Olympus VP-1 VP-1 User's Manual - Simplified Edition (English)
Olympus VP-1 - Data Projector - DLP Manual
 |
UPC - 050332147072
View all Olympus VP-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Olympus VP-1 manual content summary:
- Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 1
your purchase of the OLYMPUS VP-1 data projector. Please read the USER'S MANUAL (Simplified Edition) and the USER'S MANUAL (CDROM Edition) carefully and use the projector properly. After reading, please store in a safe place. IMPORTANT Digital Light Processing, DLP™, Digital Micromirror Device and - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 2
, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS DIGITAL TECHNICAL SUPPORT. WARNING TO PREVENT FIRE OR SHOCK, DO , if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 3
instructions Lamp Replacement • Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 1100 hours of usage, the lamp power cable from the unit and have the object removed by a qualified Olympus Digital Technical Support while the projector is on. - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 4
User's Manual (Simplified Edition) contains 2 types of reference pages Remote control (includes one button battery) [1] This controls the projector. Please remove the transportation insulation sheet at time of purchase. See Page E-9(S). Power cable (1.8 m / 5.9 feet) [1] This power cable supplies power - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 5
User's Manual (CD-ROM Edition) [1] User's Manual (Simplified Edition) [1] QRG (Quick Reference Guide) [1] Warranty Card (LIMITED WARRANTY) [1] Product Registration [1] Replacement Sheet (Priority Replacement Program) [1] Checking the Supplied Accessories Soft case (for projector/remote control and - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 6
SOURCE button [E-20(S)] AUDIO VIDEO POWER STATUS POWER SOURCE MENU MEQNUUICK AUTO POWER indicator [E-16,17,31,32(S)] MENU button [E-38(C)] AUTO button [E-21(S)] QUICK MENU button [E-24(S)] MEQNUIUCK AUTO STATUS POWER POWER SOURCE MENU Exhaust vents Speaker Remote control sensor [E-14 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 7
below.) AUDIO VIDEO POWER STATUS POWER SOURCE Ventilation slots MENU MEQNUUICK AUTO PC Ventilation slots AC IN connector [E-16(S)] Rear adjuster [E-19(S)] Front adjusters [E-19(S)] Lamp cover [E-37(S)] Built-in Security Slot This security slot supports the MicroSaver Security - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 8
of the Remote Control Parts VKSTN CANCEL HKSTN ZOOM ENTER MENU QUICK VIDEOASDIPGEITCTAS-LFVIRDEEEZOERGB AUTO MUTE POWER YCbCr YPbPr PIP OFF ON Infrared transmitter [E-14(C)] FREEZE button [E-23(S)] (Freezes moving pictures) MUTE button [E-23(S)] (Temporarily cancels the video and audio - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 9
and install a new button battery with (+) side facing upward in the battery holder. Purchase a CR2025 type battery for replacement. MnO2-LiCELCLR2302V5OL CR2025 3 Insert the battery holder into the remote control and push in until the battery holder closes with a "click" sound. MnO2-LiCELCLR2302V5OL - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 10
Use this information as a guide to find out about the screen size when the projector is placed at a certain location edge of the projection 120" 100" 80" 60" h1 Height from center of lens to bottom edge of the projection h2 40" 26" AUDIO VIDEO POWER STATUS POWER SOURCE MENU MEQNUUICK AUTO - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 11
) 26" 40" 60" 80" 100" 120" 150" 180" 200" Screen Size Width x Height (m) (feet) 0.53 ן0.40 1.74 ן1.31 0.81 ן0.61 2.66 ן2.00 1.22 ן0.91 4.00 ן2.99 1.63 ן1.22 5.35 ן4.00 2.03 ן1.52 6.66 ן4.99 2.44 ן1.83 8.00 ן6.00 3.05 ן2.29 10.00 ן7.51 3.66 ן2.74 12 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 12
AUDIO VIDEO PC Monitor output Personal computer DVI-D cable (Available as an option. Stock No. 205202) Note * Please see Page E-20(S) "Input Selection" for information about making input selections. * This projector uses a 29-pin DVI connector that supports the digital interface. Digital signal - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 13
projector and the equipment to be connected is switched off. * When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows startup. Please consult the instruction manual - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 14
Connections with Video and Audio Connectors Video Equipment with VIDEO Connectors * Make the connection to the VIDEO connector of the projector using a video cable. Video Equipment with S-VIDEO Connectors * Make the connection to the VIDEO connector of the projector using an S-video cable. Audio - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 15
