Oki PM4410 OKILAN 6100e NIC CARD

Oki PM4410 Manual

Get Oki PM4410 PDF manuals and user guides View all Oki PM4410 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki PM4410 manual content summary:

  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 1
    OkiLAN 6100e® User's Guide High Performance Ethernet Network Print Server
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 2
    Okidata, OKIPAGE, OkiVIEW, OkiLAN Reg. T.M., M.D.,., OKI Electric Industry Co., Ltd.; Windows, MS-DOS Reg. T.M., Microsoft Corp.; HP LaserJet, PCL, Reg. T.M. Hewlett Packard Company; Centronics Reg. T.M., Centronics Data , T.M., International Business Machines Corp. ii OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 3
    Web JetAdmin Support II-9 Chapter 5: OkiLAN 6100e Web Configuration ......... II-11 Chapter 6: Additional Management Features II-18 Section III: Novell NetWare Chapter 1: Introduction III-3 Chapter 2: OkiNet for NetWare III-5 Chapter 3: OkiNet for NDS III-22 OKI OkiLAN 6100e User's Guide iii
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 4
    Introduction VII-2 Chapter 2: The OkiLAN 6100e Utility VII-4 Appendix A: Troubleshooting VII-10 Appendix B: Selecting Your Printer VII-14 Appendix C: Capturing With a Spooler VII-15 Section Windows 95 VIII-15 Section IX Regulatory Information IX-1 Index X-1 iv OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 5
    and Windows NT are supported in this environment. EtherTalk Macintosh System 6.x or later and LaserWriter Driver version 8.x. LAN Manager/LAN Server OS/2 version 1.3 with LAN Manager version 2.x and OS/2 version 1.3 or higher with LAN Server version 2.x and higher. OKI OkiLAN 6100e User's Guide v
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 6
    Technical Support Service Information Note: This information is valid for the United States and Canada only. Okidata On Line Visit the OKIDATA Web Site at http://www.okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate information • Dealers •
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 7
    • Availability and installation of printer drivers. (Customer service representatives are not trained to provide assistance with the use of commercial software packages. Please consult your software user's manual for times and availability of their support). OKI OkiLAN 6100e User's Guide vii
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 8
    Support Okidata Service Centers United States & Canada Okidata Tel: 1-800-OKIDATA (800-654-3282) Fax: 1-609-222-5247 Argentina Megatech Tel/Fax: (541) 371-41233 [Touch-Tone® required] Brazil Oki Data Tel: 571-616-1385 Fax: 571-616-1386 Mexico Oki Data de Mexico, S.A. de C.V. Tel: 525-661-6860 Fax
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 9
    • Printer(s) make and model numbers • Computer and network adapter card make and model numbers • Network Operating System and version number Please write these numbers down in the space provided below for future reference. Model S/N Ethernet ADDR: 00:40:68 OKI OkiLAN 6100e User's Guide ix
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 10
    Technical Support x OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 11
    Hardware Installation Section I: Hardware Installation
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 12
    Utilities in Windows .... I-8 Windows Utility Groups I-9 Appendix A: Hardware Troubleshooting I-10 OkiLAN 6100e Print Server Status I-10 Unable to Print I-11 C: Wiring Specifications I-14 Connector Specifications I-14 Appendix D: Cable Schematics I-16 I - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 13
    Hardware Installation Section I - Chapter 1 - Installing the OkiLAN 6100e Chapter 1 Installing the OkiLAN 6100e The OkiLAN 6100e 1. Turn the printer off. 2. Unplug the power cord. 3. Detach the interface cable from the back of the printer. OKI OkiLAN 6100e User's Guide I - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 14
    Section I - Chapter 1 - Installing the OkiLAN 6100e 4. Push the OPEN button, then open the top cover. 5. Remove and save the two large screws on the right side, which hold the side panel in place. 6. Pull the side panel out and remove it from the printer I - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 15
    the internal board, then pull the plate out about an inch and lift it out. Pry off the plastic cutout on the back of the printer. 7b. OKIPAGE 8c: Remove and save the three screws on the top of the metal plate covering the internal board, then pull the plate out
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 16
    8. Plug the connector on the OkiLAN board into the socket on the board in the printer. Make sure the pins are aligned properly. 9. Fasten the OkiLAN board into place with the supplied mounting screws. 10. Replace the metal plate and secure it with the screws. I - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 17
    of the way before you put the side panel back in place. 12. Secure the panel in place with the two screws. 13. Close the printer cover. If the cover doesn't close properly, tighten the screws holding the side panel in place. OKI OkiLAN 6100e User's Guide I - 7
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 18
    cable to the connector on the OkiLAN board, and the other end to the parallel connector of the printer. Secure the cable at both ends. 15. Plug the power cord into the power outlet. Installing install and the proper location for installation, then click Install. I - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 19
    for DLC (Windows 95/98) OkiNet Connect for DLC (Windows NT) TCP/IP Management Utilities OkiNet Utilities for TCP/IP OkiNet Alert for TCP/IP OkiData MIB BootP Server VINES Management Utilities OkiNet Utility for VINES OKI OkiLAN 6100e User's Guide I - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 20
    Section I - Appendix A - Hardware Troubleshooting Appendix A Hardware Troubleshooting OkiLAN 6100e Print Server Status PTR light on = printer port initialized N/W light on = n/w connection established Flashes w/n/w traffic 100 Mb On =100 Off =10 I - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 21
    call Okidata Customer Support. After initialization, press the TEST button on the back panel of the OkiLAN 6100e. If a configuration page prints, then the printer and OkiLAN are operational: any problems you experience are probably caused by the network or network connection. OKI OkiLAN 6100e User
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 22
    Sample Configuration Sheet 6100e OkiLAN 6100e Configuration Sheet Page 1 OKIDATA FAX: 1-609-222-5010 PHONE: 1-800-OKIDATA or 1-609-235-2600 General Serial Number: Ethernet Address: 92 Gleaning RARP BOOTP DHCP 255 . 255 . 255 . 0 Enabled 255 . 255 . 255 . 255 I - 12 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 23
    Running "OKI 10163" "LaserWriter" "Default Zone" " " " " Not Assigned " " Not Assigned " " Not Assigned " " Not Assigned Auto Detect ( using Sequenced RTP ) Waiting for Configuration Online Off printer Ð OKIPAGE 20 / 20n ON Ð LINE .AUT / POWER SAVING None OKI OkiLAN 6100e User's Guide I - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 24
    1 TD TRANSMIT DATA + 2 TD TRANSMIT DATA 3 RD RECEIVE DATA + 4 N/C 5 N/C 6 RD RECEIVE DATA 7 N/C 8 N/C RJ45 Pin Identification 12345678 87654321 Receptacle Plug Note: For proper operation the 10BASE-T cable must have two twisted-wire pairs. I - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 25
    nFAULT Printer Indicates a printer error condition. 16 ...... nINIT OkiLAN 6100e ... Instructs the printer to initialize. 17 ...... nSELECT IN ......... OkiLAN 6100e ... Used for IEEE 1284 compliance. 18-25 . GND N/A Ground DSUB25F Pin Identification OKI OkiLAN 6100e User's Guide I - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 26
    Section I - Appendix D - Cable Schematics Appendix D Cable Schematics PRINTER CABLE CONNECTION DIAGRAM DSUB25M Pin Centronics Pin # 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 32 16 31 17 36 18-25 19-30 SHELL SHELL I - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 27
    Advanced Management Section II: Advanced Management Features
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 28
    Additional Management Features ...... II-19 OkiNet Alert II-19 Enhanced Printer Status II-19 OkiNet for NDS II-20 OkiNet for TCP/IP (Creating Custom Views II-20 NetWare Load Balancing II-20 Windows Printing II-19 Printer Security for TCP/IP Printing II-19 I - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 29
    SNMP agent and supports any standard Printer status traps such as on-line, off-line, detached printer and printer error are also provided. The setting of certain variables causes an immediate firmware reset. These variables are listed in the private MIB under cmdReset. OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 30
    traps over both UDP and IPX. Additionally, the OkiLAN 6100e can send traps on toner low, paper jam, and printer cover open. The traps may be configured for specific destination addresses and can be configured for a particular printer port and/or printer trap. II - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 31
    for TCP/IP and the IPX, and the OkiLAN 6100e Configuration utility (telnet) allow you to specify the community names and a trap destination IP address. OKI OkiLAN 6100e User's Guide II - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 32
    VINES Outlook network management software. When running these utilities within Outlook, the same software requirements apply as when the utilities are running stand-alone. See the example OV_IDMCONTROL,0x100,OVM_ENABLED,VPMAN,,Run ESI's VINES Print Manager II - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 33
