Oki MICROLINE 490 OkiLAN 6020e? Pocket Print Server Userfs Guide
Oki MICROLINE 490 Manual
View all Oki MICROLINE 490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki MICROLINE 490 manual content summary:
- Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 1
OkiLAN 6020e® Pocket Print Server User's Guide High Performance 10/100 Base-T Ethernet Network Print Server - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 2
and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that Tested and Approved logo, Reg. T.M. Novell Corp.; ProPrinter, OS/2 Reg. T.M. TokenRing, T.M., International Business Machines Corp. ii OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 3
for network administrators. The Network Operating System (NOS) and protocol sections are found in Sections III through VI. Section VII contains information and instruction on Windows printing options. With the exception of the Advanced Management Features section, each section in this manual has - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 4
Configuration IV-42 Chapter 6: Telnet Configuration IV-43 Appendix A: Troubleshooting IV-49 Appendix B: Application Considerations IV-56 Appendix C: Internet Printing -3 Chapter 2: OkiView 32 Printer Panel VIII-4 Section IX: Regulatory Information IX-1 Index iv OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 5
LPD protocols. Simple Network Management Protocol (SNMP) and Windows NT are supported in this environment. Driver version 8.x. LAN Manager/LAN Server OS/2 version 1.3 with LAN Manager version 2.x and OS/ 2 version 1.3 or higher with LAN Server version 2.x and higher. OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 6
Technical Support Service Information Note: This information is valid for the United States and Canada only. Oki Data On Line Visit the OKI DATA Web Site at http://www.okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate information • Dealers - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 7
of printer drivers and support for the latest network operating systems. (Customer service representatives are not trained to provide assistance with the use of commercial software packages. Please consult your software user's manual for times and availability of their support). Oki Data Service - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 8
Technical Support Brazil Oki Data do Brasil, Ltda. Tel: 0800-11-5577 Fax: 55-11-5012-0267 Mexico Oki Data de Mexico, S.A. de C.V. Tel: 525-263-8780 Fax: 525-250-3501 viii OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 9
call Technical Support, the following information will help us answer your questions more quickly and accurately. Please be able to identify the following: • OkiLAN model number • Serial number • Configuration sheet settings • Type of network cable connected to the OkiLAN 6020e • Printer(s) make and - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 10
Technical Support x OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 11
Hardware Installation Section I: Hardware Installation - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 12
Section I - Hardware Installation I - 2 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 13
Hardware Installation Section I - Hardware Installation In This Section Powering On the OkiLAN 6020e I-7 Printing a Configuration Sheet I-8 OKI OkiLAN 6020e User's Guide I - 3 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 14
Section I - Hardware Installation I - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 15
6, Adobe PostScriptâ, IBM ProPrinterâ or Epsonâ emulations. The OkiLAN 6020e supports 10/100-megabit networks and most popular network operating systems and printers, except for the OKIPAGE 8z and other GDI-based printers. The OkiLAN 6020e kit includes the following: · OkiLAN 6020e hardware · Power - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 16
Section I - Hardware Installation 3. Secure the OkiLAN 6020e with the wire clips on the printer's connector. 4. Plug the power adapter wire into the power jack on the OkiLAN 6020e. Then plug the power adapter into a 120 VAC wall outlet. Please - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 17
On the OkiLAN 6020e Turn printer power on. The red and green indicators on the OkiLAN 6020e will blink during self-test. When self-test completes successfully, the red indicator will go off and the green indicator will stay on. Green indicator Red indicator OKI OkiLAN 6020e User's Guide I - 7 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 18
supported in the printer) when you run the network configuration utility program. The selected language must match the printer's configured language to print correctly. The content of the configuration sheet will vary depending on your printer and system setup. I - 8 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 19
utility is also provided for the Win32 environment which supports peer-to-peer printing, also known as serverless printing. TCP/IP, DLC and IPX-direct protocols are supported in this serverless network environment. See Section VII, Windows Printing, for details. OKI OkiLAN 6020e User's Guide I - 9 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 20
Setup screen appears automatically (if it doesn't, click Start®Run, then enter D:\setup, if "D" is your CD-ROM drive). 3. Select the utility group for the network OkiNet Utility for NDS (Workstation) OkiNet Connect Windows Printing OkiNet Connect for TCP/IP (Windows 95/98 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 21
, Apple EtherTalk is supported by other OKI print servers but not by the OkiLAN 6020e. Installing OkiView 32 Note: Novell's Client for Windows 95/98, NT or 2000 is required for OkiView 32. Microsoft Client is required only for configuring Novell using a Microsoft network. Insert the OkiView - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 22
a cat-3 or higher rating. Silver Satin or flat ribbon cable is not adequate. c) Connect to a network that a currently working PC or print server is using. If the OkiLAN 6020e is still unable to detect the network cable, contact Technical Support for assistance. I - 12 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 23
. LED Display Red indicator is stays red for more than 30 seconds Problem The printer server has failed the Power On Self Test. Solution The OkiLAN 6020e will try to print a configuration sheet on the printer with more information. Failing the self test can be caused by any of the following: a) The - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 24
I - Hardware Installation LED Display The red and green indicators are alternately flashing for longer than two minutes. Problem The OkiLAN 6020e is in firmware download mode. This means it is waiting web site at http://www.okidata.com to download the utility. I - 14 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 25
Advanced Management Section II: Advanced Management Features - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 26
Connecting to the OkiLAN 6020e II-10 Configuration II-12 Status II-15 Print Job Log II-15 Support II-15 Reset II-16 OkiLAN 6020e Server Discovery II-16 Troubleshooting II-17 Chapter 5 Additional Management Features ......II-18 OkiNet Alert II-18 Enhanced Printer Status II-18 OkiNet for NDS - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 27
NetView Private MIB OkiLAN 6020e SNMP support has been enhanced with a private MIB. It is accessible via SNMP over TCP/IP and IPX. This private MIB contains over 150 configuration and status variables for the network protocols, printer ports, network interfaceprinter settings, and the overall OkiLAN - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 28
, the OkiLAN 6020e can send traps on toner low, paper jam, and printer cover open, depending on the printer's capabilities. The traps may be configured for specific destination addresses and can be configured for a particular printer port and/or printer trap. II - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 29
default). Extended Status can be enabled through the OkiLAN 6020e Configuration utility (telnet) from the Configure Port option. You can also enable OkiNet Alert through OkiNet and the OkiLAN 6020e Configuration utility (telnet) allow you to specify the community names and a trap destination - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 30
, click the NetWare Directory Services icon from the left column. Select NDS Tree Name from the pull-down menu and enter the Print Server Context. 6. Click the Queues icon from the left column to bring up the Queues screen and then click the Change button. II - 6 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 31
Support 7. Select the desired queues from the list of Available Queues to be added into service. Click the Service button to move the selection to the Serviced print server IP configuration. AppleTalk Configuration 1. From the main JetAdmin screen, select the OkiLAN 6020e port you wish to configure. - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 32