* Make the connection to the projector's VIDEO connector using a component cable (which is available as an option). AUDIO VIDEO Component cable (Available as an option) (3.5 58 and PAL. * When the video connectors are Y,Pb,and Pr connectors, please contact Olympus Digital Technical Support. E-15 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 16
distance between the screen and the projector. 2 Connect the personal computer or video equipment to the projector 3 Connect the AC IN connector of the pro- jector and the power outlet using the supplied power cable. The POWER indicator will light amber, the cooling fan will rotate at low speed, and - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 17
is lit steadily in amber, then unplug the power cable. The POWER indicator will go off when the power cable is unplugged. Warning Do not disconnect the power cable while the POWER indicator is blinking in amber. Doing so could shorten the life of the lamp or lead to breakdown of the projector. E-17 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 18
the power of the connected equipment and make the adjustments with the video signal being input to the projector. projector not being perpendicular to the screen. Set the projector so that it is pointing straight toward the screen. (5) If the image shows keystone distortion, adjust using remote - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 19
of the lamp. (2) Lowering the projection image Lower the front adjusters using the operation described above. Raise the rear adjuster. Turn the left and right front adjusters to make fine adjustments. Adjust so that there is no shaking of the projector. AUDIO VIDEO POWER STATUS POWER SOURCE - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 20
the use of direct operation with the main unit or remote control buttons. For information about operation using the menu, projector switches to the selected source regardless of whether an input signal is present. MENU SOURCE AUTO QUICK MENU ON POWER FREEZE MUTE DIGITAL RGB VIDEO S-VIDEO - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 21
unit operation/Remote control operation: Press the AUTO button. (This will not function while the menu or the quick menu is displayed.) A press of the AUTO button starts the automatic adjustment. MENU SOURCE AUTO QUICK MENU ON POWER FREEZE MUTE DIGITAL RGB VIDEO S-VIDEO QUICK ASPECT - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 22
size Real Projects the input signal without pixel conversion Input Signal Auto The setting is higher than the display resolution of the projector. DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ASPECT AUTO MENU Direct CANCEL Real The setting is lower than the display resolution of the - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 23
to off. * To change the display position of the sub-picture, see "Picture in Picture" on Page E-54(C). ON POWER OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ASPECT AUTO Freezing a Moving Picture This function is used to stop and view a moving picture. Note that the - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 24
the absence of operations for a period of about 10 seconds, the display will close automatically. Remote control operation (1) A press of the QUICK CANCEL button. In the absence of operations for a period of about 10 seconds, the display will close automatically. (2) MENU SOURCE AUTO (1) QUICK - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 25
. Corrects (horizontal) keystone distortion of the screen. Adjusts the up and down edges of the screen so that they are parallel. The picture from the VIDEO jack is displayed as a sub-picture on the input screen from the PC connector. This function selects either the size of the sub-picture on - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 26
that extreme distortion cannot be corrected and in such cir- cumstances the projector should be placed to face the screen MENU straight on beforehand. (3) button. In the absence of operations for a period of about 10 seconds, the display will close automatically. Screen Example 2 Screen Example - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 27
of the Image and Video Movement This function digitally enlarges the personal computer image and video image (up to 10 times). (1) Press the is higher than the display resolution of the projector. * When "Aspect" is set to "Zoom" by the video signal. Note * Zoom and image movement functions - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 28
creases the volume. ZOOM VOL (3) To close the display immediately, press the CANCEL button. (2) In the absence of operations for a period of about 10 seconds, the display will close automatically. (1) Note When an image is not being projected, there will not be any sound even if the volume is - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 29
