Olympus WS-801 WS-801 Detailed Instructions (English) - Page 85
Troubleshooting
View all Olympus WS-801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Troubleshooting Symptom Probable cause The battery is not loaded properly. Nothing appears on the display Battery power is getting low. The power is off. Action Verify that the battery polarities = and - are correct (☞ P.14). Charge the battery (WS-803, WS-802 only) or replace with a new battery (☞ P.14, P.16). Turn the power on (☞ P.19). Won't start Battery power is getting low. The power is off. The recorder is in HOLD mode. Charge the battery (WS-803, WS-802 only) or replace with a new battery (☞ P.14, P.16). Turn the power on (☞ P.19). Release the recorder from HOLD (☞ P.20). Low remaining memory. Erase unnecessary files (☞ P.45). Unable to record The maximum number of files has been reached. WS-803 only: Change to another folder (☞ P.26 to P.28). [Output] in the [FM Radio] settings is set to [Speaker]. Set [Output] to [Earphone] (☞ P.67). 7 The earphones are connected. Unplug the earphones to use the built-in speaker. No playback sound heard [Speaker] is set to [Off]. To output from the built-in speaker, set [Speaker] to [On] (☞ P.65). Recording level too low The volume level is set to [00]. Adjust the volume level (☞ P.36). The microphone sensitivity is too low. This could potentially be because the output level for the connected external devices is too low. Set [Rec Level] to [High] or [Middle] (☞ P.56). Adjust the output level for the connected devices. WS-803 only: The recording level has not been adjusted. Adjust the recording level and then try recording once more (☞ P.56). Troubleshooting EN 85