3. In the Specify the device address... field, enter the print server IP address, followed by a comma and then the output port number. For example, to install a printer for output port 2 of an OkiLAN 6020e with an IP address of 10.10.10.2, enter "10.10.10.2,2". II - 8 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 33
Printer Page 3 page, select a printer driver from the pull-down menu and click the Continue button. 7. On the Install Printer Page 4 page, enter a name for the printer in the Select Printer Name field and click the Install Printer button. 8. Users in the domain can now print to the new printer - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 34
Troubleshooting. Connecting to the OkiLAN 6020e 1. Enter http:// in the browser address prompt. The HTTP address can be the IP address, the System Name if the print server has been configured OkiLAN 6020e Product Discovery section for instruction. II - 10 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 35
for details. 2. A successful connection will display the print server home page. Advanced Management Note: By default, only Status and Support information can be viewed. To configure the print server, see the Configuration section. The print server pages are normally displayed in a frame with two - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 36
/IP for instructions on configuration. 4. Select the Submit Changes button at the bottom of the page to send the new values to the print server. WARNING: Changes will not be saved if the Submit Changes button is not selected before continuing to another page. II - 12 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 37
print server must be reset for the desired values to take effect. Reset the server immediately or wait until all configuration is complete before resetting. If you do not reset immediately, a link will appear at the top of all subsequent configuration pages reminding you to reset the server. OKI - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 38
FAQ page on the OKI Web Server. Maximum URL configured, it will appear under the Support menu. Will accommodate up to 24 characters. • Custom Link URL - This field is useful for setting up a link to an internal help desk. Can contain any URL up to 63 characters. II - 14 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 39
servers configuration sheet. Print Job Log The Print Job Log page provides information on print jobs, system up time and total jobs printed. Support There are up to four links listed under the Support menu. Contact This page provides the necessary addresses and phone numbers for contacting Oki Data - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 40
Reset Reset Reset the print server by selecting the Reset link under the Reset menu. A message will appear asking you to confirm the reset. Restore Select Restore Defaults under the Reset menu to restore selected protocols to factory 6020e print servers on the network can OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 41
values. Configuration • Web browsers will generally cache previously viewed Web pages on the local machine. To view the most current print server information, it is a good idea to select the Reload or Refresh button on your browser instead of using the Back button. OKI OkiLAN 6020e User's Guide II - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 42
Additional Management Features OkiNet Alert OKI OkiNet Alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems before they are encountered by users. This remote management utility can be configured to monitor all SNMP - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 43
manual. Printer Security for TCP/IP Printing The OkiLAN 6020e print server has a Printer Security for TCP/IP Printing feature which allows the printers to only be accessed from a specified list of IP addresses. This feature is accessed via TELNET option #9, TCP Connection Configuration. OKI OkiLAN - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 44
Section 2 - Chapter 5 - Additional Management Features II - 20 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 45
Section III: NetWare NetWare - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 46
Information III-17 Printing a Configuration Sheet III-17 Resetting the OkiLAN 6020e III-17 Restoring Factory Default Settings III-18 Creating Customized Views III-19 Modifying View Settings III-20 Permanently Defining SNMP Access Information III-22 III - 2 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 47
with an OkiLAN 6020e Print Server III-29 Configuring the OkiLAN 6020e Using OkiNet for NDS III-31 Adding or Removing the OKI Print Server Class III-31 Chapter 4 Using the OkiLAN 6020e in NDPS (NetWare 4.x and 5.1 III-33 Introduction III-33 Adding the Oki Printer Driver Using NDPS Broker III - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 48
environments in which to configure the OkiLAN 6020e: • Bindery (NetWare 3.x) • NetWare Directory Services (NDS)-for NetWare versions 4.1 and later • NDPS for NetWare 4.x and 5.x. Before You Start • You should be familiar with network administration as well as the physical setup and operation of your - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 49
print server screen, PSC, job notification. Without supervisor intervention, other printers cannot access data sent to the queues. Data can be password protected from the file server to the printer. Data can be password protected from the file server to the printer. OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 50
for all Supported Protocols • Display OkiLAN 6020e Diagnostic Information • Print a Configuration Sheet • Reset the OkiLAN 6020e • Restore Factory Default Settings • Create Customized Views • Modify View Settings • Permanently Define SNMP Access Information III - 6 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 51
following settings are configurable based on the capabilities of the OkiLAN 6020e: • NetWare • Output Port • NetWare Queues • SNMP • NetWare Port • VINES * • TCP/IP • EtherTalk • Protocols • SNMP Traps * May apply to other OkiLAN print server models. OKI OkiLAN 6020e User's Guide III - 7 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 52
in the Default File Server scroll menu. The default file server must be active at power up for the OkiLAN 6020e to recognize other servers. • Print Server Name - Enter the print server name of your choice. III - 8 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 53
for the OkiLAN 6020e from NWAdmin or PConsole, the OkiLAN 6020e must be reset via OkiNet for NetWare. NetWare Queues Configuration Options The NetWare Queues option allows you to add bindery print queues to be serviced by first selecting each desired queue and then selecting the →button. To have - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 54
2 - OkiNet for NetWare NetWare Queue Load Balancing Print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times and selecting a different output port for each queue entry. NetWare Port Configuration Options To modify the NetWare port settings to - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 55
Port Configuration Options To configure the printer. • OFF - Print data stream will be sent directly to the output port without alteration. • PCL - Inserts the appropriate character string in front of each print job to switch the printer to the PCL print language. OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 56
the appropriate printer language for printing configuration pages on your printer. Note: Do not set the Configuration Page Language to OFF for all ports of your OkiLAN 6020e. If a configuration sheet cannot be printed, troubleshooting abilities are limited. III - 12 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 57
printers that support PJL. Output Type Select the desired level of support for 1284 communications. The following settings are available: - Compatibility (no bidi) - 1284 (Std Nibble Mode) (default) - 1284 (ECP or Fast Nibble Mode) SNMP Configuration security. To configure SNMP specific information, select - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 58
any information useful to a user if problems with the OkiLAN 6020e arise. System Location the community name required to Get information from the print server. The default community name is public. Note cannot be configured without the correct Set community name. To secure the configuration of the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 59
is used by the OKI OkiNet Alert and other monitoring utilities for grouping or filtering OkiLAN 6020e devices. OkiNet Alert assists in managing network printers by immediately alerting you of printer problems. SNMP Traps Configuration The SNMP Trap option allows configuration of traps. Traps are - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 60
