Olympus SP-810UZ SP-810UZ Instruction Manual (English) - Page 27
Shooting 3D images - camera manual
View all Olympus SP-810UZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Shooting 3D images (W mode) In this mode, 3D images are shot for viewing on 3D-compatible display devices. Images shot in 3D mode cannot be displayed in 3D on this camera's monitor. 1 Set the shooting mode to W. 3D Photo 3D P AUTO To exit 3D shooting mode without saving an image, press the button. The [Image Size] (p. 34) is fixed to [0]. The zoom ratio is fixed. The focus, exposure and the white balance are fixed when the first image is taken. The flash is fixed to [$Flash Off]. 4 14M NORM MENU 2 Press G to go to the submenu. 3 Use HI to select [Auto] or [Manual] and then press the A button to set. Submenu 1 Auto Manual Description After shooting the first frame, overlap the subject with the image in the monitor. The next frame is taken automatically. After shooting the first frame, move the camera to overlap the subject with the image in the monitor. Then manually release the shutter. Depending on the subject or the situation (if the distance between the camera and subject is too short), the image may not look 3D. The 3D viewing angle varies depending on the subject, etc. The first shot image is displayed on the monitor lightly. Decide the position by referencing the image. EN 27