    Support Overview This section contains instructions and information on how to configure and obtain diagnostic information from your OkiLAN 6100e using the Hewlett-Packard JetAdmin software. Software a NetWare 4.x network, click the NetWare Directory Services icon from the left column. Select NDS Tree
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 34
    - Chapter 3 - HP JetAdmin Support 7. Select the desired queues from the list of Available Queues to be added into service. Click the Service button to move the selection to the Serviced Queues column. When all queues name in JetAdmin must be set to public. II - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 35
    the Specify the device address... field, enter the print server IP address, followed by a comma and then the output port number. For example, to install a printer for output port 2 of an OkiLAN 6100e with an IP address of 10.10.10.2, enter "10.10.10.2,2". OKI OkiLAN 6100e User's Guide II - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 36
    Printer Page 3 page, select a printer driver from the pull-down menu and click the Continue button. 7. On the Install Printer Page 4 page, enter a name for the printer in the Select Printer Name field and click the Install Printer button. 8. Users information. II - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 37
    Software Requirements TCP/IP Protocol Netscape Navigator 2.0 or greater and Microsoft Explorer 3.0 or greater (Other browsers may work). Note: If you experience difficulties connecting to the server, refer to Appendix A, Troubleshooting section for instruction. OKI OkiLAN 6100e User's Guide II - 11
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 38
    the pages under each menu. The right pane displays the currently selected page. If your browser does not support frames, or you select the No Frames link at the bottom of the left pane, a single page the Login as Admin link under the Configuration menu. II - 12 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 39
    screen, enter the User name and Password. The default administrator User name is admin. change the default administrator User name and Password. New User name and Password entries the OkiLAN 6100e User's Guide Section IV TCP/IP, Chapter 4 - OkiNet for TCP/IP for instructions on configuration.
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 40
    The Request Results page will list all fields that contain errors along with a description of the problem. Selecting the Back button on your browser will generally redisplay the page you just submitted and currently only configurable through the Web browser II - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 41
    the FAQ page on the OKI Web Server. Maximum URL length is 63 characters. • points to the firmware update site on the OKI FTP Server. Maximum URL length is 63 characters internal help desk. If configured, it will appear under the Support menu. Will accommodate up to 24 characters. • Custom Link
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 42
    information including the status of all printers currently attached. For more detailed status Support There are up to four links listed under the Support menu. Contact This page provides the necessary addresses and phone numbers for contacting Okidata Customer Support OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 43
    view, if desired, to control which devices are displayed. See Creating Customized Views in the OkiLAN 6100e Users Guide, Section IV. 3. Select Save View to HTML under the File menu. 4. Enter a name and save must be run again to obtain current information. OKI OkiLAN 6100e User's Guide II - 17
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 44
    - Additional Management Features Troubleshooting Server Connection • The print server only supports two simultaneous HTTP connections. This will use up one of the HTTP connections, can cause problems connecting to the server and will slow down Web response time. If 18 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 45
    Features Chapter 6 Additional Management Features OkiNet Alert OKI OkiNet Alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems before they are encountered by users. This remote management utility can be configured
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 46
    DLC protocols, the OkiNet Connect utility routes the print job to the appropriate printer without passing through a file server or print queue. This cuts down on network printing traffic. For more information, see the Windows Printing section of this manual. II - 20 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 47
    OkiLAN 6100e print server has a Printer Security for TCP/IP Printing feature which allows the printers to only be accessed from a specified list of IP addresses. This feature is accessed via TELNET option #9, TCP Connection Configuration. Advanced Management OKI OkiLAN 6100e User's Guide II - 21
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 48
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 49
    Section III: Netware NetWare
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 50
    -18 Restoring Factory Default Settings III-18 Creating Customized Views III-19 Modifying View Settings III-20 Permanently Defining SNMP Access Information III-22 III - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 51
    ...... III-28 Printing with an OkiLAN 6100e Print Server III-29 Configuring the OkiLAN 6100e Using OkiNet for NDS III-31 Adding or Removing the OKI Print Server Class III-31 NetWare OKI OkiLAN 6100e User's Guide III - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 52
    find these numbers on the OkiLAN 6100e enclosure. • Install the OkiLAN 6100e hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual. • Install the OkiNet Utility for NetWare-see Section I. III - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 53
    screen, PSC, job notification. Without supervisor intervention, other printers cannot access data sent to the queues. Data can be password protected from the file server to the printer. Data can be password protected from the file server to the printer. OKI OkiLAN 6100e User's Guide III - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 54
    NetWare utility. Note: OkiNet for NetWare contains minimal NDS configuration support. For more extensive configuration options, use the OkiNet for NDS NetWare allows you to: • Configure the OkiLAN 6100e for all Supported Protocols • Display OkiLAN 6100e Diagnostic Information • Print a Configuration
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 55
    are configurable based on the capabilities of the OkiLAN 6100e: • NetWare • Output Port • NetWare Queues • SNMP • NetWare Port • VINES • TCP/IP • EtherTalk • Protocols • SNMP Traps OKI OkiLAN 6100e User's Guide III - 7
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 56
    NDS settings need to first be created and setup using the NWAdmin or PConsole utility. Create an NDS print server object. Then, create one NDS printer object per output port. For example, Printer 1 goes to Port 1, Printer 2 goes to port 2. Attach NDS III - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 57
    to the NDS printer objects. Once you name. Note: After any change to the servicing of queues for the OkiLAN 6100e from NWAdmin you to add bindery print queues to be serviced by first selecting each desired queue and jobs can be distributed to multiple printers on selected queues by selecting the
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 58
    Options To modify the configuration settings specific to the Banyan VINES protocol such as user name and print services. For specific information on other VINES options, see Section V, Banyan VINES, or HELP button on the bottom right of the screen. I - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 59
    the appropriate character string in front of each print job to switch the printer to the PostScript printer language. • Automatic - Enables the auto language sensing function. This function examines the print job data stream and determines the required print OKI OkiLAN 6100e User's Guide III - 11
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 60
    Language to OFF for all ports of your OkiLAN 6100e. If a configuration sheet cannot be printed, troubleshooting abilities are limited. Bidirectional Printer Status Support Enable this option for enhanced status from bi-directional printers that support PJL. I - 12 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 61
    is necessary for an SNMP manager to access the OkiLAN 6100e. The system variables are for user convenience and are optional. SNMP community names are used as passwords to GET and SET information identify the OkiLAN 6100e in your SNMP-based management program. OKI OkiLAN 6100e User's Guide III - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 62
    community names. The Trap community name field is used by the OKI OkiNet Alert and other monitoring utilities for grouping or filtering OkiLAN 6100e devices. OkiNet Alert assists in managing network printers by immediately alerting you of printer problems. I - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 63
    broadcast traps to all addresses on a specific network, enter the network number in the first field and then FFFFFFFFFFFF (12 characters) in the second field. OKI OkiLAN 6100e User's Guide I - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 64
    Error Note: Toner Low, Paper Jam and Door Open require the printer to be set in PCL or Auto mode. Saving the Configuration Once all settings have been defined, select OK. The settings will be saved and you will be returned to the main OkiNet for NetWare screen. I - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 65