network, enter the network number OKI printer model supports the features: • On-line • Off-line • No Printer Attached • Paper Out • Toner Low • Paper Jam • Door Open • Printer Error Note: Toner Low, Paper Jam and Door Open require the printer to be set in PCL or Auto mode. Saving the Configuration - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 61
available for the following topics: • Printer • Print Server • Protocols • Network • Statistics • Technical Support • System Printing a Configuration Sheet The configuration sheet provides current network, print server and printer information. To print a configuration sheet, select the OkiLAN 6020e - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 62
EtherTalk Restores settings specific to the EtherTalk protocol configuration such as the name and zone. Once you have chosen the desired options, select Restore. To completely restore the print server to factory default settings, select all items in the list. III - 18 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 63
needed. OkiNet has two predefined views. The All Print Servers view displays all the print servers available on your local network. The Unconfigured Print Servers View displays only the print servers on the local network that have not been configured. Creating a New Customized View To create a new - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 64
those print servers matching specific criteria. The print server list Name NetWare print server name print server is Network # The IPX network network. All OkiLAN 6020e print servers that respond are placed in the list. If you have a large number of OkiLAN 6020e print servers on your network - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 65
Networks - This method adds specific print servers (or groups of print servers) to the list. This can be useful when only a subset of the list of OkiLAN 6020e products is desired. To select all desired print Remove from the Columns Available field. NetWare OKI OkiLAN 6020e User's Guide III - 21 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 66
the OkiNet for NetWare utility updates the main print server list. To define a refresh rate, network traffic. Permanently Defining SNMP Access Information Access to OkiLAN 6020e configuration Network Numbers This field displays the serial number of each OkiLAN 6020e or the network number for a network - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 67
an asterisk (*) as a wildcard to match multiple devices. As examples, to add a single OkiLAN 6020e, enter 1500001, or to add a whole network, enter D4-. Delete The Delete button deletes an OkiLAN 6020e access entry in the Serial/Network Number list. NetWare OKI OkiLAN 6020e User's Guide III - 23 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 68
users to create and manage OKI print server objects in the NDS tree OKI devices with the same utility used to manage other network objects such as printers and queues. The OkiLAN 6020e supports service, you can install OkiNet for NDS for each. OkiNet for NDS supports OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 69
NetWare 4.1 A single installation is required to service Windows 3.x and Windows 95/98 operating systems instructions on the screen. Tip for Advanced Administrators When installing OkiNet for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 70
Section I. Tip for Advanced Administrators When installing OkiNet for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's NWADMIN3X.INI file. III - 26 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 71
Section I. Tip for Advanced Administrators When installing OkiNet for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's registry. NetWare - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 72
from the schema. See Adding or Removing the OKI Print Server section for more information. 4. Click OK. 5. Define filter and sort criteria for displaying a list of Extended Systems devices from which to choose. 6. Click OK. The following screen will display: III - 28 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 73
OkiLAN 6020e Print Server To configure the NetWare environment for printing to an OkiLAN 6020e print server, follow these steps: 1. Install the OkiLAN 6020e hardware and connect the cabling. Instructions for hardware installation are found in Section I of this manual. 2. Create an OKI Print Server - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 74
and then select the same print queue object. This will allow multiple printers to service a single print queue. 10. From the Assignments page, select OK to save changes. If you have selected PServer mode, you have completed all necessary steps. Continue to Configuring the OkiLAN 6020e Using OkiNet - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 75
The following settings are configurable: • Identification • Assignments • Network Configuration • Network Protocols • Port Configuration • Status For specific information about these detail pages, select the HELP button. Adding or Removing the OKI Print Server Class The OKI print server class is - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 76
the class again. From the Tools menu in Novell's NetWare Administrator, choose Define OKI Printing Device Class. If this option is grayed, the class has already been added. for NDS. The OKI print server class will now appear in the Create New Object dialog. III - 32 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 77
from multiple floppy disks. If a printer driver is shipped on more than one disk, copy the files to a directory on a hard drive or network drive and install the driver from there. Any problems in adding the driver should be addressed to the OKI Customer Service Center. 1. In NetWare Administrator - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 78
The .INF file and path is selected in the Resource location box. The printer drivers are in the Resources To Be Added box. 9. Click OK on the window. 11. Note: When the Manage Resources window re-appears, the printer driver(s) have been added to the NDPS Broker. 12. Click Cancel on the NDPS Broker - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 79
"Loading Printer Agent" screen stays on for more than 60 seconds, click "Stop Waiting." 11. Ignore the error message, "The Printer Agent Just Created Needs Attention." 12. Choose the printer drivers and click Continue. 13. The Status should show Idle. NetWare OKI OkiLAN 6020e User's Guide III - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 80
Printer Name. Click Finish. 9. If the "Loading Printer Agent" screen stays on for more than a minute, click "Stop Waiting." 10. Ignore the error message, "The Printer Agent Just Created Needs Attention." 11. Choose the printer drivers and click Continue. III - 36 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 81
6020e Configuration Sheet, get the print server's IP address. Click at IP Host, then enter IP address of print server. 11. The LPR Printer Name is the output port of the print server. 12. Click Accept and Exit, then use Escape key to save. NetWare OKI OkiLAN 6020e User's Guide III - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 82
Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS III - 38 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 83
Section IV: TCP/IP TCP/IP - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 84
to the OkiLAN 6020e IV-13 Chapter 3 TCP/IP Configuration and Printing ... IV-14 Overview IV-14 Configuring for TCP/IP Network Printing IV-15 Remote Print Queue Name IV-15 Configuring a BSD-Style Print Queue IV-17 Remote LPD Printing IV-18 FTP Printing IV-19 Timeout Checking IV-21 Raw Port - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 85
Session IV-43 Appendix A Troubleshooting IV-49 Main Status Indicator IV-49 Restoring the OkiLAN 6020e to Factory Defaults IV-49 Unable to Assign IP Address IV-50 Hardware Error Messages IV-53 Printing a Configuration Page IV-54 Unable to Print IV-54 Appendix B Application Considerations - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 86
AIX ver. 3.x for Printing with the OkiLAN 6020e IV-75 Configuring Solaris 2.x for Printing with the OkiLAN 6020e IV-77 Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6020e IV-79 Appendix C Internet Printing Protocol (IPP) ..... IV-81 IV - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 87
and information on how to configure your OkiLAN 6020e. You will also be instructed on how to set up your host computers to print to the OkiLAN 6020e using the TCP/IP protocol. OkiLAN 6020e supports TCP/IP methods for printing: • Remote Line Printer Daemon (LPD) • File Transfer Protocol (FTP - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 88
