Olympus STYLUS TOUGH-6020 STYLUS TOUGH-3000 Instruction Manual (English) - Page 50
Saving battery power between shots [POWER SAVE] - no connection error
UPC - 769118339999
View all Olympus STYLUS TOUGH-6020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
To operate images with the TV remote control 1 Set [HDMI CONTROL] to [ON], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 49) 3 First turn on the TV, and then turn on the camera. ● Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera. Saving battery power between shots [POWER SAVE] t (Settings 3) X POWER SAVE Submenu 2 OFF ON Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button. Displaying the current altitude/water depth (atmospheric/hydraulic pressure) [MANOMETER] (STYLUS TOUGH-8010/μ TOUGH-8010 only) t (Settings 3) X MANOMETER The readings may have a margin of error depending on meteorological conditions. Use the readings only for your reference. Submenu 2 MANOMETER m/ft Submenu 3 OFF ON CALIBRATE m ft Application Cancels the manometer display. Displays the current altitude/water depth (atmospheric/hydraulic pressure) in the shooting standby mode screen. (-10 m to 5,000 m) Proceed to the setting screen. See below. This displays in meters. This displays in feet. When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22.9 ft) is reached. 50 EN