Oki ML420n OkiLAN 6130 Network Card Installation Guide - Page 8

Installing Your Driver - okidata

Get Oki ML420n PDF manuals and user guides View all Oki ML420n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Installing Your Driver From the CD or OKI Data website - follow the installation instructions. Entering the Printer IP Address While installing the printer driver for TCP/IP using the CD supplied with your printer. When you come to the screen requesting the IP Address for the printer, you must select "IP Address" (instead of the default "Search address") and type in the printer's IP Address before clicking Next. If you need help, please contact your Network Administrator for the IP Address to use. LPR Make sure there are no error conditions in the printer (e.g., paper jam) before you use LPR to discover the printer. The product driver utility is available from OKI Data's website at http://www.okidata.com Resetting to Factory Defaults 1. Turn off the printer. 2. Turn on the printer and wait for the print server to boot up (about 30 seconds). 3. Press and hold the Test button on the front of the OkiLAN 6130 for 20 seconds. The lights will flash briefly after releasing the button, then the card will reset. Note: Your printer may look like either example below. OR 4. Release the TEST button. The print server resets to the factory default settings and reboots. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
8
Installing Your Driver
From the CD or OKI Data website - follow the installation instructions.
Entering the Printer IP Address
While installing the printer driver for TCP/IP using the CD supplied with your printer.
When you come to the screen requesting the IP Address for the printer, you must select “IP Address”
(instead of the default “Search address”) and type in the printer’s IP Address before clicking Next. If you
need help, please contact your Network Administrator for the IP Address to use.
LPR
Make sure there are no error conditions in the printer (e.g., paper jam) before you use LPR to discover
the printer. The product driver utility is available from OKI Data’s website at
Resetting to Factory Defaults
1. Turn off the printer.
2. Turn on the printer and wait for the print server to boot up (about 30 seconds).
3. Press and hold the Test button on the front of the OkiLAN 6130 for 20 seconds. The lights will flash
briefly after releasing the button, then the card will reset.
4. Release the TEST button.
The print server resets to the factory default settings and reboots.
OR
Note:
Your printer may look like either example below.