6020e unit.) • Install OkiNet for TCP/IP-see Section I. Overview of TCP/IP Configuration • Assign an IP address for the OkiLAN 6020e • Configure the OkiLAN 6020e network information • Configure hosts for printing to the OkiLAN 6020e • Test print (optional) IV - 6 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 89
your network uses a name service, add the host name and IP address to the name server. Most TCP/IP networks use the Network Information Service (NIS), Domain Name Service (DNS) or the "/ etc/hosts" database. See your network documentation for instructions. TCP/IP OKI OkiLAN 6020e User's Guide IV - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 90
NetWare client. See Section III of this manual for specific information. • OkiNet for network routers are configured to pass these requests. The OkiNet and OkiNet for VINES utilities (may apply to other OkiLAN print server models) do not have this restriction. IV - 8 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 91
Configuring the OkiLAN 6020e Gleaning If an IP address has not been permanently assigned when the OkiLAN 6020e is powered on or reset, it will look for a ping packet on the network in effect until the OkiLAN 6020e is powered off or reset. Therefore, a permanent IP address should be assigned by - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 92
the Bootstrap Protocol (BOOTP), adding the capability of automatic allocation of reusable network addresses and additional configuration options. DHCP uses the same packet structure as BOOTP so current BOOTP the address and start looking for a new address. IV - 10 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 93
Configuring the OkiLAN 6020e Static Route Entry When the OkiLAN 6020e is powered on or reset only be used temporarily to configure a new, permanent IP address into the workstation's network routing table. To use configuration file that maps the Ethernet hardware addresses of devices on the network - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 94
supports, request the manual page for the protocol's daemon (e.g. man bootpd or man rarpd), or see your network manuals. Both protocols require that you add the product's network hardware address and IP address to a configuration file. See your network documentation for instructions reset print print - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 95
the print configuration sheet button, through the OkiNet or OkiNet for VINES utilities (may apply to other OkiLAN print server models) or via telnet. • If the settings appear to be correct, try repeating the installation steps. If problems persist, call Oki Data Customer Support at 1-800-OKI-DATA - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 96
the instructions outlined below. You should also refer to your operating system or computer manual for information about configuring remote network printing. If you are still unable to configure your computer system to print to the OkiLAN 6020e, contact Oki Data Customer Support at 1-800-OKI-DATA - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 97
printers and print data. Typically you will select the printer type for your printer in telnet under the Configure Port option. However, if you are connecting to an ASCII printer, you may wish to use the OkiLAN 6020e to format the print data for your printer. TCP/IP OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 98
Configuration and Printing The OkiLAN 6020e will parse the remote queue name and search for certain characters at the end which tell how to convert an ASCII print job. The print the printer to print any partial page at the end of the job. LF Use the LF suffix at the end of the Remote Print Queue - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 99
Section 4 - Chapter 3 - TCP/IP Configuration and Printing Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN 6020e as a remote printer in the "/etc/printcap" database to each host printing to the OkiLAN 6020e. You can add PRINTCAP options as needed. If you are - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 100
to submit print jobs. PC-based TCP/ IP packages often provide a command line lpr program and a utility to redirect the output of an LPT port to a Remote LPD system. Consult your system administrator or software vendor for assistance troubleshooting LPD. IV - 18 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 101
Note: The Remote LPD implementation of the OkiLAN 6020e does not support any UNIX LPD input or output filters or the direct printing of banner pages. It is possible to configure some UNIX systems so that banner pages and input and output filters will be generated at the UNIX host and then sent - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 102
Configuration and Printing TYPE ASCII BINARY IMAGE STRU MODE OPEN CLOSE QUIT BYE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported. mode. This may cause unexpected or undesired printing results. IV - 20 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 103
Configuration and Printing Example: The following example prints a PostScript file called chart.ps to the OkiLAN 6020e printer remote: MPX1 200 PORT command successful. 150 Opening BINARY mode data connection for MPX1. 226 Transfer complete. 4549 bytes sent in OKI OkiLAN 6020e User's Guide IV - 21 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 104
port connection to send data to the OkiLAN 6020e. A TCP/ IP port has been assigned to the output port of the OkiLAN 6020e as follows: TCP/IP Port: 9100 Output Port: 1 Consult your system documentation for information on how to submit print jobs to a raw port. IV - 22 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 105
IP address • Configure an OkiLAN 6020e for all Supported Protocols • Display OkiLAN 6020e Diagnostic Information • Print a Configuration Sheet • Reset the OkiLAN 6020e • Restore Factory Default Settings • and setting up a host name, see the README file. TCP/IP OKI OkiLAN 6020e User's Guide IV - 23 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 106
by choosing the applicable file folder tabs. The following settings are configurable: • TCP/IP • NetWare • NetWare Port • NetWare Queues • VINES* • EtherTalk • Output Port • SNMP • Protocols • SNMP Traps * May apply to other OkiLAN print server models. IV - 24 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 107
TCP/IP Configuring TCP/IP Options To configure options specific make the IP address permanent. If the OkiLAN 6020e has been configured to remember its IP address, it does not need to not be able to access the OkiLAN 6020e. • Use Network Protocol - Select this option to use RARP, BOOTP or DHCP to - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 108
or the default gateway becomes unavailable, the OkiLAN 6020e may not be able to communicate with non-local networks. WINS Server If you are using WINS name resolution, set the address of the WINS Server where the address of the WINS Server from the DHCP Server. IV - 26 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 109
Port button and then select the desired port. NetWare Queue Load Balancing Print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times and selecting a different output port for each queue entry. TCP/IP OKI OkiLAN 6020e User's Guide IV - 27 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 110
on the bottom right of the screen. Output Port Configuration Options To configure the OkiLAN 6020e output port, select the Output Port print job. The Printer Type selection is used to determine the actual characters required to switch your printer's language. IV - 28 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 111
the PCL print language. PostScript Switch Sequence Enter the character string to switch the printer to the PostScripti print language. Configuration Page Language Select the appropriate printer language for printing configuration pages on your printer. TCP/IP OKI OkiLAN 6020e User's Guide IV - 29 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 112
baud rate. Bidirectional Printer Status Support Enable this option for enhanced status from the bidirectional printer. SNMP Configuration Options SNMP options specify following screen will display: Note: SNMP options need to be configured only if you are managing an OkiLAN 6020e or getting system - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 113
be configured without the correct Set community name. To secure the configuration of network monitoring utilities for grouping or filtering OkiLAN 6020e devices. OkiNet Alert assists in managing network printers by immediately alerting you of printer problems. TCP/IP OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 114
longer communicate using that protocol. SNMP Trap Configuration The SNMP Trap option allows configuration of traps. Traps are unsolicited information concerning the local segment. To configure SNMP traps, select the SNMP Traps tab. Note: SNMP options need to be configured only if you are managing - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 115