    • Printer • Print Server • Protocols • Network • Statistics • Technical Support • printer information. To print a configuration sheet, select the OkiLAN 6100e from the list of available print servers. Select Print Configuration Sheet from the Print Server menu bar. OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 66
    to the NetWare protocol configuration such as the mode and default file server. Banyan VINES Restores settings specific to the VINES protocol configuration such as user name and print service names. III - 18 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 67
    job may not print successfully. Creating Customized Views OkiNet for NetWare allows users to create multiple customized views for the list of OkiLAN 6100e products. By creating different views, utility will be displayed as described by the view selected. OKI OkiLAN 6100e User's Guide III - 19
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 68
    conditions Default File Server The default NetWare file server Mode The NetWare mode the print server is running Network # The IPX network number III - 20 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 69
    , follow these steps: 1. Select the first column in the Columns Displayed field. 2. Select the column to be added from the Columns Available field. 3. Select Add. OKI OkiLAN 6100e User's Guide III - 21
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 70
    products for which the OkiNet utility has defined access. To add a new serial number or network number to this list, select the Add button. I - 22 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 71
    , enter 1500001. To add a whole network, enter D4-. Delete The Delete button deletes an OkiLAN 6100e access entry in the Serial/Network Number list. NetWare OKI OkiLAN 6100e User's Guide III - 23
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 72
    users can manage OKI devices with the same utility used to manage other network objects such as printers and queues. The OkiLAN 6100e supports Windows operating systems to service, you can install OkiNet for NDS for each. OkiNet for NDS supports four different versions of OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 73
    NetWare 4.1 A single installation is required to service Windows 3.x and Windows 95 operating systems with 95: 1. Login to the directory tree as a user with Admin rights at the root of the directory tree to install OkiNet for NDS. Follow the instructions on the screen. When installing OkiNet for
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 74
    copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's NWADMIN3X.INI file. 3. Once OkiNet for NDS is installed on the : [Snapin Object DLLs Win3x] XVWNDS16.DLL=XVWNDS16.DLL III - 26 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 75
    the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's registry. 3. Once OkiNet for NDS is installed on the file dll (path to NWAdmin)\XVWNDS32.dll "Snapin Object DLLs WinNT" NetWare OKI OkiLAN 6100e User's Guide III - 27
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 76
    from the schema. See Adding or Removing the OKI Print Server section for more information. 4. Click OK. 5. Define filter and sort criteria for displaying a list of Extended Systems devices from which to choose. 6. Click OK. The following screen will display: III - 28 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 77
    supports both PServer and NPrinter mode, there are several factors to consider when choosing which mode to use. See page III-5 for more information. From the Identification page, select either PServer or NPrinter mode. If you select NPrinter mode, skip to Step 11. OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 78
    This will allow multiple printers to service a single print Printer/Queue Assignments dialog. 15. Select OK to save your printer and queue selections. 16. From the Assignments page, select OK to save changes. 17. From the file server, restart the PSERVER.nlm. III - 30 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 79
    Class. The OKI print server class will no longer show up in the Create New Object dialog. If the Remove OKI Printing Device Class option is grayed, the class has already been removed. If the option does not exist, OkiNet for NDS is not installed. NetWare OKI OkiLAN 6100e User's Guide III - 31
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 80
    add the class again. From the Tools menu in Novell's NetWare Administrator, choose Define OKI Printing Device Class. If this option is grayed, the class has already been added for NDS. The OKI print server class will now appear in the Create New Object dialog. III - 32 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 81
    Section 4 - Chapter 1 - Introduction Section IV: TCP/IP TCP/IP OKI OkiLAN 6100e User's Guide IV - 1
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 82
    Section 4 - TCP/IP In This Section Chapter 1 Introduction IV-5 Overview IV-5 Software Requirements IV-5 Network Preparation IV-6 Before You Start IV-6 Overview of TCP/IP Configuration IV 30 Enabling/Disabling Protocols IV-32 SNMP Trap Configuration IV-32 IV - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 83
    Chapter 5 Telnet Configuration IV-42 Overview IV-42 Running a Telnet Session IV-42 Appendix A Troubleshooting IV-48 Main Status Indicator IV-48 Restoring the OkiLAN 6100e to Factory Defaults IV-48 Unable for Printing with the OkiLAN 6100e IV-74 TCP/IP OKI OkiLAN 6100e User's Guide IV - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 84
    Section 4 - TCP/IP Configuring Solaris 2.x for Printing with the OkiLAN 6100e IV-76 Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6100e ....... IV-77 IV - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 85
    TCP/IP utility, or from a computer supporting the OkiNet for NetWare utility, Banyan VINES OkiNet for VINES utility, OR telnet and one of the following: • Manual arp table entry and ping • Static route entry using route add command • DHCP • RARP • BOOTP TCP/IP OKI OkiLAN 6100e User's Guide IV - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 86
    and a hostname (alias) to the OkiLAN 6100e. Use the network name service or the "/etc/hosts" file to add the OkiLAN 6100e to the hardware and connect the cabling. Instructions for hardware installation are found in Section I of this manual. • Write down the serial - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 87
    network uses a name service, add the host name and IP address to the name server. Most TCP/IP networks use the Network Information Service (NIS), Domain Name Service (DNS) or the "/etc/hosts" database. See your network documentation for instructions. TCP/IP OKI OkiLAN 6100e User's Guide IV - 7
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 88
    NetWare - This windows utility must be run from a Novell NetWare client. See Section III of this manual for specific information. • OkiNet for VINES (VPMAN) Utility - This Windows utility must be run from . If the OkiLAN6100e receives a ping packet within two IV - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 89
    ping packet as its own address. To use Gleaning, you must have Windows 95, Windows NT, or super-user privileges on a UNIX system. 1. Add an entry in the ARP table that assigns an IP address to : Gleaning does not work with Windows NT Workstation 3.5. TCP/IP OKI OkiLAN 6100e User's Guide IV - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 90
    it. If the OkiLAN 6100e finds another device is using the address, it will refuse the address and start looking for a new address. IV - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 91
    's network routing table. To use the route command, you must have Windows 95, Windows NT or super-user privileges under UNIX. The syntax for this command is: route add 198.102.102.254 "IP address of that maps the Ethernet hardware addresses of devices on the OKI OkiLAN 6100e User's Guide I - 11
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 92
    system supports, request the manual page for the protocol's daemon (e.g. man bootpd or man rarpd), or see your network manuals. Both protocols require that you add the product's network hardware address and IP address to a configuration file. See your network documentation for instructions or
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 93
    button, through the OkiNet or OkiNet for VINES utilities or via telnet. • If the settings appear to be correct, try repeating the installation steps. If problems persist, call Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). OKI OkiLAN 6100e User's Guide I - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 94
    originally part of the Berkeley Software Distribution (BSD) version of the UNIX operating system. Remote LPD was quickly adopted as a de facto standard. As a result, Remote LPD is now supported by most versions of the UNIX operating system and by many TCP/IP IV - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 95
    will service the print job. All Remote Print Queue Names should end with the number 1, 2, 3 or 4. If a number is not specified, the OkiLAN 6100e will use printer port 1. The OkiLAN 6100e is designed to handle many different types of printers and print data. Typically you will select the printer type
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 96
    feed, the OkiLAN 6100e appends a form feed. This form feed prompts the printer to print any partial page at the end of the job. LF Use the Queue For remote BSD-Style LPD printing, add the OkiLAN 6100e as a remote printer in the "/etc/ printcap" database to each host printing to the OkiLAN 6100e.
