Olympus STYLUS TOUGH-6020 STYLUS TOUGH-3000 Instruction Manual (English) - Page 51
Operating the camera by tapping the body [TAP CONTROL], To adjust the altitude/water depth display
UPC - 769118339999
View all Olympus STYLUS TOUGH-6020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
For information on using the menus, see "Using the Menu" (p. 4). To adjust the altitude/water depth display 1 Use FG to select the current altitude/water depth, and press the A button to set. CALIBRATE 1200 m BACK MENU SET OK Operating the camera by tapping the body [TAP CONTROL] (STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only) t (Settings 3) X TAP CONTROL Submenu 2 OFF ON CALIBRATE Application Cancels [TAP CONTROL]. [TAP CONTROL] is activated. Adjusts the tap strength and intervals between multiple taps on each side of the camera body. (top, left, right, & back) Operating during shooting mode (Example: Flash mode) 1 Tap the right or left side of the camera body once. Then tap the top side of the camera once. ● The flash mode selection screen is displayed. 2 Tap the right or left side of the camera body to select a function. 3 Tap the back of the camera body twice to confirm your selection. P FLASH AUTO 0.0 WB AUTO ISO AUTO 4 14M Tap the camera firmly using the pad of your finger. When the camera is stabilized on a tripod for example, tap control may not work properly. To prevent dropping the camera when using tap control, strap the camera to your wrist. Operating during playback mode When switched to playback mode by tapping the top of the camera body twice, the operations below can be used. Display next image: Tap the right side of the camera once. Display previous image: Tap the left side of the camera once. Fast forward and reverse: Tilt the camera to the right or the left. EN 51