Olympus D-490 D-490 Zoom Instruction Manual (2.6 MB)

Olympus D-490 - 2.1MP Digital Camera Manual

Get Olympus D-490 - 2.1MP Digital Camera PDF manuals and user guides
UPC - 050332130517
View all Olympus D-490 manuals
Add to My Manuals
Save this manual to your list of manuals

Olympus D-490 manual content summary:

  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 1
    Digital Camera D-490ZOOM Operating Instructions • Before you use this camera, read this manual and then store it in a safe location where you can find it for future use. • We recommend that you spend some time taking test shots
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 2
    to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed serial cable should be used to connect the camera to a personal computer (PC). Declaration of Conformity Model Number: D-490ZOOM Trade Name: OLYMPUS Responsible party: Olympus
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 3
    Olympus digital camera. Before you use your new camera, read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual safety, and to avoid damaging the product, use only accessories recommended by Olympus. 7 Water and Moisture - Never use this product
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 4
    outlet and disconnect it from the camera when the camera is not in use. 13 Important Safety Instructions (continued) 16 Damage Requiring Service - While parts could cause a fire, electrical shock, or create other hazards. 18 Safety Check - Upon completion of servicing or repairs, ask the service
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 5
    Olympus NiMH batteries and the recharging unit recommended for use with these batteries. 2 Never load batteries with their +/- terminals reversed. Never force batteries into the battery compartment. 3 To prevent causing battery leaks or damaging their terminals, carefully follow all instructions
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 6
    CAUTION 1 Olympus NiMH batteries are intended for use only with Olympus digital cameras. Never use these batteries with any other device. 2 Never subject batteries to strong shocks or continuous vibration. 3 Never mix batteries (old and new batteries, charged and uncharged batteries, batteries of
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 7
    Important Safety Instructions (continued) NOTE Selecting Batteries for Your Camera • This camera can use four AA NiMH batteries, four AA Alkaline batteries, four AA lithium batteries, four AA NiCd batteries, or two CRV3 lithium battery packs. Use of Olympus brand batteries is strongly recommended
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 8
    Contents Main Features 17 Using this Manual 18 Chapter 1 Getting Started 20 Checking the Contents 20 Names of Parts 21 Attaching the Strap 25 Inserting the Batteries 26 Using the AC Adapter (sold separately 29 Inserting the SmartMedia Card 30 Setting the Date and Time 31 Adjusting the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 9
    Olympus CAMEDIA digital camera produces the best picture quality in its class. • The 3x zoom lens together with the 2.5 digital telephoto mode offers an impressive 7.5x maximum zoom. • Olympus high-recording mode lens equals those found on single lens reflex cameras. • The removable SmartMedia card
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 10
    cards can be printed either on DPOF (Digital Print Order Form) printers or in conventional photo laboratories. Pre-selecting images in the camera and introduces the main features of the CAMEDIA Master 2.0. Appendix You will also find a troubleshooting guide and explanations of the key technical
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 11
    ) Conversion connector for Macintosh CR-V3 lithium battery pack (2 packs) Software CD Index lables (2 pieces) Made in Japan Made in Japan Instructions / Warranty agreement 20 Names of Parts Camera 12 3 4 5 1 Getting Started 76 8 9 0 BA 1 Zoom lever (p.44) 2 Shutter release button (p.40
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 12
    (p.70) / Print button (p.117) F Macro / Digital telephoto button (p.68/69) Write-protect button (p.55) Battery compartment cover (bottom) (p.26) N Tripod socket (bottom) 22 Viewfinder 12 3 Control Panel 12 Names of Parts (p.41) = Battery check (p.36) A Card error (p.136) / Card function (p.91)
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 13
    focus (p.61) 4 Flash (p.63) 5 Self-timer (p.70) 6 Remaining picture count (p.37) 7 Memory gauge (p.42) 8 Frame number (p.107) 9 Time (p.31) 0 Date (p.31) A Battery check (p.36) Attaching the Strap 1 1 Attach the strap to the camera. CAUTION • Attach the strap exactly as shown in the diagram. If the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 14