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 97
    directory to work properly. When you are ready to print, use the local_print_queue_name that matches the data type of the file to be printed. OkiLAN 6100e_name This is the name (alias) of the create a unique spool directory for each printcap entry. TCP/IP OKI OkiLAN 6100e User's Guide IV - 17
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 98
    Example: If you are printing to an ASCII printer that requires a carriage return/line feed, you may to a Remote LPD system varies among the vendors that support TCP/ IP. UNIX systems that are BSD-based software vendor for assistance troubleshooting LPD. IV - 18 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 99
    and receiving files. The OkiLAN 6100e supports a subset of the FTP command set. This subset allows the FTP user to open a connection to the OkiLAN 6100e, specify a file transfer data type and send print files to results. SEND Treated the same as PUT. TCP/IP OKI OkiLAN 6100e User's Guide IV - 19
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 100
    Print multiple files. TYPE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported. ASCII Equivalent to "TYPE ASCII". BINARY Equivalent to " This may cause unexpected or undesired printing results. IV - 20 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 101
    a PostScript file called chart.ps to the OkiLAN 6100e printer Port 1 using FTP. $ ftp OkiLAN 6100e_name chart.ps remote: MPX1 200 PORT command successful. 150 Opening BINARY mode data connection for MPX1. 226 Transfer complete. 4549 bytes sent in 0 OKI OkiLAN 6100e User's Guide IV - 21
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 102
    port connection to send data to the OkiLAN 6100e. A TCP/IP port has been assigned to the output port of the OkiLAN 6100e as follows: TCP/IP Port: 9100 Output Port: 1 Consult your system documentation for information on how to submit print jobs to a raw port. IV - 22 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 103
    IP. OkiNet for TCP/IP provides SNMP-based support for the entire OkiLAN 6100e family of print Configure an OkiLAN 6100e for all Supported Protocols • Display OkiLAN 6100e Diagnostic vendors including the following: • Microsoft • FTP Software • Trumpet • NetManage • Distinct For more information
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 104
    file folder tabs. The following settings are configurable: • TCP/IP • NetWare • NetWare Port • NetWare Queues • VINES • Ethertalk • Output Port • SNMP • Protocols • SNMP Traps IV - 24 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 105
    . • Use Network Protocol - Select this option to use RARP, BOOTP or DHCP to determine the IP address at power up. Specify which protocol(s) to use. OKI OkiLAN 6100e User's Guide IV - 25
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 106
    you are using DHCP for IP address resolution, select this option to obtain the address of the WINS Server from the DHCP Server. IV - 26 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 107
    you to add bindery print queues to be serviced by first selecting each desired queue and then selecting Print jobs can be distributed to multiple printers on selected queues by selecting the same the Banyan VINES protocol such as user name and print services. For specific information on VINES options
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 108
    options: OFF, PCL, PostScript or Automatic. Unless OFF is selected, a language switching character string will be inserted before each print job. The Printer Type selection is used to determine the actual characters required to switch your printer's language. IV - 28 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 109
    the PCL print language. PostScript Switch Sequence Enter the character string to switch the printer to the PostScripti print language. Configuration Page Language Select the appropriate printer language for printing configuration pages on your printer. TCP/IP OKI OkiLAN 6100e User's Guide IV - 29
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 110
    Support Enable this option for enhanced status from the bidirectional printer. SNMP Configuration Options SNMP options specify which information is necessary for an SNMP manger to access the OkiLAN 6100e. The system variables are for user management program. IV - 30 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 111
    OkiNet for TCP/IP System Contact Enter any information useful to a user if problems with the OkiLAN 6100e arise. System Location Enter a description of the Alert assists in managing network printers by immediately alerting you of printer problems. TCP/IP OKI OkiLAN 6100e User's Guide IV - 31
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 112
    are managing an OkiLAN 6100e or getting system information using SNMP. Protocol Select the protocol for which you wish to configure trap information. IV - 32 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 113
    : • On-line • Off-line • No Printer Attached • Paper Out • Paper Jam • Door Open • Toner Low • Printer Error The toner low, door open and paper jam traps require that your printer be set to automatic emulation switching (the default) or PCL emulation. TCP/IP OKI OkiLAN 6100e User's Guide IV - 33
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 114
    Diagnostic information is available on the following topics: • Printer • Print Server • Protocols • Network • Statistics • Technical Support • System Printing a Configuration Sheet The configuration sheet a job is printing, the job may not print successfully. IV - 34 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 115
    Banyan VINES Restores settings specific to the VINES protocol configuration such as user name and print service names. EtherTalk Restores settings specific to the EtherTalk protocol configuration such as printing, the job may not print successfully. TCP/IP OKI OkiLAN 6100e User's Guide IV - 35
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 116
    multiple customized views for the list of OkiLAN 6100e products. By creating different views, the user can narrow the information displayed to that which is of highest priority. These views can 6100e list will be displayed as described by the view selected. IV - 36 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 117
    the list of product types Status Select from the list of status conditions Subnet Mask XXX.XXX.XXX.XXX; use "*" for groups / subnets TCP/IP OKI OkiLAN 6100e User's Guide IV - 37
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 118
    added to the end of the list and the column will be displayed to the right of the last column on the screen. IV - 38 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 119
    Set information on the OkiLAN 6100e through OkiNet for TCP/IP, community names must match the community names assigned to the OkiLAN 6100e. TCP/IP OKI OkiLAN 6100e User's Guide IV - 39
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 120
    of OkiLAN 6100e print servers, enter 198.168.42.*. Delete The Delete button deletes an OkiLAN 6100e access entry in the IP address. IV - 40 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 121
    other devices on the network. If there are problems using the given port number, select a new to communicate with devices supporting telnet. A telnet OKI has provided a stand-alone BOOTP server to help assign IP addresses to the OkiLAN 6100e. To access the stand OKI OkiLAN 6100e User's Guide IV - 41
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 122
    Configuration utility (telnet) provides system, network and printer status information and allows you to change the users can alter the configuration. Running a Telnet Session 1. To run the configuration utility, type the following: telnet 2. Replace OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 123
    and press Enter. To quit, press Enter. Showing Network/Printer Information (Option 1) This option displays current network and printer information. Changing the Password (Option 2) This option allows been configured to use a permanent IP address, a TCP/IP OKI OkiLAN 6100e User's Guide IV - 43
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 124
    . Note: If you select an invalid subnet mask you may not be able to access the OkiLAN 6100e. Use this option with care! IV - 44 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 125
    printer. For a description of language switching options, see pages IV-28 and IV-29. Configure Printer Type This option enables you to indicate the printer type to which the OkiLAN 6100e is connected. Printer choices are: 1. Okidata printer. 2. Custom printer. TCP/IP OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 126