network, enter the network number Printer Attached • Paper Out • Paper Jam • Door Open • Toner Low • Printer Error The toner low, door open and paper jam traps require that your printer be set to automatic emulation switching (the default) or PCL emulation. TCP/IP OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 116
available on the following topics: • Printer • Print Server • Protocols • Network • Statistics • Technical Support • System Printing a Configuration Sheet The configuration sheet provides current network, print server and printer information. To print a configuration sheet, select the OkiLAN 6020e - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 117
server to factory default settings, select all items in the list. CAUTION: Make sure there are no active print jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6020e while a job is printing, the job may not print successfully. TCP/IP OKI OkiLAN 6020e User's Guide IV - 35 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 118
All Print Servers view displays all the print servers available on your local network. The Unconfigured Print Servers view displays only the print servers on the local network that have not been configured. Creating displayed as described by the view selected. IV - 36 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 119
screen. Display Filter The filter option displays only those print servers matching specific criteria. The print server list can be filtered by any of the for groups / subnets Name SNMP System Name (sys name) for the print server Product # Select from the list of product number(s) Product Type - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 120
6020e products on the network. • Search Local Network - This method broadcasts a discovery request to locate all OkiLAN 6020e print servers on the local network. All OkiLAN 6020e print servers that respond are placed the right of the last column on the screen. IV - 38 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 121
often the OkiNet for TCP/ IP utility updates the main print server list. To define a refresh rate, select Automatic minutes and minimize network traffic. Permanently Defining SNMP Access Information Access to OkiLAN 6020e configuration and diagnostic information OKI OkiLAN 6020e User's Guide IV - 39 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 122
IP To configure OkiNet for group of OkiLAN 6020e print servers selected. Add Select the Add button to define new OkiLAN 6020e or a group of OkiLAN 6020e print servers. The IP address must follow the format 24. To add a group of OkiLAN 6020e print servers, enter 198.168.42.*. Delete The Delete button deletes an OkiLAN - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 123
Section 4 - Chapter 4 - OkiNet for TCP/IP Configuring the Discovery UDP Port Number In order to discover OkiLAN 6020e print servers on the network, OkiNet for TCP/IP communicates with the OkiLAN 6020e print servers on a UDP port number. Normally, using this port number should not interfere with - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 124
If the DHCP protocol is enabled as a default, the print server may be accessed through an ordinary Internet Web browser, such as Netscape Navigator or Microsoft Internet Explorer. See Section II, Chapter 4, OkiLAN 6020e Web Configuration, for more information. IV - 42 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 125
Configuration Chapter 6 Telnet Configuration Overview The OkiLAN 6020e Configuration utility (telnet) provides system, network and printer status information and allows you to change the configuration of your OkiLAN 6020e. Note: The configuration . TCP/IP OKI OkiLAN 6020e User's Guide IV - 43 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 126
Network/Printer Information 2. Change Password 3. Specify Print Server IP Address 4. Specify Subnet Mask For Your Network 5. Identify Default Gateway IP Address 6. Configure Port 7. TCP Connection Configuration 8. Download New Firmware 9. Restore to Factory . IV - 44 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 127
Configuration Specify Print Server IP Address (Option 3) This option allows you to select the method the OkiLAN 6020e uses to obtain its IP address or to set a permanent IP address. If the OkiLAN 6020e has been configured is reset or is power cycled. TCP/IP OKI OkiLAN 6020e User's Guide IV - 45 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 128
OkiLAN 6020e configuration pages should be printed: Text (default), PCL, PostScript, or OFF. Configure Language Switching This option asks you to select the language of your printer. For a description of language switching options, see pages IV-28 and IV-29. IV - 46 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 129
Type This option enables you to indicate the printer type to which the OkiLAN 6020e is connected. Printer choices are: 1. Oki Data printer. 2. Custom printer. • Language Switching Sequence - If you select Custom Printer from the Configure Printer Type screen, you must indicate the switching sequence - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 130
that no print jobs are active when you select Restore to Factory Defaults. Performing this operation will restore parameters for the TCP/IP protocol to factory defaults. If you reset the OkiLAN 6020e while a job is printing, the job may not print successfully. IV - 48 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 131
error, use the following method which does not require a network connection. To restore the OkiLAN 6020e to factory defaults, complete the following steps: 1. Power down the OkiLAN 6020e. 2. While holding in the Print Configuration Sheet Test button, power up the OkiLAN 6020e. Hold the button until - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 132
Troubleshooting Unable to Assign IP Address Gleaning If you ping the device and are not getting a response, the glean is not working. Check the following possible problems turn solid green and the device will print a configuration page. Power cycle the device and try the OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 133
4 - Appendix A - Troubleshooting UNIX BOOTP If you are tells it to reread "/etc/bootptab". Most BOOTP servers support this option. Check your local BOOTP documentation. If this does not work, restart the internal bootptab tables. TCP/IP OKI OkiLAN 6020e User's Guide IV - 51 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 134
Section 4 - Appendix A - Troubleshooting Static Route Entry If the OkiLAN 6020e has printed a configuration page showing the default address, but it cannot be reached through telnet, check the following: • Display the host's routing tables with the 'netstat r' command. Verify the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 135
continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282). System CRC Failed The OkiLAN 6020e has failed. • Power cycle the OkiLAN 6020e once. If the error continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282). TCP/IP OKI OkiLAN 6020e User's Guide IV - 53 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 136
IP address, the IP address will be listed as Using network protocol (0.0.0.0) on the configuration page. Unable to Print LPR/LP • If the indicator blinks green, the OkiLAN 6020e is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 137
functioning on the network. • If you cannot connect over ftp but the ping succeeds, try telneting to the OkiLAN 6020e and print a configuration page to verify settings. If that fails, you might have a TCP/IP configuration problem with the OkiLAN 6020e. TCP/IP OKI OkiLAN 6020e User's Guide IV - 55 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 138
HP-UX v9.xx for Printing • Configuring HP-UX v10.xx for Printing • Configuring SCO UNIX for Printing • Configuring IBM's AIX ver. 3.x for Printing • Configuring the OkiLAN 6020e for Solaris Printing • Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing IV - 56 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 139
network devices will have both an IP address and a 48 bit Ethernet/Token-Ring (network hardware) address. Ethernet addresses usually cannot be configured IP address, the OkiLAN 6020e configuration utility (which is run by accessing OkiLAN 6020e. Address Formats Network hardware addresses are 48-bits - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 140
a network. each entry maps a network hardware address to network hardware address. For BOOTP, the network network hardware address.) 2. The OkiLAN 6020e sends out a BOOTP request packet with its network hardware address. For this example, the network network hardware address. It looks up the network - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 141