    lift it up to open. 3 Insert the batteries as shown in the diagram. Using AA (R6) alkaline batteries • When using the lithium battery packs, insert them so the "CAMEDIA" label on each battery is facing the lens side of the camera. 4 With the battery compartment cover closed, press the tab and
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 15
    see or smell smoke, unplug it immediately and discontinue use. Contact your Olympus dealer or an authorized Olympus service center for assistance. • Do not use any adapter other than the Olympus adapter. Using a different adapter can damage the camera or the power source, or cause other malfunctions
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 16
    . • When using non-Olympus brand cards, formatting in the camera is recommended (p.111~112). 4 Close the card compartment cover so it clicks into place. CAUTION • Never open the card cover, eject the card, remove the batteries, or disconnect the AC adapter while the camera power is turned on
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 17
    Setting the Date and Time (continued) 7 5,6 Monitor (Date setting screen) 1. 1. '00 0 : 00 5 Press the arrow pad ̅ or ̃ to set the first number, then press ୴. • The indication moves to second date value. 6 Repeat the process until the date and time are set. • The year 2000 is displayed as "00". 7
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 18
    the card or batteries, or disconnect the AC adapter while the camera is in operation as this could result in damage to the data stored on the card. 34 Checking the Control Panel Is the SmartMedia card inserted? If you forget to insert the card, or if there is any other problem with the card, the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 19
    has been turned on or after taking a picture. The frame number on the control panel may blink. This indicates that battery power is low. The camera will not work properly and the batteries should be replaced. Does the Card Have Enough Room for More Pictures? When the power is turned on with the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 20
    particular shot: Viewfinder Advantage: You can check the proper subject composition with less camera movement. Disadvantage: Close-up photography causes inconsistencies between the picture frame as seen Disadvantage: It is more difficult to hold the camera steady, and battery life is decreased. 39
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 21
    batteries or card, or disconnect the AC adapter while the green lamp and write mark are blinking. This could damage the pictures you have already taken, as well as the one currently being written to the card. HELP the beep function off (p.98), the camera will not beep after taking a picture.
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 22
    Memory gauge Shoot Shoot Memory gauge 42 Before shooting Wait Wait Writing to card Cannot shoot Taking Still Photos (continued) HELP • Taking pictures using the monitor takes more time to write to the card the actual photo and do not indicate a camera malfunction. • The picture frame of the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 23
    is full-pressed. NOTE • You can take pictures of up to 7.5x using the digital telephoto mode function (p.69). 44 Flash working range The flash working range is adjusted by using the zoom lever. Wide-angle mode: Approx. 8″ ~ 13″ Telephoto mode: Approx. 8″ ~ 8.5″ Within an approximate range of
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 24
    camera in shooting mode (the lens barrier open), quickly press the monitor button twice. • The camera switches to playback mode and the monitor displays the most recent photo taken. • If no photos have been recorded on the card lens will recess into the 2 camera. 3 Wait until the lens fully
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 25
    if no pictures have been taken. Any problems with the card are indicated on the monitor (p.55). • The battery check mark blinks when the batteries are running low. Standby mode If the camera is left untouched for three minutes when using the batteries, it automatically turns off. It is strongly
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 26
    setting and type of the image. • The battery level, record mode marks and others go off simultaneously displays several images stored on the card. This is useful when searching for a monitor displays the most last image taken. 2 Push the zoom lever toward (Wide angle). 3 Playing Images Back 3
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 27
    to the left. ୴: To select the frame to the right. 5 Pull the zoom lever toward (Telephoto). • The monitor displays the full- sized version of the 1 With the lens barrier closed, press the monitor button. • The camera turns on in playback mode. The monitor displays the last image taken.