    • Language Switching Sequence - If you select Custom Printer from the Configure Printer Type screen, you must indicate the switching sequence to World Wide Web: http://www.okidata.com Firmware update instructions are available with the download file. IV - 46 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 127
    the TCP/IP protocol to factory defaults. If you reset the OkiLAN 6100e while a job is printing, the job may not print successfully. TCP/IP OKI OkiLAN 6100e User's Guide IV - 47
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 128
    Section 4 - Appendix A - Troubleshooting Appendix A Troubleshooting Main Status Indicator Upon power-up, the main status indicator flashes orange. It changes to green turns solid green. 3. Power cycle the OkiLAN 6100e. It will have restored itself to defaults. IV - 48 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 129
    4 - Appendix A - Troubleshooting Unable to Assign IP Address Gleaning If you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • Verify the ARP the "/etc/ethers" and "/etc/hosts" files. TCP/IP OKI OkiLAN 6100e User's Guide IV - 49
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 130
    4 - Appendix A - Troubleshooting UNIX BOOTP If you are HUP tells it to reread "/etc/bootptab". Most BOOTP servers support this option. Check your local BOOTP documentation. If this does not work, restart the its internal bootptab tables. IV - 50 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 131
    4 - Appendix A - Troubleshooting Static Route Entry If the you intended. While in telnet, select the second menu option, Show Network/Printer Information. The hardware address and serial number are displayed. Verify they are the does not support telnet. TCP/IP OKI OkiLAN 6100e User's Guide IV - 51
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 132
    - Troubleshooting OkiNet Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). System CRC Failed The OkiLAN 6100e has failed. • Power cycle the OkiLAN 6100e once. If the error continues, call Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). IV - 52 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 133
    check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6100e is also set to PostScript. • Try pinging the OkiLAN 6100e by its IP address (not the hostname). This will verify the unit is functioning on the network. TCP/IP OKI OkiLAN 6100e User's Guide IV
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 134
    indicator blinks green, the printer is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6100e is might have a TCP/IP configuration problem with the OkiLAN 6100e. IV - 54 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 135
    broadcast its network hardware address in a BOOT request packet. A BOOTP server (which may be a UNIX workstation) will respond with an IP address. The TCP/IP OKI OkiLAN 6100e User's Guide IV - 55
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 136
    this function using one configuration file and one or more daemons. The configuration file is "/etc/ bootptab" and the daemon is called bootpd. IV - 56 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 137
    up the network hardware address in the "/etc/bootptab" file. The bootpd daemon finds the associated IP address of the device in the bootptab file. OKI OkiLAN 6100e User's Guide I - 57
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 138
    options differ from one UNIX workstation to another. Perform a man ps at the UNIX prompt to consult a manual page on the ps command for a particular workstation. If bootpd is not running on a workstation, type the subnet of the host running the BOOTP server. IV - 58 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 139
    expressed in 4 bytes in decimal format usually separated by periods. Each decimal byte has a range from 0 to 255. Example: 192:168:42:55 TCP/IP OKI OkiLAN 6100e User's Guide IV - 59
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 140
    in the "/etc/ethers" file. The rarpd daemon finds the host name, OKIPRINTER, listed as the name associated with the network hardware address. IV - 60 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 141
    options differ from one UNIX workstation to another. Perform a man ps at the UNIX prompt to consult a manual page on the ps command for a particular workstation. If rarpd is not running on a workstation, type the RARP server belong to the same subnet. TCP/IP OKI OkiLAN 6100e User's Guide IV - 61
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 142
    on the HP-UX system to which print jobs that are destined for a printer attached to the OkiLAN 6100e will be directed. • OKIPRINTER - The host must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 143
    type man inetd or man inetd.conf. 4. Make sure the following entry is in the "/etc/services" file printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c oriented interface that works best at the console.) TCP/IP OKI OkiLAN 6100e User's Guide IV - 63
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 144
    f) Make this the system default printer? (y or n) n g) Printer class - (optional) h) Restrict cancel - (optional) i) Remote printer on a BSD system? (y or n) - y Tells the HP-UX system that it is communicating with a Berkeley style remote printer (such as LPD). I - 64 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 145
    printer you just created using SAM. Peripheral Devices -> Printers and Plotters -> Enable a Printer ... 7. Printer directed. The print jobs are destined for a printer attached to the OkiLAN 6100e. • OKIPRINTER - The 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 146
    etc/inetd.conf" will tell inetd to auto-start the rlp daemon and service the pending print request. This is helpful if the daemon died or was "/etc/services" file: printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c IV - 66 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 147
    on the OkiLAN 6100e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. TCP/IP OKI OkiLAN 6100e User's Guide IV - 67
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 148
    name on the HP-UX system to which print jobs will be directed. The print jobs are destined for a printer attached to the OkiLAN 6100e. • OKIPRINTER - The host name of the remote system which is the OkiLAN 6100e. the OkiLAN 6100e, the IP Address may be used. IV - 68 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 149
    2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the entry is in the "/etc/inetd.conf" file: printer stream tcp nowait root "/usr/lib/ rlpdaemon" rlpdaemon tell inetd to auto-start the rlp daemon and service the pending print request. This is helpful if the
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 150
    /services" file: printer printer as referenced by the local HP machine. Print jobs sent to this printer are passed to the OkiLAN 6100e. b) Remote system name - OKIPRINTER The name of the OkiLAN 6100e on the network. The name must also be in the /etc/hosts file. IV - 70 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 151
    service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. f) Printer class - (optional) g) Make this the system default printer lp -d lj4 filename TCP/IP OKI OkiLAN 6100e User's Guide IV - 71
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 152
    name of the SCO system to which print jobs that are destined for a printer attached to the OkiLAN 6100e will be directed. • OKIPRINTER - The host must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 153
    saying Run '/etc/rlpconf' to change the remote printer description file. Do NOT run "/etc/rlpconf". We will be performing the functions of "/etc/rlpconf" manually. 5. The next prompt is Do you want to the UNIX prompt, type: mkdir /usr/spool/lpd/lj4. TCP/IP OKI OkiLAN 6100e User's Guide IV - 73
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 154
    name on the AIX system to which print jobs that are destined for a printer attached to the OkiLAN 6100e will be directed. • OKIPRINTER - The host and must end with 1 or 2, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 155
    so that users can spool Print Jobs and Printers) Manage Remote Printer Subsystem Client Services Remote Printer Queues Add hosts" file. c) Name of QUEUE on remote printer yourqueuename d) NAME of device to add - "any this name has no effect on the print service for the OkiLAN 6100e. Enter any name
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 156
    and Printers) Manage Remote Printer Subsystem Server Services lpd Remote Printer Subsystem system to which print jobs that are destined for a printer attached to the OkiLAN 6100e will be directed. • 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 157
