Oki C5650n C5650n/C5650dn User's Guide - Page 116
Shading on unprinted s, Toner rubs off when you rub the printed surface
View all Oki C5650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Shading on unprinted sections Possible cause Paper has been affected by static electricity. Paper is too thick. Toner is low. Remedy Store paper within specified temperature and humidity levels. See "Specifications" on page 106. Use recommended paper. See "Paper Weights" on page 14. Replace toner cartridge. See "Replace a Toner Cartridge" on page 54. Toner rubs off when you rub the printed surface. Possible cause Remedy Media Weight and Media Type settings may not be appropriate. Set the value of media weight in the menu to the next heaviest one (MEDIA MENU → YYY MEDIA WEIGHT). Packing materials were left on the fuser when it was installed. Careful! Fuser my be HOT! Open the top cover and check to be sure that all the packing materials were removed from the fuser. See "Replace the Fuser" on page 71. C5650n/C5650dn User's Guide Print Quality Problems • 116