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 28
    . 2 2 Connect the video cable by 4 inserting one end into the video output terminal on the camera and the other end into the input terminal on the television. 3 Turn on the television, and 5 3 set to "video input." • Refer to your television instructions manual for further information
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 29
    card.) 31 1 With the lens barrier closed, press the monitor button. • The camera card at once (p.110). CAUTION • Never open the card compartment cover, eject the card, remove the batteries, or disconnect the AC adapter while erasing pictures. Doing so may destroy the image data on the card. HELP
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 30
    (pulling the zoom lever towards T) makes this discrepancy even larger. When shooting close-ups, you can determine the exact picture area by viewing the monitor. However, it is more difficult to hold the camera steady using the monitor, which may result in blurry images. The batteries will also drain
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 31
    autofocus. This feature disables autofocusing and lets you set the focus to either "Close" (8 ft) or "Distant" (∞). 2,3 1 Open the lens barrier. • The camera turns on in shooting mode. 2 Half-press the shutter release button while pressing the arrow pad as described below. 4 • Be sure to keep
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 32
    will not operate when shooting movie pictures (p.88). Also, the working range of the flash changes when you operate the zoom lever. When the power is turned on, the camera is automatically set to autoflash mode. Use the flash mode button to select different flash types. Flash mode button Control
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 33
    off, go to the shooting menu and change the settings to HOLD (p.99). HELP • While the orange lamp next to the optical viewfinder is blinking, the subject does not watch the pre-flashes. • The subject is too far from the camera. • The subject's eyes do not respond to the pre-flashes due to individual
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 34
    same time. The shutter speed automatically slows down to 1/2 second in low-light conditions. The use of a tripod is recommended to prevent blurriness caused by camera movement. 66 Off (Flash Override) Using the Flash (continued) When you do not want the flash to fire even in the dark, close the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 35
    camera at your subject and full-press the shutter release button. Control panel Macro mark To cancel the macro mode Turning the power off or switching to digital telephoto mode will turn the macro mode off (p.69). HELP optical zoom (p.44). If you take the picture with the camera set for Digital
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 36
    when the photographer wants to be in the picture. Using a tripod is highly recommended. Self-timer signal lamp 1 Secure the camera on the tripod. 2 Open the lens barrier. • The camera turns on in shooting mode. 3 Press the self-timer button. 2 34 • The self-timer mark will be displayed on the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 37
    88 movie pictures Card Shooting panorama shots. Also for using functions Special Function SmartMedia cards (sold 91 separately changed. ̅ The setting remains in the camera memory only when setting in the shooting menu is set to HOLD. Removing the batteries, however, will cause the setting to
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 38
    Using the Shooting Menu 1 This is the first of two pages Slide the lens barrier open until it clicks. 3 [1 / 2 ] • This turns power on in shooting mode. [0 ] [ ESP ] [ HQ ] WB [AUTO] ISO [ AUTO] [ ] 2 Press the Menu button. • The shooting menu will be displayed on the monitor. At this
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 39
    Compensation) In addition to automatic exposure, you can also adjust it manually by +/- 2 (approx. 1/3 stops). Adjust + to increase To hold a setting in the camera memory after turning off the power, go to the settings in the shooting menu and select HOLD (p.99). HELP • When you change the setting,
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 40
    Spot Metering (Placing Priority on Screen Center Brightness) If a shot is backlit, ordinary photometric settings (digital ESP metering) will make the subject appear too dark. To compensate for this, switch the camera over to the spot metering mode in the shooting menu. This feature is used to
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 41
    losing the image, never open the card cover, remove the card, remove the batteries, or disconnect the AC adapter while the write mark is blinking. If you select a high resolution setting with insufficient storage space on the memory card, you will see the card warning mark in the upper right corner
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 42
    White Balance (Adjusting the Tone) This camera uses auto white balance to shoot the subject in a naturallooking Settings return to the default when the power is turned off. When the power is turned off the camera will return to the "AUTO" mode. To retain the setting even when power is turned off, go
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 43
    ISO Light Sensitivity Level (Setting ISO Sensitivity) This camera can automatically determine the ISO sensitivity level based on the brightness of the subject. However, for certain kinds of pictures it is better to set the ISO sensitivity level manually. For details about how to use the menu, see "
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 44
    when the power is turned off. When the power is turned off, the camera will return to the "SINGLE" setting. Record mode for sequential shooting Setting to prevent losing the image, never open the card compartment cover, remove the card, remove the batteries, or disconnect the AC adapter while the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 45
    and then release the button. • The camera starts shooting when the button is pressed. The memory gauge and remaining second count appear; next to the viewfinder blinks to indicate the images are being written to the card. 4 After the green lamp goes off, continue shooting by repeating steps 2
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 46
    off. When the power is turned off, the camera will return to the "Still Picture" mode. HELP • Movie picture quality may be grainier than CAMEDIA Master 2.0 utility software to combine the images into a single panoramic shot. The panorama assembly function works only with Olympus-brand standard cards
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 47
    software utility, CAMEDIA MASTER 2.0. • Panorama assembly cannot be performed with the camera power is turned off while using a card function, the camera 5 will return to the shooting mode number of panoramic shots can cause insufficient memory problems when assembling the shots on a computer.