    LPD daemon is running on the Solaris system. Procedure To configure the Solaris machine so users can spool print jobs to the pcl print queue on the OkiLAN 6100e named OKIPRINTER, are destined for a printer attached to the OkiLAN 6100e will be directed. TCP/IP OKI OkiLAN 6100e User's Guide IV - 77
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 158
    of the queue on the OkiLAN 6100e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will daemon is running by using the ps command described previously. IV - 78 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 159
    lib/lpd ] ; then rm -f /dev/printer/var/spool/lpd.lock /usr/lib/lpd; echo -n ' printer' fi Procedure To configure the Sun-OS or Ultrix machine so that users can spool print jobs to the pcl print by issuing the following command: lpr -Plj4 filename TCP/IP OKI OkiLAN 6100e User's Guide IV - 79
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 160
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 161
    Section V: Banyan VINES Banyan VINES
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 162
    OkiLAN 6100e V-6 Overview V-6 Adding the OkiLAN 6100e as a User V-6 Creating Print Services V-8 Chapter 3 The OkiNet for VINES Utility V-13 Overview Status Information V-22 Appendix A Troubleshooting V-23 Unable to Print V-23 Print Manager Errors V-23 V - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 163
    . OkiNet for VINES also provides status information regarding your current configuration or printer status. Note: The PCPRINT option must be installed on the server(s) where the printer services reside. OkiLAN 6100e supports Banyan VINES version 5.0 and higher. Before You Start • Install the OkiLAN
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 164
    redirects the output file to the proper print service for printing. SETPRINT SETPRINT is a command used to redirect local ports to print services. BPRINT BPRINT prints a file to a network printer. BPRINT will be used to verify printing from the OkiLAN 6100e. V - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 165
    Section 5 - Chapter 1 - Introduction Related Documents Your printer manuals contain related information about printer configuration. Your Banyan VINES manuals contain related information about network configuration and printing operation. Banyan VINES OKI OkiLAN 6100e User's Guide V - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 166
    using the VINES MANAGE utility. For more information on Adding a User, refer to the Banyan VINES manual, Managing VINES Users and StreetTalk. 1. Type MANAGE at the system prompt. The System Management menu will appear. 2. Select 2 - Users and press Enter. V - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 167
    when using the OkiNet for VINES utility. 5. The next screen is Add User Profile. The OkiLAN 6100e does not require any access rights while operating on the rights to the user. If no such profile exists, select any profile and then edit to remove access OKI OkiLAN 6100e User's Guide V - 7 Banyan
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 168
    . Make sure the OkiLAN 6100e's StreetTalk Name is listed as a destination for the print service. Note: The existing print service must be configured for a PC Print Destination. The PCPRINT option must be installed on the server where the printer service resides. V - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 169
    Banyan VINES manual, Managing VINES Services. 1. Type Manage at the system prompt. The System Management menu will appear. 2. Select 1 - Services and press Enter. Banyan VINES 3. At the Manage Services menu, select ADD a server-based service, and press ENTER. OKI OkiLAN 6100e User's Guide V - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 170
    your selection and press Enter. Note: PCPRINT must be installed on this server. 6. Next, the Select Type of Service screen will be displayed. Select VINES print service and press Enter. 7. Select the disk where you want to create the service and press Enter. V - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 171
    to add another destination. You may add another destination at this time or select NO to make the OkiLAN 6100e the exclusive destination of this service. OKI OkiLAN 6100e User's Guide V - 11 Banyan VINES
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 172
    jobs. Press F10 to return to the Manage Services menu. To create a second print service, repeat steps 3-14. To return to the public directory, press Esc three times. To complete the OkiLAN 6100e installation, continue to Chapter 3, The OkiNet for VINES Utility. V - 12 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 173
    . OkiNet for VINES is provided by OKI to configure and manage the OkiLAN 6100e. OkiNet for VINES supports Banyan VINES versions 5.0 and higher. User Name and Print Service(s) for the OkiLAN 6100e (Chapter 2). • Install OkiNet for VINES - see Section I. Banyan VINES OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 174
    , consult your system administrator. For more information about access rights, see the Banyan VINES manual, Managing VINES Security. Running the OkiNet for VINES Utility The VINES Print Manager screen will for the OkiLAN 6100e you are trying to locate. V - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 175
    media) Timeout The time in seconds OkiNet for VINES waits for responses when searching for OKI print servers. (Max 40 seconds, Default = 4 seconds) Broadcast Number of broadcasts by Print Services or by the User Login Name of the OkiLAN 6100e. Banyan VINES OKI OkiLAN 6100e User's Guide V - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 176
    blank. Description Use this field to store a description of the OkiLAN 6100e. Examples might include storing location, phone numbers, or a contact person. Print Services This field lists all print services currently included as services of the OkiLAN 6100e. V - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 177
    selection is used to determine the actual character string required for your printer. If your printer type is not listed, select Other. Enter the required character stings for switching your printer language into the PCL or PS Sequence fields. Banyan VINES OKI OkiLAN 6100e User's Guide V - 17
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 178
    a network printer. The command syntax is: BPRINT filename/P:service_name where... filename is the name of the file you want to print. Service_name is the StreetTalk name of the Print Service you established the factory default configuration of your OkiLAN 6100e. V - 18 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 179
    3 - The OkiNet for VINES Utility Restore VINES Defaults Clears the Print Service names assigned and user name/password. This does not affect the configurations of other protocols. Restore from generating any network traffic from that protocol. Banyan VINES OKI OkiLAN 6100e User's Guide V - 19
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 180
    OkiLAN 6100e has been configured to remember its IP address, it does not need to determine its address each time it is powered on. V - 20 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 181
    subnet mask specified. If you select an invalid subnet mask, you may not be able to access the OkiLAN 6100e via TCP/IP. Banyan VINES OKI OkiLAN 6100e User's Guide V - 21
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 182
    corresponds to the state of the print service, such as printing or waiting. It may also display an error message. Printer Status This information describes the status of your printer. For example, it may identify the printer as on-line or out of paper. V - 22 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 183
    the Printer Service resides. • Make sure the destination is a PCPRINT. • Another printer network interface card or a client running PCPRINT may already be attached to the service. • Check that the Print Service has not been stopped via the MANAGE utility. Banyan VINES OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 184
    print service using the MANAGE utility. Make sure the print service error has not occurred due to a typographical error. Also, check that the StreetTalk User Name you created in the MANAGE utility matches the StreetTalk Name you specified in OkiNet for VINES. V - 24 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 185
    Troubleshooting error information. If you need further explanation, call Okidata Customer Support at 1-800-OKIDATA (1-800-645-3282). Unable to locate print OkiLAN 6100e. If you are still unable to locate your printer server, you may need to increase the hop count OKI OkiLAN 6100e User's Guide V - 25