[Example of Menu Display Items at the Time of Input Signal Video Selection] Image Color View Aspect Filter Projection KeystVonKeeystone H Keystone Keystone Save Picture Adj. Fine Picture H Position V Position Color Tint Sharpness Reset Quick Color Adj. Gamma Color Temp. White Color System Color - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 30
Display Items at the Time of Input Signal Video Selection] Image Color View Setup Language Auto Source Auto Power Off On Screen Menu Position YPbPr Background Info. Power Off On Screen Menu Position YPbPr Background White Balance Status Factory Default Lamp Timer Reset Resolution Frequency Lamp - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 31
lighting voltage irregularity detection protector is activated and switch the power on again. If the problem still persists, unplug the power cable and contact Olympus Digital Technical Support. When the lamp burns out during operation: Blinks amber for 90 seconds and then is lit amber When the - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 32
the power cable and request service from Olympus Digital Technical Support. Blinks red (0.5 s lit / 0.5 s off) STATUS Lit amber POWER The lamp cover is open. The lamp cover is not attached properly. Attach it properly. Blinks red (1 s lit / 1 s off) STATUS Lit red POWER It is timer to replace - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 33
Troubleshooting Check the following matters before requesting servicing. Problem No power Check Reference Page * Has the power plug become disconnected from the E-16(S) outlet? * Is the lamp cover properly attached? E-31, 38(S) * Has the internal temperature become high? When the E-31, 32 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 34
31, 32(S) Brightness is uneven * When projecting a rather dark image, the brightness - may be uneven in different parts of the image. This is not a malfunction. If the problem is still not solved after checking the aforementioned matters, please contact Olympus Digital Technical Support. E-34 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 35
once a year. Failure to clean over a long period while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact Olympus Digital Technical Support. E-35 MEQNUIUCK AUTO STATUS POWER POWER SOURCE MENU - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 36
outside via the ventilation holes of the projector. Should the lamp burst, do not bring your face, hands, or other parts of your body close to the projector. Promptly request a lamp replacement and internal inspection from Olympus Digital Technical Support. • The inside of the high-pressure mercury - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 37
scratches. This will assist in lamp cartridge replacement. After replacement, return the projector to the original condition. 1 Disconnect the power cable. 2 Turn the projector upside down. 3 Remove the lamp cover. (1) Turn the screw that fastens the lamp cover counterclockwise until it turns - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 38
and press the SOURCE button and the ASPECT button of the main unit at the same time for at least 5 seconds. When reset, the STATUS indicator will go off. Please obtain a replacement lamp from Olympus Emporium. When ordering, please specify a VP-1 replacement lamp type V-120 (Stock No. 205201). E-38 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 39
Resolution Input Current Power Requirement Power Consumption Mechanical Dimensions Excluding Stand Weight Operational Temperatures Regulations Single Chip Digital Micro Device (DMD) 1024 ן768 pixels 120 W high-pressure mercury lamp Manual zoom (ן1.2), Manual focus F = 2.6 - 2.9, f = 27.5 - 33 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 40
E-40 - Olympus VP-1 | VP-1 User's Manual - Simplified Edition (English) - Page 41
(800)201-7766 Asistencia Técnica : Olympus Digital Technical Support (800)798-2777 llamada sin cargos Lunes a Viernes : 8 AM a 10 PM Eastern Time Dirección Electrónica : [email protected] Site : www.olympusamerica.com Para partes y accesorios : Olympus Emporium www.olympusamerica.com/store (800
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
E-1
Data Projector
VP-1
USER'S MANUAL (Simplified Edition)
Introduction
Congratulations on your purchase of the OLYMPUS VP-1 data projector.
Please read the USER'S MANUAL (Simplified Edition) and the USER'S MANUAL (CD-
ROM Edition) carefully and use the projector properly. After reading, please store in a safe
place.
IMPORTANT
Digital Light Processing, DLP™, Digital Micromirror Device and DMD are all trademarks of Texas
Instruments.
IBM,VGA,XGA are trademarks and registered trademarks of International Business Machines Cor-
poration.
SVGA is a registered trademark of Video Electronics Standards Association.
TMDS is a trademark of Silicon Image Inc.
Macintosh is a trademark of Apple Computer Inc.
Other names of companies and products mentioned are trademarks and registered trademarks of the
respective companies.
TM
, ® and © marks are not used in this document.