Oki Pro6410 NeonColor Network Guide

Oki Pro6410 NeonColor Manual

Get Oki Pro6410 NeonColor PDF manuals and user guides View all Oki Pro6410 NeonColor manuals
Add to My Manuals
Save this manual to your list of manuals

Oki Pro6410 NeonColor manual content summary:

  • Oki Pro6410 NeonColor | Network Guide - Page 1
    Pro6410 NeonColor Network Guide
  • Oki Pro6410 NeonColor | Network Guide - Page 2
    and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. drivers and manuals are available from: http://www.oki.com/printing/ Copyright © 2015. All rights reserved. OKI is a registered trademark of Oki Electric Industry
  • Oki Pro6410 NeonColor | Network Guide - Page 3
    printer 15 Using the Oki Driver Installer 15 Using the Add Printer Wizard 16 Mac OS X 17 Overview 17 Setting up a network printer Settings 18 Quitting Network Card Setup 18 Connecting to your printer 19 Mac OSX 19 Troubleshooting 21 TCP/IP 21 Computer cannot find the network interface
  • Oki Pro6410 NeonColor | Network Guide - Page 4
    NOTES, CAUTIONS AND WARNINGS NOTE A note provides additional information to supplement the main text. CAUTION! A caution provides additional information which, if ignored, may result in equipment malfunction or damage. WARNING! A warning provides additional information which, if ignored, may result
  • Oki Pro6410 NeonColor | Network Guide - Page 5
    those frame types automatically. Also, the interface supports major protocols such as TCP/IP, IPX/SPX (NetWare) and NetBEUI. This guide details the network interface specification and several software utilities. You should set the emulation in the printer menu settings to Auto or PS before printing
  • Oki Pro6410 NeonColor | Network Guide - Page 6
    over IPX/SPX (up to eight print servers) Encrypted password supported in print server mode EtherTalk NetBEUI NetBIOS, WINS SSL/TLS IPSec Self-diagnostic test printing Banner supported Monitoring and configuration by Web browser Printer status notification by E-Mail NOTE Not all utilities, features
  • Oki Pro6410 NeonColor | Network Guide - Page 7
    address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. Configure the NIC and printer by using a Web browser such as Microsoft Internet - 10.11 Microsoft Internet Explorer or similar. Operating system that supports Web browser. Third-party vendor developed TELNET client package. Third-
  • Oki Pro6410 NeonColor | Network Guide - Page 8
    password is case sensitive. 6. Click OK on the confirmation window. The new settings are enabled when the printer restarts. During the restart, the printer status icon changes to red. The printer will restart, the new settings will become active, and the status icon will turn green. CONFIGURING WEB
  • Oki Pro6410 NeonColor | Network Guide - Page 9
    , and reenter it for confirmation. The password is case sensitive. 6. Click OK on the confirmation window. CHANGING THE ENVIRONMENT You can configure the printer search conditions, time-out value for each setting, and items to be displayed on the list. 1. Launch Network Card Setup. 2. Select your
  • Oki Pro6410 NeonColor | Network Guide - Page 10
    /TELNET. To change the password, select Password Configuration in the Maintenance tab and follow the on-screen instructions. ADJUSTING PRINTER SETTINGS The network addresses used in this manual are shown as examples only. Network addresses used in your installation must be generated from your own
  • Oki Pro6410 NeonColor | Network Guide - Page 11
    IP address 172.168.20.127: ping 172.168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network interface card settings to the
  • Oki Pro6410 NeonColor | Network Guide - Page 12
    4. When the configuration is complete, select Exit Setup to save your change. To exit without saving your modification, select Quit. 5. Turn the machine off and on again. NOTE The network card continues to use pre-transmission settings until the machine is turned off and back on again. Network
  • Oki Pro6410 NeonColor | Network Guide - Page 13
    connected to the network via TCP/IP. The utility is for those Oki printers which support TCP/IP and redirects printing data to the lpr port of the specified IP address. It is an alternative method of connecting printers instead of using the Microsoft TCP/IP port. SYSTEM REQUIREMENTS Operating
  • Oki Pro6410 NeonColor | Network Guide - Page 14
    printer driver, see the Printing Guide. 2. Insert the DVD-ROM into the DVD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click setup.exe on the DVD-ROM. 3. Select Network Software. 4. Select Install LPR. 5. Follow the on-screen instructions to launch Oki LPR Utility
  • Oki Pro6410 NeonColor | Network Guide - Page 15
    check with your support website for latest information. INSTALLING A NETWORK PRINTER There are two ways to set up a Network Printer: > Install automatically, using the Oki Driver Installer > Install it yourself using the Add Printer Wizard USING THE OKI DRIVER INSTALLER The Oki Driver Installer
  • Oki Pro6410 NeonColor | Network Guide - Page 16
    must run the TCP/IP protocol in order to print. Can be configured to use either LPR or RAW (e.g. Port9100). OkiLPR Used to connect your printer over TCP/IP using an LPR port. OkiLPR also includes useful tools enabling you to download PS and PRN files directly to your
  • Oki Pro6410 NeonColor | Network Guide - Page 17
    driver that is built in to the OS X. Features provided by the PPD file include: > Supported paper types > Paper trays > Printer resolution > Printer color matching NOTE The PPD file must be installed using the Oki Driver Installer to ensure that all essential files are copied. SETTING UP A NETWORK
  • Oki Pro6410 NeonColor | Network Guide - Page 18
    4. Click OK on the confirmation window. Opening a Web page 1. Launch Network Card Setup. 2. Select the printer. 3. Select View Web Page from the Printer menu. The web page will start, and the printer status page will be displayed. QUITTING NETWORK CARD SETUP 1. Select Exit from the File menu. Mac OS
  • Oki Pro6410 NeonColor | Network Guide - Page 19
    If you have not already done so, run the Oki software installer before following the steps below. MAC OSX USB 1. Choose Apple Menu > System Preferences > Print & Fax. 2. If the printer is already in the list of printers, click "-" to remove it. NOTE This is necessary as Leopard may not be using
  • Oki Pro6410 NeonColor | Network Guide - Page 20
    to "Configuration settings" on page 6. 6. Check the correct PPD file for your printer is selected in the Print Using menu. 7. Click Add. 8. You will be prompted to configure any additional printer hardware options. If your printer has options such as a storage device or second tray, switch on the
  • Oki Pro6410 NeonColor | Network Guide - Page 21
    TROUBLESHOOTING The network addresses used in this manual are shown for example only. Network addresses used in your installation must be generated from your own network. TCP/IP COMPUTER CANNOT FIND THE NETWORK INTERFACE CARD Turn the printer off for 15 seconds and then on again. Confirm the network
  • Oki Pro6410 NeonColor | Network Guide - Page 22
    WEB BROWSER To prevent your web browser caching the printer web pages, carry out the following steps as appropriate for your web browser. MICROSOFT INTERNET EXPLORER (always use cached page) > 3 (default): Check when the page is out of date (automatically determined) 5. Click OK. Troubleshooting > 22
  • Oki Pro6410 NeonColor | Network Guide - Page 23
    4-11-22 Shibaura, Minato-ku,Tokyo 108-8551, Japan www.oki.com/printing/ March 2017 46225302EE Rev2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
Network Guide
Pro6410 NeonColor