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 186
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 187
    LAN Manager/ Server Section VI: LAN Manager/LAN Server
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 188
    VI-5 Installing the Utilities Software VI-6 Running INSTALL VI-7 Running OkiNet for OS/2 VI-8 Creating an OS/2 Printer VI-9 Printing a Configuration Help VI-16 Appendix A Troubleshooting VI-17 No Configuration Sheet VI-17 Unable to Print VI-17 VI - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 189
    Nodes A printer connected to the network can be accessed from DOS and other network nodes properly configured as LAN Manager/LAN Server client nodes. You should be familiar with the OS/2 Print Management utilities. See your OS/2 manuals for more information. OKI OkiLAN 6100e User's Guide VI - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 190
    protocol stack must be loaded and running on the file server from which the OKI Network Printer Redirector will run. With LAN Manager, this means you must enable the The 802.2 Type I network protocol used by the OKI Network Printer Redirector cannot be routed by routers which operate on specific
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 191
    the 802.2 protocol. • LAN Server 3.0 users must run the LAPS utility and select the 802.2 protocol. • OS/2 Warp Users must run the MPTS utility and select the 80w.w protocol. See your network administrator or the LAN Manager/LAN Server manuals for instructions. OKI OkiLAN 6100e User's Guide VI - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 192
    are planning your install. Depending on your current configuration, the following software may also be needed: • Printer driver installation diskettes. These diskettes are provided with the OS/2 operating system or the OkiLAN 6100e or to view port information. VI - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 193
    the system, the OS/2 spooler will load the OKI Network Printer Redirector. Running INSTALL 1. Login to the server with action. 7. Select Exit. Completing the Installation After the OKI software has been installed, you must do the following: 1. Verify . OKI OkiLAN 6100e User's Guide VI - 7
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 194
    you can print via the OkiLAN 6100e, you must first add a local printer port to your OS/2 server. 1. Select the Network Printing Tools folder on Local Port Name, and enter a name that will help you identify the local printer port. The name must begin with "\PIPE\", which is provided by default. It
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 195
    OS/2 Printer To print to the local port created by OkiNet for OS/ 2, you must create an OS/2 printer. OS/2 a new printer. 5. Configure the printer as you would configure a directly-attached printer. Set . 2. Enter the name of the printer, the default printer driver and the output port. For the
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 196
    will have to reconfigure the OkiLAN 6100e to print the configuration sheet in PostScript. The configuration sheet will print to all connected printers. A configuration sheet will print automatically if the OkiLAN 6100e fails due to a network protocol error. VI - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 197
    To specify the printer attached to the OkiLAN 6100e as the OS/2 default printer, do the following: 1. From the desktop, right-click on any printer icon. 2. Select the right arrow next to Set Default. A list of print queues defined for your system will display. OKI OkiLAN 6100e User's Guide VI - 11
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 198
    the default printer will now print to the printer attached to the OkiLAN 6100e. The OS/2 print screen function uses the OS/2 default printer. This function command from an OS/2 prompt on the server where the software utilities were installed: C>NET SHARE MPXLPT /PRINT Any applications using LPT1 will now
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 199
    not attached to an OS/2 printer queue. The local port cannot be deleted if it is attached to an OS/2 printer queue. 2. Login to the server additional local ports, follow the Running OkiNet for OS/2 instructions on page VI-8. Configuring a Print Server OkiNet for OKI OkiLAN 6100e User's Guide VI - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 200
    Print Configuration Sheet option. Configuring Parallel Port P1 Ports P1 and P2 must be configured based on the printer you intend to use. 1. From the Configure Print Server window, choose a print server from the printing, the job may not print successfully. VI - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 201
    is TEXT. If the connected printer is a PostScript-only printer, you must configure the OkiLAN 6100e to print the configuration sheet in PostScript. The configuration sheet will print automatically if the OkiLAN 6100e fails due to a network protocol error. OKI OkiLAN 6100e User's Guide VI - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 202
    specific topic, select Help from the main menu, then select Help Index. See your OS/2 manual form information on using on-line help. Context-Sensitive Help Context-sensitive help is available from many selected, provide information about that specific window. VI - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 203
    data to the printer via the OkiLAN 6100e, you may want to check the following: • Printer configuration • Printer hardware • Computer network adapter cards • Cabling and/or connectors application software configuration • Cable adapters • OkiLAN 6100e port configuration OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 204
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 205
    EtherTalk Section VII: EtherTalk
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 206
    Printer ......... VII-6 Selecting a Zone VII-6 Print Configuration VII-7 Status VII-7 Advanced Configuration Options VII-7 Appendix A Troubleshooting VII-11 OkiLAN 6100e Utility Errors VII-12 Appendix B Selecting Your Printer VII-15 Appendix C Capturing With a Spooler VII-17 Overview VII
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 207
    connect the cabling. Instructions for hardware installation are found in Section I of this manual. 2. Write down the serial number and Ethernet address of the OkiLAN 6100e. 3. Copy the files from the CD-ROM to a utilities folder on the Macintosh hard drive. OKI OkiLAN 6100e User's Guide VII - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 208
    Section 7 - EtherTalk 4. Consult your network administrator before using the OkiLAN 6100e utility. Changing the OkiLAN 6100e Name or Zone may require users to reselect the OkiLAN 6100e in the Chooser. Print servers and spoolers may also need to be reconfigured after the OkiLAN 6100e product's
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 209
    OkiLAN 6100e utility allows the user to: • Change the Turn on your printer and check that it printer. 2. Turn on the OkiLAN 6100e. The status LED should turn solid green. 3. Copy the files from the diskette labeled OKI zone to search for OkiLAN 6100e printers. Shift-click to select multiple zones
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 210
    a Zone 1. Choose the OkiLAN 6100e printer you wish to rezone. 2. Select Zone from the Configure pull-down menu. 3. Choose the zone in which you want the printer to appear. Note: If no Phase 2 router was found, this option will be unavailable. 4. Click OK. VII - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 211
    supports two AppleTalk Types: • Type1 (mandatory) - The Type 1 default is LaserWriter. This option should not be changed unless the user wishes to use a print spooler without bypass or the user does not want the printer to respond to any of the LaserWriter drivers. OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 212
    Print Config, and Restore Defaults. A port should be disabled when no printer is attached. Note: It is possible to disable all ports but this factory defaults. The following OkiLAN 6100e variables will restore to default: Name: OKI Port (for single port products, the
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 213
    troubleshoot problems you may have installing or using the EtherTalk protocol. After trying these suggestions, if you are still having difficulty, call Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). If you have trouble sending data to the printer . OKI OkiLAN 6100e User's Guide VII - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 214