running on the BOOTP server. To test whether a BOOTP daemon is running on at the UNIX prompt to consult a manual page on the ps command for a manual page on the BOOTP daemon and how to start it. Limitations Often TCP/IP networks Your router(s) are configured to forward BOOTP packets between the OkiLAN - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 142
IP network device must have a unique 32-bit IP address. TCP/IP network devices will have both an IP address and a 48-bit Ethernet (network hardware) address. Ethernet addresses usually cannot be configured and has a range from 0 to 255. Example: 192:168:42:55 IV - 60 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 143
network hardware address. The RARP server (which is usually a UNIX workstation running a rarpd daemon) performs this function using two configuration files and one or more daemons. The configuration a network hardware network hardware address. 2. It sends out a RARP request message with its network - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 144
on the RARP server. On most UNIX systems, this can be tested by using the ps command with the show all processes option. Unfortunately UNIX prompt to consult a manual page on the RARP daemon and how to start it. Limitations Often TCP/IP networks are divided into subnets. OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 145
already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails! 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6020e are in the "/etc/hosts" file on the HP-UX system. TCP/IP OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 146
entry is in the "/etc/services" file printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c Procedure HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing. To configure printing using SAM, do the following - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 147
of the OkiLAN 6020e on the network. The name must also be in the "/etc/hosts" file. c) Remote printer name - yourqueuename This is the name of the queue on the OkiLAN 6020e and must end with 1, 2, 3, or 4, depending on the port selected to service the print jobs. d) Remote cancel model - rcmodel - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 148
you just created using SAM. Peripheral Devices -> Printers and Plotters -> Enable a Printer ... 7. Printer name: - lj4 8. Start the LP request scheduler by typing: /usr/lib/lpsched 9. Run a test print job to the OkiLAN 6020e with the following command: lp -d lj4 filename Configuring HP-UX v9.xx for - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 149
the time steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 the "/etc/services" file: printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c TCP/IP OKI OkiLAN 6020e User's Guide IV - 67 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 150
service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. f) Printer class - (optional) g) Make this the system default printer. Leave the box unchecked. IV - 68 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 151
menu and select Exit. 7. Select the Exit SAM button. 8. Test printing to the OkiLAN 6020e with the following command: lp -d lj4 filename Configuring HP-UX v10.xx for Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on the HP-UX ver. 10.xx of the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 152
already configured since the HP-UX system is on a TCP/IP network. Do service the pending print request. This is helpful if the daemon died or was terminated for some reason. For more information on inetd or "/etc/inetd.conf", type man inetd or man inetd.conf. IV - 70 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 153
The name of the printer as referenced by the local HP machine. Print jobs sent to this printer are passed to the OkiLAN 6020e. b) Remote system name - OKIPRINTER The name of the OkiLAN 6020e on the network. The name must also be in the /etc/hosts file. TCP/IP OKI OkiLAN 6020e User's Guide IV - 71 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 154
service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. f) Printer class - (optional) g) Make this the system default printer Test printing to the OkiLAN 6020e with the following command: lp -d - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 155
OkiLAN 6020e and must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages IV-15 and IV-16 for more information on remote queue names. Prerequisites Before - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 156
remove remote line printing. Choose Install even if remote line printing may already be installed. 3. If remote line printing is already installed, to change the remote printer description file. Do NOT run "/etc/rlpconf". We will be performing the functions of "/etc/rlpconf" manually. 5. The next - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 157
describes the configuration of the printing system on IBM's AIX version 3.x of the UNIX operating system. The following specific names will be used to represent general devices or concepts. • lj4 - The local queue name on the AIX system to which print jobs that are destined for a printer attached to - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 158
Print Jobs and Printers) Manage Remote Printer Subsystem Client Services Remote Printer Queues Add a Remote Queue A form appears asking you to define a remote print SMIT: Spooler (Print Jobs and Printers) Manage Remote Printer Subsystem Server Services lpd Remote Printer Subsystem Start Using the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 159
with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages IV-15 and IV-16 for more information on remote queue names. TCP/IP OKI OkiLAN 6020e User's Guide IV - 77 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 160
on the Solaris system. Procedure To configure the Solaris machine so users can spool print jobs to the pcl print queue on the OkiLAN 6020e named Type: accept lj4. 5. Type: enable lj4. 6. Try printing by issuing the following command: lp -d lj4 filename IV - 78 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 161
OkiLAN 6020e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages IV-15 and IV-16 for more information on remote queue names. Prerequisites Before - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 162
/dev/printer/var/spool/lpd.lock /usr/lib/lpd; echo -n ' printer' fi Procedure To configure the Sun-OS or Ultrix machine so that users can spool print jobs to the pcl print queue on /lj4.log. 5. Try printing by issuing the following command: lpr -Plj4 filename IV - 80 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 163
you can print to any printer that is connected both to your OkiLAN 6020e and to the Internet. With the OkiLAN 6020e, there is no configuration required. Enter the print server IPP generic version of a UNIX® CUPS® driver that supports the IPP protocol. TCP/IP OKI OkiLAN 6020e User's Guide IV - 81 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 164
Section 4 - Appendix C - Internet Printing Protocol (IPP) IV - 82 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 165
Section V: LAN Manager/LAN Server LAN Manager/ Server - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 166
Port P1 V-14 Restoring Factory Defaults V-15 Printing a Configuration Sheet V-15 Chapter 5 Using HELP V-16 Overview V-16 General Help V-16 Context-Sensitive Help V-16 Appendix A Troubleshooting V-17 No Configuration Sheet V-17 Unable to Print V-17 V - 2 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 167
Nodes A printer connected to the network can be accessed from DOS and other network nodes properly configured as LAN Manager/LAN Server client nodes. You should be familiar with the OS/2 Print Management utilities. See your OS/2 manuals for more information. LAN Manager/ Server OKI OkiLAN 6020e - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 168
stack must be loaded and running on the file server from which the OKI Network Printer Redirector will run. With LAN Manager, this means you must enable the information. Routers The 802.2 Type I network protocol used by the OKI Network Printer Redirector cannot be routed by routers which operate - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 169
new local printer port. Once the installation is complete, you can verify communication by printing a configuration sheet. Network Preparation • You must have network administrator privileges to install the OkiLAN 6020e. • You must have physical access to an OS/2 file server to host the OKI software - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 170
the configuration of the OkiLAN 6020e or to view port information. Note: The directory where OKI DLL files install, c:\OS2\DLL, must be the first entry in the LIBPATH command located in the CONFIG.SYS file. When you reboot the system, the OS/2 spooler will load the OKI Network Printer Redirector - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 171