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 48
    Sharpness (Avoiding Sharp Silhouettes) Under ordinary shooting conditions, the subject's silhouette will be shot in a sharp, clearly-defined manner. Ordinarily, this is fine. However, when processing images on a computer, there may be times when a sharp silhouette on an image is not desirable. In
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 49
    processed on a computer. This setting remains in memory even after the power is turned off. For numbers as follows. The camera automatically assigns file and folder numbers. DCIM , Card folder *** OLYMP , Subfolder same folder via the copy overwrite function. HELP • When you have reached the maximum
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 50
    the "Red-eye Reduction Flash" remains in the memory; the other settings are cancelled (p.64). HOLD: Among the settings on p.72, items marked with ć and ̅ can be retained in the memory. All flash settings are held in memory (p.64). However, if the batteries are removed, all ̅ settings return to the
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 51
    Card Function ; ** N/A (no account) - Card Memory" box are designated as follows: 6 ć The setting remains until it is changed. - The setting will return to the default setting when the power is turned off. CAUTION • If the batteries are removed and left out of the camera, or if the batteries
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 52
    Using the Playback Menu 1 With the lens barrier closed, push the monitor button. • The power turns on in playback mode and the monitor displays the last image taken. 2 Press the Menu button. • The playback menu will be displayed on the monitor. 21 3 Press the arrow pad ̅ or ̃ to select [menu
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 53
    and after a few moments the image will begin to move. Operations during playback 1 Press the OK button to pause 4 the playback. 1,3 2 2 While the camera is on pause, the following operations are possible: ̅ : Returns to the beginning of the movie picture. ̃ : Advances to the end of the movie
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 54
    automatically played back in order. This is useful for reviewing images in sequence. For details about how to use If the camera is left untouched for 30 minutes when using the batteries, it starts from when the power is turned on) • The card image number is displayed. • When an image is erased,
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 55
    of a Movie Picture (Function) When shooting movie pictures, in order to avoid errors it is often helpful to shoot a few extra frames at the beginning and end of a shot (p.90). These unneeded frames playback menu. NOTE • Movie pictures taken with other digital cameras may not be edited out. 109
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 56
    a reduced number of storable pictures. To solve this problem, reformat such cards with the camera. The use of pre-formatted Olympus brand cards is highly recommended. When a card that needs to be formatted is inserted into the camera, the card warning symbol will illuminate on the control panel and
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 57
    formatting has been started, it can not be cancelled part way through. • Never open the card compartment cover, disconnect the AC adapter, remove the batteries or remove the card while erasing, as doing so could damage the data on the card. 112 To Change the Catalog Frame Number (Index Display
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 58
    To Adjust Monitor Brightness (Monitor Adjustment) The brightness of the monitor can be adjusted. This setting remains in the camera memory even after the power is turned off. For details about how to use the menu, see "Using the Playback Menu" (p.102). Item to select in
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 59
    : • Software and computer connection cable • FlashPath Floppy disk adapter (sold separately) • PC card adapter (sold separately) • USB SmartMedia reader/writer (sold separately) Read these instructions manuals for further information. The Digital Print Order Format (DPOF) Your camera records photos
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 60
    on Your Photos (continued) HELP • Make sure the date and time are set correctly on the camera before using this feature. • This function does not work with the P-330N/P-330 Olympus digital camera photo printer. Use the screen. 4 When needed, you can display the index by pushing the zoom lever. 119
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 61
    ), is a DPOF-compatible printer. Print your pictures by inserting a card set with print reserve commands (p.119) into the Olympus Photo Printer. See the Olympus P-330N/P-330 Photo Printer for Digital cameras instruction manual for further information. Main features of P-330N/ P-330 Print Single
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 62
    downloading, display, storage and panorama assembly, install the CAMEDIA Master software application from the included CD-ROM. Transferring Picture Data to a Computer Picture data stored on a SmartMedia card that have a USB port. See the SmartMedia reader/writer instruction manual for details.