    driver version 8.0 or later. • Verify the printer supports PostScript Level 2 via the printer test/ configuration sheet. • If the status message Printer Error: Bi-Di communication on printer prints successfully, your problem may be document-specific. Check for VII - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 215
    Appendix A - Troubleshooting problems in the document. If your printer has error handling capability printer for activity. If you see activity but no output, data is reaching the printer, but the printer is aborting the job. A PostScript printer correct zone. OKI OkiLAN 6100e User's Guide VII - 11
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 216
    and appears in the Chooser. If not, refer to general EtherTalk troubleshooting. • Verify the Macintosh you are using is running Phase 2 EtherTalk : Incompatible version of OkiLAN 6100e utility. Recommended Action: Call 1-800-OKIDATA (1-800-654-3282). Message: NBP Lookup Error. Recommended Action: Try
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 217
    EtherTalk Section 7 - Appendix A - Troubleshooting Message: "Name" @ "Zone" is not responding. Verify the OkiLAN 6100e is powered on. To reconnect with the lost. Return to the zone selection window and search the network again to display the new information. OKI OkiLAN 6100e User's Guide VII - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 218
    Section 7 - Appendix A - Troubleshooting Message: There is not enough memory to perform the requested action. Recommended Action: Closing windows is disabled. Message: Unexpected AppleTalk error. Recommended Action: Check the network connection. Try again. VII - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 219
    zone. 1. Click on the zone in the AppleTalk Zones box where your printer is located. (You may also need to scroll through the zones to locate the one you want.) If you do not know the zone in which your printer is located, contact your network administrator. OKI OkiLAN 6100e User's Guide VII - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 220
    exit the Chooser. 4. Print a directory from your Macintosh by selecting Print Directory, Print Window or Print Desktop from the File pull-down menu. If your printer prints a directory, you have connected your printer to your network correctly. VII - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 221
    to remove Type 2. The two device types should be: • Type 1 : LaserWriter • Type 2 : (none) Capturing with Bypass Capture or release without using the OkiLAN 6100e utility. OKI OkiLAN 6100e User's Guide VII - 17
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 222
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 223
    Section VIII: Windows Printing Windows Printing
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 224
    6100e Connect for TCP/IP ........ VIII-14 OkiLAN 6100e Connect for DLC VIII-16 Output Port Configuration Options ......... VIII-18 Enabling/Disabling VIII-18 VIII - 2 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 225
    6100e Set Up for Windows NT 4.0 Overview This section contains instruction and information on how to set up your OkiLAN 6100e for direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6100e Connect has OKI OkiLAN 6100e User's Guide VIII - 3
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 226
    Settings and then Printers. 3. Select the Windows printer from which you would like to print with the OkiLAN 6100e Connect, then select Properties from the menu. 4. Add an OkiLAN 6100e Connect port. This may be done by selecting Add Port under the Ports tab. VIII - 4 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 227
    if the IP address changes. 7. Click OK. You will now be able to use OkiLAN 6100e Connect for TCP/IP. Whenever you print to the printer configured with OkiLAN 6100e Connect, your print job will go directly to the OkiLAN 6100e print server port. OKI OkiLAN 6100e User's Guide VIII - 5
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 228
    Port under the Ports tab in the Properties screen. Notify On Printer Error This feature will check the printer status prior to printing the job. If a printer error is detected (e.g. printer off-line or out of paper) the error description will be given. VIII - 6 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 229
    Windows NT installation; therefore, it will need to be installed. In order to set up an LPR printer in Windows NT 4.0, the system must have an IP address, the print server must have an IP it is suggested to use 10.10.10.1). Click OK. Windows Printing OKI OkiLAN 6100e User's Guide VIII - 7
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 230
    2. Select the Services tab. 3. Printers and then select Add Printer. 2. Select My Computer and click Next. 3. Click the Add Port button. 4. On the Printer Ports screen, select LPR Port from the list of Available Printer Ports and click the New Port button. VIII - 8 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 231
    added is selected and then click Next. Windows Printing 9. Select a printer driver and click Next. 10. Enter a name for the printer and click Next. 11. To share the printers with others on the network, select Shared and enter a share name for the printer. OKI OkiLAN 6100e User's Guide VIII - 9
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 232
    that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6100e Connect allows you to print the instructions below: 1. Install the OkiLAN 6100e Connect for TCP/IP files-see Section I. VIII - 10 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 233
    for Data-Link Control (DLC) provides a direct printing solution for users in printer, and send jobs to the printer. Note: To obtain a version of OkiLAN 6100e Connect for DLC that supports Windows NT, visit our web site (www.Okidata.com) or contact Customer Support. OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 234
    Protocol and Related Components from the Add Network Software window. Click Continue. 5. Select Connectivity Utilities and TCP/IP Network Printing Support from the Windows NT TCP/IP Installation Options 7. Shutdown the application and restart Windows NT. VIII - 12 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 235
    prompt. 6. Enter a number indicating the desired print server's output port for the printer name prompt and click OK. For example, for port 1 enter P1, for port 2 enter P2, etc. 7. Click OK from the Create Printer window to add the printer. Windows Printing OKI OkiLAN 6100e User's Guide VIII - 13
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 236
    for Windows 95 Chapter 3 OkiLAN 6100e Set Up for Windows 95 Overview This section contains instruction and information on how to set up your OkiLAN 6100e for a Windows 95 environment. Print is complete, click on Start, Settings and then Printers. VIII - 14 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 237
    Section 8 - Chapter 2 - OkiLAN 6100e Setup for Windows 95 3. Select the Windows printer from which you would like to print with OkiLAN 6100e Connect, then select Properties from only. Non-local print servers will not be rediscovered if the IP address changes. OKI OkiLAN 6100e User's Guide VIII - 15
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 238
    you have printing problems while using the Data-Link Control (DLC) provides a direct printing solution for users instructions below: 1. Install OkiNet for DLC - see Section I. 2. When the installation is complete, click on Start, Settings and then Printers. VIII - 16 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 239
    OkiLAN 6100e Setup for Windows 95 3. Select the printer driver from which you would like to print with OkiLAN 6100e Whenever you print to the printer configured with OkiLAN 6100e Connect, your print job will go directly to the OkiLAN 6100e print server port. OKI OkiLAN 6100e User's Guide VIII - 17
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 240
    printing problems printer. Enabling/Disabling To enable or disable protocols on the OkiLAN 6100e, select the Protocols tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6100e will no longer communicate using that protocol. VIII - 18 OKI OkiLAN 6100e User's Guide
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 241
    Section IX: Regulatory Information Regulatory Information
  • Oki PM4410 | OKILAN 6100e NIC CARD - Page 242
    according to the manufacturer's instructions, this equipment may equipment on, the equipment is probably the source of your problem. • Connect the equipment and the receiver to different an experienced radio/TV technician for additional advice. OKI is not responsible for radio/TV interference caused
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
OkiLAN 6100e
®
User’s Guide
High Performance Ethernet Network Print Server