recommended action. 7. Select Exit. Completing the Installation After the OKI software has been installed, you must do the following: 1. Verify Before you can print via the OkiLAN 6020e, you must first add a local printer port to your OS/2 server. 1. Select the Network Printing Tools folder on the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 172
, or P4. Use the arrow buttons to scroll through the available print servers on the network. 5. Enter a local port name. Highlight the entry field labeled printer port. 7. Repeat these steps for all print server ports you are configuring. 8. Exit OkiNet for OS/2. V - 8 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 173
port created by OkiNet for OS/2, you must create an OS/2 printer. OS/2 1.3 1. Open the Print Manager from the desktop. 2. Select SETUP from the menu. 3. Select Printers. This will display a list of printers currently configured on this server. 4. Select Add. A dialog box will display, defining the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 174
you will have to reconfigure the OkiLAN 6020e to print the configuration sheet in PostScript. The configuration sheet will print to all connected printers. A configuration sheet will print automatically if the OkiLAN 6020e fails due to a network protocol error. V - 10 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 175
printer attached to the OkiLAN 6020e as the OS/2 default printer, do the following: 1. From the desktop, right-click on any printer icon. 2. Select the right arrow next to Set Default. A list of print queues defined for your system will display. LAN Manager/ Server OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 176
\\Server1\MPXLPT If OS/2 does not recognize the network name, enter the following command from an OS/2 prompt on the server where the software utilities were installed: C>NET SHARE MPXLPT /PRINT Any applications using LPT1 will now print to the OkiLAN 6020e. V - 12 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 177
port. To add additional local ports, follow the Running OkiNet for OS/2 instructions on page VI-8. Configuring a Print Server OkiNet for OS/2 allows you to change the default configuration of the OkiLAN 6020e. These configuration settings are retained when the OkiLAN 6020e is powered off. 1. Login - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 178
option for parallel Port P1 and P2: • Configuration page print language - The factory default is TEXT. If your OkiLAN 6020e is attached to a PostScript or PCL printer, enable the appropriate selection. The OkiLAN 6020e configuration sheet will be printed in the language you select. This setting only - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 179
connected printer is a PostScript-only printer, you must configure the OkiLAN 6020e to print the configuration sheet in PostScript. The configuration sheet will print automatically if the OkiLAN 6020e fails due to a network protocol error. LAN Manager/ Server OKI OkiLAN 6020e User's Guide V - 15 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 180
form information on using online help. Context-Sensitive Help Context-sensitive help is available from many areas of OkiNet for OS/2. Several of the configuration windows have help buttons which, when selected, provide information about that specific window. V - 16 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 181
can be printed. See you printer manuals for more information. Unable to Print If the OkiLAN 6020e passes self-test, but you are unable to send data to the printer via the OkiLAN 6020e, you may want to check the following: • Printer configuration • Printer hardware • Computer network adapter cards - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 182
- Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 183
EtherTalk Section VI: EtherTalk Support for Apple® MacIntosh® - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 184
OkiLAN 6020e Utility VI-4 Finding the OkiLAN 6020e VI-4 Renaming the OkiLAN 6020e Printer .......... VI-5 Selecting a Zone VI-5 Print Configuration VI-6 Status VI-6 Advanced Configuration Options VI-6 Appendix A Troubleshooting VI-8 Before You Call VI-8 OkiLAN 6020e Does Not Appear in the - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 185
the Printer from the Macintosh Chooser • Print Configuration and Status Information • Advanced Configuration System Requirements Please note the following system requirements: • PostScript Level 2 must be available on your printer • The network must be a Phase 2 EtherTalk network • Your printer must - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 186
AppleTalk Name • Move the OkiLAN 6020e from the Default Zone to a Preferred Zone • Print Configuration Page and view Status Information • Use Advanced Configuration Options Running the OkiLAN 6020e Utility 1. Turn on your printer and check that it is on-line. Verify the parallel cables are directly - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 187
a Zone 1. Choose the OkiLAN 6020e printer you wish to rezone. 2. Select Zone from the Configure pull-down menu. 3. Choose the zone in which you want the printer to appear. Note: If no Phase 2 router was found, this option will be unavailable. 4. Click OK. OKI OkiLAN 6020e User's Guide VI - 5 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 188
. This option should not be changed unless the user wishes to use a print spooler without bypass or the user does not want the printer to respond to any of the LaserWriter drivers. • Type 2 (optional) - Select this option when configuring for a spooler. VI - 6 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 189
will still be active on the network. To disable the EtherTalk protocol, use a utility from one of the other protocols. Reset Board This option will reset the print server. Restore Defaults This option will automatically return the EtherTalk interface to its factory defaults. All ports will be - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 190
allows you to troubleshoot problems you may have installing or using the EtherTalk protocol. After trying these suggestions, if you are still having difficulty, call Oki Data Customer Support at 1-800OKI-DATA (1-800-654-3282). If you have trouble sending data to the printer through your OkiLAN - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 191
System and Finder version 6.02 or later and LaserWriter driver version 8.0 or later. • Verify the printer supports PostScript Level 2 via the printer test/ configuration sheet. • If the status message Printer Error: Bi-Di communication on printer's parallel port is not enabled appears, verify your - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 192
Section 6 - Appendix A - Troubleshooting If the directory does not print, send the directory again, and watch the OkiLAN 6020e activity indicator. If the status indicator flashes to indicate activity, data is reaching the OkiLAN 6020e. Send the document again and watch the printer for activity. If - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 193
selection window and search again. Recommended Action: The device did not respond. If a reset has just taken place, the OkiLAN 6020e may not be registered on the network yet. Verify the OkiLAN 6020e is powered on. Search the network again to find the device. OKI OkiLAN 6020e User's Guide VI - 11 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 194
Troubleshooting Message: No OkiLAN 6020e device(s) found. Verify the OkiLAN 6020e is powered on. Recommended Action: Confirm the device is powered on and the LED is green. Verify correct zone to search by printing a configuration network connection. Try again. VI - 12 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 195
zone. 1. Click on the zone in the AppleTalk Zones box where your printer is located. (You may also need to scroll through the zones to locate the one you want.) If you do not know the zone in which your printer is located, contact your network administrator. OKI OkiLAN 6020e User's Guide VI - 13 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 196
Print a directory from your Macintosh by selecting Print Directory, Print Window or Print Desktop from the File pull-down menu. If your printer prints a directory, you have connected your printer to your network Type 2 to LaserWriter 2. Capture with print spooler. 3. Use the OkiLAN 6020e utility - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 197
Releasing 1. Use the OkiLAN 6020e utility to: a) Change Type 1 to LaserWriter b) Change Type 2 to LaserShared 2. Release the OkiLAN 6020e from the print spooler application. 3. Use the OkiLAN 6020e utility to remove Type 2. The two device types should be: • Type 1 : LaserWriter • Type 2 : (none - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 198
Section 6 - Appendix C - Capturing with a Spooler VI - 16 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 199