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 63
    hard disk space : at least 30MB Memory : at least 32MB *Serial port : Printer port or modem port Monitor CAMEDIA Master online instructions. 124 2 Make sure the power on both the computer and the camera is turned off before connecting. 3 Attach the provided RS-232C PC serial cable to the serial
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 64
    port Computer connector Conversion connector for Macintosh RS-232C PC serial cable 126 Loading Images with CAMEDIA Master 2.0 Using CAMEDIA Master 2.0 you can check camera images on the computer and then download them. 1 Start up CAMEDIA Master 2.0 on your computer. 2 Locate and click the "My
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 65
    Master 2.0: Introduction This software can be used to download, process, and save load images. The instructions are located in the CAMEDIA Master folder on your computer. For details, see the CAMEDIA Master 2.0 online instructions. Making Dark Images Brighter Some images may come out darker than
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 66
    be set either from the camera or using the CAMEDIA Master 2.0. The set date will be cancelled approximately 1 hour after the batteries are removed from the camera. Q Can I use a filter or a hood with this camera? A Such accessories cannot be connected to the camera. Q Can I use an extension flash
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 67
    Troubleshooting (Check before Taking in for Repair) Operating Problems The camera does not work • The power is off. § Open the lens barrier and turn on the power. • The batteries are loaded incorrectly. § Reload the batteries correctly. • The batteries are dead. § Replace with new batteries. • The
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 68
    Problems The picture is out of focus • The camera was jarred when the shutter release button was pressed. § Hold the camera , especially in dim light. 134 Troubleshooting (continued) The colors of pictures taken lens was partly blocked by a finger or the strap. § Hold the camera correctly, keeping
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 69
    the control panel blink to alert you to various problems. Warning Monitor Display NO CARD The card is not being recognized. Error There is no card in the camera, or the card is not inserted correctly. Remedy Insert or remove and reinsert the card. CARD FULL Number of storable pictures is 0. The
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 70
    Optional Items • Photo Printers For Olympus Digital Cameras • AC Adapter • Camera Case • Standard SmartMedia Card (8/16/32/64MB) • FlashPath Floppy Disk Adapter • PC Card Adapter • NiMH Batteries • NiMH Battery Charger • USB SmartMedia Reader/Writer As of June 2000 Notes on Display and Backlight •
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 71
    Playback 106 B Backlighting, backlit 64, 134 Battery(-ies 8, 26, 130 Beep Sound 98 C CAMEDIA Master .........91, 127, 128 Card 30, 110, 111, 116 Card Functuon 91 Close-ups 53 Computer 94, 96, 122, 133 Control panel 23 D Digital ESP 78 Digital Telephoto Mode 69 Diopter adjustment 33 DPOF
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 72
    SmartMedia 30 SOFT 94 Spot Metering Mode 78 T Telephoto 44, 45, 69 W Warning Sound(s 98 White Balance 82, 135 Wide angle (wide-angle).........44, 45 Z Zoom 45, 69 142 143 Appendix
  • Olympus D-490 | D-490 Zoom Instruction Manual (2.6 MB) - Page 73
    . 631-844-5000 (Customer support) Tel. 1-888-553-4448 www.olympusamerica.com [email protected] OLYMPUS OPTICAL CO. (EUROPA) GMBH OLYMPUS OPTICAL CO. (U.K.) LTD. 2-8 Honduras Street, London EC1Y 0TX, United Kingdom, Tel. 0171-253-2772 Serial number / Numéro de série / Número de serie Digital camera
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Digital Camera
D-490ZOOM
Operating Instructions
• Before you use this camera, read this manual and then store it in a
safe location where you can find it for future use.
• We recommend that you spend some time taking test shots and
experimenting with all of the features before you take important
photographs.