Olympus SP-810UZ SP-810UZ Instruction Manual (English) - Page 42

Menus for Other Camera Settings

Page 42 highlights

Menus for Other Camera Settings The default settings of the function are highlighted in . Erasing data completely [Memory Format]/[Format] r (Settings 1)  Memory Format/Format Before formatting, check that no important data is left in the internal memory or card. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Be sure to remove the card before formatting the internal memory. Submenu 2 Yes No Application Completely erases the image data in the internal memory or card (including protected images). Cancels formatting. Using an Eye-Fi card [Eye-Fi] r (Settings 1)  Eye-Fi Submenu 2 Off On Application Disable Eye-Fi communication. Enable Eye-Fi communication. When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully, and comply with the instructions. Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used. In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card from the camera, or set [Eye-fi] to [Off]. This camera does not support the Eye-Fi card's Endless mode. Copying images in the internal memory to the card [Backup] r (Settings 1)  Backup Submenu 2 Yes No Application Backs up image data in the internal memory to the card. Cancels the backup. 42 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77

42
EN
Menus for Other Camera Settings
Menus for Other Camera Settings
The default settings of the function are highlighted in
.
Using an Eye-Fi card [Eye-Fi]
Using an Eye-Fi card [Eye-Fi]
r
(Settings 1)
Eye-Fi
Submenu 2
Application
Off
Disable Eye-Fi communication.
On
Enable Eye-Fi communication.
When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Use the Eye-Fi card in compliance with the laws and
regulations of the country where the camera is used.
In locations such as on an airplane, where the Eye-Fi
communication is prohibited, remove the Eye-Fi card
from the camera, or set [Eye-
] to [Off].
This camera does not support the Eye-Fi card’s
Endless mode.
Erasing data completely
Erasing data completely
[Memory Format]/[Format]
[Memory Format]/[Format]
r
(Settings 1)
Memory Format/Format
Before formatting, check that no important data is left
in the internal memory or card.
Cards must be formatted with this camera before
rst use or after being used with other cameras or
computers.
Be sure to remove the card before formatting the
internal memory.
Submenu 2
Application
Yes
Completely erases the image data
in the internal memory or card
(including protected images).
No
Cancels formatting.
Copying images in the internal memory
Copying images in the internal memory
to the card [Backup]
to the card [Backup]
r
(Settings 1)
Backup
Submenu 2
Application
Yes
Backs up image data in the internal
memory to the card.
No
Cancels the backup.