Settings Changing Network Settings From the Web Page Configuring Your Computer Memo ●● Be sure to configure the printer before configuring your computer. 1 Click [Start] (In Windows 8, [Settings] from the charm bar) and select [Control Panel]>[Administrative Tools]. 3 2 Double-click [
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 39
    the [Filter Action General Options] screen, select [Negotiate security] and then click [Next]. 37 On the [Communicating with computers that do not support IPsec] screen, select [Do not allow unsecured communication] and then click [Next]. 38 On the [IP Traffic Security] screen, select [Custom] and
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 40
    the on-screen instructions to specify detailed settings. 5 Click [Submit]. The network card reboots to enable the new settings. Using IPv6 Your printer supports IPv6. The printer obtains the IPv6 address automatically. You cannot set the IPv6 address manually. The printer supports the following
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 41
    Using IEEE802.1X Your printer supports IEEE802.1X authentication. Be sure to configure the printer and your computer before performing the following steps. Configuring Your Printer for IEEE802.1X „„Using PEAP 1
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 42
    static IP address, refer to the manual of your DHCP server. Memo ●● The following OSs are supported: --Windows Server 2012, Windows Server 2008 [New Scope]. 13 On the [New Scope Wizard], follow the on-screen instructions and configure the settings as necessary. Memo ●● Be sure to configure the
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 43
    Configuring Your Printer The following explains how to configure your printer to use AdminManager and Windows 8. Note ●● [DHCP/BOOTP] is set to [ENABLE] at the printer's default settings. If the printer is being used for the first time, it does not need to be configured. 1 Turn on the printer. 2 If
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 44
    chapter provides solutions to the problems you may encounter while operating your printer. 4. Troubleshooting ●●If you cannot print Check the network if the power is turned on before connecting the cable. ‰‰If the problem is still not solved With Windows XP, click on [Start] and select [Control
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 45
    or other security software or register AdminManager as an exception. 4. Troubleshooting If using Windows XP (SP1) 1 If using TCP/IP in check box. Note ●● If AdminManager is not displayed in the [Programs and Services] list, click the [Add Program] button, and select AdminManager. If using
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 46
    of the network is then printed. (4) Find the Ethernet address on the first page printed. Ethernet address/MAC address is shown. 4. Troubleshooting 1 In AdminManager, select [Setup] > [Configure IP address]. 2 In the IP address configuration window, enter the Ethernet address just confirmed and the
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 47
    3 The password entry screen will appear. Enter the final six digits of the Ethernet password in the password entry field, and then click on [OK]. 4 Make sure the printer name is displayed in AdminManager. If the printer cannot be detected 4 4. Troubleshooting - 47 -
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 48
    and the printer's port setting on the computer. ●● If using LPR Utility, check the IP address setting in OKI LPR Utility. page 11 page 24 4. Troubleshooting - 48 -
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 49
    utility does not start. Constraints with Windows Server 2003 Service Pack 1 and Windows XP Service Pack 2 4 4. Troubleshooting „„Constraints with Windows Firewall On Windows Server 2003 Service Pack 1 and Windows XP Service Pack 2, the Windows firewall functionality is enhanced. The following
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 50
    5. Appendix „„Network Specifications Interface Protocol Supported browsers 7130E Ethernet 10BASE-T/100BASE-TX TCP/IPv4, TCP/IPv6, SMTP, POP3, HTTP, SNMPv1/v3, DHCP, DNS, LPR, Port9100, BOOTP, ARP, FTP, SLP, Bonjour, Web Services Discovery (WSD), NetWare, NetBEUI Microsoft IE 6.0 or later „„
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 51
    Index Roman M T A AdminManager.......... 17, 20, 21 C Cautions related to safety........ 4 D DHCP 26, 29, 42, 50 DHCP/BOOTP 31 E E-mail 32 Encrypting 34, 37, 40 Ethernet address 13, 22 Ethernet cable 9, 11, 48 F Firewall 49 G Gateway 12, 29, 44 I MAC Address Filtering........... 34
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 52
    4200 Fax:+351 21 470 4201 Website:www.oki.pt E-mail : [email protected] Oki Service Serviço de apoio técnico ao Cliente Tel: 808 200 197 E-mail : [email protected] +74 095 258 6070 e-mail: [email protected] Website: www.oki.ru Technical support: Tel: +7 495 564 8421 e-mail: [email protected] Oki Systems (Österreich)
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 53
    Antonio Sao Paulo, Brazil 04726-170 Tel. +46 (0) 8 634 37 00 e-mail: [email protected] för allmänna frågor om Oki produkter [email protected] för teknisk support gällandes Oki produkter Tel: 55-11-3444-6747 (Grande São Paulo) 0800-11-5577 (Demais localidades) Fax: 5511-3444-3501 e-mail: okiserv@okidata
  • Oki MICROLINE 421 | LAN7130E Users Guide - Page 54
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54