Oki C110 C110 User Guide (English) - Page 99
Solving Other Problems
View all Oki C110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Solving Other Problems Symptom Cause Solution Printer The power cord is not power is not correctly plugged into the on. outlet. Turn off the printer, confirm that the power cord is correctly plugged into the outlet, and then turn on the printer. Something is wrong with the Plug another electrical appliance into outlet connected to the the outlet and see whether it operates printer. properly. The power switch is not correctly turned on (I position). Turn the power switch off (O position), then turn it back to the on (I position). The printer is connected to an outlet with a voltage or frequency that does not match the printer specifications. Use a power source with the specifications listed in appendix A, "Technical Specifications." Printing takes too much time. The printer is set to a slow printing mode (for example, thick stock). It takes more time to print with special media. When using regular paper, make sure that the media type is set properly in the driver. The printer is set to power It takes time for printing to start in saving mode. power saving mode. The job is very complex. Wait. No action needed. A toner cartridge for a Install a genuine Oki toner cartridge different region or an approved for your specific printer. unapproved toner cartridge is installed. Blank pages One or more of the toner are printed. cartridges are defective or empty. Check the toner cartridges. The image will not print correctly or not at all, if the cartridges are empty. The wrong media is being used. Check that the media type set in the driver matches the media loaded in the printer. 99 - C110 User's Guide