Oki C110 C110 User Guide (English) - Page 100
Contact Technical Support with
View all Oki C110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Symptom Cause Solution Not all pages The Cancel key was print. pressed. Make sure no one pressed the Cancel key while your job was printing. The tray is empty. Check that the trays are loaded with media, in place, and secure. A document is printed with an Print the overlay file using a suitable overlay file which has been printer driver. created by an unsuitable printer driver. Printer resets or turns off frequently. The power cord is not correctly plugged into the outlet. A system error occurred. Turn off the printer, confirm that the power cord is correctly plugged into the outlet, and then turn on the printer. Contact Technical Support with the error information. With N-up on Both the driver and the For N-up on multiple prints, choose multiple application have been set for Collate only in the driver's Basic Tab. prints, the collation. Do not set collation in the application. output is incorrect. You hear unusual noises. The printer is not level. There is a foreign object stuck inside the printer. Put the printer on a flat, hard, level surface. Turn off the printer and remove the object. If you cannot remove it, contact Technical Support. Media is wrinkled. The media is moist from humidity or having water spilled on it. Remove the moist media and replace it with new, dry media. The media feed roller or fuser Check them for damage. If necessary, unit is defective. contact Technical Support with the error information. Unsupported media (wrong See "Print Media" on page 30 size, thickness, type, etc.) is being used. 100 - C110 User's Guide