Windows Printing Section VII: Windows Printing - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 200
Print Monitor VII-7 Chapter 2 OkiLAN 6020e Set Up for Windows 95/98 VII-10 Overview VII-10 OkiLAN 6020e Connect for TCP/IP ........ VII-10 OkiLAN 6020e Connect for DLC VII-12 Output Port Configuration Options .......... VII-14 Enabling/Disabling VII-14 VII - 2 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 201
in a reduction of network traffic. System Requirements To use OkiLAN 6020e Connect for TCP/IP for your Windows NT 4.0/2000 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6020e print server must also be configured to run TCP/IP. OKI OkiLAN 6020e User's Guide VII - 3 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 202
, Settings and then Printers. 3. Select the Windows printer from which you would like to print with the OkiLAN 6020e Connect, then select Properties from the menu. 4. Add an OkiLAN 6020e Connect port. This may be done by selecting Add Port under the Ports tab. VII - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 203
be re-discovered if the IP address changes. 7. Click OK. You will now be able to use OkiLAN 6020e Connect for TCP/IP. Whenever you print to the printer configured with OkiLAN 6020e Connect, your print job will go directly to the OkiLAN 6020e print server port. OKI OkiLAN 6020e User's Guide VII - 5 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 204
/utilities/) or contact Technical Support. Configure Port If you have printing problems while using the OkiLAN 6020e Connect printing port, you may check the status of the port by selecting Configure Port under the Ports tab in the Properties screen. Notify On Printer Error This feature will check - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 205
Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT Notify When Printed This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description An optional field where you may list the location or other useful information - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 206
Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT Install LPR Print Monitor 1. Open the Windows NT Control Panel. 2. Select the Services tab. 3. Select Add, then Microsoft TCP/IP printing. 4. Click the Close button. 5. Restart the system. Assign Print Server IP Address 1. Using OkiNet for IP - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 207
added is selected and then click Next. Windows Printing 9. Select a printer driver and click Next. 10. Enter a name for the printer and click Next. 11. To share the printers with others on the network, select Shared and enter a share name for the printer. OKI OkiLAN 6020e User's Guide VII - 9 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 208
6020e print server must also be configured to run TCP/IP. Installation To install OkiLAN 6020e Connect for TCP/IP: 1. Install the OkiLAN 6020e Connect for TCP/IP-see Section I. 2. When installation is complete, click on Start, Settings and then Printers. VII - 10 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 209
Section 7 - Chapter 2 - OkiLAN 6020e Setup for Windows 95/98 3. Select the Windows printer from which you would like to print with OkiLAN 6020e Connect, then select Properties from the File menu. 4. Add an OkiLAN 6020e Connect port. This may be done by selecting Add Port - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 210
6020e Setup for Windows 95/98 8. Click OK. You will now be able to use OkiLAN 6020e Connect for TCP/IP. Whenever you print to the printer configured with OkiLAN 6020e Connect, your print job will go directly to the OkiLAN 6020e print server port. Port Settings If you have printing problems while - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 211
have printing problems while using the OkiLAN 6020e Connect printing port, you may check the status of the port. Select the Details tab on the Properties screen and then click the Port Settings button. For more configuration options, click the Configure button. OKI OkiLAN 6020e User's Guide VII - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 212
6020e Setup for Windows 95/98 Output Port Configuration Options To configure the OkiLAN 6020e output port, select the Output Port tab. Port Number Select the port number you wish to configure. Configuration Page Language Select the appropriate printer language for printing and configuration pages on - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 213
Section VIII: OkiView 32 OkiView 32 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 214
1 Introduction VIII-3 OkiView 32 Installation Requirements ......VIII-3 Chapter 2 OkiView 32 Printer Panel VIII-4 OkiView 32 Printer Properties Menu .......... VIII-4 Changing the Printer's Name and Location VIII-6 OkiView 32 Discovery Preferences VIII-6 VIII - 2 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 215
of all brands of network printers on Microsoft/Novell networks, as well as configuring and maintaining Oki network printers on those networks. The main screen contains the OkiView Printer List of network printers, and provides the starting point to select and manage print devices from Windows 95 - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 216
menu, click Printer Properties, or click the Printer Properties icon, or double-click on the selected printer. Note: Modification of printer options (print quality, page setup, paper source, etc.) is not available for Internet FAX and non-Oki printers. VIII - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 217
its online/offline status and the status text displayed on the printer's front panel. Network Property Page The Network Property Page is reached from the Printer Properties menu. This screen allows you to configure the network protocol, network frames, and SNMP traps events and destination addresses - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 218
one or more subnets to discover a network printer. • IPX/SPX Segmentsallows you to search one or more NetWare segments to discover a network printer. • Printer Refresh Polling Intervalsets the rate at which OkiView 32 polls the network for new print jobs. VIII - 6 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 219
Section IX: Regulatory Information Regulatory Information - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 220
according to the manufacturer's instructions, this equipment may equipment on, the equipment is probably the source of your problem. • Connect the equipment and the receiver to different an experienced radio/TV technician for additional advice. OKI is not responsible for radio/TV interference caused - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 221
Stack, VI-4 Client Nodes, VI-3 Configuration Sheet printing EtherTalk, VII-6 NetWare, III-17 TCP/IP, IV-34 troubleshooting in TCP/IP, IV-54 Configuration Sheet Printing, LAN Manager/LAN Serv, VI10 Configuring for TCP/IP Network Printing, IV-15 Creating an OS/2 Printer LAN Manager/LAN Server, VI - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 222
printing a configuration sheet, VII-6 renaming the OkiLAN 6020e printer, VII-5 reset Printing ASCII, IV-20 BINARY, IV-20 BYE, IV-20 CLOSE, IV-20 IMAGE, IV-20 MODE, IV-20 MPUT, IV-19 OPEN, IV-20 PUT, IV-19 QUIT, IV-20 SEND, IV-19 STRU, IV-20 TYPE, IV-20 FTP Troubleshooting OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 223
6020e print server, III-29 to III-30 OkiNet for NetWare configuration options, III-7 customized views, creating, III-19 enabling/disabling protocols, III-17 NetWare queues configuration options, III-9 output port configuration options, III-11 to III-13 Index OKI OkiLAN 6020e User's Guide Index - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 224
, 2 Remote LPD Printing, IV-18 to IV-19 Remote Print Queue Name, FF/LF/NF, IV-16 Resetting the OkiLAN 6020e in NetWare, III-17 Restoring Factory Default Settings in NetWare, III-18 in TCP/IP, IV-35 Routers, VI-4 RPrinter Mode in NetWare, III-5, III-8 Index - 4 OKI OkiLAN 6020e User's Guide - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 225
, IV-78 procedure, IV-78 Static Route Entry assigning an IP address, IV-11 troubleshooting, IV-52 Sun-OS v4.1.x Application prerequisites, IV-79 to IV-80 procedure, IV-80 T TCP/IP configuration overview, IV-5 network printing, configuring for, IV-15 OkiLAN 6020e connect for TCP/IP, VIII-4 to VIII - Oki MICROLINE 490 | OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 226
II-10 to II-11 OkiLAN 6020e server discovery, II-16 reset, II-16 status information, II-15 support menu, II-15 Web Configuration for TCP/IP, IV-42 Web JetAdmin Support, II-8 to II-9 configuring the OkiLAN 6020e, II-8 installing a Windows NT printer, II-8 to II-9 obtaining diagnostic information, II
OkiLAN 6020e
®
Pocket Print Server
User’s Guide
High Performance 10/100 Base-T Ethernet
Network Print Server