Oki ML420n OkiLAN 6120e & 6120i Product Update

OkiLAN

fi

6120e & 6120i

1: English

Product Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Mise ° jour sur le produit . . . . . . . . . . . . . . . . . . . . . . . .

2

Actualizaci±n del Producto . . . . . . . . . . . . . . . . . . . . . . .

3

Atualiza²ªo de produto . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Revised Regulatory Information

Federal Communications Commission (FCC)

FCC General Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

FCC Radio Frequency Interference Statement

WARNING: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct

the interference at their own expense.

Note:

It is the responsibility of the user to obtain the required

shielded cable in order to ensure compliance of this

equipment with FCC regulations.

Changes or modifications not expressly approved by Oki Data

may void your authority to operate this device.

Industry Canada (IC) Statements

IC Radio Interference Statement

This Oki Data apparatus complies with the Class A limits for

radio interference as specified in the IC Radio Interference

Regulations.

IC Interference-Causing Equipment Regulations

This Class A digital apparatus complies with Industry Canada

ICES-003.

European Union Council of the

European Communities

Statement of Conformance

This product complies with the requirements of the Council

Directives 89/336/EEC

(EMC) and 73/23/EEC (LVD) as amended

where applicable on the approximation of the laws of the member

states relating to electromagnetic compatibility and low voltage.

WARNING!

This is a Class A product. In a domestic

environment this product may cause radio interference, in

which case the user may be required to take adequate

measures.

Entering the Printer IP Address

While installing the printer driver for TCP/IP using the CD

supplied with your printer:

when you come to the screen requesting the IP Address for the

printer, you must select °IP Address± (instead of the default

°Search address±) and type in the printer²s IP Address before

c licking Next. If you need help, please contact your Network

Administrator for the IP Address to use.

LPR

Make sure there are no error conditions in the printer (e.g.,

paper jam) before you use LPR to discover the printer.

TELNET

These network print servers do

not

support TELNET.

Resetting to Factory Defaults

1.Turn off the printer.

2. Turn on the printer and wait for the print server to boot up

(about 30 seconds).

3. Press and hold the TEST button on the print server for about

15 seconds.

4. Release the TEST button.

The print server resets to the factory default settings and

reboots.

6120e_8 CROP.jpg

OKI, OkiLAN fi Oki Electric Industry Company, Ltd.;

PACEMARK fi Oki Data Americas, Inc.

Section	Page
Product Update 1	1
Mise à jour sur le produit 2	1
Actualización del Producto 3	1

Oki ML420n OkiLAN 6120e & 6120i Product Update

Oki ML420n Manual

Oki ML420n manual content summary: