Olympus MAUSB-300 Reference Manual

Olympus MAUSB-300 Manual

Get Olympus MAUSB-300 PDF manuals and user guides View all Olympus MAUSB-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Olympus MAUSB-300 manual content summary:

  • Olympus MAUSB-300 | Reference Manual - Page 1
    USB Read/Write Memory Adapter MAUSB-300 REFERENCE MANUAL
  • Olympus MAUSB-300 | Reference Manual - Page 2
    do not support USB 2.0. *2 Users running Windows 98/98SE need to install a device driver which is downloadable from the OLYMPUS web site. For customers in North and South America For customers in the USA Declaration of Conformity Model Number : MAUSB-300 Trade Name : OLYMPUS Responsible Party
  • Olympus MAUSB-300 | Reference Manual - Page 3
    ...3 What's included ...4 Names of parts ...4 Before getting started ...5 Windows 98/98SE How to install Operating the adapter 1. Turn on the computer 7 2. Download and install the device driver 7 1. Inserting a card 8 2. Connecting to the computer 9 3. Removing a card 11 4. Disconnecting the
  • Olympus MAUSB-300 | Reference Manual - Page 4
    What's included Make sure all the following items are included. If any items are missing, inform the shop from where you purchased the adapter right away. MAUSB-300 (Adapter and Cap) Start Guide Names of parts Cap USB connector Status lamp Adapter Card slot 4
  • Olympus MAUSB-300 | Reference Manual - Page 5
    , refer to the camera's instruction manual. If your camera does not recognize a card formatted on another device, re-format the card with your camera. (Cards formatted with non-DOS formatting systems are not recognized by the adapter.) ● The adapter does not support computer power-saving functions
  • Olympus MAUSB-300 | Reference Manual - Page 6
    on computer. Download device driver .*2 Install device driver.*2 Restart computer.*2 Connect to computer. Connect to computer. Get started!*3 *1 : Windows 3.1, Windows 95, Windows NT are not compatible. *2 : You only need to perform this procedure before using the adapter for the first time
  • Olympus MAUSB-300 | Reference Manual - Page 7
    system is configured. 1. Open the web site, then follow the instruction to download the device driver. MAUSB-300 Device Driver Web Site : http://www.olympus.com/ Notes DO NOT connect the adapter until installation of the device driver is completed. 2. When you double-click the file you downloaded
  • Olympus MAUSB-300 | Reference Manual - Page 8
    device driver is now installed. Once the device driver has been installed, the adapter instructions in "2 Download and install the device driver" (੬ p. 7). Operating the adapter The operating procedures for the adapter way into the card slot. Status lamp Adapter Card slot Notes • Make sure that
  • Olympus MAUSB-300 | Reference Manual - Page 9
    adapter's connector to the USB port on the computer. (You can plug in the USB connector while the computer is in use.) Notes ● Be sure to connect the adapter to the computer AFTER installing the device driver out of the card slot or unplug the adapter from the computer while the status lamp is
  • Olympus MAUSB-300 | Reference Manual - Page 10
    the adapter is connected to the computer with no card in it, the status lamp does not light, but the adapter is ]. Notes The drive letter assigned to the adapter by your computer may differ depending on how the connection. Before connecting After connecting Adapter In this example, the Removable
  • Olympus MAUSB-300 | Reference Manual - Page 11
    data on the card may be damaged. ● DO NOT apply force to the computer's USB port or the adapter when removing/inserting a card from/into the adapter if it is directly connected to the computer's USB port. 1. Double-click [My Computer] on the desktop. 2. Right-click the corresponding [Removable Disk
  • Olympus MAUSB-300 | Reference Manual - Page 12
    Insert a card into the adapter and connect it to the computer's USB port. 2. Double-click [ instruction manual. If your camera does not recognize a card formatted on another device, re-format the card with your camera. (Cards formatted with non-DOS formatting systems are not recognized by the adapter
  • Olympus MAUSB-300 | Reference Manual - Page 13
    adapter, also refer to your computer's user manual and the manuals for any optional devices you are using. 1 Turn on the computer Turn on the computer's power (and connected devices the way into the card slot. Status lamp Adapter Card slot Notes • Make sure that the card
  • Olympus MAUSB-300 | Reference Manual - Page 14
    insert the card again. If the problem persists, the card may be damaged. When connecting the adapter to your computer for the first time If you are using a version of Windows XP equipped with a USB 1.1 compliant port, the following message appears when the adapter is connected to your computer for
  • Olympus MAUSB-300 | Reference Manual - Page 15
    the adapter is connected to the computer with no card in it, the status lamp does not light, but the adapter is ]. Notes The drive letter assigned to the adapter by your computer may differ depending on how the connection. Before connecting After connecting Adapter In this example, the Removable
  • Olympus MAUSB-300 | Reference Manual - Page 16
    data on the card may be damaged. ● DO NOT apply force to the computer's USB port or the adapter when removing/inserting a card from/into the adapter if it is directly connected to the computer's USB port. 1. Double-click [My Computer] on the desktop. 2. Right-click the corresponding [Removable Disk
  • Olympus MAUSB-300 | Reference Manual - Page 17
    software), then follow the steps below. 1. If a card is inserted in the adapter, follow steps 1 3 in "3 Removing the card". 2. Left-click the [Safely the computer you are using. 3. A message box titled [Safely remove USB Mass Storage Device - Drive (K:)] appears on the taskbar. Click on it. ● The
  • Olympus MAUSB-300 | Reference Manual - Page 18
    Insert a card into the adapter and connect it to the computer's USB port. 2. Double-click [ instruction manual. If your camera does not recognize a card formatted on another device, re-format the card with your camera. (Cards formatted with non-DOS formatting systems are not recognized by the adapter
  • Olympus MAUSB-300 | Reference Manual - Page 19
    Mac OS 9 How to install When you install the adapter, also refer to your computer's user manual and the manuals for any optional devices you are using. 1 Turn on the computer Turn on the computer's power (and connected devices, such as a monitor) to start Mac OS. Notes ● To
  • Olympus MAUSB-300 | Reference Manual - Page 20
    not light if the card is not recognized correctly. When this happens, pull the card out of the adapter, then wipe the contact area with a dry cloth, and insert the card again. If the problem persists, the card may be damaged. When the card is recognized correctly When the card is inserted
  • Olympus MAUSB-300 | Reference Manual - Page 21
    & drop the card's icon onto the Trash icon. 2. Make sure that the status lamp is NOT blinking. 3. Unplug the adapter from the computer's USB port. ● You can unplug the adapter with the computer's power on. (You do not need to turn off the computer, restart it, or put it in the sleep mode
  • Olympus MAUSB-300 | Reference Manual - Page 22
    Insert a card into the adapter and connect it to the computer's USB port. ● The status lamp instruction manual. If your camera does not recognize a card formatted on another device, re-format the card with your camera. (Cards formatted with non-DOS formatting systems are not recognized by the adapter
  • Olympus MAUSB-300 | Reference Manual - Page 23
    adapter, also refer to your computer's user manual and the manuals for any optional devices you are using. 1 Turn on the computer Turn on the computer's power (and connected devices all the way into the card slot. Status lamp Adapter Card slot Notes • Make sure that the card
  • Olympus MAUSB-300 | Reference Manual - Page 24
    not light if the card is not recognized correctly. When this happens, pull the card out of the adapter, then wipe the contact area with a dry cloth, and insert the card again. If the problem persists, the card may be damaged. When the card is recognized correctly When the card is inserted
  • Olympus MAUSB-300 | Reference Manual - Page 25
    & drop the card's icon onto the Trash icon. 2. Make sure that the status lamp is NOT blinking. 3. Unplug the adapter from the computer's USB port. ● You can unplug the adapter with the computer's power on. (You do not need to turn off the computer, restart it, or put it in the sleep mode
  • Olympus MAUSB-300 | Reference Manual - Page 26
    Insert a card into the adapter and connect it to the computer's USB port. ● The status lamp instruction manual. If your camera does not recognize a card formatted on another device, re-format the card with your camera. (Cards formatted with non-DOS formatting systems are not recognized by the adapter
  • Olympus MAUSB-300 | Reference Manual - Page 27
    when making this setting, referring to your - computer's instruction manual. Delete [? MAUSB-300], then unplug the adapter and install the device driver correctly, and connect the adapter again. 7 Insert the USB connector fully into the computer's USB port to ensure that it is firmly connected
  • Olympus MAUSB-300 | Reference Manual - Page 28
    Troubleshooting Windows PROBLEM The status lamp goes out after lighting. 7 CAUSE The card is not recognized correctly. You can read a card, but not write There is a problem with the card. 8 to it. SOLUTIONS Disconnect the adapter from the computer, pull the card out of the adapter, then wipe the
  • Olympus MAUSB-300 | Reference Manual - Page 29
    Professional • Windows XP • Mac OS 9.0 - 9.2.2 • Mac OS X (v10.1.2 or later) * Users running Windows 98/98SE need to install a device driver which is downloadable from the OLYMPUS web site. ● The specifications are subject to change without prior notice. ● For the latest information, visit the
  • Olympus MAUSB-300 | Reference Manual - Page 30
    or manage a peripheral device (printer, modem, digital camera, memory adapter, etc.). Without the proper driver installed, a peripheral device will not be recognized by the computer. A window that appears on the monitor when the computer requires user confirmation or instructions on what to do
  • Olympus MAUSB-300 | Reference Manual - Page 31
    , etc.). Thanks to its ease of use, many devices now come equipped with USB ports. USB Bus Power USB supplies power to devices via cable. The power source supplied by USB is called bus power. The adapter works by this USB bus power. USB Mass Storage A USB device such as a floppy disk or hard disk
  • Olympus MAUSB-300 | Reference Manual - Page 32
    VM015802
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
USB Read/Write Memory Adapter
REFERENCE MANUAL
MAUSB-300